Used Castotig 2000 for sale (7,471)

Condition: ready for operation (used), Year of construction: 2016, A fully automatic Hagenauer + Deck carton erector with integrated bottom sealing is available. Capacity: 8cartons/min, discharge height range: 570mm-630mm, discharge direction: left, flap folder type: FT-55-5-5-7-DS, carton width range: 95mm-510mm, carton height range: 85mm-510mm. Without top flap sealer. Documentation available. An on-site inspection is possible. Iedpfezp Rg Dex Afvjtk

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, table width: 850 mm, table length: 2,200 mm, table load: 4,800 kg, spindle speed (min.): 10,000 rpm, distance table to spindle center: 950 mm, Equipment: chip conveyor, documentation/manual, Johnford VMC 2000 vertical machining center, CNC Heidenhain iTNC 530. Itedpfx Ajxdiigsfvsk X-axis – Longitudinal 2,050 mm Y-axis – Transverse 850 mm Z-axis – Vertical 800 mm Spindle-to-table distance 150-950 mm Main spindle to column distance 885 mm Table Surface 2,200x850 mm Maximum weight 4,800 kg Spindle Head Spindle taper - BT-40 (BIG PLUS System) Speed range (2) 10,000 rpm Motor HP 25 Equipped with: - Internal coolant system 20 bar - Part probe - Tool probe - Rigid tapping - Electronic handwheel - 2 longitudinal chip conveyors - Separate tank with filtration unit - Full enclosure

Condition: used, Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 370 mm, turning length: 2,000 mm, turning diameter: 630 mm, spindle bore: 105 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, spindle motor power: 18,500 W, total height: 1,765 mm, total length: 3,700 mm, total width: 2,290 mm, workpiece weight (max.): 600 kg, spindle nose: D1-8, Equipment: documentation/manual, - A 2003 model of a single-slide lathe is for sale. - Complete documentation, including all maintenance reports, is available. - Chip conveyor included. - New cutting tool is available. - VDI documentation is included. - Ready for production. - Available immediately. - SIEMENS 810 control system. - Self-centering steady rest. Ijdpfx Afszqzx Hjvetk

Condition: good (used), functionality: fully functional, Year of construction: 2007, Used 2-meter swivel bending machine from Schroder Itedszgtmzopfx Afvok Type: MAKV Capacity: 2050 x 2.0 mm POS 200 control system Year of manufacture: 2007

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Controller: Fanuc 18i-TB Max turning diameter: 330 mm Max turning length: 510 mm Max diameter above bed: 330 mm Spindle power: 11 kW – 4000 rpm Number of turrets: 1 Number of tools: 12 Live tooling: Spindle speed range: 45–4500 rpm Y-axis travel: Typically around ±50 mm Live tool spindle power: 5.5 kW Iedpfxox Ryrhj Afvjtk Machine weight: 4,750 kg.

Condition: good (used), Year of construction: 2017, load capacity: 2,000 kg, total height: 1,300 mm, total length: 2,000 mm, total width: 1,300 mm, table width: 1,200 mm, rotary table diameter: 1,200 mm, overall weight: 1,300 kg, table load: 2,000 kg, SWP PTA 2000 Welding Positioner / Manipulator Table Ø: 1200mm Table load on 400 mm:2000 Rotation table: 270° Table rotation: 0,13 - 2,6U/mm Table load:: 2000 Length: 2000mm Width: 1300mm Height: 1300mm Weight: 1300kg Isdpezd T Tpefx Afvetk Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2000, VENJAKOB HGS-Z/H Surface Coating Machine / Painting System Manufacturer: VENJAKOB Type: HGS-Z/H Year of Manufacture: 2000 Machine Type: Automatic surface coating machine / Spray painting system for all 5 sides Surface coating machine with 4 spray heads for water-based paints, solvents, and stains Design: Automatic surface coating machine Itjdpfx Afjzvaz Djvjk Process: Spray painting / Surface coating Workpiece transport: Continuous operation Compressed air connection: approx. 6 bar Application area: Wood and wood-based components Control system: VENJAKOB control system Paint application: Spray application Design: Industrial continuous system Machine dimensions: 4450 x 3170 x 2520 mm Passage width: 1300 mm Working height: 920-960 mm Passage height: 200 mm Rubber conveyor belt with paint recovery and belt cleaning

Year of construction: 1998, condition: used, functionality: fully functional, Grinding master 2000 Itedpezlubdofx Afvsk This is A polishing machine with a 900mm wide table. It has the capability of polishing stainless steel from a hot rolled finish up to a highly polished finish. A wide range of polishing belts are available for this machine, ranging from 60 grit to 400 grit and for a wide range of materials. It comes complete with an air filtration system, that extracts the polishing dust and particles through a water trough. that captures the dust and particles. The clean filtered air is exhausted back into the building. This means that the Grindingmaster can be located in any position in a building without the need for outside venting. This system also comes with a customised racking system for the safe storage and easy access to the polishing belts. It also comes complete with a Surface Measuring Device, which can accurately measure and verify the desired surface finish.

Condition: used, Year of construction: 2014, x-travel 2000 mm y-travel 630 mm z-travel 550 mm Control Siemens 840 D total power requirement 7,5 - 22,5 kW weight of the machine ca. 10,5 t Maximum table load:1,000 kg / m table length Movement range: Ijdpfxeyan Rcs Afvetk X-axis:2000 mm Y-axis:630 mm Z-axis:550 mm Speed range up to:12,000 min-1 Maximum speed range:140 Nm Drilling power:average 42 mm (with insert drill) Milling power:600 cm³/min Tool places:24 Tool shaft:HSK A 63 DIN 69893 Tool average:max. 75 mm Tool average with: free neighbouring places:max. 160 mm Tool length:max. 320 mm Tool weight:max. 8 kg (max. magazine load 100 kg Tool change time:approx. 1.5 s (depending on control

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, REF: MM6379 Damak conical rounder, used in bread and roll production to shape divided dough pieces into smooth, round balls ahead of proving. Handles pieces from 100g to 600g. Itjdpjy Aidksfx Afvek Manufacturer - Damak Makina Model - DM CR 2000 Date of manufacture - 2021 Piece weight - 100g to 600g Capacity - 1,200 to 2,400 pieces/hour Electrical - 415 V / 50 Hz / 3 phase

Condition: reconditioned (used), Year of construction: 2017, operating hours: 12,270 h, functionality: fully functional, turning diameter: 150 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 220 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, overall weight: 5,700 kg, spindle nose: JIS A2-5, input voltage: 400 V, number of driven tool stations in tool turret 1: 10, number of tool stations in tool turret 2: 10, CNC Lathe DMG MORI NRX2000 MC TECHNICAL CHARACTERISTICS: Year of manufacturing: 2017 CNC control: MITSUBISHI M730UM Max. turning diameter: 150 [mm] Stroke X axis: 100 [mm] Stroke Z axis: 220 [mm] Rapid traverse rate X1 axis: 30000 [mm/min] Rapid traverse rate X2 axis: 30000 [mm/min] Rapid traverse rate Z1 axis: 30000 [mm/min] Rapid traverse rate Z2 axis: 30000 [mm/min] Spindle nose: JIS A2-5 Max. machining length spindle 1: 100 [mm] Max. machining length spindle 2: 100 [mm] Max. spindle speed - Spindle 1: 6000 [rpm] Max. spindle speed - Spindle 2: 6000 [rpm] Live tools power - Turret 1: 1.5 [kW] Live tools power - Turret 2: 1.2 [kW] Number of tool stations - Turret 1: 10 Max. speed driven tools - Turret 1: 10000 [rpm] Number of tool stations - Turret 2: 10 Max. speed driven tools - Turret 2: 10000 [rpm] Total power required: 38 [kVA] Supply voltage: 400 [V] Working hours: 12270 [h] Weight: 5700 [Kg] INCLUDED EQUIPMENT: x1 gantry loader x2 workstockers (left + right) for raw materials and finished workpieces x1 RENISHAW workpiece touch probe, type RLP40 (NEW) x1 drill bit breakage detection sensor (for turret N°1) x19 static tool holders x4 axial driven tool holders Itjdpfx Afeyzgc Ujvok x2 KITAGAWA collet chucks, type KLAMP DKF65 x2 three-jaw chucks x1 status indicator lamp x1 coolant gun x2 remote electronic handwheels (Jogwheels) x1 oil mist extraction unit x1 chip conveyor x1 high-pressure coolant unit, 35 [bar] x1 SIEBEC cutting fluid filtration unit type MP52D-AP18 x1 set of grippers for the gantry loader x1 set of axle clamping brackets for machine transport x1 complete set of manuals (users manual, programming manual, electrical diagrams, gantry loader manual...) Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine tool similar to a mill-turn center, machining center, and milling machine, and to brands such as Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG, Mazak. CNC lathe, NC lathe, digital lathe, machining center, NC milling machine, CNC milling machine, digital milling machine, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Condition: like new (used), Year of construction: 2020, operating hours: 8,344 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, Stock number: 503618 Manufacturer: ARBURG Itodpfxezfkflo Afvok Type: Allrounder 2000 T 2000-800 Control: Selogica direct Year of manufacture: 2020 Operating hours: 8344 h Technical data, clamping unit Clamping force: 2000 kN Platen size h x v: 1772 x 800 mm Minimum mold height: 400 mm Maximum platen distance: 900 mm Opening stroke: 500 mm Rotary table size D: 2000 mm Ejector stroke: 175 mm Ejector force: 45 kN Mold weight: 6000 kg Technical data, injection unit Screw diameter: 50 mm Injection volume: 392 ccm Injection pressure: 2000 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 60 rpm Screw torque: 880 N Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & Weight Machine dimensions L x W x H: 4.11m x 2.65m x 4.81m Total weight: 22000KG Equipment Screen text in German Screen text in English CEE socket 16A Hydraulic core pull, 4x Air valve 1x Machine with rotary table Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 Handling interface EUROMAP 73 interface OPC interface

Condition: excellent (used), Year of construction: 2015, operating hours: 29,500 h, functionality: fully functional, machine/vehicle number: 231000, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 570 mm, displacement volume: 474 cm³, injection pressure: 2,000 bar, injection weight: 434 g, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here, as a dealer in injection molding machines, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines from the current model year 2010 onwards. We have been a wholesaler of used injection molding machines for over 25 years. Due to recent developments - tax information and advantage for the used machine: From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% annually. Iodpfx Asw Tt R Iefvjtk Manufacturer: Arburg Type: 570C 2000-800 GE Serial number: to be provided Year of manufacture: 2015 Operating hours: approx. 29,500 h Machine number: 231000 Control system: Selogica Dimensions L/W/H: 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Operational status: fully functional Condition: very well maintained - German origin - from first owner Extras: 2 x core pull units Thermoplastic cylinder, complete, 55 mm, highly wear-resistant Thermoplastic processing Open nozzle 55mm Clamping plate set 570 central 125 mm Selection unit - extended graphics - extended tool protection - extended travel movements - extended clamping - production control - job change Complete documentation - electrical diagrams, etc. Injection unit Screw diameter: 55 mm Injection weight: 434 gr./PS Injection pressure: 1650 bar Injection volume: 474 ccm Clamping unit Clamping force: 200 tons / 2000 kN Tie bar distance: 570 x 570 mm Clamping plates: 795 x 795 mm Tool installation height: 300 mm Max. distance between plates: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connection value: 45 kW Visible peripheral devices are not included in the scope of delivery. The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Warranty Warranty until the first commissioning Loading/shipping Free loading onto the buyer's truck or free delivery to the buyer's premises against reimbursement of freight costs - worldwide delivery possible Available from our warehouse in Hanover/Germany For information about the machines we offer and our company: - We only sell our own machines purchased from ongoing production from our warehouse in Hanover. - All offered machines are inspected and tested before dismantling. - We do not sell insolvency goods. - We are not an intermediary dealing with third-party property. - All offered machines come from successful companies for which maintenance and care are a matter of course. - All offered machines can be viewed in our warehouse.

Condition: used, mileage: 412,765 km, power: 162 kW (220.26 HP), first registration: 07/2005, fuel type: diesel, overall weight: 11,900 kg, axle configuration: 2 axles, color: yellow, gearing type: mechanical, Equipment: ABS, air conditioning, MAN L 2000 horse transport / 5 horses / living area / 220 hp The body is only 4 years old! Vehicle data: First registration: 07.07.2005 * Mileage: 412,765 km * Power: 162 kW / 220 hp * Engine displacement: 6,871 cm³ * Fuel: Diesel * Emission class: Euro 3 * Transmission: Manual transmission * Seats: 5 * MAN L 2000 * Registered as a special-purpose vehicle (motorhome) over 2.8 t ----Horse compartment: Space for up to 5 horses * Spacious horse compartment * Adjustable partitions Isdpfx Aozu Uc Hjfvotk * Padded dividers * Rear ramp for easy loading and unloading * Roof hatch * Several windows with protective grilles * Ventilation options * Various storage and stowage options ----Living/recreation area: Separate living/recreation area * TV * Radio * Wood paneling * Seating * Cabinets and storage compartments * Control panel for onboard electrical system and utilities * Heating * Numerous storage options ----Cab / Features MAN L 2000 * 162 kW / 220 hp * 6,871 cm³ diesel engine * Manual transmission * 5 registered seats * Driver and passenger seats * Additional seats * Various storage compartments ----Other Spacious MAN L 2000 horse transporter with space for up to 5 horses and a separate living/recreation area. Thanks to the spacious horse compartment, the rear ramp, the adjustable partitions, and the living area, the vehicle is ideal for competition, sporting, and recreational use. Inspection possible by appointment. Errors, changes, and prior sale are reserved. We are available to answer any further questions you may have.

Condition: used, Year of construction: 1997, cutting length 2000 mm sheet thickness - max. 6 mm operating pressure 250 bar Itjdpfxeztfv Us Afvjk fabric-no. S2669 weight of the machine ca. 4,7 t working width 2059 mm

Year of construction: 2010, condition: ready for operation (used), Three similar Arburg injection molding machines are available. 1) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2010, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 91917h, weight: approx. 9800kg. 2) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 82736h, weight: approx. 9800kg. 3) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 90722h, weight: approx. 9800kg. Documentation available. An on-site inspection is possible. Ijdpfeznx Hisx Afvjtk

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 12/2012, total length: 10,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,060 mm, color: green, Year of construction: 2012, Equipment: tail-lift, Axle configuration Tyre size: 275 / 70 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Weights Empty weight: 6.880 kg Carrying capacity: 15.120 kg GVW: 22.000 kg Functional Tail lift: Dhollandia DHLSU.40, tail lift, 2000 kg Maintenance, history and condition Number of owners: 1 Itodpfx Aezvdz Iefvok Technical condition: average Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, turning length: 291 mm, turning diameter: 270 mm, Like new condition; has not yet been used in production. Control system: CNC path control SIEMENS SINUMERIK 828 D TECHNICAL DATA Main spindle Turning diameter: 270 mm Turning length: 291 mm Chuck diameter: 210 mm Spindle bore: 76 mm Drive power max.: 10.5/20.0 kW C-axis (resolution): 0.001° Speed range up to: 45-4,500 rpm Turret (tool holder) Number of stations: 12 Of these, driven: 12 Speed of driven tools: 5,000 rpm Tool holder: BMT 45 X-axis: 175 mm Z-axis: 350 mm Tailstock Tailstock quill diameter: 65 mm Tailstock quill stroke: 80 mm Itjdjyrd Uhepfx Afvek EQUIPMENT/ACCESSORIES  Hollow cylinder for main spindle  C-axis for main spindle  Tailstock  Drive unit for turret  Coolant system  IKZ = internal coolant supply, 10 bar  Chip conveyor  Flush gun  Parts catcher  3-jaw chuck SAMCHULLY MH-208 BVI, max. diameter 210 mm, incl. set of jaws  Documentation

Year of construction: 2018, condition: good (used), Pallet wrapper, Youngsunpack – used: Price ex works: only €3,950 (net)! Unit 1 Manufacturer: Youngsunpack Type: MH-FG 2000 B Year of manufacture: 2018 Serial number: e.g., 181010PW4- Pre-stretch system with a stretch rate of 250% Machine weight: 750 kg Available programs: Single wrapping, wrapping up and down, single wrapping with top sheet, wrapping up and down with top sheet, manual Film carriage output: Fixed pre-stretch of 250%. Maximum load: 2000 kg Maximum pallet dimensions: 1200 x 1200 mm Diameter of the wrapping surface: 1650 mm Maximum wrapping height: 2400 mm Column height: approx. 2.75 m 220 V, 1 phase, 1,250 W Condition: good Available: from approx. Q4/2026 Location: Hamburg Itsdozbymlopfx Afvjk

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, Hebrock EURO 2000 Edge Banding Machine – fully overhauled, ready for immediate use For sale is a highly reliable and robust edge banding machine manufactured in Germany. The machine has been technically refurbished and is immediately operational – ideal for joineries looking for a solid solution without investing in new equipment. Radius and chamfer adjustment pneumatic. The machine can be tested on site. Condition / Work carried out: - All pneumatic hoses replaced - 2 main cylinders new - Machine thoroughly cleaned - Technically inspected and ready for operation Technical specifications: - Manufacturer: Hebrock GmbH (Made in Germany) - Model: EURO 2000 - Year of manufacture: 2001 - Voltage: 230 / 400 V - Frequency: 50 Hz - Power: 7 kW - Rated current: 13.6 A Working range: - Workpiece thickness: approx. 10 – 50 mm - Edge thickness: approx. 0.5 – 3 mm - Minimum workpiece length: approx. 250 mm - Minimum workpiece width: approx. 70 mm - Feed speed: approx. 10 m/min - Compressed air connection required (approx. 6–7 bar) Ijdpfxoy Nd H Hj Afvotk Delivery within a 150 km radius available for an additional charge. As we are currently receiving new machines and storage space is limited, we have adjusted the price.

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Iedpfx Aszd Uv Eofvjtk Sliding guard for operator protection CE safety equipment

Condition: used, Year of construction: 1998, operating hours: 75,336 h, functionality: fully functional, machine/vehicle number: T62204, Equipment: documentation/manual, TECHNICAL DETAILS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 mm - Max. machining length: 200 mm - Spindle speeds: 10,000 rpm - C axis indexing precision: 0.1° COUNTER SPINDLE - Max. bar diameter: 20 mm - Spindle speeds: 10,000 rpm - Spindle power: 3.7 kW - C axis indexing precision: 0.1° - Number of guide bush holders: 2 GUIDE BUSH HOLDER 1 - Number of positions: 5 GUIDE BUSH HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Live tooling speed: 8,000 rpm END ATTACHMENT - Number of positions: 4 - Number of driven positions: 4 - Live tooling speed: 6,000 rpm SECONDARY OPERATION Iedpfjw Stndjx Afvjtk - Number of positions: 7 - Number of driven positions: 3 - Live tooling speed: 8,000 rpm POWER SUPPLY - Supply voltage: 400 V - Total installed power: 14 kW WEIGHT & DIMENSIONS - Machine footprint: 2,270 x 1,650 mm - Machine height: 2,200 mm - Machine weight: 3,500 kg EQUIPMENT - CNC: Fanuc - Driven tool motor at: S2, S3, S5 vertical/horizontal - Rotating guide bush - Parts catcher - Workpiece ejection - Coolant tank - Bar loader: ROBOBAR SSF

Year of construction: 2025, condition: ready for operation (used), A like-new dosing machine Gabler, manufactured by Volkmann and used only once for testing purposes, is available. Screw conveyor: 10m, Conveying height: 3m, Conveying capacity: 600kg/h, Bulk density: 0.6-0.7kg/l, Particle geometry: Powder, Min. particle size: 5µm, Product feeding station: RNT180, Vacuum conveyor: PPC250VS, Product feeding: Bag emptying, Filling volume vacuum conveyor/product feeding station: 17l/400l. Machine dimensions X/Y/Z: approx. 1000mm/750mm/2200mm, Weight: approx. 250kg. Documentation available. An inspection on site is possible. Iedpfxjzidh Us Afvjtk

Condition: like new (used), Year of construction: 2019, load capacity: 1,200 kg, lifting height: 6,500 mm, construction height: 3,000 mm, operating hours: 1,874 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 312 Mast: P + F - 3F6500 ID: 25116.5772 Category: Used Mast: 3F Lowered height: 3000 mm Lifting height: 6500 mm Capacity: 1200 kg / 600 kg Platform height: 6500 mm Order picking height: 8100 mm Cabin width: 1400 mm Year: 2019 Operating hours: 1874 hours Battery: 48 V / 620 Ah Options: - Triplex mast - FFL Itodpfx Afezutltovek - SPECIAL platform!!!! (L x W = 2000 x 1400 mm!!) - Guidance rollers on the safety gates – complete, LIKE NEW!!

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Extraction: 2 x 120 mm at 20 m/s Extraction capacity: m³/h Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Release agent spraying device Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit 2 x 0.3 kW, 12,000 rpm, 200 Hz Scraper blade 2 x carbide scrapers Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding. Itedpfxozuyh Uo Afvjk