Used Calibration System for sale (866)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Schröder Hamax 800 year of construction 2006. HAMAX 800 whole muscle stuffer is automatic filling of fresh (for example, as restructured meat) or cured meat parts/pieces of meat (for example, as raw and cooked cured meat) in artificial casings. The fundamental principle of the machine is based on a hydraulically driven piston that presses the meat into the casings. The HAMAX 800 whole muscle stuffer forms the technical requirement for increasing the efficiency in the production of sliced goods which are calibrated in length and thickness. In combination with an automated double clipping-machine, swift and efficient processing can be reached, which was previously very time-consuming for these products. The combination of the whole muscle stuffer and the integrated cutting system is the innovative factor. This affects the exact portioning of pork loins with tendon. 2x filling pipes including 95 mm & 125 mm. Djdjxrnkfepfx Ah Uokw Capacity up to 1200 kg / hour.

Condition: used, This listing is for a Sartorius MSA4202S 8.2g-2500g Precision Balance The unit is in full working condition and is ready for immediate release. Dsdpfx Aoxuu Hlsh Uokw Modular design (part of the Cubis® series) – the system is built of a weighing module + display/control unit + interface modules, designed for flexible configuration. High-resolution colour TFT display + touchscreen interface, offering an intuitive user interface. Multiple interfaces standard: USB, Ethernet, RS-232, SD card reader for data transfer and traceability. Functions typically include: weighing, density determination, averaging, formulation, percentage-weighing, check-weighing, totalising. Assisted (and optionally motorised) levelling; the system detects inclination and assists the user in levelling the instrument. Automatic internal calibration (isoCAL) for improved stability and lower drift. GLP/GMP/traceability ready: audit trail functions, user profiles, etc

Condition: used, Year of construction: 1978, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: calibration roller Diameter of 1st roller: 260 mm Type of 1st roller: grooved rubber roller Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1100 mm Dkodpfoxta H Iox Ah Usw Abrasive belt speed 1st unit: 25 m/sec Drive unit 1: 20 kW 2nd belt: pad unit Sanding shoe 2nd unit: pneumatic Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1100 mm Abrasive belt speed 2nd unit: 25 m/sec Drive unit 2: 13.5 kW Cleaning brushes: Yes Feed speed: 7 m/min / 14 m/min (selectable) Control: manual control panel Electric/pneumatic belt oscillation: Yes Table lift: electro-motorized Table display: mechanical numerical indicator Operating pressure: 6 bar Machine number: 185 Weight approx.: 2500 kg Dimensions: 1800 x 2000 x 1900 mm Extraction diameter: 2 x 200 mm Location: Nattheim

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Dedpfxsu Dahns Ah Uskw Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: used, Vötsch Model: VCS 7034-5 Climatic Test Chamber, Water-Cooled Dsdpfx Ahsxqzbbe Ujkw Test chamber volume: 335 liters Specifications for temperature testing: Temperature range: -70 to +180°C Temporal temperature deviation: K ±0.1 to ±0.5 Spatial temperature deviation: K ±0.5 to ±2.0 Temperature gradient: 1 to 4 K Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Specifications for climate testing: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R404A / R-23 For your safety as a buyer, please take note of the following information! The following procedures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and error) If you have further questions, we would be happy to answer them by phone.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 4ROLL 3000X 15 MM, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller diameter: 310 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 800 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 25 mm, overall weight: 8,500 kg, total length: 5,100 mm, total width: 1,500 mm, total height: 1,800 mm, power: 7.35 kW (9.99 HP), number of digital displays: 2, warranty duration: 12 months, cone diameter: 400 mm, working length: 3,000 mm, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 ROLL DUAL PRE-PINCH ROLLING MACHINE NEW -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: Dkjdowfc S Tepfx Ah Ujw -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Dkedpfoxu U Trex Ah Usw Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: used, This listing is for the Sartorius Tare ENTRIS2201-1S Balance + Tare Printer The unit is in full working condition and is ready for immediate use The Sartorius ENTRIS2201‑1S (also referred to as ENTRIS 2202‑1SUS in some regions) is a precision top-loading laboratory balance designed for reliable, accurate weighing of samples up to approximately 2,200 g with 0.01 g readability. Dedpsxui S Aofx Ah Ujkw Key Specifications: Capacity: 2,200 g Readability (Resolution): 0.01 g (10 mg) Repeatability: Typically 0.01 g Linearity: Approximately 0.03 g Weighing Pan Size: Around 182 mm × 182 mm (7.1″ × 7.1″) Calibration Type: External calibration (requires separate calibration weight) Display: Backlit, high-contrast screen for clear visibility Interface Options: RS‑232 port for communication with PCs or printers Built-In Functions: Includes modes for basic weighing, counting, percent weighing, animal weighing, and density determination Language Support: Multiple languages supported such as English, French, German, Italian, Polish, Russian, Spanish Other Features: Anti-theft locking capability, easy-to-clean removable pan and draft shield Stabilization Time: Approximately 1.5 seconds Dimensions & Build: Compact size, robust design ideal for lab environments

Condition: excellent (used), Year of construction: 2008, operating hours: 10,755 h, functionality: fully functional, spindle speed (max.): 750 rpm, feed length X-axis: 470 mm, feed length Y-axis: 330 mm, feed length Z-axis: 640 mm, type of input current: three-phase, grinding wheel diameter: 150 mm, overall weight: 4,500 kg, grinding spindle speed: 10,500 rpm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, grinding spindle motor power: 7,000 W, workpiece diameter (max.): 320 mm, input frequency: 50 Hz, input voltage: 400 V, year of last overhaul: 2025, WALTER Helitronic Basic - CNC tool grinding machine TECHNICAL CHARACTERISTICS : Year of manufacturing : 2008 CNC control : FANUC 310i - MODEL A5 Software installed: Tool Studio Version 1.70.0.136 Number of axes: 5 Stroke X axis: 470 [mm] Stroke Y axis: 330 [mm] Stroke Z axis: 640 [mm] Traversing feeds X, Y and Z axes: 15000 [mm/min] A axis: 360 [°] C axis: +/- 200 [°] Max. workpiece lenght : complete processing: 255 [mm] Max. workpiece lenght : peripheral grinding: 350 [mm] Max. workpiece lenght : end face grinding: 280 [mm] Max. grinding diameter: 320 [mm] Max. grinding diameter with automated work table: 290 [mm] Grinding spindle attachment: NCT Grinding spindle diameter: 70 [mm] Grinding wheel speed: 10500 [rpm] Grinding spindle motor power: 7 [kW] Max. diameter grinding wheel: 150 [mm] Workpiece spindle nose: ISO 50 Max. part weight in part holder headstock: 20 [Kg] Coolant pump pressure: 7 [bars] Collant pump flow rate: 80 [l/min] Lubrication tank capacity: 350 [l] Supply voltage: 400 [V] Number of running hours: 10755 [h] Weight: 4500 [Kg] EQUIPMENT INCLUDED: x1 Software TOOL STUDIO 1.7 x1 ECO LOADER automatic tool loader x1 tool palett (20 positions) x1 automatic tool clamping unit x1 RENISHAW tool probe x1 calibration ball option : automatic calibration of X, Y and Z axes x1 DSL AIR TECHNOLOGY AES-SIGMA 20 type oil mist extractor x1 lubrication tank x1 paper band filtration unit x1 GRUNDFOS coolant pump x1 fire-fighting system (to be inspected by the purchaser by a qualified body) x2 wheel flanges + spacers Dodjwu Tygspfx Ah Uskw x1 machine parameter backup x3 technical manuals (paper format) x1 technical documentation (CD-ROM format) ADDITIONAL INFORMATION : Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: SK03UT6P0097 / SK01TMFY3097, type of input current: AC, input voltage: 230 V, The 3D laser scanner Trackscan Sharp49 offered here is a mobile, tracker-based 3D scanner, year of manufacture 2023, with a new price of €100,000. The exceptional feature of this device is its ability to digitalize components without the need to attach targets directly onto the part. This is made possible by targets integrated into the scanner housing, which are detected by the tracking unit. This measuring instrument is ideally suited for rapid digitalization of large components—spanning several meters—while maintaining comparatively high accuracy. The device was calibrated in an ISO 17025 accredited laboratory. The offer includes the scanning software. Optionally available: a touch probe for contact point measurement on objects and a laptop. Sample application areas include: - Digitalization of manufactured parts for subsequent metrological evaluation, such as first article inspections - Digitalization of objects/spare parts for downstream reverse engineering, for example, to manufacture replacement parts or implement design modifications - Digitalization of larger machinery and plant areas for planning and simulation purposes Dksdpfxew Id E Ej Ah Usw - Digitalization of vehicles for tuning applications Technical specifications: - 3 laser modes - Scan rate: up to 2,600,000 measurements per second - Volumetric accuracy: * At 10.4 m³: up to 0.049 mm * At 28.6 m³: up to 0.067 mm * At 49.0 m³: up to 0.089 mm - Recommended component size: 0.1 m – 12 m - Complete tracker case weight: 37 kg - Complete scanner case weight: 21 kg - Tracker unit weight: 6.8 kg - Scanner unit weight: 1.75 kg The device is fully operational and can be inspected under power.

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand HEIDENHAIN Model TNC 640 Main Drive Spindle speed range 20 - 14000 Tool taper ISO40/SK40 DIN69871 Number of axis 3 Movement X-Axis Movement 1150 mm X-Axis Rapid Traverse 42 m/min Y-Axis Movement 700 mm Y-Axis Rapid Traverse 42 m/min Z-Axis Movement 550 mm Z-Axis Rapid Traverse 42 m/min Table Outer length 1460 mm Outer width 750 mm Additional Equipment Infrared touch probe Make: Renishaw PP 60 optical (OMP 60) Tool length and diameter measurement Automatic cleaning of tool holders using an air jet Tool cone calibration equipment Safety package for power supply failure Overvoltage limiter Undervoltage monitoring with rapid braking activation Electronic handwheel Dkedpfxjxpklyo Ah Usw Chip extractor (chip scraper) This 3-axis DMG MORI DMC 1150 V was manufactured in 2016. A robust vertical machining center featuring a 1150 mm X-axis, 700 mm Y-axis, and 550 mm Z-axis. It boasts a rapid traverse of 42 m/min and a speed range up to 14,000 rpm. Equipped with a Heidenhain TNC 640 control, 30-position SK40 tool magazine, and a chip extractor system. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 1150 V machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Koenig Mini Rex 4000 Futura bun roll machine 2-pockets with formstation DR-RR 400. For the production of rounded, long-rolled, long-rolled and folded as well as flattened products drum and pistons SKG54-AKG70 weight range 25-140 grams several weight ranges with other drums is possible through the use of combined stamp sizes, on request Dkodpfx Ahjxu E Rhs Uew max. cap. 4000 pcs/h year R 2021 compact design fully automated dividing and rounding of wheat doughs and rye- -wheat doughs with a maximum rye percentage of 40% excellent results with the production of round, long-rolled, long-rolled and folded as well as flattened goods tried-and-tested in thousands of in-store bakeries height-adjustable calibrating head, folding net belts, lower belt and upper belt for ergonomic working with the following functions: transporting, long rolling, pressing flat teflonised collecting drawer for manual product removal high level of operating comfort quick and easy cleaning on account of plug-in elements stainless steel design power supply: 1.5 kW weight approx. 460kg

Condition: excellent (used), REF: MM6203 1 x Fortress Technology metal detector with flip-arm reject into 2 x reject bins. Dedsxdincjpfx Ah Ujkw Technical specification ⚙️ ✅ Model - Stealth. ✅ Aperture dimensions - 450mm wide x 150mm high (115mm useable). ✅ Belt dimensions - 2000mm long x 380mm wide. ✅ Last calibrated - March 2023

Condition: new, Year of construction: 2024, working width: 950 mm min. workpiece height: 4 mm max. workpiece height: 170 mm height adjustment: electrically read out height: digital electronic control: Fox 500 KTR aggregates: 1 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad dust brush: no Dkodpfx Ahoknyhls Ujw motor power: 7,5 kW suction connection: 140 mm machine length: 1388 mm machine width: 1545 mm machine height: 1668 mm weight: 660 kg

Condition: excellent (used), Year of construction: 2020, operating hours: 916 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 530 mm, workpiece weight (max.): 500 kg, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 130 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, MAZAK Variaxis C600 – Vertical Machining Center TECHNICAL CHARACTERISTICS: Number of simultaneous axes: 5 Stroke X axis: 650 [mm] Stroke Y axis: 550 [mm] Stroke Z axis: 530 [mm] Feed rate on X, Y and Z axes: 42000 [mm/min] Min. distance spindle nose / table: 50 [mm] Max. distance spindle nose / table: 580 [mm] Table dimensions: Ø600 x 500 [mm] Max. load on table: 500 [Kg] Stroke C axis : table revolution: 360 [°] B axis swivelling stroke: -30 [°] / +120 [°] Spindle type: BT40 Max. spindle speed: 12000 [rpm] Spindle power: 11 [kW] Tool changer magazin number of stations: 60 Max. tool length: 300 [mm] Max. weight of single tool: 8 [Kg] Max. tool diameter: 80 - 130 [mm] Total power required: 46.7 [kVA] Supply voltage: 400 [V] Number of running hours: 916 [h] Machine dimensions: 2350 x 2962 x 3039 [mm] Layout dimensions: 5010 x 2470 [mm] Weight: 10000 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW part probe type RMP600 x1 RENISHAW tool probe type PRIMO LTS x1 RENISHAW calibration sphere x1 electronic handwheel x1 chip conveyor x1 high-pressure pump 15 [bar] Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Dkjdpowv T I Hsfx Ah Usw Machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling machines, drill and tap machines, and CNC grinding machines.

Condition: refurbished (used), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 400 mm, warranty duration: 12 months, total height: 2,300 mm, type of input current: AC, total width: 1,120 mm, total length: 1,540 mm, overall weight: 1,350 kg, input voltage: 230 V, table load: 30 kg, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Factory-reconditioned Mahr Multiscope 664 (Including certified factory acceptance before delivery) Factory-reconditioned premium multisensor measuring center with guarantee and warranty rebuilt 2025. INCL. latest SW update, 18-month free SW update service, free lifetime SW hotline and user support. Online or optionally on-site demos with customer parts, application-related advice from accredited Profitech measuring laboratories during project planning. Complete service: Dodpfxju Dw S Re Ah Ujkw Optional complete service: - Delivery, assembly, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual training and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly from Profitech and without a financial institution. Measuring device can be individually configured to customer requirements! Multisensor measuring device equipped with camera system and Renishaw touch system. Measuring range of all sensors: 600x600x400mm (l x w x h) Dimensions: 1540x1120x2300mm (l x w x h) Space requirement: 1940x1520x2500mm (l x w x h) Weight: approx. 1300kg (including control cabinet and base frame) Max. load weight: glass plate 40kg Accuracy: U1=2.2 + L/150; U2=3.0 + L/125; U3=3.2 + L/100 (L= measuring length in mm) max. travel speed: 250mm/s incl. camera with 2-stage zoom incl. laser incl. LED ring light incl. Renishaw TP200 touch probe system incl. frame grabber (Eagle) incl. Windows 10 incl. new Optichek 3D 5.0 ​​evaluation software Incl. Renishaw TP200 touch probe system The measuring device can be programmed for customer-specific parts during optional commissioning and calibration so that you are immediately able to run your measuring programs before any training that may be necessary.

Condition: reconditioned (used), The JUKI MB-1800B is an automatic button sewing machine designed to deliver high speed, precision, and reliability. Manufactured by the Japanese brand JUKI, a benchmark of excellence in industrial sewing machinery, this model meets the needs of workshops, garment factories, and tailoring shops requiring productivity and consistent results. The machine is used but has been fully overhauled by our specialized technicians. Every component has been inspected, cleaned, and tested to ensure performance equal to a new machine. It is reliable, ready for immediate use, and guaranteed to provide long lifespan and impeccable stitch quality. Brand / Model: JUKI MB-1800B Type: Automatic button sewing machine Condition: Used – fully serviced and tested Sewing system: Double-needle movement for even and durable stitches Sewing speed: Up to 1,500 stitches/minute (depending on fabric and button type) Applications: 2- or 4-hole buttons on light, medium, and heavy fabrics Quick adjustments for stitch length, thread tension, and stitch count Automatic lubrication to minimize wear and ensure low maintenance Quiet, high-performance motor—ideal for intensive production environments Advantages The JUKI MB-1800B is engineered for high performance and practical, reliable operation: • Fast and accurate button sewing with perfect centring and secure attachment. • Wide versatility—compatible with various button types and sizes. • Easy adjustments to accommodate different materials and thicknesses. • Robust build and reliable mechanics, characteristic of JUKI quality. • Low noise and minimal vibration for a comfortable working environment. • Simplified maintenance, thanks to automatic lubrication and easy access to key components. Overhauled This machine has been fully reconditioned by our specialized technical department: • Replacement of all wear parts with original or certified compatible spares. • Comprehensive cleaning and calibration of the motor, mechanisms, and sewing systems. • Functional sewing tests and final quality inspection. Dedpfx Ahjxrb Nho Uskw Delivered ready for immediate operation, the JUKI MB-1800B ensures reliability, precision, and consistent performance, backed by the assurance of a professionally refurbished product. Application Fields The JUKI MB-1800B is suitable for tailoring workshops and industrial garment production. It is ideal for manufacturing men’s, women’s, and children’s apparel (shirts, jackets, trousers, coats). Widely used in the textile and fashion industries where speed and uniform sewing are essential. JUKI is synonymous with Japanese quality and precision. The JUKI MB-1800B – Used and overhauled – is the perfect choice for those seeking professional performance, durability, and value. Thanks to meticulous reconditioning and JUKI’s renowned build quality, it delivers high accuracy and productivity, reducing processing times and enhancing the finish of each garment. Reliable, durable, and ready to use, this machine is a sound investment for tailoring workshops, garment manufacturers, and companies that prioritize efficiency and quality.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 20,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 28,000 mm, travel distance Z-axis: 850 mm, positioning speed: 40 m/min, workpiece weight (max.): 35,000 kg, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, NS-12020H PROFILE STEEL LASER CUTTING AUTOMATION LINE Technical Specifications Laser Power: 12000W-20000W X-axis Travel: 3500mm Y-axis Travel: 28000mm (customizable) Z-axis Travel: 800mm A-axis Travel: ±90° C-axis Travel: ±90° U-axis Travel: 30mm Maximum Speed: 40m/min Positioning Accuracy: ±0.1mm Main Features： Simple and Stylish Integrated simple structure with a mobile design. Features a main control panel, laser unit, chiller, electrical cabinet, and cantilever beam structure, all highly integrated for stable mobility and operation. Quality Assurance Precision calibration and compensation of steel profiles. Enables automatic positioning and error detection of steel profiles. High positioning accuracy, low sizing error, and a 100% one-time through-hole rate. Increased Efficiency, Reduced Costs Professional material-checking software enables one-click nesting. Optimizes cutting sequences based on raw materials and component specifications. Automatically joins leftover materials to minimize waste and reduce costs. Dsdpjvmwxxefx Ah Uokw All-in-One Service Powerful 3D five-axis CNC technology. Supports profile cutting and 45-degree bevel cuts. Adapts to various cutting processes for different applications. Enhanced Quality and Efficiency Seamlessly integrates with TEKLA steel structure design software for professional and efficient operations. Reduces complex modeling processes and saves time on manual drawings. Enables one-click generation of component process codes to significantly boost production efficiency. Smart Management Automated loading and unloading system for streamlined feeding and cutting. Fully automated one-stop workflow. Efficiently completes bulk operations, reducing manual intervention and labor costs.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 10111408, Jenoptik Opticline C314 – Optical Shaft Measuring Device Year of manufacture: 2008 Model: C314 Serial number: 10111408 Condition: Fully functional Category: Optical Shaft Measuring Device Availability: Immediately Location: Germany Calibration: 07/2025 according to DIN EN ISO 10360 and VDI/VDE 2617, certificate available Measuring range diameter: 140 mm Measuring range length: 600 mm Dksdpexqh Etjfx Ah Uow Workpiece weight: 200 / 300 / 600 N Resolution diameter and length: 0.1 µm Resolution rotation: 0.0006° Diameter accuracy: 1.0 + D[mm]/200 µm Length accuracy: 2.6 + L[mm]/200 µm Repeatability diameter: 0.3 µm Repeatability length: 1.2 µm Software user interface: Turbo Optic 3 Software measuring module: BWMS4 Power supply: 230 V Measuring system dimensions: 700 x 840 x 1355 mm Dimensions with probe: 810 x 840 x 1355 mm Machine weight: approx. 155 kg Accessories weight: approx. 300 kg Accessories: Mobile table frame Manuals: available Technical documentation: available Loading options: Forklift compatible Maintenance status: Maintenance records for 2024 & 2025 available, inspection values without any findings, overall condition: very good Optical shaft measurement systems with multi-sensor technology and highest precision This measuring device is used for quality inspection of the following products: - Turned and precision-turned parts - Components for the automotive industry, e.g. electric motors, drivetrains, steering components, and turbochargers - Blanks and pressed components for the metalworking industry - High-precision parts for medical technology, e.g. implants, bone screws and surgical instruments - Components for injection and nozzle technology - Components for the bearing industry - Parts for turbines and emergency power generators - Parts for the textile and printing machinery industry - Applications in the aerospace sector - Pneumatic and hydraulic components, e.g. pumps - Various electric motors, e.g. for fans, household appliances, positioning and drive systems

Condition: new, Year of construction: 2023, working width: 1100 mm min. workpiece height: 4 mm max. workpiece height: 170 mm height adjustment: electrically workpiece thickness display: digital aggregates: 2 Dksdpfx Aheirmg Uo Uew 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller Link grinding shoe: elastic, sector distance 56 Electronic control: FOX 500 KTR dust brush: no motor power: 15 kW suction connection: 2 x 140 mm machine length: 1650 mm machine width: 1820 mm machine height: 1960 mm weight: 1170 kg

Condition: used, Year of construction: 1997, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: Calibration roller Diameter of 1st roller: 150 mm Design of 1st roller: grooved rubber roller 90 degrees Shore Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1120 mm Sanding belt speed of 1st unit: 18 m/sec Drive of unit 1: 11 kW 2nd belt: Sanding unit shoe Sanding shoe of 2nd unit: electronic individual links 45 mm segment width Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1120 mm Sanding belt speed 2nd unit: 18 m/sec Drive of 2nd units: shared motor with 1st unit with rigid sanding pad for solid wood and frame sanding. Lacquer sanding possible: No. Fixed feed speed: 5/10 m/min. Control: Hand control panel. Electric/pneumatic belt oscillation: Yes. Table lift: Electric. Table display: Digital. Operating pressure: 6 bar. Machine number: E / 79191. Dimensions: 1930 x 1700 x 1980 mm. Motor power: 12 kW. Extraction diameter: 2 x 150. Storage location: Nattheim. Dodpfx Ahoxq Apts Uskw

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 25 kg, warranty duration: 12 months, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Multi-sensor coordinate measuring center in top condition with warranty and guarantee extensive services Hexagon Optiv 442 multisensor meter equipped with camera, laser and Renishaw probe system. · Measuring range single sensor: 410x410x200mm · Dimensions: 1232x910x1663mm · Weight: about 940kg · Max. Load weight: glass plate 30kg · Accuracies: U1 = 1.9 + L / 200; U2 = 2.4 + L / 150; U3 = 2.9 + L / 100 (L = measuring length in mm) · Max. Traversing speed per axis: 200mm / s · Incl. Camera with 2-step zoom · Incl. Laser Dkodpsdyc Uaofx Ah Ujw · Incl. LED ring light · Incl. Renishaw 6-fold button changer · Incl. Renishaw TP200 touch probe · Incl. New frame grabber (Eagle) · Incl. 2-monitor operation · Incl. Windows 7 Ultimate evaluation station · On request including transport, commissioning and calibration

Condition: used, Year of construction: 2001, functionality: fully functional, total length: 1,000 mm, Used Mahr 828 length measuring machine incl. accessories – immediately available We are offering a very well-maintained used measuring machine from the brand Mahr, type 828 (direct measuring path 0–200 mm, travel 1000 mm), including comprehensive accessories and a PC software package for the calibration of dial gauges, limit plug gauge sets, rings, etc. Operation & condition: Dsdpjxvb Hhsfx Ah Ujkw The machine is in ready-to-operate condition, has been regularly used and maintained. Inspection and demonstration can be arranged by appointment if interested.

Condition: excellent (used), CATALOG NUMBER: 6145 TECHNICAL DATA - Maximum workpiece width: 1100 mm - Maximum workpiece height: 140 mm 3 units: 1) Calibrating grooved rubber roller – 15 kW 2) Calibrating grooved rubber roller – 11 kW 3) Calibrating grooved rubber roller – 11 kW From above: - Sliding metal roller - Sliding rubber roller - Unit - 2 sliding rubber rollers - Unit - 2 sliding rubber rollers - Unit - Sliding rubber roller From below: - Infeed table: 3600 x 1000 mm - Feed speed regulated via inverter 0.25 kW - Traction belt - 3 ejection sliding rubber rollers - Pneumatic belt oscillation with photocell control - Belt blowing - Electric table elevation adjustment – lifting motor 0.75 kW - Smooth feed speed control – feed motor 2.2 kW - With vacuum pump – pump motor 4 kW - Extraction port diameter: 110 mm, 80 mm - Operating pressure: 6-8 bar - Extraction connector diameters: 3×150 mm, 3×200 mm - Overall machine dimensions (LxWxH): 3400 x 2300 x 2800 mm - Feeder dimensions (LxWxH): 3000 x 1300 x 900 mm - Pump dimensions (LxWxH): 600 x 950 x 940 mm Dkedpfxolrvi Eo Ah Usw - Weight: approx. 5000 kg Net price: 39,900 PLN Net price: 9,500 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary with greater fluctuations)

Condition: excellent (used), CATALOG NUMBER 6582 TECHNICAL DATA - Maximum workpiece width: 920mm - Maximum workpiece height: 150mm 2 units: 1) Grooved rubber calibration roller 11kW 2) Grooved rubber calibration roller + belt air blowing 7.5kW From above: - 2 rubber feeder rollers - Unit - 2 rubber feeder rollers - Unit - 2 rubber feeder rollers From below: - 3 rubber feeder rollers - Conveyor belt - Pneumatic belt oscillation - Electric table elevation - Stepless feed speed adjustment - Working pressure: 8-10 bar - Pneumatic brake - Extraction nozzle diameter: 2 x 160mm - Overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - Weight: approx. 1305kg – Made in Germany – 2 units Dksdsh Huhtspfx Ah Usw – Used sander, very good condition Net price: 27,900 PLN Net price: 6,640 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)