Used Can Baler for sale (22,748)

Condition: used, mileage: 23,723 km, power: 205 kW (278.72 HP), first registration: 11/2004, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: mechanical, emission class: euro3, total width: 2,500 mm, total height: 3,300 mm, Year of construction: 2004, Equipment: ABS, compressor, Mercedes-Benz Atego 1528 with METZ DLK 23-12 L32 CAN turntable ladder, immediately operational! ---- First registration: 11/2004 Mileage: 23,723 km Operating hours: 1,333.00 h 20-year inspection: new Chassis equipment: * 6-speed manual gearbox * Telligent brake system * Leaf suspension front and rear * Wheelbase 4,760 mm * Perm. gross weight: 15 t * Flat 130L fuel tank * Adjustable (pneumatic) steering wheel * Steel roof hatch * Engine brake with constant throttle * Axle ratio i = 5.85 * Rear axle differential lock Kwedpfox Txkhox Ab Teu * S-cab, 180 mm extended * Driver’s air suspension seat – ISRI * Passenger seat ISRI, adjustable * Middle seat with seatbelt * Anti-lock braking system (ABS) * Traction control system (ASR) * Armrests on both doors * Additional fog lights * Hour counter * Speed limiter 100 km/h * Front and rear stabilizers * Headrests for driver and two passengers * Electrically adjustable driver’s side mirror * Wide-angle mirror right * Kerb mirror right * Electric windows left and right * 4-wheel parking brake * Rear axle wheel chains * Disc brakes front and rear * Heavy-duty batteries (2x new) * Tires: 285/70 R 19.5 Goodyear, almost new, 13 mm tread depth all around * Reversing camera with additional monitor * 2x spare wheels Turntable ladder superstructure features: * Superstructure: Metz DLK 23-12 L32 CAN turntable ladder with rescue cage (rescue height approx. 30.75 m), max. outreach angle: 75 degrees, max. basket load: 270kg, nominal rescue height: 23m, nominal outreach: 12m, outriggers: horizontally/vertically adjustable, support width variable between 2,400mm and 4,500mm * Special signal system * Front flashers * Original Martin horn system * Stretcher mounting for DIN stretcher, incl. conversion for scoop stretcher, load capacity up to 150 kg * Swivel water monitor * Fixed power supply line to rescue cage with 2 Schuko sockets in the cage * Fixed water line on boom upper section with valve and B-Storz couplings, connecting hose * 1 high equipment compartment behind driver's cab * 3 anchor points in the rescue cage for crew safety * Lifting eye on the base ladder, rated up to 4,000kg * LED scene lighting on chassis * Platform on turntable for DIN generator * 2 adjustable floodlights at end of base ladder, operated from main control desk * Full service history, annually maintained When selling the turntable ladder, we perform the following new works: - General inspection (MOT), emissions and safety check new - Complete service and oil change new - 20-year inspection on ladder superstructure including hydraulic hose replacement and hydraulic oil filter changed, valid until 05/2034 - Safety inspection as per GUV-G 9102 new at delivery/handover ----Immediately deployable vehicle, well-maintained inside and out! Non-smoker vehicle! Your contact for this vehicle: ---- Daniel Seidler Tel: Mobile: (also WhatsApp) Email: Subject to change, prior sale and errors excepted!

Condition: ready for operation (used), Bosch Rho 3.0 CAN/S control unit 1070075708-205, Serial No. 001773283, used, normal signs of wear, 100% functional, scope of delivery as per photos Ksdpfx Aoi D Ucisb Towu

Condition: like new (used), CHARACTERISTICS: Steam injection. Straight infeed conveyor with feeding auger. Kwjdex S I A Repfx Ab Teu 3 seaming heads with first and second operation rollers. Motorised plates. Safety cabin. Electric panel with speed variation. Motorised seaming head height. Closing head lubricated by oil. Automatic lid feeder. No can, no lid system. Safety detectors. Production will depend on the format and product to be closed.

Condition: used, Year of construction: 1983, total width: 750 mm, total height: 900 mm, total length: 2,400 mm, Empty weight: 500 kg Ksdpfjxalyyex Ab Towu - Year: 1983 - Documentation available: No - CE certificate present: No - Transport dimensions: 2400mm x 750mm x 900mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2024, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW * Piston shafts will be induction-hardened and chrome-plated. * The pressing box will be HARDOX plates. * Pumps and valves used in the hydraulic system will be MARZOCCI brand. Kwjdpfxjdfc Uns Ab Teu * The hydraulic valve control lever unit will be SALAMI or VALVOIL brand. * There will be automatic Oil Cooling/Heating Systems. * There will be an oil temperature control screen on the electric panel and an oil level control on the hydraulic oil tank. * The machine will be manually operated. * All electric-electronic material will be from the SCHNEIDER or SIEMENS brand. * Machine will be under AYMAS Makina San. ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or 2.500 working hours whichever comes first. * The machine is CE and EAC certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size: 600mm x 400mm x ... Container Dimension (Width x Length x Height ): 620mm x 1.300mm x 620mm Capacity:

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Kjdpfx Asd Iya Nob Tewu Bale Size 400mm x 400mm x... Bale Weight 100-180 kg (Steel), 40-100 kg (Aluminium),120-180 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.600mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.500mm x 2.200mm x 650mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under Aymas Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 120-180 kg (Steel), 50-80 kg (Aluminium),150-200 kg (Copper) Kwedpfsdfcqaox Ab Tsu Press Box Dimensions (Width x Length x Height): 1.000mm x 2.700mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.650mm x 2.300mm x 800mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Bale Size: 400mm x 400mm x... 2. Container Dimensions (Width x Length x Height): 1.000mm x 2.000mm x 800mm 3. Capacity: 4 tons/hour (Steel), 5 tons/hour (Copper), 2 tons/hour (Aluminium) Kwjdpfx Abodfc Iyj Teu 4. Cycle Time: 90 seconds ( Idle ) 5. Top Cover Cylinder Thrust: 90 tons 6. Preliminary Compression Cylinder Thrust: 150 tons 7. Main Compression Ram Thrust: 210 tons 8. Maximum Working Pressure: 300 bars 9. Electric Motor: 37 kW 10. Machine Dimensions (Width x Length x Height): 3.400 mm x 6.800 mm x 3.000 mm 11. Machine Weight: 18.000 kg 12. There will be an ejection door. 13. Repairable and four-edge-usable blades. 14. Container walls will be covered with HARDOX 450 - 500 material. 15. There will be an automatic SKF liquid lubrication system integrated into the compression chamber. 16. There will be an automatic SKF greasing system that will grease the bushings. 17. Piston shafts will be induction-hardened and chrome-plated. 18. Pumps and valves used in the hydraulic system will be by PARKER or EATON VICKERS & KAWASAKI brand. 19. Bypass filter will be added to the hydraulic system. 20. There will be an AKG Hydraulic Oil Cooling System. 21. All electrical parts will be SIEMENS or SCHNEIDER Brand. 22. The machine will be fully automatic with PLC control, PLC brand and model will be SIEMENS. There will be a touch screen SIEMENS HMI Simatic Panel with emergency buttons placed on some important points. 23. There will be blades from 2767 material (hardness 55HRC) at the borders of the top cover and the sides of the scrap chamber. 24. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for 1 year or 2.500 working hours whichever comes first against manufacturing defects.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Bale Size: 500mm x 500mm x... 2. Container Dimensions (Width x Length x Height): 2.000mm x 2.500mm x 1.100mm 3. Capacity: 15-20 tons/hour (steel) 4. Cycle Time: 90 seconds ( Idle ) 5. Top Cover Cylinder Thrust: 90 tons 6. Preliminary Compression Cylinder Thrust: 150 tons 7. Main Compression Ram Thrust: 300 tons 8. Maximum Working Pressure: 300 bars 9. Electric Motor: 2 x 75 kW = 150 kW 10. Machine Dimensions (Width x Length x Height): 10.000 mm x 10.000 mm x 4.000 mm 11. Machine Weight: 55.000 kg 12. There will be an ejection door. 13. Repairable and four-edge-usable blades. 14. Container walls will be covered with HARDOX 450 - 500 material. 15. There will be an automatic SKF liquid lubrication system integrated into the compression chamber. 16. There will be an automatic SKF greasing system that will grease the bushings. 17. Piston shafts will be induction-hardened and chrome-plated. 18. Pumps and valves used in the hydraulic system will be by PARKER or EATON VICKERS & KAWASAKI brand. 19. Bypass filter will be added to the hydraulic system. Kwsdpogwa T Rsfx Ab Tsu 20. There will be an AKG Hydraulic Oil Cooling System. 21. All electrical parts will be SIEMENS or SCHNEIDER Brand. 22. The machine will be fully automatic with PLC control, PLC brand and model will be SIEMENS. There will be a touch screen SIEMENS HMI Simatic Panel with emergency buttons placed on some important points. 23. There will be blades from 2767 material (hardness 55HRC) at the borders of the top cover and the sides of the scrap chamber. 24. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for 1 year or 2.500 working hours whichever comes first against manufacturing defects.

Condition: new, Year of construction: 2025, IMPORTANT: MACHINE WILL BE BRAND NEW * The cutting guillotine is made of cast steel and is more resistant to fracture, buckling, and abrasion. * Cast steel cutting ram is subjected to a stress-relieving process. * The bolts of the blades on the cutting ram are monitored by the automation system and they are constantly kept tight by the hydraulic tightening system. Fracture and wear of the blades are minimized with this system, and 5 tons of force is applied to each bolt of the blades. * A hydraulic clamping system is used on both the moving and fixed parts of the blades. * Friction surfaces are coated with HARDOX 450 & 500 to prevent wear. * The machine has a fully automatic PLC control and a professional remote controller. * All electric-electronic components used are Schneider and Siemens Brands. * Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. SEE THE TECHNICAL DESCRIPTION BELOW: Cutting Force: 700 Tons Side Compression Force: 2x120=240 Tons (each wing) Clamp Compression Force: 120 Tons Pusher Ram Force: 120 Tons Electric Motor: 180 kW Machine Weight: 70.000 kg Cutting Width: 800 mm Box & Bale Size: 800 mm x 600 mm Kwjdpfx Asdd Tp Reb Tsu Box Length: 6.000 mm Box Width Opening: 350 mm Capacity: < 10 - 15 ton/h (Cutting Capacity), 15 - 20 ton/h (Baling Capacity)

Year of construction: 2020, condition: new, Counter-pressure can filling machine Eurostar Canfill 6 One Filling capacity: 2000 cans/h with 0.33 liter cans 1500 cans/h for 0.50 liter cans Kodpfeq H Azlex Ab Tswu Sleek and standard cans can be filled and sealed with the same lid (type 202).

Condition: good (used), Year of construction: 2011, operating hours: 20,580 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, input current: 59 A, overall weight: 12,000 kg, transport height: 2,750 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), transport width: 2,300 mm, transport length: 8,500 mm, tank capacity: 300 l, Good day, We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer HSM Type VK 4812 Year of manufacture 2011 Operating hours 20,580 hours Main press force 48 tonnes Kwodst H Rcaspfx Ab Tju Drive power 30 kW Machine weight press 12 tonnes The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: reconditioned (used), Year of construction: 2005, operating hours: 15,604 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, total width: 1,700 mm, total height: 2,400 mm, total length: 7,800 mm, input voltage: 400 V, input current: 64 A, overall weight: 12,500 kg, transport height: 2,400 mm, power: 30 kW (40.79 HP), year of last overhaul: 2024, volume flow: 160 m³/h, transport width: 1,700 mm, transport length: 7,800 mm, tank capacity: 600 l, Hello, Ksdpfx Abeuan Hzs Tswu We are offering you a used baler from the manufacturer Presto GmbH & Co. KG, type HPK 50 B, subject to change. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer Presto GmbH & Co. KG Type HPK 50 B Year of manufacture 2005 Pressing force of main press 50 t Drive power 30 kW Total connected load 31.5 kW Rated current 64 A Throughput under operating conditions with a bulk weight of 60 kg/cbm approx. 6.7 t/hour Machine weight of press 12.5 t Note: The machine is currently in our workshop for overhaul and is expected to be tested and ready for sale in February. The machine documentation is available in German. A viewing of the press is possible by appointment in our workshop. We would be pleased if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Kwjdevgrh Uopfx Ab Tju Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: reconditioned (used), Year of construction: 2013, operating hours: 18,819 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,085 mm, filling opening length: 2,815 mm, bale length: 1,200 mm, bale width: 100 mm, bale height: 800 mm, bale weight: 400 kg, total width: 3,140 mm, total height: 2,900 mm, total length: 8,840 mm, overall weight: 7,380 kg, transport height: 2,900 mm, power: 9 kW (12.24 HP), year of last overhaul: 2023, transport width: 2,400 mm, transport length: 5,650 mm, Good day, We hereby offer you a used baler from the manufacturer Strautmann, type BaleTainer. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Strautmann Type BaleTainer Year of construction 2013 Operating hours 18,819 hours Number of bales pressed 7,019 pieces Pressing force main press 60 tonnes Drive power 9.2 kW Machine weight press 7.38 tonnes The baler was partially overhauled. The piston rods and seal sets of the two main hydraulic cylinders were replaced and general maintenance work such as oil and filter changes etc. was carried out. Finally, after the overhaul work, the machine was tested. The press is equipped with a hydraulic tilting device for loading in order to empty lattice box containers on a truck ramp. For example, the machine can be positioned with the tilting device on a truck ramp. There, the employees can roll the material to the tipping device with a mesh trolley and then have it tipped hydraulically into the baler. The machine can also be loaded from the side via the large feed/storage container using a forklift truck or wheel loader. Conveyor belt loading would certainly also be feasible. Kedpfx Ajt H Rgfeb Tjwu The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Kedpfx Abev T I Evj Tewu Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: SPD 18 SELE, tank capacity: 18,000 l, overall weight: 6,765 kg, pressure (max.): 200 bar, power: 5.5 kW (7.48 HP), input frequency: 400 Hz, Gebruikte Husmann afvalperscontainer, Pers is te transporteren als haakarm container Inhoud 18M3, bouwjaar 2009. operationele druk 200 bar met een 5,5 KWh motor. Kwjdpfx Abjx N Elws Tou Transport in Nederland een optie tegen meerwaarde. eventueel een 2e afvalperscontainer ook te koop

Condition: ready for operation (used), Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Kedpfxjx D U N Sj Ab Tswu Model: HL 4010 Year of manufacture: 2012

Condition: used, functionality: unexamined, Ferwood code: RU0002880 - Manufacturer code: 2-083-01-5095 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Kwedpfx Abowtf N Do Tsu

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of VAT, ex works, and without packaging. The press has been cleaned, function-tested, repaired, and equipped with a new control system according to EN16500. All spare parts used are original parts from Strautmann. Technical details: Manufacturer: Strautmann Umwelttechnik Model: PP 1207 Kwsdpou Aa Tnsfx Ab Tou Bale size (LxWxH): 1180 x 700 x 800 mm External dimensions (LxWxH): 1838 x 1059 x 2871 mm Transport height: 2050 mm Feed opening: 1190 x 400 mm Pressing force: 59 t / 580 kN Throughput: 1 - 2 bales / hour Number of strapping channels: 4 Weight of the press: 2,300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation site: indoor / covered outdoor Includes starter set of bale strapping, 19 mm Year of manufacture: 2004

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The indicated price is exclusive of statutory VAT, ex works, and without packaging. The press has been cleaned, function-tested, repaired, and fitted with a new control system in accordance with EN16500. All replacement parts used are genuine Strautmann original parts. Technical specifications: - Manufacturer: Strautmann Umwelttechnik - Model: PP 1207 - Bale size (LxWxH): 1180 x 700 x 800 mm - External dimensions (LxWxH): 1838 x 1059 x 2871 mm - Transport height: 2050 mm - Feed opening: 1190 x 600 mm - Pressing force: 59 t / 580 kN - Throughput: 1 - 2 bales per hour - Number of strapping channels: 4 - Press weight: 2,300 kg - Power supply: 400 V / 50 Hz - Power consumption: 4 kW - Installation location: indoors / outdoors under cover - Including start set of 19 mm baling tape - Serial number: 610.01.588 - Year of manufacture: 2005 Kwodpfx Abov Rzwmo Tju

Condition: ready for operation (used), functionality: fully functional, Press line for manufacturing can ends (tops and/or bottoms) Comprising: Kwjdpfex Ezuyjx Ab Tsu - Bliss 1831 double die press - Bliss double curler - IMC / Grace compound liner - Drying oven - Production capacity: up to 600 ends per minute

Condition: ready for operation (used), Can filling machine diameter 77 mm and 99 mm. VEMAG type FKF for filling in cans. Note: The byer will another machine- same as the offered for spare parts. Kwjdpfxoimblqj Ab Tou

Condition: new, Year of construction: 2023, functionality: fully functional, High-Barrier Film: Premium film from a German quality manufacturer – no imported goods! Ideal for producers, co-packers, and fillers with the highest demands for aroma protection and machinability. Product Details: Product type: High-barrier flat film featuring EVOH aroma protection Aroma barrier: Extremely strong – suitable even for citrus aromas Colour: Transparent Roll width: 260 mm Film thickness: 62 µm Core diameter: 76 mm Roll length: 1,000 linear meters Manufacturer: Kaiser Verpackung GmbH Applications: For food products (e.g. spices, tea, snacks, coffee pads); for cosmetics & non-food items; compatible with virtually all form, fill and seal machines; suitable for aroma-sensitive products. Availability & Tiered Pricing (1,000 linear meters/roll): Price per 1,000 lfm (1 roll): 5 rolls – €140/roll 10 rolls – €135/roll 30 rolls – €130/roll 60 rolls – €125/roll 120 rolls – €120/roll Stock: 120,000 lfm Location: Greven Shipping via freight forwarding or collection by arrangement Quick and cost-effective – below current market price. Perfect for your ongoing production! ----- Cardboard Boxes – Remaining Stock Dimensions: 374x374x166 mm 3C450g/m2 (super sturdy!) 5,000 units Price: €0.30 per box when purchasing 5,000 units, smaller quantities available upon request We also offer matching jars for sale; each carton fits 32 pieces of 400 ml jars: ----- Kedpex A S A Hefx Ab Tjwu PET Jars from German brand manufacturer OBECK: Material: PET (Polyethylene terephthalate) Colour: White Volume: 400 ml Diameter: 93 mm (SP400) Height: 81 mm Weight: 36 g Suitable for food & recyclable Matching PP Lids: Type: Screw cap (Smooth 89SP400) Material: PP (Polypropylene) Colour: Black Height: 14 mm Applications: Food packaging (spices, nuts, protein powder); cosmetic products (creams, lotions, masks); dietary supplements (capsules, powders); industrial use (chemicals, paints, adhesives) Prices (per jar and lid set): 2,880 pcs – €0.35 each 5,760 pcs – €0.32 each 11,520 pcs – €0.30 each 20,160 pcs – €0.26 each 48,960 pcs – €0.22 each 100,800 pcs – €0.20 each 400,320 pcs – €0.18 each Minimum order: 2,880 pcs (2 pallets) Stock location: Greven Shipping: Freight forwarding or collection (by arrangement) Quick sale – We need storage space and are significantly cheaper than the manufacturer. Secure below-market deals now! If interested or if you have any questions, please get in touch!

Condition: used, mileage: 91,498 km, power: 206 kW (280.08 HP), first registration: 12/2006, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2026, brakes: retarder, color: red, gearing type: automatic, emission class: euro4, total width: 2,500 mm, total height: 3,240 mm, Year of construction: 2006, Equipment: ABS, air conditioning, compressor, MAN LE 15.280 with METZ Turntable Ladder DLK 23-12 L32 CAN Automotiv in immediate operational condition ----Chassis Equipment: * Air conditioning * Leaf spring suspension front/rear * Wheelbase 4575 mm * Permissible gross weight: 15 t * Automatic transmission ZF 5 HP 590 with retarder * 125L fuel tank right side * Adjustable steering wheel * Axle ratio i = 4.62 * Differential lock on rear axle * Medium-length cab * Driver’s comfort seat with lumbar support - GRAMMER brand * Passenger seat GRAMMER brand * Firefighting exhaust tailpipe * Quick-start system * Anti-lock braking system (ABS) * Traction control system * Disc brakes on front axle * Armrests on both doors * Additional high beam and fog lights * Hour meter * Cruise control * MAN CD radio 24V * Front and rear stabilizers * Headrests for driver and passenger * Cab rear wall with 2 narrow windows, left and right * Heated, electrically adjustable rearview mirrors * Heated wide-angle mirrors left and right * Heated and electrically adjustable kerb mirror right * Electric windows left and right * 4-wheel parking brake * Automatic snow chains on rear axle * Continental Scandinavia winter tires Superstructure/Turntable Ladder Equipment: * Superstructure: Metz Turntable Ladder DLK 23-12 L32 CAN with rescue cage (rescue height approx. 30.75 m). Maximum elevation angle: 75°, maximum cage loading: 270 kg, rated rescue height: 23 m, rated outreach: 12 m, stabilizers: horizontal/vertical, variable support width between 2,400 mm and 4,500 mm * LED floodlights on ladder set for wide-area illumination * Special signaling system * Front flashers * Original Martin horn system (4 horns) * Stretcher storage for standard DIN stretcher including modification for basket stretcher, load capacity up to 150 kg * Permanently installed 230V power supply up to the rescue cage, 2 Schuko sockets in the rescue cage * Permanently installed water conduit on top section of ladder with shut-off valve and B-Storz couplings * 3 anchor points in the rescue cage for securing personnel * Lifting eye on lower ladder rated for up to 4,000 kg * Lifting eye on cage segment (between ladder tip and rescue cage) for attaching an abseiling device, 270 kg / 400 kg payload * LED surround lighting on the subframe * XXL platform on the turntable for storage of DIN generator, ventilation unit, traffic cones, spare canister, basket stretcher, and monitor nozzle * LED light bar on lower ladder, approx. 8,282 lumens * 2 adjustable LED floodlights at the end of the lower ladder, each 2,880 lumens, operable from main control station * LED work lights left and right on the rescue cage, each 1,800 lumens * 2 LED light bars, on swivel arms left and right on rescue cage, each 3,105 lumens (as replacement for 1,000 watt halogen) * Complete service booklet available, all maintenance carried out annually ----Immediately operational vehicle in well-maintained condition both inside and out! Non-smoking vehicle! Contact for this vehicle: ---- Daniel Seidler Tel: Kwjdpfsxafw Sox Ab Teu Mobile: also WhatsApp Email: Specifications subject to change, prior sale, and errors excepted!