Used Chain Grinder for sale (3,715)

Condition: used, axle configuration: 3 axles, first registration: 07/1997, total length: 14,070 mm, total width: 2,480 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 9,880 mm, Year of construction: 1997, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle make: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: tyre tread left: 25%; tyre tread right: 25% Rear axle 2: tyre tread left: 30%; tyre tread right: 30% Rear axle 3: tyre tread left: 25%; tyre tread right: 25% Weights Unladen weight: 6,160 kg Payload: 37,840 kg Gross vehicle weight (GVW): 44,000 kg Rsdpfxoydlpwj Aglsn Functional Loading platform height: 140 cm Condition Damage: none Identification Registration number: OF-38-GG

Condition: used, YALE Electric Chain Hoist Crane Type CPV 10-8/20-4 Serial No.: VC 000876 S Year of manufacture: 2010 Load capacity: 2,000 kg Hook travel: 4.1 meters Lifting speed: 4 m/min Distance suspension to load hook: 550 mm Pendant cable length: approx. 2 meters 2 fall chain = 2,000 kg Motor power: 1.5 kW Mains connection: 400 Volt, 50 Hz - Emergency stop - Suspension eye on crane top - Without trolley Weight: 65 kg Good condition Rsdex Urb Nepfx Aglsn

Condition: used, Year of construction: 2022, operating hours: 8 h, For sale is an almost new 315 crawler excavator (year of manufacture 12/2022). The machine has only 8 operating hours and was used exclusively as a display unit. The excavator is in like-new, virtually unused condition. Rjdpsyfll Uefx Aglsn

Condition: excellent (used), Year of construction: 2007, 5 controlled axes: X, Y, Z, A, and B Fully automatic grinding wheel changer NUM Axium Power 1050 control system with PC TOOL DATA Max. diameter: Ø 250 mm Max. diameter for complete machining: Ø 250 mm Max. length for complete machining (from front edge of workpiece support): 430 mm Max. tool length between centers: 480 mm Center height: 195 mm X-axis grinding travel: 625 mm Z-axis cross slide travel: 305 mm Y-axis vertical slide travel: 305 mm All linear axes are driven by high-precision ball screw spindles with 2 preloaded nuts. The axes are guided on extremely robust recirculating roller shoes on hardened rails. Rsdpjxt N Izefx Aglsn GRINDING HEAD, B AXIS Swiveling range in the horizontal plane: 240° Rotational speed: 120°/s Liquid-cooled motor spindle: 150 x 150 mm Grinding wheel mount with automatic quick-clamping system HSK - C/E 50 Spindle speed infinitely variable: 2,000 - 10,000 rpm Max. grinding wheel diameter: 150 mm Grinding wheel changer with 4 magazine slots Second probe arranged on the workpiece holder for automatic grinding wheel measurement, including software CHAIN LOADING MAGAZINE with PICK-UP arm Capacity: 160 tools Maximum workpiece diameter: 32 mm Maximum workpiece length: 200 mm Maximum tool weight: 2.5 kg CNC-controlled steady rest TURBO separator (filter system)

Condition: excellent (used), Year of construction: 2017, operating hours: 595 h, WWB200 SuperGrinder. Perfect machine for kebab factories, sausage and burger producers etc. Has run for 595 hours only. Rodpfswhagtjx Aglsn

Condition: excellent (used), Knife grinder for knives up to mm 650 MVM model BM650 Rsdpfxjycdbce Aglon

Condition: excellent (used), Twist drills and taps grinder from 10 to 82 mm CUOGHI model APE 80 Rjdsycc Unepfx Aglen

Condition: excellent (used), Chain chisel KF20 With chain set Chain chisel can also be used as a hand chisel Rsdsuhn Afjpfx Aglsn

Condition: new, Year of construction: 2024, Equipment: all wheel drive, * Rubber tracks * Front dozer blade * Auxiliary hydraulics (pre-installed) * Koop diesel engine, 12 HP ----* 2 keys * ROPS with canopy * incl. bucket ----* max. dumping height: 2,490 mm * max. digging depth: 1,400 mm * Year of manufacture: 04/2024 * Dimensions (LxWxH): 2,550 x 780 x 2,195 mm ----Vehicle number: 10350----Subject to errors and prior sale----Advertising and various labels have been digitally removed.-----We are happy to assist you with all formalities related to the purchase of a vehicle. Simply let us know your requirements and suggestions, and we will take care of everything for you. Among other things, we can offer you the following services for an additional charge:----* Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing Rjdpfx Agoydudksljn * Mediation of financing * Application for export license plates * Vehicle delivery * Vehicle registration * Vehicle recovery and transport ----YOUR VTS TEAM

Condition: excellent (used), Catalogue number 7860 TECHNICAL DATA - Track width: 370mm - Roller width: 400mm - Saw blade diameter: 225-350mm - Bore diameter: 80mm - Max cutting height: 120mm - Table width with clearance: 670mm - Table length: 1650mm Top section: - Kickback devices - Slip-type steel feed roller - Kickback devices - Slip-type steel feed roller - Saw spindle - 3 pcs slip-type steel pressure rollers Bottom section: - Kickback devices Rjdpfx Agox U Tmmelsn - Track - Central lubrication - 2 feeding speed options + stepless adjustment, 1.5kW - Main motor: 30kW - Extraction port diameter: 170mm - Overall dimensions (L/W/H): 2200x1550x2100mm - Weight approx.: 3000kg ADVANTAGES – Italian-made – Stepless speed adjustment – Upper control panel – With laser – Used multi-blade saw, very good condition Net price: 55,900 PLN Net price: 13,300 EUR (depending on exchange rate 4.2 EUR) (Prices may change with higher exchange rate fluctuations)

Year of construction: 2022, condition: new, 1 x Niro-Tech all stainless steel fresh meat grinder. Model - WR-130. Output capacity - Up to 3,500kg/h depending on product. Installed power - 9kW. Electrics - 400v, 50hz, 3 phase. Rsdpfxjhq Rgdj Aglsn Hopper size - 90 litres. Meat temperature - 0-4degC Comes with a set of 1 x grinder and 2 x cutting blades. Comes with a range of hole plates with 3mm, 5mm, 8mm, 10mm, 14mm and 20mm diameter. Brand new, made to order. Supplied with 12 month warranty. Please allow a lead time of up to 6-8 weeks for the manufacture of this machine. Videos available on request.

Condition: used, Bench Grinder – CONSTAN New Star Motorist Manufacturer Constan – New Star Motorist (France) Type Double-wheel bench grinder (three-phase motor) Industrial Applications Redpfxsw Ec Nre Aglsn - Manual tool sharpening - Deburring of metal parts - Surface preparation and light grinding - Maintenance and repair workshop tasks Main Technical Specifications: - Power supply: 220 / 380 V – 50 Hz (three-phase) - Motor power: 1.5 HP - Current: 1.8 A at 380 V - Speed range: 2030 RPM max, 1550 RPM min - Rotation direction indicated by arrow 🧩 Machine Usage Heavy-duty bench grinder designed for tool sharpening, rough grinding, and surface cleanup. Ideal for general mechanical workshops, tool rooms, and industrial maintenance tasks. ⚙️ Features / Differentiators Equipped with a dual-voltage industrial motor, this grinder is adaptable to standard workshop three-phase networks. It stands out with a wide speed range, making it suitable for both fine and coarse grinding operations, and a 1.5 HP integrated motor, offering power and durability.

Condition: good (used), functionality: fully functional, machine/vehicle number: S11-016, We are selling our Deckel S11. The machine is operational, and a digital readout can optionally be purchased as well. Rsdpfx Agjw A Rrvjljn

Condition: ready for operation (used), additional equipment features: yes, Besturing: Siemens Sinumerik 840 C Siemens-aandrijving: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1230 mm Worklenth without magnetic table: 1260 mm Grindingwidth: 600 mm Rsdpfxexuwxws Aglon Longitudinal travel X-axis (autom.): 1260 mm Cross-travel Y-axis (autom.): 630 mm Travel Z-axis (autom.): 477 mm Dimensions of the table: 1215 x 500 mm Distance between table -- spindlecentre: 680 mm Max dia grindingstone: 406 x 50 x 127 mm Spindlespeeds: rpm Motorpower: 22 kW Cooling system: yes

Condition: ready for operation (used), Chain Hoist, Rema SR Star 090/55, 8 Meters, 3200 kg, Used Machine Manufacturer: Rema SR Model: Star 090/55 Overall Dimensions: Rodexxiivspfx Aglsn Width: 650 mm Depth: 350 mm Height: 460 mm Electrical Data: 400V; 2.2 kW; 4.8A Load Capacity: 3200 kg Lifting Height: 8 m In the condition shown in the pictures!

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 600 mm, feed length Y-axis: 220 mm, feed length Z-axis: 540 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 3,000 m/min, table length: 400 mm, table load: 250 kg, table width: 250 mm, Surface grinder Ziersch - ZT 24 Rodpfox Sw H Eex Aglon MACH-ID 9344 Make: Ziersch Type: ZT 24 Control: Mitsubishi TOUCH Panel Year: 2010 Sturdy, cast iron execution of all machine components High machine weight for maximum rigidity Preloaded precision linear guideways in the vertical- and cross axis (Bosch Rexroth) for highest accuracy Scraped and turcite coated slideways in the longitudinal axis provide excellent vibration absorption and a high-quality grinding surface pattern. Hydraulic longitudinal motion with return cooling unit to achieve good surfaces Electro-mechanic cross- and vertical motion Measuring systems in vertical axis (Heidenhain) for precise positioning Maintenance-free paper band filtration unit with up to 500 l tank and 2-bar pressure pump for effective cooling and rinsing Integrated rinsing channel Magnetic separator for prefiltration of the paper band filtration unit Infinitely variable grinding spindle motor Machine lamp Table-mounted dressing device for high precision and surface finish Electro-permanent magnetic chuck (SAV) with integrated pole changing unit and traction regulation Partial encapsulation of the machine with sliding door and a service door Effective splash guard and an excellent accessibility Preparation of the machine for installation of a coolant mist exhaust unit Control system features: Very comfortable and easy to operate Z-control Automatic vertical infeed with dressing amount compensation Fully automatic grinding cycle with dressing cycles Easy operation via touchscreen Large and clear colour screen (10.4") Electronic handwheel, usable in vertical- and cross axis X - Travel: 600mm Y - Travel: 220mm Z - Travel: 540mm Table Length: 400mm Table Width: 250mm Table load: 250 Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Grinding stone dimensions:250 x 38 x 50,8mm Power: 3,7kW Speeds: 4500Rpm Cooling system: Yes Feed rate Y-Axis: 30000mm/min. Length: 3050mm Width: 2050mm Height: 2510mm Weight: 2900kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, feed length X-axis: 5,500 mm, feed length Y-axis: 650 mm, feed length Z-axis: 750 mm, feed rate X-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, table length: 5,500 mm, table width: 750 mm, Profile grinder MAEGERLE - MGC-L 560 Surface, Profile grinding machine 5600 mm CNC gear rack grinding machine Automatic grinding head B-Axis Grinding head ca 20 gr swivel ARO - KKS coolant tank 8000 L ( size 4400 x 1900 x 2200) Pendel opperation ( double table) Dresser automatic Table dresser X - Travel: 5500mm Y - Travel: 650mm Z - Travel: 750mm Table Length: 5500mm Table Width: 750mm Feed rate X-Axis: 20000mm/min. Redpfx Aox Swqwegljn Feed rate Z-Axis: 20000mm/min. Grinding stone dimensions:600 x 300mm Power: 115kW Speeds: 8000Rpm Cooling system: Yes Feed rate Y-Axis: 20000mm/min. Length: 10700mm Width: 4700mm Height: 3800mm Weight: 42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 646193, total height: 2,828 mm, total length: 2,930 mm, total width: 2,418 mm, overall weight: 4,860 kg, input voltage: 400 V, year of last overhaul: 2020, Control unit by manufacturer GE Fanuc. Contents: sets of grinding wheels. Rsdoydv T Topfx Aglon

Condition: ready for operation (used), Elb SWE 6 VA II Worklenth without magnetic table: 600 mm Grindingwidth: 400 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 400 mm Travel Z-axis (autom.): 450 mm Dimensions of the table: 1100 x 450 mm Dimensions magnetic table: 700 x 200 mm Max dia grindingstone: 300x50x76 mm Spindlespeeds: 1400 x 1800 rpm Motorpower: 5.5 kW, total 13 kW Tension needed: 400V Rjdpfxex Dd Ido Aglsn

Condition: used, Year of construction: 1999, Grinding wheel diameter: max. 100 mm Speed: 3,500–7,500 rpm Power supply: 400 V, 50 Hz, 5 A Power input: 1.5 kW Fuse: 16 A Control voltage: 230 V Operating voltage: 3 x 400 V / 230 V Frequency: 50 Hz Total electrical power: approx. 1.5 kW Upper and lower grinding spindle Power: 1.1 kW at 2,800 rpm Grinding spindle speed: Upper grinding spindle: 5,800 rpm Lower grinding spindle: 5,800 rpm Speed control: 50% – 130%, approx. 3,000 – 8,000 rpm Grinding spindle rotation direction: right Max. grinding wheel diameter (upper): 100 mm Max. grinding wheel diameter (lower): 100 mm Clamping and travel ranges: Indexing head with taper holder: SK40 Grinding slide stroke: 190 mm Max. cutter length from face of indexing head at 6° clamping angle: 145 mm Max. cutter length from face of indexing head at 15° clamping angle: 165 mm Max. cutter length from face of indexing head without presetting: 210 mm Max. cutter diameter: 63 mm Cross adjustment: 100 mm Vertical adjustment: 325 mm Motorized adjustment via push button Manual adjustment via handwheel Longitudinal adjustment of lower grinding spindle: 5 mm Rotational movement of indexing head carrier: 0–3° Swivel movement of indexing head clamping and clearance angle: 63° Rsdpfxeyfpdbe Aglsn Axial adjustment of indexing head: 100 mm Cut-off spindle: 360 mm Including HITACHI profile projector and various collets in different sizes and holders Technical data: Weight: approx. 600 kg Dimensions (L x W x H): approx. 880 x 680 x 1800 mm

Condition: good (used), Year of construction: 2005, operating hours: 114,129 h, functionality: fully functional, machine/vehicle number: 2820, Sale only within Germany Control System: Siemens Sinumerik Software: Haas Software 7.3 Number of Axes: 6 (X, X3, Y, Z, C, A) Grinding Spindle: - Continuously variable up to 8,000 rpm - Haas short taper - Grinding wheel diameter max. Ø200 mm Workpiece Spindle: - Up to 1,000 rpm - Centre height 175 mm - Clamping collet 3409 - Taper mount SK50 - Through bore Ø28.5 mm - Workpiece weight up to 2.5 kg - Indexing accuracy +/- 3.5 arcseconds - Input increment 0.001° Workpiece Support: Linear axis X3 with bushing holder Feed Drives: - Linear axes with ball screw spindles - Direct length measurement with 0.0001 mm resolution Workpiece Dimensions (Drills): - Ø 0.8 - 15.0 mm - Overall length 20 - 380 mm - Grinding length 10 - 360 mm - Max. workpiece weight 2.5 kg Chain Magazine: - 42 stations - Ø 0.8 - 15.0 mm - Length 80 - 250 mm - Max. workpiece weight 1.5 kg Stack Magazine: - Preparation for stack magazine for indexable inserts Measuring System CCD Area Camera: - Indexing and positioning of tools by coolant channel (from Ø0.8 mm) - Measurement of opening angle - Indexing of multi-groove drilling and reaming tools Renishaw Probe: - Touch-off for workpiece length/tool tip - Scanning of groove pitch - Positioning in coolant channel bore at tool tip Electrical Connection: - 63A main fuse - Mains voltage 400V - Frequency 50 Hz - Control voltage 24V - Rated power 21 kW Weight: 8 t Redpowpqkrefx Agljn Including: - Control cabinet cooling: water-water heat exchanger - Fire protection system: Kraft und Bauer extinguishing system - Extraction unit: Büchel Smog-Hog SH 2000/T - Dressing unit (stationary dresser) - Pressure plate ----- Operating Procedure – For Drills: - Manual loading of chain magazine outside machine enclosure - Automated workpiece handling system - Automatic collet chuck clamping - Workpiece positioning in the working area - Workpiece machining - Automatic return of workpieces onto powered conveyor belt Operating Procedure – For Solid Carbide Indexable Inserts: - Manual loading of stack magazine inside working area - Automated workpiece handling system - Automatic clamping with special clamping fixture - Workpiece positioning in the working area - Workpiece machining - Automatic return of processed workpieces onto storage system Drill Grinding: - Grinding of flute profile - Grinding of cutting edge - Grinding of circumference profile - Grinding of relief chamfer - Grinding of periphery chamfer - Cylindrical grinding Indexable Insert Grinding: - Grinding of support face and pin ----- Two additional identical machines are also available for sale!

Condition: ready for operation (used), Year of construction: 2004, operating hours: 78,000 h, functionality: fully functional, machine/vehicle number: 216028, Sale only within Germany Rsdpfx Agex Hwyhslsn CNC Grinding Center UW I D With 5 controlled axes: X, Y, Z, A, B And fully automatic grinding wheel changer Control system: NUM 1050 M with PC Center height: 195 mm Max. tool diameter: 250 mm Grinding table X-axis Longitudinal travel: 625 mm Usable table area: 900 mm x 185 mm Cross slide Z-axis Cross travel: 305 mm Vertical slide Y-axis Vertical stroke: 305 mm Grinding head B-axis Swivels 240° Grinding wheel mount: HSK-C50 Spindle speed: 2,000 – 23,000 rpm Workpiece carrier A-axis Mount: ISO 50 Max. speed: 600 rpm A, X, Y, Z axes with direct measurement system B-axis with indirect measurement system Renishaw 3D measuring probe permanently mounted on grinding head Grinding wheel changer with 8 stations incl. 4 additional coolant nozzles Additional CNC-controlled slide unit (W-axis) Longitudinal travel: 380 mm Hydraulic vertical stroke: 40 mm Mounted on the grinding table For use with steady rest or tailstock 78,000 spindle hours 105,000 power-on hours Includes Kraft+Bauer fire extinguishing system Note: Another identical machine is also available for sale.

Condition: used, total height: 1,400 mm, total length: 1,900 mm, total width: 1,600 mm, Empty weight: 1.500 kg Tafel: 1030x214mm Travel: 600mm Rodpfx Agox R S Saslon - Documentation available: No - CE certificate present: No - Serial number: 431 - Motor power: 1.3kW - Transport dimensions: 1900mm x 1600mm x 1400mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), - Manual table adjustment - Manual belt angle adjustment - Belt width: 15 cm - Table width: 45 cm Rodpsvz Uwzefx Agljn - Table length: 92 cm - Feed speed: 3.7/22 m/min - Motor power: 2.2 kW - 400 V - Year: 2002

Condition: excellent (used), CATALOG NUMBER 7678 TECHNICAL DATA - Guide bar length: 1670 mm - Cutting length: 1500 mm - Automatic lubrication of the cutting system - Damping and tensioning system in the head - Manual feed of the guide bar - Electric motor: 7.5 kW - Transport dimensions (L/W/H): 1650x900x2350 mm - Total weight: 240 kg ADVANTAGES – Austrian manufacturing Rjdpfxjx Tpudj Agljn – Suitable for cross-cutting packs or round timber – Unpainted – Mobile, on wheels – Used saw, very good condition Net price: 25,900 PLN Net price: 6,160 EUR depending on an exchange rate of 4.2 EUR (Prices may change with greater fluctuations)