Used Calibrate for sale (856)

Condition: used, Year of construction: 2003, Dimensions (LxBxH): 70 x 150 x 140 cm Nodpswqcicjfx Agzjwn Current frequency: 50 Hz Voltage: 380 Manufacturer: Zanchetta Model: Piraña Year: 2003   Type : Calibrator for granulated or wet products Applications: pharmaceutical, food, chemical, cosmetics …   Installed electrical power: 3 kW Power supply : 380V – 3 phases – 50 Hz Motor speed : 1440 rpm Dry air consumption: 15 L/min at 2.5 bars Available basket diameters: min Ø 800µ – max 4500µ Treated product moisture content: max. 10 %. 10 % Noise level: Dimensions: 700 x 1500 x 1400 mm Height to drum axis: 900 mm Product infeed diameter : 150 mm Product outlet diameter : 150 mm Control panel with speed variation Paper documentation available

Condition: good (used), Year of construction: 2009, functionality: fully functional, Sanding width 1100mm Workpiece thickness 3-160mm 2 sanding units 1st unit: Calibration roller Njdpswkuwxsfx Agzjwn 2nd unit: Combination roller-shoe Texturing brush unit

Condition: ready for operation (used), Features Operating range -25 °C to 150 °C Precise temperature control Overtemperature and low level protection Safety class III/FL (DIN 12876) Powerful pressure/suction pump Programmer with calendar and clock functions 2-point calibration Pt100 sensor connection Natural refrigerant Nwsdoxqq Nnspfx Agzsn Weight 25 kg

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 1438016140010, Checkweigher Nwsdpfx Ajxnmy Rjgzsn Mettler Toledo / Garvens Model C3570 Year built: 2020 Weighing capacity: 360–1400g Calibration still valid Software included

Condition: ready for operation (used), Year of construction: 2019, A CNC 5-axis high-speed milling machine Maxiport Corporation is available. Travel X/Y/Z: 800mm/1010mm/650mm, speed: 20000rpm, torque: 120Nm, drive power: 35kW, tool holder: HSK-63, tool positions: 96, tool changer: double gripper, rotary table diameter: 800mm, weight: approx. 19000kg, control: Heidenhain TNC 640, operating hours: 6905h, running hours: 2215h. Including Heidenhain TS460, chip conveyor, Blum tool measurement, 50bar ICS with coolant system, Heidenhain KinematicsOpt with calibration sphere KKH250, extraction system Filtermist FX4002, and tool package. The machine has a defect that will be repaired before sale. Documentation available. An on-site inspection is possible. Nwjdpjxn S Tcefx Agzsn

Condition: used, This listing is for the Sartorius LA620S balance Nwedpfjxl E Nlox Agzsn The unit is in full working condition and is ready for immediate use The Sartorius LA620S is a high-precision top-loading analytical balance designed for laboratory environments requiring accurate and consistent measurements. Part of the Sartorius LA Reference series, it is renowned for its durability, precision, and advanced weighing technology. Built-in Application Programs: Density determination, statistics, calculation by a factor, animal weighing, weigh averaging for unstable conditions, ± weighing, counting, net-total formulation, and weighing in percent User-Friendly Interface: Plain-text prompts and ergonomic, tactile keys for error-free data input Advanced Calibration: Fully automatic calibration and adjustment function (isoCAL), with memory for up to 50 ISO/GLP-compliant calibration records Enhanced Durability: Metal housing and proprietary monolithic weigh cell technology ensure resilience for daily use

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, working width: 1,350 mm, overall weight: 10,000 kg, input current: 153 A, Heesemann LSM8 Surface Sanding Machine QLkLBw Sanding width: 1350 mm CROSS/LONGITUDINAL/LONGITUDINAL Machine Base Conveyor unit with a single transport belt, adjustable feed speed from 3 to 15 m/min by frequency inverter, including transport belt cleaning device. Constant working height of 920 mm. Automatic adjustment for various workpiece thicknesses (3 - 80 mm) via motor-driven movement of the upper machine section. The lifting gear’s toothed belt is dust-protected, and its operation is monitored via the integrated control cabinet. Nwjdpfx Agjxp Hvnszon 1. Cross Sanding Unit Belt dimensions: 5,400 x 150 mm Drive power: 13/17 kW Sanding belt with additional blast tube for belt cleaning, wear-resistant brake unit, pressure segment belt system, intermittent belt cleaning system, and belt alignment control. Includes a door with glass window. 2. Longitudinal Sanding Unit Belt dimensions: 2,620 x 1,350 mm Drive power: 13/17 kW Belt with double cleaning nozzles, wear-resistant brake unit, automatic belt length compensation, sanding belt operation counter to feed direction, intermittent belt cleaning, and infrared belt control. The front roller (steel) has an eccentric bearing for light calibrating, controlled from the operator terminal. 3. Longitudinal Sanding Unit Belt dimensions: 2,620 x 1,350 mm Belt speeds: 0.5 – 18 m/s Drive power: 17 kW with frequency inverter Continuously adjustable sanding belt speed, double cleaning nozzle setup, wear-resistant brake unit, automatic belt length compensation, counter-feed direction sanding, intermittent belt cleaning, and infrared belt control. 4. Brush Roller Unit Centrally height adjustable, includes extraction hood and press-on roller. Roller diameter: 150 mm Drive power: 1.5 kW Bristles: fiber 5. Workpiece Suction Device Ensures safe transport of workpieces shorter than 500 mm in the feed direction, with integrated extractor fan. Voltage: 400 V, 50 Hz Belt exchange: left Operator terminal: left 6. Ionization Bar (from above) Removes static electricity, including high-voltage transformer. 7. Workpiece blow-off device with rotating compressed air nozzles inside the frame. The machine is ready for operation at your facility after mechanical and electrical overhaul by an authorized Heesemann service partner. Fitted with a new conveyor belt. Commissioning and training at your site may be arranged subject to negotiation. Transport costs negotiable – loading included in the price. If you have any questions, feel free to contact me. Paweł Szczepański +48 795 517 258

Condition: excellent (used), Frame Micrometer Brand: Mitutoyo Measuring range: 400–425 mm Mitutoyo 103-153 OM 425 Nwsdpjxdwczjfx Agzjn with calibration gauge Stock number (28669) with original wooden case 685 x 400 x 45 mm

Condition: excellent (used), Working width 650 mm, combination unit with calibration roller and shoe, two feed speeds, belt oscillation, electric table adjustment, material gauge Nodpsxp Dtqefx Agzswn

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 12,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 35 mm, sheet thickness aluminum (max.): 25 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 5,500 kg, door opening width: 3,000 mm, door opening height: 1,000 mm, Equipment: cabin, documentation/manual, New 12 kW Fiber Laser Cutting Machine Our goal is to offer highly precise, long-term stable, yet affordable laser machines. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included, as well as first-class service. - Includes on-site commissioning and training at your facility (approx. 1 week) - Price includes freight to your facility - Machine with automatic shuttle table - Machine bed lined with graphite plates - Machine measured and calibrated with Renishaw system (including measurement protocol) - Very space-saving design - Extremely energy-efficient cutting system - Only approx. 8.5 x 3.5 meters required installation footprint - 12 kW laser source from MaxPhotonics (G5/German specification) - Top quality – schedule a viewing now! Nodsxg Dn Aopfx Agzjwn Cutting capabilities: - Steel sheets up to 35 mm - Stainless steel sheets up to 20 mm - Aluminum sheets up to 20 mm - Travel range: 1500 x 3000 mm - Machine controller in German - Safety light curtain for maximum operator protection - Extensive collision protection measures for the cutting head - Large laser safety windows on three sides for monitoring the cutting process - Automatic, programmable 3-gas switching (compressed air, nitrogen, oxygen) - Comprehensive cutting parameter library - Includes nesting module - Very easy to operate - Powerful laser chiller - Machine controller in German - Extensive service and warranty - Powerful laser chiller - Optional filter extraction system Sale exclusively to commercial customers. Delivery, consultation, and sales only within Germany / Austria / Switzerland. Approximate machine dimensions: Length: 8.5 m Height: 2.3 m Width: 3.5 m Total weight: approx. 5500 kg Need a different laser power, table style, or table size? No problem. I will gladly provide a suitable quotation. For example: 2 kW machine from €29,990 6 kW machine from €79,900 Not sure which laser power is suitable for your application? Just call! Of course, I can perform cutting tests according to your requirements. There is a wide range of possibilities.

Condition: used, mileage: 230,811 km, power: 115 kW (156.36 HP), fuel type: diesel, gearing type: automatic, overall weight: 7,490 kg, first registration: 05/2020, next inspection (TÜV): 05/2026, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 2,280 mm, loading space volume: 35 m³, emission class: euro6, color: white, number of seats: 2, Year of construction: 2020, Equipment: ABS, electronic stability program (ESP), tail-lift, ATEGO 816 L Refrigerated Box Truck 6.20 m with Tail Lift 1.5 t * CARRIER Xarios 600 road refrigeration * Side door at rear right * Vehicle No. for customer inquiries: 4455 * Active Brake Assist * Engine Version Euro VI, D * Lane Keeping Assist * Tail lift * Air suspension, rear axle * Air deflector, without base trim, lockable * Rain/light sensor * Electronic Stability Program (ESP) * Electronic braking system with ABS and ASR * Comfort driver's air-suspension seat * Electric windows, both sides * Mercedes PowerShift 3 * External sun visor, transparent * Cruise control * High storage compartment on engine tunnel * AdBlue tank 25 l * Roof hatch/ventilation flap * Transmission G 70-6/5.94-0.74 * Weight variant 8.6 t (3.8/5.7) * Main mirror, electric, driver's side * Heater, electronic compressed air supply unit Njdpfx Aoxn D E Degzown * Plastic tank 120 l, left side * Engine OM934, R4, 5.1 l, 115 kW (156 HP), 650 Nm * Wheelbase 4220 mm * S-Cab ClassicSpace, 2.30 m, tunnel * Stabilizer for extreme high load, rear axle * Front parabolic spring 4.0 t * Pre-equipment for toll detection * Tubeless tires, 235/75 R 17.5 front axle * Digital tachograph, 2nd generation, ADR * Environmental badge (green) * Two-seater * Full service history * 2/3-door No liability for typing or printing errors Sale to trade customers only Subject to change and prior sale* Modifications, prior sale and errors expressly reserved. The description serves to identify the vehicle and does not constitute a warranty in a legal sense. The description in the purchase agreement is binding. * TOP SERVICE + QUALITY * We can provide a LEASING-FINANCING-HIRE PURCHASE offer on request Warranty insurance available on request from the insurer * TÜV / UVV tail lift / tachograph calibration and OBU device installation can be arranged through our local partners * Export plates (30 days) All customs documents for export are possible, but must be requested individually * Toll registration for Toll-Collect can be arranged in-house * Free transfer from Stuttgart airport or Metzingen train station (Württ) * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Over 200 vehicles always in stock

Condition: used, Power: 1 kW (1 HP) Manufacturer: Erweka Model: AR400 Type : Oscillating powder granulator Power : 0,5 KW Nsdewwmmropfx Agzswn Coupling for quick and easy attachment of various devices. Available tools: FGS calibrator (Mesh size: 1.40 (x3); 1.25; 0.80 (x2); 3.15 (x2); 0.1) Materials in contact with product: stainless steel Variable speed

Condition: excellent (used), Year of construction: 1997, total length: 4,400 mm, working width: 1,400 mm, height adjustment type: electric, input frequency: 50 Hz, input voltage: 400 V, Good day, Nedju Hlzfepfx Agzswn We present for sale Heesemann LSM 8 wide-belt grinding machine in a system of four grinding units: transverse unit / longitudinal unit with calibration roller / longitudinal unit with reverser / longitudinal unit + dust collection brush. Machine after mechanical overhaul and inspection, checked and set up, ready to work. Year of construction: 1997 Feed speed: 5-25 m/min - infinitely adjustable from the control panel Working height: 880 mm Workpieces machined: 3-80 mm Energy demand: 107 kW - at full load Total weight: 10250 kg Control: control panel with physical buttons and display Controls: and side of abrasive belt change: right Single conveyor belts, perforated, perforated table with channel and vakuum fan - for safe transport of short workpieces. Part pressure: rubberized rollers fi 70 mm. Abrasive belt Q aggregate: 5400 mm x 150 mm Motor power: 13/17 kW - two-speed motor - belt speed: 12 m/s / 24 m/s Belt "sergeant": 4850 mm x 141 mm Longitudinal belts L aggregate: 2620 mm x 1450 mm Motor power: 16.5 kW / 21 kW - two-speed motors - 10 m/s / 20 m/s Pressing: Pressure beams with computer-controlled selective pressure control - CSD® system with infinitely variable pressure adjustment of individual pressure elements for trouble-free multi-row loading. Reading control roller distance: 16 mm. The abrasive belts have a cleaning system - blow-off and dust extraction. Workpiece tolerance compensation to a maximum of 2 mm by maintenance-free pressure electromagnets. Working width, as well as the beginning and end of the grinding of the pressure bar electronically controlled. Cleaning of the abrasive belts by means of blow-off tubes, dust extraction by means of integrated exhaust channels, activation of the blow-offs automatic, upon detection of workpieces in the machine. At the end, a cleaning/deblasting brush fi 150 mm with an exhaust duct for dust removal. Additional blow-off rotors at the exit of the machine with an exhaust channel. Commissioning at the new site and initial training in operation - to be agreed. Price negotiable on request, machine available immediately.

Condition: used, Year of construction: 2002, Technical details: measuring range X-axis: 505 mm measuring range Y-axis: 705 mm measuring range Z-axis: 405 mm table-size: 638 x 1160 mm max. workpiece weight: 180 kg workpiece height max.: 540 mm Passage height: 630 mm distance between columns: 680 mm table height above floor: 745 mm compressed air: 0,4 MPa Air consumption: 100 l/min. voltage: 100, 120, 220 oder 240 VAC / 50/60 V / Hz total power requirement: 700 Watt dimension machine xH: 1,46 x 1,08 x 2,20 m Nedeu N Atkspfx Agzjwn CNC 3D coordinate measuring machine Measuring system/position control: CMMC-J type, optoelectronic glass scales and speed control via pulse generator Operating modes: CNC operation and/or joystick operation Measuring software: MCOSMOS v. 3.5.R3 PC system: Windows 7, 16 GB RAM New 2022 swivel head installed. Renishaw PH10T+ motor. Rotating/tilting head Renishaw PH10-3 PLUS touch probe; Renishow hand-held control unit and Renishow PH10-T Plus measuring system Renishaw interchangeable system/probe magazine SCR200 for 6 probes Granite measuring table Annual maintenance carried out by Mitutoyo until 2023. Some accessories: such as TP200 probe system, various measuring tips (made of carbon) and holders as well as extensions, calibration ball, 3-jaw chuck, vice *

Condition: excellent (used), Wide Belt Sander SCM Sandya 20 3M 135 Working width: 1350 mm Working height: 3-170 mm Number of sanding units: 3 Steel calibration roller: 18.5 kW Rubber roller: 12 kW Nedpfx Agexhgr Hszjwn Combi unit with segmented pad: 11 kW Cleaning brush at outfeed Vacuum pump Feed speed adjustable via frequency inverter Optical oscillation Sanding belt: 1370x2620 mm

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring Nwsdpfx Asvnv Tqjgzsn - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: used, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, Equipment: type plate available, Mitutoyo Coordinate Measuring Machine Type Crysta Apex C776 First installation: 2007 (Precision Measuring Room) Temperature compensation on all axes Measuring range X-axis = 700 mm Measuring range Y-axis = 700 mm Measuring range Z-axis = 600 mm Measurement uncertainty = 1.9 + 3L/1000 (µm) Renishaw Probe Head PH10MQ Renishaw Probe Rack SCR200 Renishaw Sensor TP200 Renishaw Modules TP200 = 6 pieces Measuring software MCosmos-3 including GEOPAK including CAT1000P Njdpfexnl Nksx Agzown including CAT1000S including SCANPAK including CAD converter PC system and monitor Reference sphere / calibration sphere Free delivery within Germany Including installation by qualified personnel Including calibration by qualified personnel Including on-site training at customer premises After-sales service (optional)

Year of construction: 2020, operating hours: 10,245 h, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model iTNC 640 Main Drive Number of axis 4 Movement Nwsdoxirlzjpfx Agzsn X-Axis Movement 1250 mm Y-Axis Movement 1100 mm Z-Axis Movement 940 mm W-Axis Movement 710 mm Workpiece Workpiece weight 3000 kg This 4-axis TOS Varnsdorf WHQ 10 CNC boring machine was manufactured in 2020. It features a spindle diameter of 100 mm, ISO 50 taper, and spindle speeds up to 2500 rpm. The table can handle weights up to 3000 kg and includes a 40-position tool changer. Currently operational, though "Y" axis calibration is needed. Consider the opportunity to buy this TOS Varnsdorf WHQ 10 CNC boring machine. Contact us for more information about this machine. Application Types Other Machine Tools

Condition: used, Year of construction: 1998, Technical details: x-travel: 870 mm y-travel: 870 mm z-travel: 800 mm table surface area: BxT: 1.260 x 1.050 mm distance between columns: 1.260 mm Laser measuring system with ZETT3D geometry program The table is made of granite and has 48 mounting holes M6 integrated. With interface module Renishaw type P14-2 On machine is currently installed a shaft with probe pin 60mm (without extension) Probeset Renishaw type PH-1 stored in a wooden box. Operation manually, operated control panel with 2 control knobs, keyboard and 4-line LCD display. Accessories: various probe tips and extension, calibration ball Printer Computer (Software Windows NT) Nwsdpfju N At Rjx Agzjn Last calibration was at 06/2006. *

Condition: excellent (used), Wide Belt Sander Biesse Levia 110 Working width: 1100 mm Working height: 3-200 mm Nodpfx Asxhc Ahogzswn Number of units: 2 Steel calibrating roller Combi unit with sectional pad Main motor power: 11 kW Feed speed regulated by frequency inverter Optical oscillation Sanding belt: 2150x1120 mm

Condition: new, Number of sanding units 2 St. sanding width 190 mm Sanding height max. 2-180 mm LÖWER double-sided grinding machine DSM 2000 ----- Double-sided single wood sander for sanding Solid wood such as window wood etc. Stable top quality Guide with long casting tables, brushing and finishing equipment and conveyor belt feed. Suitable for high continuous loads even with higher chip removals. - Staggered sanding and finishing units at the top and bottom - Directly driven rubberized grinding rollers for slip-free power transmission - Combined grinding via roller and shoe for high chip removal at the same time flat intervention zone - Maintenance and wear-free CERMET-coated sanding shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and higher grinding Grinding belt service life - Forced pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the sanding rollers Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom using a precision threaded spindle Dimension display via scale ring (resolution 0.1mm) - Sanding belt tension via pneumatic cylinders with constant clamping pressure - Sanding belt change with pneumatic belt relaxation in seconds - Adjustment of the sanding belt run when changing the belt - electro-pneumatic compressed air monitoring - Run-in protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated non-slip and non-stick conveyor belts over heavy, 1000mm long cast tables with a finely planed surface and Spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and even workpiece transport - Feed gear motor with three different feed speeds for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - automatic workpiece thickness scanning (no previous measurement necessary) - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800mm - Sanding belt width: 200mm - Working width: 190mm - Grinding thickness: 2-180mm - two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 6, 11 and 16 m/min. - automatic height adjustment: 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle: 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height: 850mm - Length: 2105mm - Length with control panel 2490mm - Width: 880mm Nsdpfxsvu Hdte Agzown - Height: 1910mm - Weight: approx. 1500 kg - Operating voltage: 400 volts, 50 Hz, 3P - CE version ----- ----- Basic price of the machine on request! ----- ----- Special accessories with surcharge: continuous feed 4-20 m/min. for speed adjustment to the previous machine Price on request Workpiece blow-off - using nozzles from above and below at the machine ...

Condition: ready for operation (used), Year of construction: 2017, operating hours: 19,843 h, Control Unit Brand HAAS Main Drive Number of spindles 1 Spindle speed range 10000 rpm Spindle motor power 224 kW Tool taper CT40 Nwjdpfxsxirncs Agzjn Number of axis 3 Movement X-Axis Movement 2134 mm X-Axis Rapid Traverse 152 m/min Y-Axis Movement 1016 mm Y-Axis Rapid Traverse 152 m/min Z-Axis Movement 762 mm Z-Axis Rapid Traverse 152 m/min Additional Equipment Ethernet Media Display Synchronized Thread Cutting without Head for Compensation Cooling: ✓ Renishaw Tool Calibration Screw Chip Conveyor TAB-Air Cooling Through Tool HSM-High-Speed Machining Automatic Air Gun Directed at Tool Programmable Coolant Nozzle: Automatically directs spray Coolant Tool This 3-axis HAAS Vf-9/40 vertical machining center was manufactured in 2017. It offers robust capabilities for precision machining. Consider the opportunity to buy this HAAS Vf-9/40 vertical machining center. Contact us for more information. Application Types Milling

Condition: used, Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine Njdpfx Aot Tqy Eogzewn machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive Nwjdov D Rg Dspfx Agzsn transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: used, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Double sided grinding machine Löwer DSM 2004 Double-sided four-band single-wood sanding machine for sanding Solid wood, e.g. Window wood etc. Highly stable top model with innovative details. Suitable for high Continuous load even at higher chip removal rates. - Successively arranged grinding units for rough grinding, fine grinding and finish sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberised roller and shoe 3.Finish aggregate with fiber brush - Direct driven wheels for slip-free power transmission - Maintenance and wear-free CERMET-coated sanding shoes with very good thermal conductivity and absolute dimensional accuracy - Foreign cooling of the grinding zones for a cooler grinding and higher Sanding belt life - positively driven pneumatically controlled grinding belt oscillation - effective sanding dust extraction directly on the sanding rollers - Dust extraction on the tension rollers - integrated brushing and finishing device with large sanding dust extraction Nedpfx Agsvu Hgbszown - Motorized grinding thickness adjustment via precision threaded spindles and large dimensioned linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of chip removal below via precision threaded spindle with dimension display via scale ring (resolution 0,1mm) - Grinding belt tension via pneumatic cylinder with constant clamping pressure - Abrasive belt change with pneumatic belt release in seconds - Adjustment of the grinding belt when changing the belt - Electropneumatic compressed air monitoring - Overflow protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated non-slip and adhesive conveyor belts over heavy, cast tables with finely planed surface and sprung Pinch rollers with fine adjustment - Cardan shaft drive for jerk-free and uniform workpiece transport - Feed gear motor with stepless speed 4-20 m / min - all motors are electrically protected - ergonomically arranged controls - digital strength display (resolution 0.1mm) with modern magnetic tape system Technical specifications: - Sanding belt speed 22 m / s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Abrasive thickness 2-180mm - four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed rate 4-20 m / min. - automatic height adjustment 0.37 kW - two brush sets with fiber brushes D 120 x 200mm à 0.37 kW - Exhaust nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m / s - Pneumatic connection 6 bar - Working height 870mm - Length (with Softdisc 2740mm) 2600mm - Length with control panel (with Softdisc 3035mm) 2985mm - width 880mm - height 1910mm - Weight about 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version Equipped with the following options: - Sanding belt blow 4-band via nozzles directly at the radii of the tensioning rollers within the extraction system arranged, separately switchable - Disc unit for defibering - two grinding disc discs with 200 mm diameter (maximum grinding width 180 mm) - adjustable laterally and in delivery - including frequency converter for stepless speed regulation instead ...