Used Calibration Ball for sale (4,110)

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings Kedpfx Acjzvgdls Eodr The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, HARDINGE Conical Ball Mill 6’-0” dia x 36” ball mill for the dry grinding of industrial minerals. Kjdpfozvgvnex Ac Eedr Mill fitted with Manganese steel liners for operation will steel ball grinding media. White Metal Bearings on trunnions. 90 kW Motor fitted (could be reduced to 75 kW). Mill with countershaft drive but could be converted to gearbox.

Year of construction: 2026, condition: new, ceramic ball mill ,Batch ball mill ,also called ceramic ball mill ,it is used for fine grinding of feldspar,quartz,clay,ore and so on.The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving power.It can be dry or wet.The machine can use different liner types according to production needs to meet different needs.The fineness of the grinding operation is controlled by the grinding time ceramic ball mill Working principle Kodsvzx Auspfx Ac Esdr when ball mill working,steel balls inside drum will rotate with the drum to some height,and then steel balls fall down with materials to reach the point of grinding. Working Principle of Ceramic ball mill ceramic ball mill ,Intermittent ball mill grinding operation is finished in the cylinder body. When the cylinder rotates, materials ascend to a certain height and then fall along a certain path due to the balls' gravity. Two forces are generated on the balls inside. One is the force on balls through tangent direction; the other is a opposite force in the contrast to the diameter of balls, as a result of the force generated when the balls slide down. These two forces will constitute a couple for the steel balls. The balls are squeezed between the cylinder and the adjacent steel balls, so the couple can make unequal-sized friction force. The balls will orbit along with the cylinder axis and then fall down, which can produce a strong impact force on the ores in the cylinder body and, as a result, the ores will be crushed. In conclusion, the ores in the cylinder body are mainly crushed by composite effect of peeling force, impact force and extrusion force. Ceramic ball mill also named Intermittent ball mill which adopts the wet intermittent operation, is used for fine grinding and mixing the material such as feldspar, quartz, clay ceramic raw materials. The discharging and the mud size can through through 1000 sieve pore. This machine is high milling machinery, materials should be Broken in the fineness of the state into the grinding mill to get the highest efficiency and economic benefits. The cement mill is key equipment for the grinding process of the cement clinker after the crushing process of it. It is mainly used in the cement silicate product industry. After long term design and manufacture of the cement mill, our company now has series of cement mill with various specifications to meet with different requirement from our customers. Features of Cement Mill Our company adopts suitable transmission methods according to different specifications. We have brim drive and center drive as transmission form. The cylinder adopts new type step lining to increase the grinding area. And it is easily repairable and changeable. The new designed separate-chambered structure adopts flexible lifting blade and fixed lifting blade and it is easily fixed and repaired. Technical Details We have different models and options for different requirements, please contact us for more info.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: WRE-200920166278FL, CNC Milling Plotter CNC-1325 5.5 kW Working area: 1300x2500, Z-300 mm - DSP NK 105G2 controller with proprietary processor, allowing parameter changes during machine operation - Modern software for easy creation of 2D, 2.5D, and 3D files from images - Brushless spindle, industrial-grade bearings, water-cooled, 5.5 kW (24,000 rpm) - Digital drives with rack and pinion transmission (X, Y axes) Kedey Au Easpfx Ac Esdr - Helical rack gears - Z axis driven by TBI 25mm ball screw - Chip extraction brush - Welded steel frame - Automatic tool length calibration sensor - WIWIN-25mm linear rail guides - Vacuum table with 4 suction zones - BUSCH-250 vacuum pump - Oil mist tool cooling system - Automatic tool changer, 5.5 kW ATC spindle - Chiller unit for ATC spindle cooling The machine is in excellent condition, used only occasionally. Sold complete with vacuum pump. For further information please call: Piotr Żołnierczyk, tel. 606 666 023.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 4012M-4212, measuring range X-axis: 900 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 1,200 kg, Equipment: type plate available, Technical Data: Machine type: Mitutoyo STRATO 9106 FAL-A910 Year of manufacture: 2001 Measuring range: 900 x 1000 x 600 mm Software: Mitutoyo Software v2.4.R11 Accessories: Kodoqz T H Aspfx Ac Eedr Probe head mount: Renishaw SP80 Probe head: Renishaw SP80 Additional accessories: calibration ball (ceramic), various probe styli and extensions, Renishaw change rack, fastening kit with 4 x SCP80 and probe holder Modifications and errors in the technical data and information as well as prior sale are subject to change!

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Kodpfx Acexmfc Uo Ejdr Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7312 - 3089 - FA, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,200 mm, total height: 350 mm, type of input current: AC, total width: 550 mm, total length: 850 mm, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, overall weight: 10 kg, input voltage: 220 V, Equipment: documentation/manual, type plate available, HEXAGON ROMER Absolute Arm 7312 + PolyWorks 2025 Inspector Probing™ + HP ZBook For sale is a very well-maintained and lightly used HEXAGON ROMER Absolute Arm 7312 portable measuring arm, manufactured in 2015. The system was used exclusively in a metrology laboratory and is in excellent technical condition. Included in the sale is a fully configured HP ZBook industrial workstation laptop with current PolyWorks Metrology Suite 2025 / Inspector Probing™ software including transferable dongle license. The measuring arm is ready for immediate operation. Last calibration was performed on 12.01.2022. Technical specifications: * Model: RA7312 * Measuring range: 1.2 m * Arm weight: 10.2 kg * ISO 10360-2 * MPEp: 8 µm * MPEE: 5 + L/40 ≤ 18 µm Technical equipment / scope of delivery: * HEXAGON ROMER Absolute Arm 7312 * Absolute Encoder technology * Integrated digital camera and work light * Haptic feedback * Ergonomic handle * Zero-G counterbalance * Mounting plate * TESA TKJ * Probes with 3 mm / 6 mm ruby ball and 15 mm steel ball * Certified reference bar for 1.2 m measuring range * Total length 305 mm * Including certification * Calibration sphere * Magnetic mount * Transport case * Dust cover * B89 certificate Software / system environment: * PolyWorks Metrology Suite 2025 IR10.2 * Inspector Probing™ * Installed and fully operational software environment * Dongle-based license * Transferable license * Pre-configured measurement system * Ready for immediate use * ROMER arm fully integrated and operational Notebook / hardware: * HP ZBook Workstation * Intel Core i7 processor * 16 GB RAM * NVIDIA graphics card * SSD storage * USB 3.0 * WiFi / Bluetooth Transport / dimensions: * Portable measuring system * Total weight including transport case approx. 20 kg * External dimensions of transport case approx. 850 x 550 x 350 mm * Heavy-duty original transport case included Special features: * Used exclusively in metrology laboratory * Lightly used * Complete package * Ready for immediate use * Current software environment * Portable coordinate measuring technology * Precision measuring arm according to ISO 10360-2 * Ideal for quality assurance, reverse engineering, tool and mold making Inspection and functional test possible by appointment. Sale preferably to commercial buyers. Kjdpfx Acjy Ta A Es Eedr Subject to prior sale and errors excepted.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 966 h, MAZAK OPTIPLEX NEXUS 3015 FIBER - 4 kW CNC Fiber Laser Cutting Machine Price: EUR 190,000 net Condition: Used – VERY LOW OPERATING HOURS Resonator: IPG YLS-4000 U VERY LOW WORKING HOURS The machine has exceptionally low operating hours. The IPG resonator and critical components are in near-factory condition: Kjdpfx Acjy Dgxus Ejdr - Practically full remaining lifespan of the IPG resonator (rated for up to 100,000 h) - Minimal wear on the optical system, Multi-Control Torch 2.1 head, and linear guideways - Cutting quality and precision comparable to a new machine - Operating hours confirmed by CNC readout – documentation available upon request or during inspection TECHNICAL SPECIFICATIONS Model: Optiplex Nexus 3015 Fiber Laser Type: Ytterbium fiber laser Resonator: IPG YLS-4000 U Laser Power: 4.0 kW Max. Sheet Size: 1,525 x 3,050 mm Max. Pallet Load: 930 kg Travel (X/Y/Z): 3,100 / 1,580 / 150 mm Rapid Traverse (X/Y): 60 m/min (85 m/min combined) Drive X1/X2/Y: Rack & pinion, direct-drive Drive Z: Servo, ball screw Accuracy X/Y: ±0.05 mm / 500 mm Repeatability: ±0.03 mm Head: Multi-Control Torch 2.1, F125-F200 mm Assist Gases: O2, air, third gas; 0.02–2.5 MPa CNC: Mazatrol Preview G, 19" touchscreen Pallet Changer: Automated, 2-pallet Weight: Approx. 12,850 kg Power: 380–480 V, max. 18 kW CUTTING CAPACITY (4 kW) Mild steel O2: 20 mm Mild steel N2: 4 mm Stainless steel N2: 15 mm Aluminum N2: 15 mm Copper O2: 8 mm Brass N2: 8 mm INTELLIGENT FUNCTIONS (INCLUDED) Automatic nozzle changer (8 nozzles), auto focus positioning, focus detection, auto profiler calibration, auto nozzle cleaning, beam diameter control, pierce/plasma/burn detection, fine power ramping, flash cut. SCOPE OF DELIVERY (INCLUDED IN PRICE) Cast-iron frame (foundation-free installation), Mazatrol Preview G CNC 19", Multi-Control Torch 2.1 head with 8-position nozzle changer, OPTIPOD module, automatic 2-pallet changer, chiller with 6 m hoses, cutting nozzles 1.2/2.0/3.0 mm plus 5 adapters, laser edge detection, numerical gas pressure control, multi-tap transformer, slatted table (100 mm spacing), tools, documentation (PL/EN). OPTIONAL EQUIPMENT – NOT INCLUDED The laser system can be purchased separately for EUR 190,000. Options below are available at additional cost. OPTION A – PRESSURE-BOOSTING UNIT – EUR 15,000 net Allows cutting with compressed atmospheric air instead of expensive nitrogen, greatly reducing operating costs. Components: 1. Compressor SK 25 / max. 15 bar / SK.2-13318 2. Condensate Drain Ultramat UFM-D03 3. Economizer Ultra-Filter DF 0035 - DF 1100 4. Ultra-Filter DF 0035 - DF 1100 5. Pressure vessel, 500 l Air cutting capacity: mild steel up to 6 mm, stainless up to 4 mm. OPTION B – SHEET LOADING CRANE – EUR 5,500 net Sheet loading crane, lifting capacity up to 700 kg. Enables safe and quick loading of sheets onto the laser pallet. PRICE SUMMARY (NET, EUR) Machine only: EUR 190,000 Option A (pressure unit): EUR 15,000 Option B (loading crane): EUR 5,500 Total with both options: EUR 210,500 COMMERCIAL TERMS - All prices are net, in EUR (VAT not included) - Offer valid for 30 days - Payment and delivery terms to be agreed - Inspection and test cutting available by appointment

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 400 mm, number of axes: 3, This 3-axis Mitutoyo Crysta-Plus M574 was manufactured in 2010. It features a measuring range of 500 × 700 × 400 mm and includes a Renishaw MH20i probe head with a TP20 standard force probe system. The machine is equipped with a granite measuring table and multiple styli for enhanced versatility. If you are looking to get high-quality coordinate measuring capabilities, consider the Mitutoyo Crysta-Plus M574 CMM machine we have for sale. Contact us for further details. Technical Data • Measuring Range (X × Y × Z): 500 × 700 × 400 mm • Probe Head: Renishaw MH20i • Probe System: TP20 Standard Force • Probe Module: Standard Force • Scale Resolution: 0.0001 mm (0.1 µm) • Probe Ball Diameter: Ø 4 mm • Stylus Length: 20 mm • Operating Temperature: +5 °C to +40 °C • Length Measuring Error (E0, MPE): (5 + 6L/1000) µm • Single Stylus Form Error (PForm, MPE): 6 µm • Test Sphere Diameter: Ø 3.994 mm • Automatic Temperature Compensation: No • Calibration Date: 10 March 2026 Additional Equipment • Renishaw MH20i indexing probe head • TP20 probe system Ksdpfxezt Nq Nj Ac Eedr • Stylus rack • Multiple styli • Granite measuring table • Machine stand

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: OPTIPLEX FIBER II 4020, Manufacturer: Mazak Model: OPTIPLEX FIBER II 4020 Year: 2016 Type: 2D fiber laser for sheet metal cutting Design: Flying Optics Control: Mazatrol Preview G / Preview 3 CNC Laser source: Fiber IPG YLS/YDS Working area and dimensions of workpiece Maximum sheet size: 4000 × 2000 mm 157.5" × 78.7" Maximum sheet weight: 1600–1920 kg Axis ranges X-axis: approx. 4075 mm (160.4") Y-axis: approx. 2060 mm (81.1") Z-axis: approx. 110 mm (4.33") Number of controlled axes: 3 Speeds and accuracy Rapid traverse X/Y: up to 120 m/min approx. 4724 ipm Positioning accuracy: ±0.05 mm / 500 mm Axis drive: X/Y: rack and pinion Z: ball screw Resonator power: Kodpezg U Akofx Ac Ejdr 6 kW Maximum cutting thicknesses For the 6 kW version: Material Max. thickness carbon steel up to 25–26 mm stainless steel up to 25 mm aluminum up to 25 mm copper up to 12 mm brass up to 12 mm Standard / optional equipment Typical equipment: automatic pallet changer (2 tables) Multi-Control Torch automatic nozzle change automatic focus adjustment piercing monitoring automatic head calibration collision sensors dust extraction intelligent cutting process monitoring

Condition: ready for operation (used), Year of construction: 2023, operating hours: 4,159 h, travel distance X-axis: 500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 800 mm, number of axes: 3, This 3-axis HAGE 3D Precision One was manufactured in 2023. It features a generous build volume of 500 × 700 × 800 mm and a maximum printing temperature of up to 450 °C. The printer is equipped with a heated build chamber and print bed, ensuring optimal conditions for high-temperature plastics. If you are looking to get high-quality 3D printing capabilities, consider the HAGE 3D Precision One industrial FDM/FFF 3D printer we have for sale. Contact us for further details. • Heated Build Chamber: Up to 150 °C • Heated Print Bed: Up to 180 °C • Maximum Printing Temperature: Up to 450 °C • Layer Thickness: From 0.05 mm • Traverse Speed (XY): Approx. 350 mm/s • Servo Motors with Ball Screw Drives in X, Y and Z Axes • Automatic Print Bed Calibration via Multi-Point Topography Measurement • Vacuum Print Bed • Water-Cooled Triple DSD Print Head • Adjustable Feed and Contact Pressure • Short Filament Feed Path • Free Lift of the Inactive Extruder/Nozzle • E1: Standard Hotend • E2: Backup Hotend (Filament Run-Out Detection) • E3: High-Flow Hotend (Extra-High Material Deposition Rate) • Heated Build Chamber Suitable for High-Temperature Plastics • 360° Component Temperature Management Kdsdezk E Ekepfx Ac Eor • Targeted Part Cooling up to 4.8 m³/h • Activated Carbon and HEPA Filtration System • Highly Effective Filtration of Macro-, Micro- and Nanoparticles (VOCs and Volatile Solvents) Drying Chamber (DCU), 2024 (optional, not included) • Internal Dimensions (X/Y/Z): 630 × 390 × 260 mm • Capacity: 3 Movable Small Spools (Upper Section) • Capacity: 2 Movable Large Spools (Lower Section) • Maximum Drying Temperature: 100 °C • Filament Feed: Direct Feeding from the Chamber with up to 4 Spools • Automatic Air Exchange and Moisture Removal • Tempering Chamber Internal Dimensions (X/Y/Z): 418 × 601 × 401 mm • Loading Areas: 3 Loading Positions for 600 × 400 mm Sheets or Grids • Maximum Tempering Temperature: 200 °C • Simultaneous Operation of Drying and Tempering Chambers • External Dimensions (X/Y/Z): 1,600 × 695 × 580 mm • Total Weight: Approx. 100 kg • Control: Siemens LOGO! • Maximum Power Consumption: 6 kW • Electrical Connection: Three-Phase AC 230 V, 16 A Fuse per Phase

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 62286233, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, total width: 1,303 mm, total length: 776 mm, total height: 1,004 mm, overall weight: 324 kg, workpiece weight (max.): 20 kg, Equipment: documentation/manual, 📏 As New Mitutoyo QV Active 404 CNC Vision Measuring System for Sale – High-Precision, Non-Contact Metrology Upgrade your inspection capabilities with the Mitutoyo QV Active 404, a cutting-edge CNC vision measuring system designed for fast, accurate, and repeatable 2D and 3D non-contact measurements. This used unit offers premium Mitutoyo performance at a cost-effective price—ideal for precision manufacturing, quality control labs, and R&D environments. Condition: Never Used – Still in original crates 🔧 Product Overview – Mitutoyo QV Active 404 The Mitutoyo Quick Vision Active 404 is part of Mitutoyo’s renowned Quick Vision series, combining fast automatic measurement, superior accuracy, and flexible lighting systems. It’s equipped with CNC stage movement, a high-resolution camera, and QVPAK software, providing automated, high-accuracy vision-based inspection in one compact footprint. This machine is still in its original crates and is in as new condition, making it a perfect solution for any business requiring advanced metrology tools without the cost of new equipment. ✅ Key Features of the Mitutoyo QV Active 404 📐 Automatic 3-Axis Measurement (X/Y/Z) with CNC stage 🔍 Non-Contact Vision Measurement – Ideal for fragile or micro-scale parts 🧠 QVPAK Software – Industry-leading metrology software for automated routines, reporting, and part programming 💡 Advanced Illumination System – Includes ring light, coaxial light, and programmable sub-stage lighting 🔧 Motorized Zoom Lens for flexible magnification and measurement precision 🖥️ Real-Time Edge Detection for ultra-precise dimensional analysis 📐 Technical Specifications Measurement Range: X400mm / Y400mm / Z200mm Vision Head Range: 400x400x200mm Size of Stage Glass: 466x480mm Max Stage Loading: 20kg Resolution: 0.1 µm Accuracy (E1): ±(2.5 + 4L/1000) µm Touch Probe Accuracy: (2.4+3L/1000) µm Stage Type: Motorized CNC, granite base Camera: High-resolution digital CCD Lighting System: Multi-source - ring, coaxial, contour Magnification Change System: Zoom optical system with 8 positions Lens System: Motorized zoom Sensor Type: High resolution CMOS colour camera Software: Mitutoyo QVPAK Machine Dimensions: 776x1303x1004mm Weight including Stand: 324kg 🧰 Perfect For Precision component manufacturers Aerospace, automotive, medical device inspection Electronics & PCB measurement R&D and dimensional analysis labs Tool & die makers and high-accuracy workshops 📦 What’s Included Used Mitutoyo QV Active 404 CNC Vision Measuring System Machine Stand Work Station Master Ball Stand MCR Attaching Plate Calibration Ring QVPAK Software Dell Computer Wide Screen Monitor Ksdpfxowqrvls Ac Esdr Printer Used Mitutoyo QV Active 404 for sale Mitutoyo vision measuring system CNC non-contact measuring machine QVPAK software system Pre-owned Mitutoyo CMM Vision metrology machine UK / EU Mitutoyo Quick Vision Active measuring device Notes: *Specifications are given in good faith but not guaranteed*

Year of construction: 2023, condition: used, VIOLI Drawing Bench VM/TRI25-3s Manufactured in 2023 The VIOLI Drawing Bench VM/TRI25-3s is a robust and innovative machine designed for precise and efficient metal drawing, featuring a 3-meter useful length and a powerful 2,500 kg pulling capacity. Its patented hydraulic system ensures linear pulling, compact design, and consistent quality. TECHNICAL SPECIFICATIONS Useful Length: 3 Meters Pulling Power: 2,500 kg Drawing force: Max. daN 2500 Operating hydraulic pressure: 180 bar Drawing speed: Min. 0 m/min. - Max. 17 m/min. Drawing reduction: Around 15% of the section Clamping force POINTER: 100 Ton Tolerance: 1 mm Power supply: 400 V - 50 Hz Electric power: 9,2 KW Hydraulic oil: ISO 46 Motor Power: 9.2 kW - 380 V, 50 Hz Noise: At the workplace LP < 70 dB(A) Hydraulic System: Proportional hydraulic pump Kedpfx Aeyl U Sqjc Eedr Carriage Sliding: with ball circulation guides Construction and movable installation of a hale holder to house 1 O hales in line with the trolley; Predisposition for cooling the lubricating oil with the insertion of a stainless steel pipe coil in the tank; Adjustable Die holder; Bar support system; Tank with pump for lubrication; Opening/ closure of pliers operated manually by pneumatic pistan; Compliance: Machine comply with the UE conformity regulations. DETAILED FEATURES Operating System: The system uses a hydraulic piston and patented technology for optimizing space, ensuring linearity with the drawing hole, and minimizing bending of the supporting structure. It allows for a compact die length and double the useful pulling stroke. Caliper Return: A patented double-circuit chain technology returns the caliper to its starting point. This allows the hydraulic piston's length to be half of the useful working stroke. Pulling Power: The pulling power is in line with the drawing die. Speed Control: Manual adjustable speed from 0 to 16 meters per minute (0−16 Mt/m). It offers fine regulation of the speed and constant speed derived from the hydraulics. Tolerance: The tolerance is 1 mm. Hydraulic System: Features a proportional hydraulic pump. Motor Power: 9.2 kW - 380 V, 50 Hz. Carriage: Carriage sliding with ball circulation guides. Hole Holder: Construction and movable installation of a hole holder to house 10 holes in line with the trolley. Lubrication: Includes a lubrication tank with a lubrication pump. There is also a predisposition for cooling the lubricating oil with a stainless steel pipe coil in the tank. Die Holder: Adjustable. Bar Support: Includes a bar support system. Pliers Operation: Opening and closure of pliers are operated manually by a pneumatic piston. Control Panel: The machine is equipped with a control panel FUNCTION The hydraulic drawing bench VM/TRI253S is a machine used for the cold reduction of the cross section of a metallic rod, both with round or shaped profile, or of an empty or “animated” metallic tube. The reduction of the section is obtained by passing the product through a calibrated drawing die and pulling it, using a mechanical clamp with the force required to obtain the reduction of the section. COMPOSITION OF THE DRAWING BENCH The machine is composed of the following main components: - Metal structure - Carriage equipped with a hydraulically controlled clamp - Carriage drive unit - Hydraulic system - Electrical system Metal structure The metal structure is composed of a recirculating ball guide. At the end of the rails, a suitable sized plate supports t...

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 9,000 l, Equipment: documentation/manual, BRINOX 9000 L GMP Wash and Elution Solution Tank Horizontal Stainless Steel Pressure Vessel – Year of Manufacture 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Serial Number: 1003558 Year of Manufacture: 2020 Nominal Volume: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application The tank was used in a pharmaceutical manufacturing facility. Suitable for preparation, storage, and dispensing of process solutions in GMP environments. Construction and Equipment - Cylindrical stainless steel tank in horizontal configuration - Front-end process connections - Large manway with pressure lock - Integrated CIP (Cleaning-In-Place) system with spray ball - Highly polished internal surfaces - Hygienic product-contact connections - Multiple instrumentation and sensor nozzles - Documented weld seams with full traceability - Separate stainless steel support legs included Condition Visually and technically in very good condition. Internal surfaces are mirror-polished and clean. No visible damage to the shell or connections. Accessories and attachments present as per photo documentation. FAT and Documentation Status According to FAT documentation “IT-11.1 Inspection of Welding Documentation”, weld documentation was inspected during the Factory Acceptance Test (FAT 01, 23.10.2020). The following were confirmed, among others: - Identification of welders and weld inspectors - Welder qualifications according to EN ISO 9606-1 - WPS and WPQR documentation - Proof of shielding gas suitability - Documented test welds - Visual spot checks with no findings - Traceability according to material certificates 3.1 The complete weld documentation is part of the Turn-Over-Package. Documentation – Fully Available - FAT plan and FAT report - Layout and construction drawings - P&ID diagrams - Calibration protocols - Surface finish and roughness tests - Leak test Ksdpeykkk Hjfx Ac Esdr - Welding plan - WPQR - WPS - Welder qualifications - Borescope inspection report - Incoming goods inspection reports - Sensor calibrations The complete technical documentation is available digitally. Special Features - Fully documented GMP configuration with certified welding documentation and extensive quality package - Ideally suited for reinstallation in pharmaceutical plants or environments requiring validated applications.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Process Systems LEP13.2 KK6771 Package 11 System type: Temperature Control Unit – LEP13.2 AS Storage Project: Ammonium Sulfate Supply and Disposal Unit: KK6771 Year of manufacture: 2020 Serial number: 1003622 Kdjdpfoyl I S Dox Ac Esr Equipment number: 20022749 LEP13.2 – AS Storage Temperature Control Unit TECHNICAL DATA Product: LEP13.2 – AS Storage Temperature Control Unit Medium: Ammonium sulfate Design: Pharmaceutical / GMP Product-contact materials: 1.4435 / 1.4301 stainless steel Dimensions (L x W x H): approx. 1900 x 1545 x 1580 mm Control air supply: 6 bar (AIP) Tested pressure range: up to approx. 3–4 bar (Leak test documented) MAIN COMPONENTS 2x centrifugal pumps Horizontal shell-and-tube heat exchanger Electric flow heater Expansion vessel Pressure and temperature measurement points Pneumatic control valves Manual ball valves (GEMÜ) Stainless steel control cabinet / terminal box Fully insulated piping APPLICATION The temperature control unit is used for precise temperature regulation in the ammonium sulfate storage system of a pharmaceutical production facility. Suitable for: - Pharmaceutical production environments - GMP-regulated systems - Media temperature control systems - Turn-over package integration DESIGN / CONSTRUCTION - Complete, pre-assembled skid unit - Stainless steel frame construction - Compact design with unobstructed maintenance access - Fully piped and insulated - Clear labeling of all measuring points and fittings - Pharmaceutical-grade execution as per CSL Behring customer specification - P&ID checked - Layout checked - Multiple documented leak tests - Calibrated measuring devices with certificates The system is fully assembled and prepared for seamless integration into existing pharmaceutical installations. CONDITION - As-new / Project system - Year of manufacture: 2020 - FAT completed - Pressure test passed - Complete documentation available COMPREHENSIVE DOCUMENTATION Includes, among others: - Factory certificates according to EN 10204 - Material lists - EU declarations - Inspection reports - Documentation of installed equipment - I&C documentation - As-built isometrics - User manual - Calibration certificates SPECIAL FEATURES - Project-specific pharmaceutical design - GMP-compliant manufacturing - Complete skid-mounted construction - Compact footprint (approx. 1.9 x 1.5 m) - Maintenance-friendly layout - High-quality piping insulation - Ideal for technical areas close to cleanrooms

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1393, arm reach: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! Includes notebook and PCdemis 2016 software! TECHNICAL DETAILS FP2 Mobility Pack: included Measuring software: PCdemis (2016) Notebook: DELL M 6800 with a 17-inch screen and Windows 10 Tripod: Brunson heavy-duty rolling tripod, type 230 FIX Measuring range: 2,500 mm Accuracy class: 5 Number of axes: 6 Target single-point deviation: 0.020 mm Kdodpfxezrd R Ue Ac Ejr Target volumetric accuracy: ±0.029 mm Arm weight: 8 kg Probe set: Probe with ruby ball 3mm, 6mm and with steel ball 15mm EQUIPMENT - Carbon fiber double-tube construction enables separation of stability and measurement - AbsoluteArm series can start measuring directly without referencing - Probing system with automatic probe recognition - Mounting plate with magnet - FP2 Mobility Pack - Transport case - Magnetic tripod - Test bar L = 700 mm - Test sphere D = 25 mm - Power supply with connecting cable - USB cable measuring arm - notebook - Dust cover - New pressure cylinder installed - Relabeling of the measuring arm before calibration 2023 - ISO 10360 acceptance with certificate 2023 is included Shipping conditions - Ex works, without additional packaging (measuring arm in case and notebook in protective cover) and Brunson rolling tripod – i.e. 3 parts - If the buyer arranges collection via a shipping company, the seller recommends special packaging (approx. 160 x 70 x 70 cm cardboard box on a pallet, with bubble wrap inside) and a Euro pallet (Brunson rolling tripod) at a price of €250, secured with strapping to the pallet.

Condition: used, KB Prüftechnik Hardness Testing Machine, Type: KB 750 BVRZ Machine Type: KB 750 1 kg - 750 kg UNIVERSAL DIGITAL KB universal hardness testing machines for automatic and standard-compliant hardness testing. Suitable for all hardness testing methods in the load range HV 0.2 1 - 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (only HK 1), ball indentation hardness (plastics) and depth measurement according to Vickers and Brinell. Fully automatic testing sequence, evaluation of the indentations on the integrated LCD monitor using an integrated video camera and zoom lens guarantees the highest evaluation accuracy according to the standard. All hardness values are displayed digitally immediately. User-friendly and powerful control panel with a color LCD monitor, high contrast and glare-free. The measurement of the indentation is performed without parallax. The testing forces are electronically controlled and applied with the highest precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with a basic equipment package that enables immediate operation with the ordered indenters. A selection of fixtures, testing tables, indenters, lenses, hardness comparison blocks, etc. is available. A connection to a PC or central computer is possible with all KB hardness testing machines. In conjunction with the fully automatic software and motorized cross table, the machine can be operated as a fully automatic system. fully automatic testing sequence optical evaluation via integrated video evaluation extremely user-friendly and powerful large LCD color display industrially designed foil keypad variable software adaptation Zoom lens 1:7 parallax-free measurement load cells, controlled load application, LED lighting Rockwell resolution 0.025 HRC extremely powerful 200 freely definable test programs Calibration machine accuracy (option) new LED ring light (option) automatic image evaluation (option) 2 interfaces parallel + serial, as well as keyboard connection extended load range XL (option) freely switchable language selection German, English, French, Italian KB750 BVRZ: Test load 3-750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Superrockwell Testing table ∅80 mm Motor zoom 1:7 Lens 4x for HV10-HB5/750 NOT suitable for HV5 Operating function: Programmable digital panel with the following functions: Measurement of the hardness indentation on the LCD display, with adjustable measuring marks, without parallax Logically structured, simple operating guidance Any number of test programs can be created and stored (200) Automatic force selection by selecting the testing method Freely selectable application times of the testing forces Freely selectable dwell times of the testing forces Kjdpfxjzg Tyuo Ac Eedr Online help Automatic correction for curved surfaces according to DIN EN ISO Control of the fully automatic testing sequence Direct, digital hardness value display Tolerance display Conversions according to DIN 50150 Table B1 Protocol generation in DIN A4 format with standard printer via parallel interface Serial interface for data output to PC Optional network 4 languages: German-English-French-Italian Statistics functions, such as: Number of tests Min / Max Average Range Standard deviation cp / cpk Histogram (Changes and errors in the technical data are subject to change!)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Model: MIRACLE 081507  With RATIONAL-DMIS CAD version 6.9       Measurement range:   X = 800 mm, Y = 1500 mm, Z = 700 mm    Accuracy:   LEADER MIRACLE incl. PH10 head + SP25 – MPEe  SP25 E=2,7+3L/1000 L=mm    Temperature range:  Degrees: 20 – Total temperature variation +/-1°C over 48 hours.  Otherwise according to the technical documentation    Renishaw probe system:  Renishaw PH10M  Renishaw SP25 Body scanning  Renishaw TM-20 “gentle” module incl. 1 pcs. Module  Renishaw SP25-1 incl. 1 pcs. Holder  Renishaw SP35-2 incl. 1 pcs. Holder  Key/probe set – Renishaw M2  Renishaw S3 Plus controller  Calibration ball Ø25.000 incl. Stand  Renishaw Rack for FCR25 incl. 6 pcs. Gates  Kodpfsurf Egox Ac Eedr Incl. Option “Tip changer”  Renishaw Joystick    Rational DMIS for Windows is an interactive graphics software that provides advanced options such as:  User-friendly operating system WIN7 or WIN8  Unique interactive 3D graphic engine import of Iges and Step format  Off-line programming and support of a simulated measuring machine environment  Powerful analytical report generation  Automatic intelligent naming of the measured object  Possibility of connecting a measuring machine to an optional CAD system that uses either IGES, STEP or DMIS  RATIONAL-DMIS CAD option for measuring and analyzing contours and form tolerances 

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Storage Tank – 1.4404 – PED Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o., Slovenia Type: SVBBH-3500 Tag no.: Serial number: 1003461 Year of manufacture: 2020 Condition: As new / unused BH6771-BH1001 Package 29 TECHNICAL DATA Product type: Storage tank / process vessel Nominal capacity: 3,500 liters Total volume: approx. 4,082 liters Empty weight: approx. 1,750 kg Material in contact with product: 1.4404 (AISI 316L) Internal surface: electropolished Surface roughness: tested according to roughness protocol (Ra ≤ 0.8 µm) Permissible pressure PS, vessel: -1 / +3 bar Test pressure PT, vessel: 5.6 bar Permissible pressure PS, jacket: -1 / +6 bar Test pressure PT, jacket: 10.8 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 2 Design according to AD 2000 Pressure vessel according to PED 2014/68/EU Category III Module G – single item inspection CE marking FAT – Factory Acceptance Test Full FAT inspection carried out on 26.08.2020. Documentation check: complete and released Welding documentation inspected and compliant Delta ferrite inspection conducted, no deviations Surface roughness checked and compliant All inspections rated “OK”. EXECUTION • Horizontal cylindrical pressure vessel • Dished heads • Multiple CIP connections on end face • CIP spray ball system • Manhole with round pressure cover • Pressure and temperature connections • Bottom discharge outlet • Stainless steel support legs • Pharmaceutical-grade weld seams DOCUMENTATION – fully available • EU Declaration of Conformity • TÜV certificate • Module G individual inspection • FAT protocols • Welding documentation • WPQR / WPS • 3.1 Material certificates • Non-destructive test reports • Delta ferrite test report • Roughness protocol • Dimensional accuracy report • Calibration certificates • Technical drawings • Parts list • Operating and maintenance manual Complete digital documentation folder available. CONDITION • Never in productive use • Stored item • Interior surface in absolutely as-new condition • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production facilities • Biotechnological applications SPECIAL FEATURE Custom-manufactured BRINOX pharmaceutical tank with full FAT acceptance, verified welding documentation, delta ferrite certification, documented surface roughness, and comprehensive PED Module G single-inspection. Kdedpfjylnppox Ac Esr Not a standard tank – but pharmaceutical grade suitable for validation, with complete technical documentation throughout.

Condition: used, Werth Type: Werth SCOPE-CHECK 400 3D coordinate measuring machine Technical data: Measuring capacity (X x Y x Z): 400 x 200 x 200 [mm] Work table with integrated electrical cabinet: 1600 x 950 x 780 [mm] Max. weight on table: 20 [kg] Operating conditions: * Relative humidity: 40 - 70 [%] * Temperature: 10 - 40 [°C] Measuring accuracy (20°C, 8 kg, magnification 5X, resolution 0.5 microns) On table: E1 = 1.8 + L/120; E2 = 2.0 + L/150 All positions: E1 = 2.5 + L/120; E2 = 2.9 + L/100; E3 = 4.5 + L/75 Kdjdpfezh Dq Hjx Ac Eor Incremental scales Ball screw drive with servo motor Optical magnification (video): 0.5X to 5X Optical field (video): 13 x 10 [mm] to 1.3 x 1 [mm] Movement on linear guide with ball bearing Combinable lighting: diascopic, episcopic, ring-shaped LED/axial Voltage: 230 [V] Frequency: 50 [Hz] Power: 2 [kW] Weight: 300 [kg] Accessories CN Lighting control via software Video sensor IP for detection of measuring contour (screen display) Electronic control for table movement Manual control for table via joystick Predisposition for mechanical probe Calibration, 3D measurement, probe communication software Scope of delivery: (Werth coordinate measuring machine with accessories as shown) Condition: used (Changes and errors in the technical data and specifications are reserved!) Please inquire about transport options before purchasing. We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 2013, Punching capacity 220 kN laser capacity in Watt 4000 travel -x axis 2500 mm travel -y axis 1250 mm Cutting capacity structural steel 8 mm Cutting capacity stainless steel 8 mm Cutting capacity aluminum 6 mm workpiece weight 280 kg weight of the machine ca. 24.000 kg dimensions 10130 x 8898 x 2328 mm Includes DORNER 2200 Series conveyor belt Kedpfoy D T S Usx Ac Esdr Operating hours: - Approx. 7,880 h Standard equipment: - Travelling ball-bearing tables - Linear magazine for tool stations and clamping jaws - 22 tool stations, 3 clamping jaws - Foot switch for closing the jaws - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Liftable laser cutting table - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control Cutting head: - Lens cutting head with 170 mm lens - Universal quick-change device (UTI) with bus connection - ControlLine Punching head: - Electro-hydraulic punching head - Hydraulic single-tool holder with 360° rotation - Programmable hold-down device (active/passive/re-adjustment) - Tool length compensation - Spray lubrication for punch - Punching scrap extraction - Level monitoring for thread forming and tool lubrication Control system: - Open control system based on Rexroth IndraMotion MTX - 15" TFT color screen - Teleservice via the Internet - Automatic shutdown - Production plan Data transfer - USB interface - RJ45 network connection Safety: - CE marking - Dual-beam safety light curtains - Emergency stop Tools: 2x 10-function multitool 1x 5-function multitool 1x 5-function EeasyType multitool 5x thread forming tools 1x Multishear 1x calibration tool 1x ball deburrer 2x gills M3–M8 threading dies Centering studs (top and bottom) Countersinking tools for 1.5 and 2 mm Various countersink and form countersink tools

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Machine Description BRINOX LEP 12 – CIP System Precipitation PRE LEP 12 CS6725 Package 5 Manufacturer BRINOX Prozess- und Edelstahltechnik GmbH, Offenburg Year of Manufacture 2020 Serial Number 1003614 Technical Data Compact CIP skid system in stainless steel frame design. Product designation: LEP 12 – CIP System Precipitation PRE. Dimensions approx. 1520 x 970 x 1994 mm. Product-contact parts: Stainless steel 1.4435. Frame and structural components: Stainless steel 1.4301. Integrated shell-and-tube heat exchanger by NEUMO. Centrifugal pump in hygienic design. Piping fully welded in pharmaceutical grade. Kdjdpfx Acsyl H Taj Ejr Insulated media lines. Fittings incl. GEMÜ ball valves. Various integrated pressure gauges and measuring instruments. Calibrated pressure measurement system (Fluke pressure transducer, measuring range −1 to 20 bar, resolution 0.001 bar, accuracy 0.06 % FS). Media Connections: NaOH Acetic acid CIP supply CIP return Black steam Black steam condensate Neutralized wastewater Pressure tightness test performed with compressed air. Test pressure range approx. 3.19–3.24 bar. Maximum measured pressure drop < 0.015 bar during the test period. Result: passed. Application CIP cleaning system for pharmaceutical process plants, especially for precipitation vessels. Suitable for caustic and acid cleaning as well as steam integration. Designed for hygienic applications in pharmaceutical production. Construction Welded, compact skid design with robust stainless-steel frame construction. Hygienic piping layout with defined media paths. Integrated shell-and-tube heat exchanger for CIP media temperature control. Integrated process pump, valve technology, and instrumentation on a compact frame. General tolerances according to EN ISO 13920. Industrial design with crane lugs for transport. Condition New, unused, and in original packaging. The system was only inspected as part of the FAT process and has never been in production use. FAT / Documentation Status Complete Factory Acceptance Tests carried out. Pressure tightness tests successfully passed. Calibration certificates available. All test protocols fully documented. Complete Documentation List FAT documentation Pressure test protocols Calibration certificates P&ID 3D drawings Material and welding documentation Nameplate and manufacturer documentation Special Features Pharma-grade material selection. Compact, immediately ready-to-use skid unit. High-quality components from renowned manufacturers. Complete technical documentation available. Immediately available.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Product: LEP13.1 – AS-Batch Temperature Control Unit System type: Temperature control unit for ammonium sulfate batch system Year of manufacture: 2020 Serial number: 1003620 Tag number: MR-ASF-ASF61-KK6770 Equipment number: 20022748 Media Connections / Process Data WCOV – Chilled water supply: 6 °C WCOR – Chilled water return: 12 °C WSV – Process/municipal water AIP10 – Control compressed air 6 bar Design as a closed temperature control module with integrated pump and heat exchanger technology. Dimensions Overall dimensions as per layout: approx. 1920 x 1435 x 1573 mm (L x W x H) Compact, skid-mounted unit with welded stainless steel frame. Construction Kdsdpfoyl Izxex Ac Eor Frame construction in stainless steel Fully insulated piping (industrial insulation) Stainless steel shell-and-tube heat exchanger Electrical inline water heater WT1011 Pump PU1021 Pump PU9203 Heat exchanger WT1001 Expansion vessel BH9701 Fittings: GEMÜ shut-off valves Pneumatically actuated valves Manual ball valves Pressure gauges Sensors and instrumentation as per P&ID Complete piping and component labeling provided. Condition New and in original packaging. Not yet put into operation in production. Factory new condition. Supplied directly by the manufacturer Brinox. FAT / Test Status FAT carried out. Leak test: Test medium: Compressed air Test pressure: approx. 3 bar Holding time: 1 hour Result: Passed Calibration: Pressure gauge calibrated Measuring range: 0–10 bar Calibration certificate available Traceable to national standards Documentation Turn-Over-Package complete Included documents: FAT plan FAT report Non-conformance form Layout drawing check Maintenance and calibration accessibility check P&ID review Leak test report Calibration certificates Documentation check Factory certificate 2.1 according to EN 10204 LBM material list incl. EU declarations List of installed components – equipment List of installed components – instrumentation points (PLT) Material parts list for as-built isometry Key Features GMP-compliant construction Pharma/biotech project quality Full traceability Compact plug-and-play skid design Completely piped, insulated, and ready to connect Immediately available

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), Batch ball mills find applications in various industries where the processing of materials in discrete batches is required. The versatility of batch ball mills makes them suitable for a range of applications. Here are some common batch ball mill applications: Kodpfxsq I N H No Ac Eodr 1. Ceramics Industry: - *Glaze Preparation:* Batch ball mills are extensively used in the ceramics industry for preparing glazes. Raw materials such as feldspar, quartz, and clay are ground with ceramic balls to achieve the desired particle size for glaze formulation. 2. Chemical Industry: - *Material Grinding:* Batch ball mills are used for grinding and blending various chemical materials. This includes the production of pigments, dyes, and other specialty chemicals where precise particle size control is crucial. 3. Pharmaceuticals: - *Drug Formulation:* In pharmaceutical manufacturing, batch ball mills are used for grinding and blending powders to create drug formulations. The controlled environment provided by these mills is essential for maintaining the integrity of pharmaceutical compounds. 4. Food Industry: - *Ingredient Mixing:* Batch ball mills may find application in the food industry for mixing and grinding ingredients. This can include the production of food additives, flavorings, and other powdered or granular products. 5. Mining and Minerals Processing: - *Ore Grinding:* Batch ball mills are used in mining and minerals processing for grinding minerals and ores. The controlled grinding helps in obtaining the desired particle size for subsequent processes, such as mineral separation or extraction. 6. Paints and Coatings: - *Pigment Dispersion:* In the paints and coatings industry, batch ball mills are employed for dispersing pigments into paint formulations. Achieving a uniform particle size is crucial for the quality and appearance of the final coating. 7. Building Materials: - *Raw Material Grinding:* Batch ball mills are used in the preparation of raw materials for the production of building materials, such as cement and concrete. Grinding of materials like limestone and clay helps in obtaining the desired fineness for subsequent processes. 8. Electronic Materials: - *Ceramic Powder Processing:* In the electronics industry, batch ball mills can be employed for processing ceramic powders used in the production of electronic components and insulating materials. 9. Research and Development: - *Material Testing:* Batch ball mills are often used in research and development laboratories for testing and optimizing material formulations. They provide a controlled environment for small-scale processing and experimentation. 10. Customized Applications: - *Specialized Processes:* Batch ball mills can be adapted for various specialized processes in different industries where precise grinding and mixing are required. Custom modifications can be made based on specific application requirements. When using a batch ball mill, it's important to consider factors such as the type of material being processed, desired particle size, and the specific requirements of the end product. Additionally, following the manufacturer's guidelines and maintaining proper operating conditions are essential for efficient and effective milling processes. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer BRINOX d.o.o. Project Number B-0001113-LEP2.3 LEP 2.3 KK6762 Package 9 Module M024 Product Description LEP2.3 – Wash Solution Temperature Control Unit Serial Number 1003572 Equipment Number 20022782 Tag Number MR-INH-VPR61-KK6762 Year of Manufacture 2020 Technical Data System Type Kdsdoyl Iwtspfx Ac Eor Pharma temperature control skid for precise temperature regulation of wash and elution solutions. Constructed as a compact, multi-level stainless steel frame design with fully integrated pump, heat exchanger, and valve technology. Dimensions Length 1920 mm Width 1365 mm Height 1840 mm Design Fully pre-assembled, insulated temperature control skid Pharmaceutical design according to GMP requirements Industrial stainless steel frame construction Materials Product-contact parts: Stainless steel 1.4435 / 1.4571 Frame construction: Stainless steel 1.4301 Welds as per EN ISO 13920 D Insulation Completely insulated piping and equipment Closed-cell high-performance insulation with black protective sheathing Main Components PU1021 Process Pump PU9203 Chilled Medium Pump WT1001 Plate Heat Exchanger WT1011 Finned Tube Heat Exchanger BH9701 Expansion Tank Pneumatic Control Valves GEMÜ Stainless Steel Ball Valves Pressure Transmitters Temperature Measurement Points Pressure Gauges Electrical Junction Box with Warning Labels Stainless Steel Cable Trays Media Chilled Brine Supply / Return Wash Solution Process Medium Control Air 6 bar All media connections sealed at factory and packaged securely for transport. Leak Testing Performed as pressure test with compressed air. DP-01 Medium: Compressed Air Test Pressure: 3.15 bar Pressure Drop: 0.13 bar Date: 27.07.2020 Result: Passed DP-02 Medium: Compressed Air Test Pressure: 3.28 bar Pressure Drop: 0.07 bar Date: 26.07.2020 Result: Passed Pressure holding time: 1 hour each No leaks detected Calibration Certificates Calibration Laboratory: LOTRIČ Metrology Certificates according to EN ISO/IEC 17025 Measurement Ranges: –1 to 20 bar and 0 to 10 bar Calibration performed Documentation Scope FAT Plan and Report Deviation Report Layout Drawing Check Maintenance Inspection P&ID Leak Test Report Calibration Certificates Works Certificate 2.1 EN10204 Material List As-Built Isometrics Complete Turn-Over Package Inspection Status FAT performed Pressure test passed Calibrations available PED-compliant design Pharma documentation complete Application Temperature control of wash and elution solutions in biopharmaceutical production facilities Suitable for GMP environments Condition New system Original packaging Unused Year of manufacture: 2020 Factory condition Fully documented Immediately available