Used Cable Duct for sale (5,086)

Condition: used, Year of construction: 2005, Compact roll production line WP Rollprofi Year of manufacture: 2005 Condition: refurbished, cleaned & inspected Suitable for the production of sliced rolls, plain round rolls, long-rolled rolls, and double rolls Codpfoz A Sd Ujx Aknshc Weight range: 30-85 g Hourly output: max. 3,750 pieces 4-row system with 600 mm working width Integrated dough divider and drum rounding machine, Multimatic Pre-fermentation time: 12 min (6 min before the long-rolling station and 6 min between the long roller and the cutting station) Proofing drying Maintenance-free proofing chain with automatic tensioning Variable depositing device for proofing trays of the 3 Euro sizes: 400x600 / 580x780 / 580x980 mm Sterilization station Siemens touch screen control Dimensions (LxWxH): 3000x1250x2550 mm

Year of construction: 2011, condition: like new (used), Please notice that the entire factory with land and buildings is for sale! List of devices for the pellet production line No. 1 (with a drying line) No. Device name set. Description DRYER LINE: - bale feeder - length 9m - Rotogrin RSC B 36-132 shredder - chain scraper of wet raw material - length 12m - V500 wet raw material screw conveyor - 4 kW - drying cyclone with a rotary dispenser - 4 kW - dryer exhaust fan - 55 kW - a stove with an emergency chimney - 2.2 kW - SBP-2500 dryer drum - 5.5 kW - fuel dosing system with a container + burner - 5.9 kW - ignition detection system - extinguishing system - electrical installation, sensor system, wiring - control cabinet and automation Passat straw chopper 3 x 15 kW Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan 4 bar Buffer tank with feeders Conditioner ANDRITZ CM 1101 11 kW, 750 rpm Granulator PM 30 ANDRITZ 315 kW, 1500 rpm Automatic Roller Lubrication System Pellet cooler MOGENSEN G 1014 Screener A set of transport routes for the production line (pneumatic feeders, scraper and bucket conveyors MINIMAX spark detection system with control unit Control panel with software Chodpfjim I Ruox Aknjc Power and control cabinets, wiring List of devices for the pellet production line No. 2 No. Device name set. Description Bale feeder - Length 9 m Rotogrin RSC B 36-132 chopper Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan - 4 bar ANDRITZ CM 1101 conditioner 11 kW, 750 rpm Granulator PM 30 ANDRITZ + lubrication system - 315 kW, 1500 rpm Pneumatic feeders from the hammer mill to the filter Power and control cabinets, wiring

Condition: excellent (used), Complete line to produce pancakes, crepes and blinis. Carousel hot plate system. In excellent condition. Chedpex Hailofx Aknoc

Year of construction: 1980, condition: used, Rolling mill in working condition, designed for the production of hot-rolled metal products: reinforcing bars, rounds, squares, angles, flats, channels, and beams. Maximum initial blank diameter: 180 mm. Cjdpfx Akez Eq Nujnehc It consists of a three-roll roughing stand with a diameter of 600 mm and five finishing stands with a diameter of 320 mm, as well as a calibrating three-roll stand with a diameter of 320 mm. High productivity. Cantilever-type rolling rolls are used. They are inexpensive to manufacture and can be quickly replaced when switching from one type of rolled product to another. Location: Ukraine, Sumy. Dismantling and loading are included in the price.

Condition: used, Tenoning spindle 2 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum IV 68 Entrance Doors Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 10 NC Window System ----- Cross-cut Saw ----- with laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom rounding unit ----- Axial adjustment travel: mechanically coupled with cut-off saw 1st Tenoning and Slotting Spindle ----- Motor power (with brake): 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position (below table): 5–10 mm Radial adjustment travel: fixed 2nd Tenoning and Slotting Spindle ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 320 mm Axial adjustment travel: NC axis Radial adjustment travel: NC axis Home position (below table): 5–10 mm 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm 2nd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Horizontal Profiling Unit (Top) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool cutting circle: 130 mm Pneumatic adjustment: 8 positions (axial and radial) 3rd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Cjdpfx Aezawizoknjhc Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Vertical Profiling Unit (Right, at Machine End) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 160 ...

Condition: excellent (used), Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 40/50 mm Weinig Unicontrol 6 ----- Machine will be checked in our factory before delivery! Technical Data Summary (Please inquire about any additional accessories included) Csdpfsxtvgkox Aknshc Item 1: Cut-off saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for identifying the saw cut CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Maximum tool swing diameter: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (co-rotation and conventional) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-dividing muntins) Munch guide consisting of: Munch support strip from above in the area of ??the vertical right-han d profile milling unit and profiling spindle. Item 5: Horizontal top profile milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Spindle speed: 5,850 rpm > Maximum tool swing diameter: 130 mm > Axial travel: 52 mm, indexed in 2 positions > Radial travel: 125 mm, indexed in 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial travel: 90 mm, indexed in 3 positions > Radial travel: 100 mm, indexed in 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Maximum tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-out-free rebating > Double part package > Return conveyor for 1-person operation: swivel conveyor > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Tenoning spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Grooving device from above 80 mm Hardware spindle 120 mm -----...

Condition: not inspected (used), Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table ..... The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate ..... > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length stop ..... > Length 4500mm 1. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered 2. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless Chjdpfxeyrtzke Aknjc > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered transfer tape ..... Included for transferring the parts to longitudinal processing Separation of double parts before entering longitudinal processing. 1. Profiling spindle (synchronous and counter-rotating) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 3. Profile milling unit (grooving device from above) ..... > Position: horizontally above > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless > Spindle speed: 9000 rpm > Tool flight circle max.: 130 mm ...

Condition: new, Year of construction: 2024, 7.5 kW electric motor V-type log feeding system Set of additional rollers Set of pneumatic side discs Cutting dimensions Max. log diameter: 400 mm Min. log diameter: 100 mm Max. log length: 3.6 m Min. log length: 1.2 m Max. cutting width: 250 mm Min. cutting width: 7 cm Headstock equipment Automatic cutting width adjustment device (Setworks) Headstock adjustment: electric Blade cleaning system: LubeMizer Blade tensioning system: hydraulic Heavy-duty log clamping rollers Spiked rollers Blade Length: 4670 mm Width: 32 mm, 35 mm, 38 mm Thickness: 1.07 mm, 1.14 mm, 1.27 mm, 1.40 mm Blade guide wheels Diameter: 600 mm Type: with belt Cjdpfx Akeztnaionehc Feeding system Speed: 0-20 m/min

Condition: ready for operation (used), TETRA ALCIP 10 CIP WASHING UNIT YOM 2004 LOCATION - POLAND EXCELLENT CONDITION Chodpfsz Dpumox Aknec

Condition: new, Pressure pipe to bridge a road without hindering traffic. Ideal during drag hose fertilization or water and sludge transport. Status: New Cjdpfx Akjykcd Sjnehc

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 4000mm Chedot Txfpspfx Aknsc Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 2700mm Max working height: 180mm Max working width: 500mm Chedpfx Aot Tw S Uoknoc Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: excellent (used), CATALOGUE NUMBER 7816 TECHNICAL DATA DDCA - length of the sanding belt: 180 – 845mm - width of the sanding belt: 30 – 75mm - thickness of the sanding belt: 10 – 45mm - spindle diameter: 30mm - max. disc diameter: 250mm - 5 spindles: - left side: 1) vertical upper 2.2kW 2) horizontal lower 2.2kW right side: 1) vertical lower 2.2kW 2) vertical upper 2.2kW 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - material clamping device: 2 pcs - stepless feed speed adjustment: 0-10m/min - spindle diameter: 5x100mm - dimensions (L/W/H): 1870/2230/1320mm DDGA - width of the workpiece: 35 – 130mm - thickness of the workpiece: 10 – 40mm - minimum length of the workpiece: 200mm Chodpfxozx Rkzj Aknjc - spindle arrangement: 1) lower 5.5kW 2) right 5.5kW 3) left 5.5kW 4) upper 5.5kW - spindles adjustable up/down - 6-knife cutter heads mounted on the upper and lower spindles - spindle diameter: 40mm - milling cutters mounted on the right and left spindles, max. diameter: 50mm - spindle diameter: 30mm - 2 feed speeds: 4.9kW - central chain lubrication via an oil pump - spindle diameter: 4x125mm - dimensions (L/W/H): 3100/1300/1700mm ADVANTAGES - Polish production - 5 spindles - unpainted - very good condition - used production line Net price: 52900 PLN Net price: 12302 EUR Net price calculated based on the exchange rate of 4.30 PLN/EUR (price may be subject to change in the event of significant exchange rate fluctuations)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 3823954597, Year of construction: 2019, We are offering 3 sets of ready-to-use SolarMark EFLS industrial lasers, manufactured in 2019. Manufacturer: e-SolarMark Type: EFLS Serial number: 3823954597 Date of manufacture: 05-2019 Price per set. The e-SolarMark eFLS fiber laser is a versatile industrial laser designed for marking a wide range of metals and plastics, including HDPE, OPP, ABS, stainless steel, and titanium. It can be used for both static and dynamic marking. Its compact integration dimensions make it suitable for installation on production lines. This laser coder is made with a fully stainless steel industrial design, making it suitable for use in various industries, including electrical, food, bottling lines, automotive, chemical, cosmetic, dairy, healthcare, and construction. Cedpfjz D T Iqjx Aknehc Suitable for Datamatrix code marking. High marking speed. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2019, CAP 30 APPLICATOR 1000 SLIM FOR HELICAP 23 PRO: Chedpfjyynd Rex Aknjc YOM 2019 VERSION 400v 9.000 RUNNING HOURS NEW CONDITION

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (max.): 208 g/m², paper width (max.): 350 mm, paper height (max.): 500 mm, production capacity: 4,500 unit/h, No minimum price – guaranteed sale to the highest bidder! Auction of a brochure production line! TECHNICAL DETAILS Gathering towers Models: Horizon VAC-100a / VAC-100m Number of towers: 2 Stations per tower: 10 Feeder system: Air suction feeder Voltage: 230 V Frequency: 50 Hz Current draw: 10.4 A per section Booklet making and folding module Model: Horizon SPF-200A Voltage: 230 V Csdpfx Aozy Hhxjknohc Frequency: 50/60 Hz Current draw: 3.4 / 3.2 A Booklet making heads: 2 Brochure thickness: up to 4.5 mm Functions: Wire stitching and center folding Front trimmer Model: Horizon FC-200A Function: Automatic front trimming Operating mode: Inline operation with Horizon SPF-200A Cutting quality: High-precision cut Stacking unit Model: Horizon ST-40 Voltage: 230 V Frequency: 50 Hz Current draw: 4.7 A Function: Automatic stacking of finished brochures Production capacity: max. 4,500 brochures/h Feeder stations: 10, expandable to max. 60 Sheet format max.: approx. 350 × 500 mm Paper weight: 52–208 g/m² Booklet thickness: max. 2 mm for saddle stitching Processing: Gathering, stitching, folding, and stacking in one system MACHINE DETAILS Production counter: approx. 1,800,000 brochures EQUIPMENT Horizon VAC-100a gathering tower Horizon VAC-100m gathering tower Horizon SPF-200A booklet making and folding module Horizon FC-200A front trimmer Horizon ST-40 stacking unit Data sheets for the individual components of the system, including further detailed technical data, can be found in the appendix.

Condition: excellent (used), Year of construction: 2018, operating hours: 10,000 h, Weinig production line CONTUREX C 125 Year of manufacture: 2018 Approx. 10,000 operating hours Technical data and more images available upon request. Chjdoy Emrkjpfx Aknoc

Condition: good (used), Inductive sensor, electronic sensor, safety switch, inductive proximity switch, proximity sensor, Namur sensor -Manufacturer: Bernstein, Inductive proximity switch -Type: M30AS/010-LSD Csdpfx Aksuypyfenohc -Number: 5x sensor available -Price: per piece -Dimensions: 115/55/H36 mm -Weight: 0.3 kg/piece

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, REF: MM5770 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Cedpfx Asulpmzsknehc Manufacturer - Cime Careddu Srl Model - SILVER 16/16 (16 x heads). Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until January 2025, can be viewed working until this point. This unit is a very reliable system and has been very well maintained, used for 30-40 hours (approx) per week. 

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Manufacturer - Borelli Group S.r.L ✅ Model - RMC10. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar. Csdpfxjx Dbkcj Aknohc

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a complete, modern production line for manufacturing and processing electric motor stators, produced by the reputable NIDE Group (year of manufacture: January 2017). The machines are fully automated (CNC/PLC control) and formed a cohesive production flow within the facility. The equipment has CE certification. Codpozuukqsfx Aknehc The complete line consists of 5 processing stations: Coil Winding Machine: Model RXL2-160. Winding Inserting Machine: Model QX1-150/160. Middle Forming Machine: Model Z2XJ1-160/190. Double Side Lacing Machine: Model BXIIL1-160/160 (with a rotary table integrated into the process). Final Forming Machine: Model Z3XJ1-200/210T (with its own hydraulic power unit). Along with a comprehensive set of tooling! We also sell the original toolboxes containing mandrels, forming heads, and dies, which enable quick changeovers for production (as seen in the photos). The line is ready for loading from the warehouse in Ostrzeszów. Please contact us.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Offered for sale is a Komet ISG3100 shrink fitting machine for the precise and rapid shrinking of tools in shrink chucks. The device is ideally suited for use in CNC machining, toolmaking, mold making, and modern cutting processes. Thanks to the induction technology, tools can be quickly and reliably shrunk in and out. The compact design and ease of operation make the device an efficient solution for daily tool preparation. Features: Manufacturer: Komet Type: ISG3100 Induction shrink fitting technology Codpfx Aszu Ikkjknohc Fast heating of shrink chucks Simple and safe operation Suitable for various tool holders Compact and robust industrial design Ideal for CNC machining and tool management Advantages: High concentricity accuracy of the tool holders Fast tool changes Reliable tool clamping Reduction of setup times Long service life of the tool holders Suitable for series production and single-part production with various holders from HSK30 to HSK100 Used, fully functional. Shows signs of wear consistent with its age.

Condition: excellent (used), Year of construction: 2010, Ultrafiltration plant for fermented products 3 Main items: 1) Thermization unit 2) Ultrafiltration (UF) for fermented milk 3) Cooler and Silo. The line is used to produce Quark/Skyr. The thermization and ultrafiltration unit are also suitable for producing other fermented and concentrated dairy products such as: Skyr, Mascarpone, and Double Cream cheese. Key data: - Input: 3,500 - 5,000 liters per hour of fermented skim milk, full-fat milk, or enriched products. - Concentration factor: 1.8-2.5 1) Thermization unit Complete skid-mounted thermization unit. Flow rate: 3,500 up to 5,000 liters (depending on the product). Manufacturer: Tetra Pak Temperature cycle: Input: 21-30 °C (incubation temperature) -> recuperation (permeate cooler) -> thermization at 55/60°C or pasteurization at 72/95 °C -> holding -> output to ultrafiltration at approx. 45 °C. Complete unit including: * Stainless steel frame in which everything is pre-assembled. * Closed balance tank with spray bowl. * Centrifugal product pump, stainless steel casing, flush seal, type: LKH. * Plate heat exchanger, 4 stages, new, Tetra Pak, Clip6-SR Model. * Control box with all connections for sensors and pneumatic valves. * Holding tube for 5,000 liters per hour, adjustable by connecting more or fewer tubes: 30 seconds up to 180 seconds in 9 stages. 2) Ultrafiltration unit Manufacturer: Tetra Pak Type: Tetra Alcross US P&F Serial number: T5845810096 Year: 2010 Capacity: Input up to 5,300 liters/hour Description: Concentrates yogurt or fermented milk to achieve the desired composition and texture. The UF separates the product into retentate and permeate. The retentate is the product, with proteins and fat (if included) concentrated. The advantage of this design of UF (compared to spiral-wound UF and separators) is that it is suitable for fermented products with and without fat. Also, all proteins are concentrated (even whey proteins). This results in high pressures in the system; filtration can only be achieved with a plate and frame filtration system with flat FR60pp filters and rotary piston circulation pumps. Some example products that can be made with this system: Input: skim milk 9% TS -> output approx. 16% TS (Skyr). Input: 20% TS including fat -> output: cream cheese or mascarpone. Input: pre-concentrated fermented skim milk up to 12% TS -> output up to 18% TS (Quark). The limiting factor is the permeate output. Approximate permeate per stage: Stage 1: 1100-1755 liters/hour, 13.5 m2 filters. Stage 2: 675/1170 liters/hour, 9 m2 filters. Stage 3: 320/585 liters/hour, 4.5 m2 filters. Stage 4: 300/585 liters/hour, 4.5 m2 filters, 15 bar. Filter: plate and frame type, manufacturer: Tetra Pak - DDS, model: M37 Complete unit including: * Stainless steel frame. * 2 balance tanks with spray bowl (feed and permeate return). * Feed pump Tetra LKH. * 4 circulation loops including circulation pumps. First stage with centrifugal pump, 3 stages with Waukesha 320-U2 rotary piston high-pressure pumps. Last stage up to 15 bar pressure for highly viscous products. 3) Quark silo, cooler, and pump. Manufacturer: Schwarte-Milfor Type: Quarksilo Serial number: 3580 Year: 2011 Capacity: 5,000 liters Description: Robust conical design for very viscous products. Insulated. Hermetic, ultra-clean with sterile air. Sensors for level and temperature. On inlet: - Plate cooler Chjdpsz Imdaefx Aknoc Manufacturer: Tetra Model: Clip line C6 Thermal cycle: 45 -> approx. 18°C

Condition: ready for operation (used), Year of construction: 1995, A custom-built multi-stage nonwoven line for the production of two-layer or multilayer technical nonwovens made of synthetic or natural fibers with free-flowing materials such as herbs or seeds is available. Material weight range: approx. 100g/m²-1000g/m², needle machine manufacturer: Dilo, max. roll width: 2100mm, max. production speed: 200m/h, needling capacity: approx. 1200strokes/min, main motor: 45kW Siemens, total system dimensions X/Y/Z: approx. 10m/4.5m/4.5m. Process steps: nonwoven web feeding, carrier nonwoven feeding, material feeding (herbs), material dosing, material distribution, top nonwoven laydown, needle station, cutting/to length cutting, winding/rewinding, dust extraction. Documentation available. An on-site inspection is possible. The line is complete including accessories, peripheral equipment and a small sample needle machine. Chodpfx Aeyt N Dqeknjc

Condition: used, Year of construction: 2004, functionality: fully functional, REF: MM6444 Cimec America AM DPS 9-8-1C-1VA rinser, filler and capper monoblock. Manufacturer: C.I.M.E.C., Italy. Serial number 045, built 2004. CE marked, with EU Declaration of Conformity. A compact monoblock with 9 rinsing nozzles, 8 isobaric (counter-pressure) filling valves, a crown capping head and a ROPP capping head, for still or carbonated drinks in glass bottles. Carbonated product needs to be carbonated before filling. The machine does not include a carbonator. Filling Single pre-evacuation with CO2 bottle purge (not double pre-evacuation) No vacuum pump fitted Up to 2,000 bottles per hour (owner's figure), depending on bottle size and product Capping ROPP (screw cap) head enabled, set up for 28mm ROPP caps on MCA bottle finish Crown capping head disabled. The current owner never used it and its condition is unknown. An engineer would need to assess what is required to bring it back into use Change parts 330ml, currently fitted 200ml Chjdpfx Akjy Um Anonjc Not included Conveyors, drive or accumulation table CIP system Also included Spare seals, wear parts and spares for the filling heads, pedestals, rinser and drive train Spare parts list Condition Last in production in August 2025, when it was fully operational. Now in storage. The owner describes the machine as well used and in working order, but needing an engineer to get it fully up to speed. Videos of it running are available on request. Electrical 400V, 50Hz, 3-phase, 4.5kW Dimensions Approx. 3.5m long x 1.4m wide x 2.1m high (2.6m at the capper) Weight: to be confirmed. Documentation EU Declaration of Conformity and operator manual (English) for this serial number. Location Aylesbury, UK. (in storage) Viewing by appointment