Used Calibrate for sale (1,063)

Condition: like new (used), For sale is a Renishaw XL80 laser interferometer system for machine calibration, suitable for linear and rotary axes, in very good condition. The measuring device is fully functional and has been used very little. It was manufactured in 2022. The device has an accuracy/deviation of 1 nm, and the software is, of course, included in the offer. If you have any further questions, please do not hesitate to contact me. Fgjdpfx Apjzrgvmowjf

Condition: used, machine/vehicle number: 008291, Position 1: Bottom Sanders VIET-S3 - VALERIA Position 2: Top Sanders VIET-S3 - VALERIA Fgedex A Tayopfx Apwjf

Condition: used, machine/vehicle number: 008401, Position 1: Bottom Sanders DMC-UNISAND K-I Position 2: Top Sanders DMC-UNISAND K-I Fjdpfx Asywafnspwjgf

Condition: good (used), Year of construction: 1998, functionality: fully functional, working width: 1,300 mm, 1 bottom calibrating sander equipped with 3 bottom belts 30, 22, 18.5 kW Fgsdpfx Apjw A A Enswsf 1 top calibrating sander equipped with 3 top belts

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, total width: 2,200 mm, total height: 2,400 mm, total length: 2,500 mm, working width: 1,300 mm, overall weight: 7,500 kg, working height: 900 mm, table height: 900 mm, power: 59 kW (80.22 HP), height adjustment type: electric, grinding belt speed: 1,400 mm/s, type of input current: three-phase, conveyor belt speed: 20 mm/s, grinding belt length: 2,640 mm, compressed air connection: 6 bar, table height adjustment: 120 mm, extraction nozzle diameter: 200 mm, power of feed motor: 4,000 W, Bottom calibrating sander for machine in production line, working width: 1300 mm, equipped with: 1 working unit: steel roller, motor: 37 kW; 1 working unit: roller, motor: 22 kW; dust cleaning brush. Fjdowy Nndepfx Apwsgf

Condition: used, GE Druck PACE5000 High-Precision Pressure Controller Manufacturer: GE Druck (Baker Hughes) Model: PACE5000 Device Type: Modular High-Precision Pressure Controller / Pneumatic Pressure Controller Pneumatic Control Module: CM0-B-16G For sale is a used GE Druck PACE5000 High-Precision Pressure Controller. This modular pressure control system was developed for demanding calibration, testing, and automation tasks and is suitable for calibration laboratories, research, development, quality assurance, and industrial test benches. The device impresses with its high control accuracy, fast pressure regulation, and extensive communication interfaces. Technical Data Control Range: -1 to 70 bar(g) Maximum Allowable Working Pressure (MWP): 94 bar Accuracy: up to 0.001% of full scale (model-dependent) Long-Term Stability: up to 0.001% FS Dimensions (W × H × D): approx. 440 × 88 × 320 mm Weight: approx. 10.1 kg Pressure Control Modular pressure control system High pressure control speed Automatic pressure regulation Leak test function Burst test Switch test Fgedpfeziyqrjx Apwef Programmable test sequences User-defined pressure units Display Color touch display Graphical user interface Display of setpoint and actual value Intuitive menu navigation Interfaces Ethernet USB Host USB Device RS-232 CAN IEEE-488 (GPIB) 24 V DC inputs/outputs Pneumatic connections Supply Output Vent Reference G1/8" connection Power Supply 100–230 VAC 50–60 Hz Power consumption: max. 100 VA Equipment Pneumatic Control Module CM0-B-16G Color touch display Ethernet interface USB Host / USB Device RS-232 CAN IEEE-488 (GPIB) 24 V DC inputs/outputs Pressure connections Power cable Accessories as shown in the pictures Application Areas Calibration laboratory Test benches Quality assurance Automotive industry Aerospace Mechanical engineering Metrology Research and development Automation technology Pressure sensor calibration Shipping Data Dimensions: approx. 440 × 88 × 320 mm Weight: approx. 10.1 kg Condition Used The device was last used in an industrial setting. Optical condition as shown in the pictures. Normal wear and tear due to age. Scope of Supply GE Druck PACE5000 Power cable Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), Year of construction: 2001, * 5 grinding units: - 1 bottom 18.5 kW - 2 lower 15 kW - 3 upper 18,5 kW - 4 upper 15 kW - 5 upper 11 kW * stepless feed regulation on inverter (2x2.2kW) * electric adjustment of table height * pneumatic oscillation * grinding belt blowing Fsdpfxst Hmg Ie Apwegf

Condition: used, Balance, calibration weight, test weight, calibration weight, taring weight -Calibration weight: test weight calibration weight for scales Fodpfol Ab Egjx Apwsgf -Test weight: 1 kg -Dimensions cover: Ø 60 x 94 mm -Weight: 1.0 kg

Condition: ready for operation (used), Year of construction: 1993, Automatic sander VIET Mod. Rita 4C EL Fixed plane moving heads Working width 1350 mm Working height 4 – 160mm Nr 03 suction hood depressors diameter 150 mm Belt feed speed 6 – 20 with 3 kw inverter Hood carpet cleaning brush diameter 120 mm Composition: 1st transversal polishing unit mod. TET 60 electronic pad 60 sectors Lamellar tape 6150 x 140 mm Our abrasive 8350 x 170 mm Velocity 5.6 – 26.2m/s Inverter kw 15 Three 140 mm diameter extraction hoods 2nd roller sanding unit mod. R320 – 40 rubber coating 40° SH Sanding belt 3250 x 1400 mm Speed 1.5 – 12.5m/s Inverter kw 15 Belt cleaning blower Two extraction hoods with a diameter of 140 mm and one with a diameter of 200 mm 3rd buffer polishing group mod. TE 60 electronic pad 60 sectors Sanding belt 3250 x 1400 mm Velocity 2.9 – 14.1m/s Inverter kw 15 Belt cleaning blower Two extraction hoods with a diameter of 140 mm and one with a diameter of 200 mm 4th cross sanding unit mod. TET 60 electronic pad 60 sectors Lamellar tape 6150 x 140 mm Our abrasive 8350 x 170 mm Velocity 5.6 – 26.2m/s Inverter kw 15 Three 140 mm diameter extraction hoods 5th scotch-brite group Engine kW 0.55 Suction hood diameter 140 mm Fjdpoltlx Tefx Apwjgf 6th brush unit Engine kW 0.55 Suction hood diameter 140 mm 7th panel cleaning rotary blower group

Condition: refurbished (used), functionality: fully functional, !!!We have two units in stock, price is for one unit only!!! Thermo Scientific 3951 Reach-In CO2 Incubator - Calibrated! Specification Details Capacity 821 L (29 cu ft) Temp. Range Ambient + 5 °C to 50 °C CO₂ Range 0–20% (TC sensor) Humidity < 80% (medium) or < 90% (high) with 15 L reservoir Uniformity ± 0.3 °C at 37 °C (control ±0.1 °C) Interior Dimensions 68.5 × 78.7 × 152.4 cm Exterior Dimensions 83.8 × 96.5 × 203.2 cm Weight ~227 kg (500 lb) Fgsdexaqncepfx Apwof Electrical 200/230 V, 50/60 Hz, 10 A Certification CE, UL, cUL Good working condition. Please check out our other listings as well.

Year of construction: 2011, condition: refurbished (used), functionality: fully functional, !!! Calibrated, comes with decontamination mode !!! Fedpfx Aoxbdt Ijpwegf Overall Dimensions - inches (mm): Model NU-5510/E Height: Exterior: 39.5 Inches (1003.3mm) Width: 25.5 Inches (647.7mm) Depth: 26.5 Inches (673.1mm) Height: Interior: 25.5 Inches (647.7mm) Width: 21.5 Inches (546.1mm) Depth: 21.0 Inches (533.4mm) Shelf Capacity: Size: 19.25 Inches (489mm) x 19.25 Inches (489mm) Performance Parameters - Temperature Range: 18°C to 55°C (5°C above ambient to 3°C ambient max.) - Temperature Uniformity: +0.3°C at 37°C. - Temperature Accuracy: +0.1°C. - Minimum Temperature for 145 DEG Cycle 135°C Decontamination: 95 DEG Cycle 87°C - CO2 Range: 0.1 to 20%. , CO2 Accuracy: +0.1% , CO2 Recovery: Up to 5% +0.2% in 4 minutes. - Temperature Recovery: 0.3°C/min. (Average) - Temperature Display Resolution: 0.1°C , CO2 Display Resolution: 0.1% - Door and Perimeter Heater Control Logic: Proportional 0-100% (adjustable) , Door & Perimeter Heater Duty cycles are processor controlled. , Temperature Sensor Type: Precision Integrated Circuit - CO2 Control Logic: Fixed Algorithm/Manual Environmental Adaptable. , CO2 Sensor Type: Infrared , Connectors on rear panel are provided for chart recorder, remote alarm, and printer connection.

Condition: used, The machine is ready for operation and was used for sorting carrots by length. Two identical machines are available, with the listed price applying to one unit. Belt conveyors are not included in the sale. Fedpfxey Hfpqj Apwjgf Please have a look at my other listings.

Condition: excellent (used), Year of construction: 1995, 2 grinding aggregates with 22kW motors each Cleaning brush Smooth feed regulation Vacuum suction of the workpiece Fedpfx Apehxvi Eowegf Powered receiving roller table

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 1183, VACUUM CALIBRATION TANK G&G VA 75-6 Chamber: 1 Fodpfx Aperqz Auowegf Pipe Diameter: Max 75 mm Length: 6 meters Feed: electrically back and forth Year of construction: 1992

Condition: used, Year of construction: 2003, functionality: fully functional, Ledinek High speed double side calibrate planer 150 m/min Rotoles 300 2V-KS 150 Fsdjzc H T Ujpfx Apwsgf 214 KW

Condition: excellent (used), functionality: fully functional, CALIBRATING SANDING machine with 3 belts model DMC TECHNOSAND TC 1350 RRP second hand machine CE standard : YES machine with vacuum unit for table universal machine for wood, furniture, custom-made furniture, wooden frames, doors, panels, composite materials, plastics and various technical data: max. working width mm.1350 max. working height mm.150 min. working height mm.3 dimensions of abrasive belts mm.1380 x 2620 automatic centering composition machine ( 3 units , 3 independent motors ) : 1st unit : rubber roller diameter mm.240 - shore 85 . motor power Kw 18,5 automatic blowers for cleaning abrasive belts 2nd unit : rubber roller diameter mm.240 - shore 45 . motor 2 speeds power Kw 12 / 15 automatic blowers for cleaning abrasive belts 3rd unit : electronic segmented pad n.34 sectors . motor 2 speeds power Kw 8,8 / 11 automatic blowers for cleaning abrasive belts Fsdpfjyrrr Uex Apwsgf brake with automatic intervention input roller conveyor output roller conveyor weight kg 3850 volt. 380/50

Condition: like new (used), Garant reference standard for multi-sensor measuring machines. Fjdpfxszkipae Apwogf

Condition: excellent (used), The device is in good working order and ready for use. It comes with a set of sieves with the following sizes: 6 mm, 9 mm, 15 mm, 25 mm, 35 mm. Year of manufacture: 2015. Working width: 140 mm. Electrical power: 5.5 kW. The device has three sorting levels; the fruits that were sorted include: strawberries, cherries, and currants. Fodpfxezhfuao Apwsgf Please check out my other listings.

Condition: used, Year of construction: 2005, Large ZEISS PRO T SELECT Coordinate Measuring Machine (CMM) available for immediate sale. The machine was previously installed in a professional metrology laboratory and has been professionally decommissioned. It is stored indoors and is ready for shipment. Technical specifications: * Manufacturer: ZEISS * Model: PRO T SELECT * Year of manufacture: 2005 Fedezga D Hspfx Apwegf * Serial number: 131860 * Steel measuring table: 4000 × 3000 mm * Probe system: Renishaw RDS-CAA indexing probe head * Calibration according to DIN EN ISO 10360 * Latest ZEISS calibration performed in 2025 (documentation available) * Complete machine * Indoor storage * Ready for immediate loading and worldwide shipment Included: * Complete ZEISS PRO T measuring machine * Renishaw RDS-CAA probe head * ZEISS calibration documentation (2025) * Available technical documentation (upon request) Additional information: The machine is available for inspection by appointment.

Condition: excellent (used), Sound level meter in a wooden case Manufacturer: Brüel & Kjaer Type: 4220 Fgedpfx Apef Etutewjf Weight: 1.2 kg

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 990616/RC2, working width: 1,350 mm, Equipment: CE marking, documentation/manual, SECOND-HAND TOP AND BOTTOM CALIBRATING AND SANDING LINE COSTA Line set up: - Bottom 3-group calibrating and sanding machine Costa mod. KB / CCT1350 Matr. 990616 / RC2 * Roller diam. 400 mm - 22 kw * Roller diam. 400 mm - 15 kw * Sectioned cnc sanding pad - 11 kw - Top 3 groups calibrating and sanding machine Costa 3 groups Costa mod. K2 / TRCCT1350 Matr. 990616 / RC3 * Roller diam. 400 mm - 22 kw * Roller diam. 400 mm - 15 kw * Sectioned cnc sanding pad - 11 kw - Device for short pieces - Vacuum device - Working width 1350 mm Fsdpezcmm Isfx Apwjgf - Connection conveyor - CE rules (year 1999) - With CE declaration and manuals

Condition: used, turning diameter over bed 2000 mm turning diameter over slide rest 1050 mm turning length 7000 mm speed 1,6 - 250 U/min voltage 380 V Fsdpfx Apeyuqflewsgf

Year of construction: 2003, condition: used, Manufacturer: Zanchetta Model: Piraña Year: 2003   Type : Calibrator for granulated or wet products Applications: pharmaceutical, food, chemical, cosmetics …   Installed electrical power: 3 kW Power supply : 380V – 3 phases – 50 Hz Motor speed : 1440 rpm Dry air consumption: 15 L/min at 2.5 bars Fgodox R Dk Ijpfx Apwef Available basket diameters: min Ø 800µ – max 4500µ Treated product moisture content: max. 10 %. 10 % Noise level: < 85 dBA Dimensions: 700 x 1500 x 1400 mm Height to drum axis: 900 mm Product infeed diameter : 150 mm Product outlet diameter : 150 mm Control panel with speed variation Paper documentation available

Condition: excellent (used), functionality: fully functional, working width: 950 mm, Calibrating/sanding machine "SCM" model SANDYA 3S CODE: CAL-055 USED MACHINE - V380/50 - "CE" Fgsdpfxey Tlxrj Apwof ▸Working width: 950 mm ▸1st unit: steel roller ▸2nd combined unit: rubber roller / timed, sectional pneumatic pad ▸Additional rigid pad ▸Pneumatic exclusion of the rollers from the frame ▸2 conveyor belt speeds ▸Automatic table positioning ▸Roller conveyor with 2 idler rollers at the inlet/outlet ▸Motor power: 7.5 kW

Condition: used, This listing is for the Troemner 4KG Cylindrical Calibration The unit is in full working condition and is ready for immediate use The Troemner 4 kg Certified Calibration Weight in a cylindrical design, compliant with ASTM standards, is a precision mass standard used for calibrating high-precision balances. These weights are essential for ensuring the accuracy and traceability of weighing instruments in laboratory and industrial settings. Fjdsxv Dpfepfx Apwogf Key Specifications Material: High-grade stainless steel, such as Troemner Alloy 8, known for its uniform density, low magnetic properties, and resistance to corrosion. Design: Cylindrical shape with a protective polycarbonate case. Density: Approximately 7.95 g/cm³ at 20°C. Tolerance: Varies by ASTM class; for instance, ASTM Class 3 weights typically have tighter tolerances suitable for calibrating balances with readability as low as 0.01 g to 0.001 g. Certification: Available with ISO/IEC 17025 accredited certificates or traceable certificates, ensuring compliance with international calibration standards. .