Used Centering Microscope for sale (12,595)

Condition: good (used), Year of construction: 2007, Ref. -No.: 10473 Manufacturer: HEDELIUS Type: C60 - 2000 Year of construction: 2007 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Bcsdpeym Ncasfx Ag Isw Country of origin: Germany X-Travel: 2000 mm Y-Travel: 620 mm Z-Travel: 520 mm Table Height: 860 mm Max. Workpiece Weight: 2000 kg Max. Tool Length: 330 mm Max. Tool Diameter: 80/125 mm Clamping Area: 2500 x 600 mm T - groove width: 18 mm T - slot spacing: 100 mm Numbers Of Tools In Magazin: 30 Turning Speed Range - Stepless: 30 - 8000 RPM Max. Torque: 198 Nm Rapid Travel X/Y/Z: 45000 mm / min Number of radial T-slots: 5 Machine length: 5400 mm Machine width: 3300 mm Machine Height: 3000 mm Weight Of The Machine Ca.: 10,5 t Further information: Distance spindle nose - table: 100 - 620 mm Tool clamping: disk spring Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Bsdpjym Nb Ajfx Ag Iscw Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10436 Manufacturer: SCHERER FEINBAU Type: VDZ 120 rechts Year of construction: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany Machine-No.: 660XX Turning Speeds: 5500 RPM Swing Diameter: 260 mm Rapid Travel Speed X-Axis: 60 m / min Rapid Travel Speed Z-Axis: 30 m / min Travel -X Axis: 626 mm Travel -Z Axis: 250 mm Spindle bearing diameter: 32 mm Rated speed: 1200 1 / min Turret places: 12 Pcs Machine length: 1685 mm Machine width: 2400 mm Bodpfxoym Na So Ag Iocw Machine Height: 2850 mm Weight Of The Machine Ca.: 8 t Further information: Spindle head with short taper DIN 55026: A6 Pallet conveyor WPS KNOLL system (2010) SAUTER turret (12 places) Documentation available Tools in the pictures are sold with the machine. Machine can be inspected and demonstrated under power.

Condition: good (used), Year of construction: 2016, Ref. -No.: 10411 Manufacturer: BROTHER Type: Speedio S700X1 Year of construction: 2016 Type of control: CNC Control: BROTHER CNC Storage location: Halberstadt Country of origin: Germany X-Travel: 700 mm Y-Travel: 400 mm Z-Travel: 300 mm Main spindle drive power: 15,4 kW Main spindle speed range: 16 - 16.000 RPM Table surface: 800 x 400 mm Distance Spindle /Table: 180 - 480 mm Table Load: 300 kg Max. Tool Weight: 25 kg Max. Tool Length: 250 mm Max. Tool Diameter: 110 mm Tool change time: 0,8 s Tool Taper: BT 30 Tool Piece Magazine With: 21 Pcs./pcs. Feed Speeds X/Y/Z Axis: 10.000 - 20.000 mm / min Rapid Traverse X-Axis: 50 m / min Rapid Travel Y-Axis: 50 m / min Rapid Traverse Z-Axis: 56 m / min X - axis acceleration: 2,0 G Y - Axis acceleration: 1,3 G Z - axis acceleration: 2,2 G Acceleration time: 0,30 sec Machine length: 2360 mm Machine width: 2120 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 2,4 t Further information: THREAD Speed: 6,000 rpm Bcjdpfx Agoym Naxj Iew Acceleration time: 0.11 s CUTTING CAPACITY Drilling capacity in aluminum: max. 24 mm / F0.2 Drilling capacity in C45 steel: max. 18 mm / F0.1 Tapping capacity in aluminum: max. M22 Tapping capacity in C45 steel: max. M14 Milling capacity in aluminum: max. 660 cm³/min. Face milling cutter: Ø 100 / depth 2.2 mm / F=3000 Milling capacity in steel C45: max. 48 cm³/min. Face milling cutter: Ø 40 / depth 2.5 mm / F=484 HIGH-SPEED TOOL CHANGER Stations with directional logic: 21 Change time T - T: 0.8 seconds Changeover time C - C at n=10,000 rpm and XYZ positioning: 1.4 seconds Positioning accuracy: ± 0.006 mm Repeat accuracy: ± 0.004 mm Accuracy of thread depth: 0.05 mm Air consumption: 45 l/min Air pressure: 0.5-0.6 MPa Air quality: 99% anhydrous Including FANUC robot / automation Machine can be inspected under power.

Condition: good (used), Year of construction: 2007, Ref. -No.: 10357 Bcsdpfjym Nafox Ag Isw Manufacturer: STARRAG HECKERT Type: HEC 630 Athletic Year of construction: 2007 Type of control: CNC Steuerung Control: Sinumerik 840D Storage location: Halberstadt Country of origin: Schweiz X-Travel: 1200 mm Y-Travel: 950 mm Z-Travel: 1200 mm Work spindle drive power (25% ED): 67 kW Work spindle torque (25% ED): 1508 Nm Tool Taper: HSK-A100 Workpiece interference circle diameter: 1250 mm Tool Piece Magazine With: 80 Pcs./pcs. Tool changer: Werkzeugkettenmagazin Max. Workpiece height: 1200 mm Feed Speeds X/Y/Z Axis: 60000 mm / min Feed Capacities X/Y/Z: 22/18/22 N Speed range - main spindle: 20 - 6000 RPM Numbers Of Pallets: 2 Max pallet load: 1500 kg Size Of Pallet: 800 x 630 mm pallet change time: 14 s Pallet clamping area (lxw): 800 x 630 mm Weight Of The Machine Ca.: 25 t

Condition: good (used), Year of construction: 2008, Ref. -No.: 10335 Manufacturer: HüLLER HILLE Bedsym I U Uspfx Ag Iocw Type: NBH 170 Year of construction: 2008 Type of control: CNC Control: Sinumerik 840D pl Storage location: Halberstadt Country of origin: Germany X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Distance spindle center - table: 150 mm Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 800 kg Max. Workpiece Weight: 40 kg Max. Tool Length: 650 mm Max. Tool Diameter: 325 mm Workpiece Diameter At Full Load: 100 mm Tool Taper: HSK - 100 Spindle Speed: RPM Rapid Traverse: 60 m / min Machine length: 9500 mm Machine width: 4500 mm Machine Height: 3500 mm Further information: Coolant system = 1250 l

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment. Bjdsym I U Iepfx Ag Iscw

Condition: used, Year of construction: 2003, functionality: fully functional, Mazak Quick Turn Nexus 150/500 YOM 2003 Mazatrol PC Fusion Control Mazak Tool Length Measuring System Serial Number 166285 Main Spindle has been fully refurbished 8 Station Turret Programable Tailstock Parts Catcher Swarf Conveyor RH exit Machine has been fully serviced Complete set of Machine Manuals Bcodpjyplgtefx Ag Iew UK buyers - Price £19,995 + VAT

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Centre Lathe Model Condor B, Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout from Training Workshop Technical Data: Bcodpfx Asym Srqeg Iow >> Year of manufacture: 1991, Machine No.: 91-1624 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.18 to 28 mm >> Spindle brake >> Weight approx. 1100 kg >> Spindle brake engageable >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. 3-jaw chuck with wedge bars and 1 set of jaws >> Tool holder with 7 tool pockets >> Bed stop >> Machine mounts >> Drill chuck >> Live center >> Coolant system About the Machine: Offered here is a used Weiler Condor B lathe, year 1991, in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The Weiler comes from a training workshop and has been very well-maintained. The 3-axis Heidenhain digital readout makes work even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our site.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout from a Training Workshop Technical Data: >> Year of manufacture: 1987 / Machine No.: 87-674 >> Centre height: 165 mm >> Distance between centres: 750 mm >> Spindle speeds: 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread cutting capability: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.18 to 28 mm Bcsdpjym Slwefx Ag Isw >> Spindle brake >> Weight: approx. 1,100 kg >> Switchable spindle brake >> Dimensions (LxHxD): 1.83 m x 1.29 m x 0.88 m Included Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. 3-jaw chuck with one set of jaws (wedge type) >> Quick collet change system with collets from 1–29 mm in 0.5 mm increments >> Toolholder with 7 tool pockets >> Bed stop >> Machine feet >> Drill chuck >> Live centre >> Coolant system About the Machine: Offered here is a used Weiler Condor 81 lathe, year 1987, in very good condition. The machine is, of course, fully functional. It is a very robust and powerful machine. Coming from a training workshop, the Weiler is extremely well maintained. The 3-axis Heidenhain digital readout allows for easier and more precise operation. The machine has been electrically and mechanically inspected by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power on site.

Condition: good (used), Year of construction: 2002, 5-axis CNC machining center Bodpsymw Tgsfx Ag Iecw Manufacturer: AXA Machine Model: VPC 50 U Control: Siemens Year of manufacture: 2002 Number of controlled axes: 5 Gantry design TECHNICAL DATA Travel ranges - X-axis: (mm) 2,300 - Y-axis: (mm) 1,200 - Z-axis: (mm) 700 Spindle: Swiveling spindle - Swivel range (degrees): 90 (0.001) - Speed range (rpm): 30–7,500 Tool magazine - Tool holder: SK50 Machine table - Table size, fixed table L x W: (mm) 1,100 x 1,100 - Diameter of built-in rotary table: (mm) 1,100 x 1,100 Technical data and information subject to change and errors excepted.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Neff The Okuma specialist and NeffBuy Bcjdpfsvta Rkox Ag Ijw We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Bjsvkhv0lno We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: used, Year of construction: 2011, Technical details: travel -x axis: 1000 mm travel -y axis: 500 mm travel -z axis: 610 mm turning speed range: 12000 1/min control: HEIDENHAIN iTNC 530 tool change unit: 40 Pos. Tool bore: SK 40 table-size: 1.200 x 500 mm max. table load: 850 kg total connected load: 37 kW weight: 6,8 to. space requirements approx. LxWxH: 2,65 x 2,1 x 2,9 m vertical machining center, internal coolant supply 20bar, Bsdpjxp Nrljfx Ag Iscw airblast through spindle, direct measuring system, prepared for 3D-touchprobe (M&H PS 25.00), chioconveyor NC-dividing device LEHMANN EA 520 L MA (center height 180mm) approx. 26.000h "machine on", approx. 7.500h "spindle on" *

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Bodpfxoxy Tmne Ag Iecw

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Pass-through height. Operator terminal: 24" LED color display. Handheld terminal for controlling axis speeds. Software: "Woodflash". Vacuum pump 90 m³/h, 50 Hz or 108 m³/h, 60 Hz. Milling spindle 12 kW HSK F63 (12,000 rpm). 12-position linear tool changer on the left side of the machine frame + pickup position. Drilling head DH 16 4H 2S: Vertically 12 spindles, horizontally 4 spindles, 2 grooving saws. Storage location: Supplier. Bodpjxy Tlwsfx Ag Ijcw

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 780 mm, total height: 31,500 mm, Equipment: documentation/manual, rotational speed infinitely variable, Dear customer, we have an Okuma MA 500 HB 6APC in good condition in stock for you. We look forward to your inquiry and remain with best regards, Your Neff - The Okuma Specialist Team Data sheet: Control: OSP P200-M Travel paths X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degrees] 1; 360 degree incrementation Tool changer 200 ATC MAS BT50 Tool positions: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Bcodpfx Asvta Sbeg Isw Pallet station 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Other features: – Renishaw Probe – Renishaw Tool Break Control – Mayfran Concept with high pressure pump Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and Acceptance, loading, transport, assembly and commissioning of the machine as well as instructions and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit our homepage.

Condition: excellent (used), turning diameter over bed 900 mm turning diameter over slide rest 600 mm turning length 3000 mm spindle turning speed range 11,2 - 560 U/min tool holder Multifix D1 total power requirement 22 kW weight of the machine ca. 5,6 t dimensions of the machine ca. 5,6 x 1,8 x 1,7 m Safety-related conversion according to CE standard 2017 2011 new plan pull spindle, lock case partially renewed, lubrication according Bedeym D H Tspfx Ag Iscw to internal plan

Condition: excellent (used), Year of construction: 2011, Winmax control Bcedpfx Agoyncfwe Isw Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Weiler Centre Lathe Model Condor B, Leadscrew and Feed Shaft Lathe with 3-Axis Heidenhain Digital Readout from Training Workshop Technical Data: >> Year of manufacture: 1990, Machine no. 90-1419 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5, with bayonet lock >> Tailstock Morse taper: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Spindle brake >> Weight approx. 1100 kg >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pcs 3-jaw scroll chuck with 1 set of jaws >> Toolpost with 7 tool holders >> Bed stop >> Machine mounts >> Drill chuck >> Live center Bcsdpjym Dczofx Ag Isw >> Coolant system About the machine: Offered here is a used Weiler Condor B lathe, year of manufacture 1990, in very good condition. The machine is of course fully functional. A very sturdy and powerful machine. The Weiler comes from a training workshop and is very well maintained. The 3-axis Heidenhain digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us, and a full oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Condition: good (used), Year of construction: 2006, Winmax control Travel X/Y/Z: 1270 x 660 x 610 mm Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Bcsdpoynb T Hofx Ag Ijw Through-spindle coolant 20 bar Pocket milling with islands Synchronous thread cutting

Condition: used, Year of construction: 2013, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Sinumerik 840 D SL Siemens turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW Bcodpfxjym Dz Ro Ag Isw tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm tension force 8 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm distance spindle nose and table 120 - 580 mm number of toolpositions 30 pos. Max. mould width 80 / (130) mm max. tool length 250 mm max. tool weight 6 kg max. total weight 80 kg change-time tool to tool 1,6 sec change-time chip to chip 6,0 sec rapid traverse 30 m/min feed speeds 1 - 20.000 mm/min Feed force max. 5 kN total power requirement 28 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 4,0 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 635 V New Design - ShopMill - WITHOUT perforated plate - WITHOUT clamping device - WITHOUT tools

Condition: repair required (used), Renishaw InVia Raman Microscope Spectrometer Bsdpfx Ajym Dt Hsg Iecw Complete with MSC20 Encoded Stage Controller RL532C50 HPNIR Laser Source A-9803-0625 CCD Device is missing some parts to make fully operational. Device is missing Renishaw Ramen Filters as seen in images. Device also is missing original Renishaw Key to open access panel.

Condition: like new (used), functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, with acceptance protocol for tolerances equivalent to new machines. Technical Data: >> Machine Serial No.: 2268-87 >> Centre Height: 180 mm >> Distance Between Centres: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Camlock >> Tailstock Morse Taper 4 >> Feed Rates: 0.026 to 0.888 mm/rev >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake can be engaged >> Drive Power: 2.0/4.0 kW Bsdpfxjymznhs Ag Ijcw >> Dimensions (LxHxD): 2.2 m x 1.5 m x 1 m Equipment and Accessories: >> 3-axis K&C Digital Readout, new, with 12-month manufacturer’s warranty and manual >> NEW 3-jaw chuck, 200 mm, with 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine light Safety Features: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The ways have been reground or hand-scraped. Acceptance is according to inspection protocol. Finished in 2K gloss white paint. Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-like surface finishes. Take advantage of the opportunity to inspect the machine under power on-site and see its condition for yourself.

Condition: good (used), Year of construction: 2000, operating hours: 18,082 h, functionality: fully functional, machine/vehicle number: 1098000194, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 900 mm, nominal power (apparent): 46 kVA, controller manufacturer: HEIDENHAIN, total height: 3,200 mm, total length: 8,000 mm, total width: 4,000 mm, table width: 1,000 mm, table length: 1,200 mm, overall weight: 20,000 kg, operating hours of spindle: 10,403 h, number of slots in tool magazine: 60, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, Equipment: chip conveyor, DECKEL MAHO DMU 125 P Universal Machining Center - Tool holder: SK 40 - Table with 9 T-slots Bcodoym Snrepfx Ag Iow The machine is equipped with a 60-position tool changer, including the tool holders shown in the photos installed in the tool magazine, as well as a chip conveyor and coolant system. Attention: Machine vises shown in the photos are not included! Attention: The machine will be disassembled for transport to a width of 2900 mm (removal of tool changer). Attention: The item must be collected on a binding date agreed between 21/04 and 30/04/2026. FCA D-96257 Marktgraitz – loaded onto truck.

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 15025702504, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 21 kVA, controller manufacturer: HEIDENHAIN, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, table width: 500 mm, table length: 700 mm, table load: 310 kg, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, control voltage: 220 V, Equipment: chip conveyor, documentation/manual, DECKEL MAHO DMU 70 VL Universal Machining Center - Tool holder: SK 40 - Input increment X/Y/Z: 0.01 mm - Jog mode X/Y/Z: 20 - 2000 mm/min - Linear scale resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-Axis (without partition): 2350 mm, with partition: 2 x 710 mm - incl. tool changer, 2 x 32 positions - max. tool length from spindle nose: 315 mm - max. tool weight for automatic tool change: 6 kg - max. total tool weight in magazine: 80 kg - required compressed air: approx. 5.5 - 8 bar Worktables: - NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - max. table rotation speed: 16.73 rpm - swiveling speed: 14.73 rpm - swivel range: 0 to 180° - input/display increment: 0.001° - weight: approx. 310 kg - one fixed table - dimensions: 1000 x 600 mm Bcedpfx Aoym Smbsg Iow - T-slot spacing: 63 mm - number of T-slots: 9/14 H7 - incl. chip conveyor and coolant system Note: the machine can be transported on a truck with up to 2800 mm width! Note: The item must be collected between 21.04. and 30.04.2026 at a yet-to-be-agreed date. FCA D-96257 Marktgraitz – loaded onto truck