Used Butt Welding for sale (7,664)

Condition: used, Year of construction: 1978, sheet width . mm plate thickness . mm serial number 20719 Gjdoucgvaepfx Ah Eokd total power requirement . kW weight of the machine ca. 1,4 t

Year of construction: 2024, condition: ready for operation (used), A nearly unused complete factory for the production of battery housing frames is available. It features the following processes: handling, welding, riveting, Rivtac, screwing, gluing, sealing, measuring and testing. 1) Handling & logistic: component handling, feeding, transfer, positioning, discharge. 2) Riveting & Rivtac: stand riveting, Rivtac joining, fastener inspection. 3) Screw processes: pick & place double screwdriver, simultaneous triple screwdriver, final assembly screwing. 4) Arc welding: large block welding process, welding stations, fourfold clamping concept, rotation devices and trunnion fixations, automatic discharge for NOK. 5) Adhesive & sealer application: brushing & dry cleaning, adhesive application, sealer application, camera inspection and discharge for NOK. 6) Adhesive cleaning & surface preparation: dry tape cleaning and manual tape change. 7) Stud welding, positions: 7. 8) Measuring and testing procedures: geometry measurement before milling with NOK scrap, final measurement, seam inspection, leak test, final inspection, cap installation, leak station, laser marking with NOK scrap procedure. 9) Rework area: robot-supported leak test with sniffing method and 2x manual rework stations. The factory was hardly used and only approximately 1000 components were produced with it. Documentation available. An on-site inspection is possible. Gkedpfexwn Izsx Ah Eod

Condition: used, Year of construction: 2005, filter area: 126 m², suction capacity: 6,000 m³/h, Dust extraction, welding fume extraction, filtration ventilation, self-cleaning pneumatic vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. Donaldson Torit model: TDP 1350 Cartridge filter elements are pneumatically cleaned during operation with compressed air pulses, ensuring high device efficiency. The fan is positioned after the filter on the clean side, reducing explosion risk to a minimum. Year of manufacture - 2005 Fan power 7.5 kW Capacity 6000 m3/h Filtration surface area 126 m2 Inlet diameter - 315 mm Donaldson Ultra WEB filter cartridges – 6 pcs. Stock no.: 1026 Height - 3.80 m Width - 1.32 m Depth - 1.36 m Base: 1.25 m x 1.25 m Gjdpfxjw Hrxfj Ah Ejkd

Condition: good (used), Year of construction: 2017, functionality: fully functional, volume flow: 1,000 m³/h, pressing: 10,000 Pa, power: 5.5 kW (7.48 HP), TEKA Filtercube 4N 1000 MV filter extraction system, built in 2017, with pre-filter. Welding fume extraction, room filter, and laser extraction. Gkedjv T A H Ijpfx Ah Esd Motor power: 5.5 kW Flow rate: 1000 m³/h Max. pressure: 10,000 Pa Weight: 350 kg The system can be loaded with a forklift for transport. #8336

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: water, welding current at 100% duty cycle: 240 A, welding current (min.): 40 A, welding current (max.): 400 A, For sale: ESS SynMag 4000 40-400 AMP (100% 240A) 400 Volt Synergic Water-cooled 2/4 Step 4 Roller drive Godpfx Ajxqmy Aeh Eokd Fixed programs Steel – Stainless Steel weldable Refurbished, serviced, and tested. Including 3 meter welding torch, earth work cable with clamp, gas cable, interconnection hose, and 3 months warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), Year of construction: 2008, – Capacity 35 kVA – Pneumatic – Throat depth 400 mm – Control TE 90 Mark II – Documentation – 400V Gjdpew Tuirjfx Ah Ejkd

Condition: used, Year of construction: 2009, 2009 current intensivity 300 A wire dia. 1 mm sofort einsatzbereit 239836 Gjdpfeibd Uaox Ah Ejkd +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2013, condition: ready for operation (used), A self-built powder welding machine with a power source Kennametal and an MTA cooler for applying Stellite to valves is available. 1) Cooler MTA TAE EVO 10M, year of construction: 2013, cooling capacity: approx. 3kW, refrigerant: R407, filling quantity: 0.8kg, max. operating pressure: 28bar, flow rate: approx. 0.59m³/h. Machine dimensions X/Y/Z: approx. 600mm/600mm/800mm, weight: approx. 100kg. 2) Power source Kennametal Stellite PTA Junior Star, year of construction: 2013, open circuit voltage: 75V, welding current range: 10A/10V-250A/38V, protection class I. Documentation available. An on-site inspection is possible. Gksdpsxwn Nlofx Ah Eod

Condition: good (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 790 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 2,000 W, laser wavelength: 1,080 nm, Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 3 kW – Top Technology for Efficient Sheet Metal Welding Demonstration unit – excellent condition Discover the smart and powerful solution for precise laser welding: The Airtech handheld laser welding system with 3,000 watts of power! Perfectly suited for demanding sheet metal processing – efficient, safe, and highly versatile. Highlights and Features: • Power: 3,000 watts for superior welding quality and speed • Laser wavelength: 1080 nm, continuous mode with modulation frequency up to 20 kHz • Handheld laser welding head – ergonomically designed for comfortable operation • Robust housing, intelligent internal structure for maximum service life • Touchscreen display for intuitive operation • Optional automatic multifunctional wire feeder • Security features: Three-color alarm system, safety interlocks, misoperation protection mechanism • Cooling via separate water circuit with 13-liter tank capacity • CE-certified components according to European standards. Gsdpfxon Sl Dbj Ah Eekd Your Benefits • Safe operation thanks to comprehensive safety systems and alarms • Flexible applications, including automatic wire feed and robotic integration • Low operating costs and easy maintenance due to well-engineered technology and durable components For further information or consultation, the Airtech team is at your service!

Condition: new, table length 1220 mm table width 760 mm Godpfxexqrhls Ah Eokd table height 910 mm weight of the machine ca. 226 kg

Condition: refurbished (used), functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current (min.): 45 A, welding current (max.): 450 A, For sale: Rehm Synergic Pro² 450-4 45-450 AMP 400 Volt 2/4 Strep 4 Roller drive 30 Steps adjustable Spot welding Interval welding Fixed programs Steel and Stainless Steel weldable Refurbished and tested Including a PRO5000 welding torch, earth work lead, gas cable, 10 meter interconnection hose, and 3 months warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. Gkodpfx Asxqmuyeh Eed We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Year of construction: 1979, outer diameter: 76 mm, pipe diameter (max.): 76 mm, PRODUCT (PROFILE, TUBE) .. external diameter min.: 25 mm .. external diameter max.: 76 mm .. wall thickness min.: 0.7 mm .. wall thickness max.: 3.25 mm LINE CHARACTERISTICS .. welding process: HF inductive .. sawing process: travelling .. speed max.: 100 m/min ELECTRICAL SPECIFICATIONS .. mains power supply: 680 kVA For sale is a high-quality pipe welding line from the renowned manufacturer DREISTERN. Technical Data & Highlights: Line length: approx. 130 m Staff required: 6 operators Welding process: High-frequency welding up to 400 kHz Induction welding power: up to 250 kW Advantages: Robust and reliable design – suitable for continuous industrial operation Precise weld quality through state-of-the-art high-frequency technology Godpsxrklxofx Ah Eskd Ideal for the production of pipes in various dimensions Ready for immediate operation

Condition: used, Year of construction: 1999, ampere 330 A Gjdpfx Asw Syggjh Eokd mit Kabel

Year of construction: 2007, condition: ready for operation (used), A 4-head welding machine Rotox for window construction is available. Profile height range: 30mm-125mm, max. profile width: 140mm, min. welding length with/without gasket forming unit: 320mm/430mm, max. welding length without/with gasket forming unit: 4000mm/4000mm, min. welding width without/with gasket forming unit: 430mm/500mm, max. welding width without/with gasket forming unit: 3500mm/3500mm, welding bead limitation: 0.2mm-2mm, material: uPVC hollow bar profiles, weight: approx. 3100kg. Documentation available. On-site inspection possible. Expected to be available from the end of 2026. Godpfxexvru Ns Ah Ejkd

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Gsdpfjxp Iybsx Ah Ejkd Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: like new (used), Description of system area This is a pure component delivery Robot KR 8 R 1620 arc (HW) Gkodpfxjudb E Es Ah Ejd The KR 8 R1620 arc HW industrial robot stands out in its class thanks to its high flexibility and long reach with optimum payload capacity. Furthermore, the robot was specially designed and developed for the welding process. - Nominal payload: 8 kg - Maximum reach: 1621 mm - Number of axes: 6 - Position repeatability (ISO 9283): ± 0.04 mm - Installation position: any angle, floor, ceiling, wall - Protection class (IEC 60529): IP54 - Degree of protection central hand (IEC 60529): IP54 - Hollow shaft The robot mechanics are supplied in the color R0000 KUKA Orange. The color of the base frame differs depending on the robot model (exception: KR 3 AGILUS and KR AGILUS-2, delivered with grey base frame). Linear unit KL 250-3 1CA (carrier length = 8m/ stroke = 7.1m) -further data on request-

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. turning speeds 0,6 - 6,0 U/min swivelling range 0 - 90 Grad Gsdpfx Ahsxabm Ns Eokd bore 60,0 mm motor 230 Volt weight of the machine ca. 56 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: used, functionality: fully functional, Year of construction: 2019, control type: CNC control, For sale: CNC stud welding system Manufacturer: AS Schweißtechnik GmbH Type: AS CNC 1000 x 2000 S/N: 2198149 Power: 6.4 kW Table size: 2,000 x 1,000 mm 2 stud welding units by Arnold, Type 1095MC-I 2 vibration feeders, Type: VBZ5000 Light barrier system Control: Beckhoff Used, fully functional condition. Collection by buyer; assistance with disassembly/transport can be arranged if required. — If you are interested or have any questions, feel free to send me a message. Inspection on site by appointment. Other metalworking machines available, such as bench drills, press brakes, column drills, eccentric presses, heavy-duty racks, welding tables, shielding gas welding machines, compressors, etc. – please check my other listings. Gkedpsxvqrtefx Ah Ejd or Net export Collection only – disassembly and transport by buyer or by arrangement If you are interested or have any questions, feel free to send me a message. Additional photos and technical details available on request. All information without guarantee or warranty, errors and prior sale excepted. For further information, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration formalities for a fee. We can deliver vehicles to the port for an additional charge.

Condition: used, Year of construction: 1986, table length . mm table width . mm table load 3 t Gedpfx Aoucguijh Ejkd turning speeds Poti U/min weight of the machine ca. 2 t

Condition: excellent (used), Water-cooled, pneumatically operated rocker arm spot welding machine Manufacturer: DALEX Model: SL 25-1 Rated power at 50% duty cycle: 25 kVA Gkodpfxsxvh Hbo Ah Eed Secondary short-circuit current: 22.4 kA Secondary open-circuit voltage: 1.8 - 5.2 V Electrode force: 278 daN Arm gap: 140 or 300 mm Arm reach: 180-500 mm With attached control cabinet according to VDE 0100 With main switch Synchronous welding control MPS 15036

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Godpfjxp Iw Hjx Ah Eskd Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W @ 9400 nm / 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Scale): 1% Full Scale: 1.0 ms 10% Full Scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Maximum Position Resolution: 18 bit for XY, 16 bit for Z* Non-linearity: < 2.1 mrad / 44° 8-Hour Drift (after 30 min warmup): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Supply Voltage: (48±2) V DC, up to 10 A each (20 A peak) Mechanics Scan Axes: 3-axis system with integrated varioSCAN Housing Versions: Scan head Connector Positions: Opposite beam exit Weight (without lens, standard housing): 35 kg Dimensions (L x W x H, standard housing, with varioSCAN): (433 x 268 x 266) mm³ Beam Offset: 72.72 mm Other Features Water Cooling: Yes Air Cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) Shipping & Collection: Secure pallet shipping (upon arrangement) or local pickup possible. Feel free to contact us by phone for further questions.

Condition: good (used), Welding or assembly table, 2760mm length x 1960mm width x 360mm height, plus legs total 4500kg. Gedevdklgjpfx Ah Eokd

Condition: new, Year of construction: 2025, OREE 3in1 from stock europe the Oree OR-HW is the most modern Laser - Welding - Cleaning and Cutting machine in one. Gsdpfxok Radij Ah Eekd Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A cleaning machine and a welding machine from 1,5 Kw together cust atlast 33 till 38.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting steel and other materials. when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1 - 1,5 - 2 and 3 Kw include wire feeder include in the price 1 till 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. we deliver in complete Europe and have in 3 locations in europe a sales and service organisation.

Condition: new, Year of construction: 2025, load capacity: 15,000 kg, Column-type turning device with 15-ton load capacity, available as a set or individually. 2 sides are driven. Machine is offered as a synchronized set or individually. Protec turning device / positioner Syncrolift. Double-column design, wireless and manual hand remote control. Column adjustment: both columns electrically movable. Load capacity: 15,000 kg, 360° rotation. Torque: 21,000 Nm. Minimum working height: 800 mm. Maximum working height: 1,700 mm. Rotation speed: 0.5 rpm. Clamping plate diameter: 1,000 mm. Rotational drive: 2 x 2.2 kW motors. The price refers to one unit with electric trolley included. The second unit as part of a set is 20% cheaper. Optional with articulated flange (cardan flange) upon request. Gsdpfx Ahsw Nilae Eskd

Condition: excellent (used), Pneumatically operated, water-cooled spot welding gun Brand: DALEX Type: 3328-4 Rated power at 50% duty cycle: 25 kVA Secondary short-circuit current: 17 kA Gsdpfx Ahoxvh E Ds Ejkd Electrode force: 280 daN Arm gap: 130 mm Arm reach: 500 mm With double-stroke cylinder: long stroke 60 mm, pre-stroke 40 mm, working stroke with adjustable lift 0-20 mm With cardan suspension and suspension bracket 10 m connection and control cable incl. remote control 1536 The spot welding gun has been tested but still needs refurbishing. Sample photo.