Used Chain Rotator for sale (9,946)

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 1442, power: 37 kW (50.31 HP), filling opening length: 1,300 mm, filling opening width: 1,350 mm, rotational speed (max.): 1,480 rpm, rotor width: 1,000 mm, TECHNICAL DETAILS Rotational speed: 1,480 rpm Opening width: 1,050 mm Opening length: 1,300 mm Rotor width: 1,000 mm Screen perforation: 20 mm Number of rotating knives: 26 pcs. Number of fixed knives: 36 pcs. MACHINE DETAILS Main motor power: 37 kW Power of hydraulic unit: 2.2 kW Oil tank capacity: 125 l Stroke of hydraulic cylinder: 1,000 mm Ksdszuwthspfx Ac Eedr Dimensions & Weight Dimensions (L x W x H): 4,100 x 1,800 x 3,0520 mm Weight: 5,000 kg Transport packages: 1 pc. EQUIPMENT Hydraulic cylinder

Condition: new, Year of construction: 2024, empty load weight: 178 kg, Dreipunktstreuer D301 0.3m³ Description: Spreader with three-point linkage (CAT 1) and a single spreading material chamber. The spreading material is conveyed via an auger and distributed by the patented spreading disc unit. Hydraulically driven motors, controlled by Kugelmann hydraulic block. All drives can also be operated manually in the event of control failure. Chain drive ensures high torque when starting the auger. Corrosion-resistant material combination: stainless steel subframe (VA) and plastic spreading material hopper. Support legs can be folded up towards the spreader during operation. Features: - Hydraulically driven single-chamber spreader with auger and spreading disc - Corrosion-resistant combination of stainless steel subframe and plastic hopper - Dimensions (WxDxH): 1080 x 590 x 1200 mm - Unladen weight: 178 kg - Includes apron/splash guard - Includes tarpaulin cover - Includes road lighting (compliant with StVZO) - RAL 2011 signal color - Manual emergency operation - Foldable support legs - Low energy consumption - Operable from an oil flow rate of 15 l/min - Patented spreading disc unit - Manual adjustment of spreading pattern - Winter service marked with reflective white warning film - Can be operated without control unit (via control cabinet key on easily accessible side) - Mounting for CAT 1 Kdjdpfx Ajx S Tpvec Ejr Standard Equipment: - Hydraulic drive for auger and spreading disc - Stainless steel (VA) subframe with RAL 2011 signal paint - Stainless steel spreading disc - Plastic spreading hopper - Plastic spreading disc guard - Mesh tarpaulin cover - Apron - LED lighting in accordance with StVZO - Foldable support legs (remain on device during use) - Manual adjustment of spreading pattern - Winter service marking - Operation possible without control unit - All drives are regulated and equipped with manual emergency operation - Hydraulic hoses with SVK couplings for forward and return - Spreader is fully storable (can be set down) Carrier Vehicle Requirements: - min. 20 L/min at reduced spreading output - max. 50 L/min with external oil cooler - Kugelmann system internally rated at 230 bar - Carrier vehicle with mounted spreader must not exceed permissible axle load or gross vehicle weight Optional Equipment: - k-basic 2 control unit - Wiring harness (flying) - Microprocessor control with CAN-BUS technology - Closed loop control of all drives (with feedback) - Functions: > Adjust spreading width > Adjust spreading density > Rotating beacon on/off > Work light on/off > Spreader operating/pause > Illuminated keys and rotary controls > Data recording > Speed simulation > x2 key for travel-dependent spreading (compatible with k-basic 2) - Option: Travel-dependent spreading incl. start/stop function – driving signal required - LED work light 12V Storage location: not specified

Condition: excellent (used), For sale: Mannesmann Dematic AG electric chain hoist, model DKUN 5-500 K V2. A robust, industrial-grade hoist manufactured in Germany, designed for lifting loads. The chain and hook, as shown in the photos, are included. Technical specifications: Manufacturer: Mannesmann Dematic AG Type: DKUN 5-500 K V2 Lifting capacity: 1/1 – 0.50 t / 2/1 – 1.00 t Kdsdpfjzvqk Aox Ac Eor Lifting speed: 15.0 / 7.5 m/min Motor power: 1.40 kW Power supply: 380–400 V Frequency: 50 Hz Current: 4.00–4.20 A Motor speed: 2720 rpm Protection rating: IP55 Chain: 5.3 × 15.2 8DK Factory number: 63159709 Ident-No.: 836 334 44 Year of manufacture: 2000 Weight: approx. 39 kg Country of manufacture: Germany Condition: Used hoist, in the condition shown in the photos. Important information: one of the mounting bracket/lug elements is partially broken off, as clearly shown in the photos. This damage does not affect the operation or functionality of the hoist. The hoist is sold exactly as shown in the photos.

Condition: new, functionality: fully functional, Year of construction: 2025, SCHORR RR1000KB PETROL-POWERED SWEEPER INCLUDING SNOW BLADE AND COLLECTION CONTAINER SWEEPING MACHINE PETROL ◾ Impressive cleaning performance for outdoor applications ◾ Powerful 6.5 HP 4-stroke petrol engine – ready to use even in cold weather ◾ Robust sweeper with 100 cm working width – ideal for large courtyards, paths & expansive areas ◾ Includes snow blade, collection container & snow chains – suitable for year-round use, including winter maintenance ◾ Effortless operation – user-friendly, requires minimal effort ◾ Adjustable brush angle (left / right / straight) – efficient cleaning in all directions ◾ 3 forward gears & 1 reverse gear for optimum maneuverability ◾ Large-tread pneumatic wheels with differential lock – excellent grip on any surface ◾ Fully supported: Guaranteed spare parts supply & workshop service Maximum cleaning performance – all year round The SCHORR RR1000KB is a high-performance petrol sweeper, providing versatile all-round support on farmyards, walkways, or company premises. With a reliable 4-stroke petrol engine (196 cm³), you remain independent of weather or mains power – simply start up and go, even in frosty conditions. 100 CM SWEEPING WIDTH FOR LARGE AREAS & PRISTINE RESULTS Thanks to its wide sweeping brush with wear-resistant synthetic bristles, this petrol broom easily handles leaves, dirt, grit, spreading material, or even snow. The sweeper is perfectly suited for year-round use on driveways, pavements, forecourts, or industrial yards. The brush rotation is powerful and consistent, ensuring even compacted dirt is thoroughly removed. Built for tough outdoor applications Coarse-tread pneumatic tyres with differential lock guarantee optimal traction, even in damp or icy conditions. The robust steel frame delivers outstanding resistance to impacts and vibrations – ideal for daily, intensive use. Designed with maintenance in mind: all key components are easily accessible. COMPLETE SOLUTION WITH SNOW BLADE & COLLECTION CONTAINER Supplied with a heavy-duty snow blade featuring a rubber edge, which can be installed in just a few steps. Matching snow chains for both drive wheels are also included in the delivery. Also convenient: the large debris collection container efficiently gathers swept material. This saves time and effort, as no follow-up sweeping is needed. The motorised sweeping broom features a reliable 4-speed transmission with 3 forward and 1 reverse gear, allowing you to select the ideal speed and direction at any time. The brush unit is pivotable. Technical Data Manufacturer (Short Code): SCHORR Manufacturer’s Model: RR1000KB Fuel type: Petrol Engine: 1 cylinder 4-stroke petrol OHV Kdodsw Af I Sjpfx Ac Ejr Power: 6.5 HP Main brush diameter: 1000 mm Brush rotation speed: 180 - 350 rpm Starter: Recoil starter Weight: 81 kg Main Dimensions Overall length: 1480 mm Overall width: 1100 mm Overall height: 1250 mm

Condition: used, Year of construction: 2012, operating hours: 8,501 h, Equipment: all wheel drive, MAKE: DOOSAN TYPE: DX140 LCR YEAR: 2012 CE MARKED: YES OPERATING HOURS: 8501 HOURS TYRES/UNDERCARRIAGE: 50% Ksdpfx Acozg Sfie Ejdr POWER: 74KW ENGINE: CUMMINS QSB 4.5 WEIGHT: 14,800 KG OPTIONS: TRACK EXCAVATOR BLADE VA BOOM WORK LIGHT HAMMER LINES SORTING FUNCTION HYDRAULIC QUICK COUPLER AIR CONDITIONING KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN THE NETHERLANDS VAT ID: NL864089764B01

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Kjdpfx Aeyuty Ssc Eodr Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: CR-Lack, Demag Tandem Chain Hoist Crane Lifting Unit 2x 2500kg DC-Pro 16-2500 H6 V6/1.5 Load capacity 2x 2500kg / 2.5t load capacity / lifting capacity - 2-strand - total lifting capacity 5000kg - 5t 7x DC double chain hoists available!!! 5x DK double chain hoists available!!! with articulated trolley drive, chassis prepared for mounting on approx. HEA/HEB/HEM beams (flange width 300mm) with 2 lifting speeds, lifting height 6m!!! incl. HBC radio remote control Length of the lifting unit approx. 2.5m Kjdpfx Aezh U Nyoc Ejdr Total weight approx. 600 kg, connection to 400V 50Hz Very good condition, fully functional Item location is 75053 Gondelsheim See pictures

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 974/1-810, functionality: fully functional, operating hours: 1,483 h, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, controller model: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026 and will continue to operate until August 5, 2026. The machine has the following configuration: Edge milling unit 1802 Motor power: 2 x 2.0 kW 1st milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for edge milling unit 2nd milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for edge milling unit Edge feeder 1901 SYNCHRO (fully automatic) Glue application station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: Reservoir for 14 cartridges (1.4 kg) GluJet collection container Printing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic Multi-function milling unit 1826 MOT4 Motor power: 2 x 0.65 kW Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, left-hand rotation Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, right-hand rotation Profile milling unit 1833 MOT4 1st milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM technology 2nd milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM technology Scraping blade unit 1929 MOT4 Tungsten carbide reversible inserts for scraping blade holder R = 2 mm (2 pieces required) Surface scraping blade FK 701 Smoothing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spray device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Workpiece length min: 160 mm Workpiece width min: 60 mm Workpiece thickness: 8 - 60 mm Edge height max.: 65 mm Edge thickness roll material: 0.4 - 3 mm Edge thickness strip material max.: 8 mm MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed guide rail length: 1,350 mm Electrical system for stepless feed: 400 V / 50 Hz Feed electric motor: 2.2 kW Operating hours: 1,483 h Ksdpfx Acszrf Nrj Ejdr EQUIPMENT Motorized pressure bridge adjustment Nesting - tactile probe vertical, top & bottom Edition 18 package ECO MODE energy-saving mode ITronic system

Condition: used, functionality: unexamined, fuel type: diesel, color: orange, overall weight: 34,190 kg, number of seats: 1, mast type: mono, Year of construction: 2010, operating hours: 15,658 h, Equipment: CE marking, air conditioning, cabin, onboard computer, steel tracks, Hitachi ZX350LCN-3 tracked excavator Year: 2010 15,658 hours Used machine Kdsdpeznwhlefx Ac Esr More information available on the Almerisan website.

Condition: new, working width: 105,000 mm, For inquiries regarding the attachment, Mr. Herden will assist you (by phone at ...). Seppi M. H3 105 Mulcher / incl. rotation motor / NEW / in stock & immediately available Price: €10,590.00 net / €12,602.10 gross - Working width: 105 cm Kdsdpfxjyix Hte Ac Esr - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulching head for mounting on a hydraulic boom - Mulches grass and brush up to 3 cm Ø - Suitable for excavators from 2 to 5 tons - Compatible with various mounting plate systems - Floating mount (parallelogram guide) - Indirect V-belt drive with 3 V-belts - Drive suitable for hydraulic motor depending on the carrier machine's hydraulic flow - Housing made of wear-resistant AR400 steel - Front protection with chains - Rear protection with rubber guard - Reinforced support roller with double taper roller bearings, height-adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW hammers (standard) - 9 pcs., part number 150.02.041 OPT 429 Hydraulic gear motor 17 cm³ - With flow control valve and "DRAIN SAFE TM" motor safety valve protects the motor in the event of incorrect use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 35 - 60 OPT 529 DRAINLESS system with pressure accumulator (NO drain line required!) - Including hoses and check valve OPT 372 Hydraulic 190° rotation device Optional: MS03 adapter plate incl. intermediate flange, bolts and installation = €700 net Two hydraulic lines are required: supply and return. No drain line needed! Additionally, a separate hydraulic circuit is required for the rotator. The machine is delivered without hoses or couplings. Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a wide selection of various Seppi M. products available from stock! Feel free to contact us at / . Upon request, we are happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. product range! Subject to errors and prior sale! = More information = Contact Marius Herden for more information.

Condition: used, Edge banding machine Brand: Brandt Model: Profiline KDF 670-C Hiflex Single-sided edge banding machine in right-hand design, for hot melt gluing. Quick-change gluing unit for hot melt glue. Processing with PU glue granulate possible in accordance with glue specifications. Leak-proof glue reservoir under the glue roller. Precise glue application to the workpiece with glue roller, no adjustment of workpiece thickness necessary. Glue roller with selectable rotation direction for counter or forward feed. Glue temperature monitoring via electronic thermostat. Automatic reduction of glue temperature during work breaks. Infrared heating for hot melt reactivation. Automatic edge banding magazine for roll material and fixed lengths, including roll plate with a diameter of 800 mm and reinforced cutting shears for thick PVC/ABS, max. 3 x 45 mm. Kdjdpfx Asynhwfec Ejr Standard equipment with edge banding and workpiece – distance monitoring with optical display. Stable pressure zone with driven, compressed air-loaded main pressure roller and 3 free-running post-press rollers. Standard equipment with automatic central lubrication for the transport chain. Motor-driven adjustment of overpressure. Control panel at the machine infeed. Technical data Edge strip thickness: 0.4 – 12 mm Cutting tool: max. 3.0 x 45 mm or 0.8 x 65 mm Workpiece thickness: 8 – 60 mm Feed speed: 11 – 16 m/min (see below) When selecting edge banding thicker than 3 mm, the feed speed is automatically switched to 14 m/min. automatically to 14 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Electrical connection: 400 V, 3-phase, 50 Hz Compressed air connection: 6 bar Connected load approx. 17 kW Machine length: 6,860 mm Full information about the machine can be found on our webpage burbagemaskin.se

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 28464, overall weight: 2,300 kg, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, CAT 500 cutting center – an automatic machine designed for cutting PVC profiles using a circular saw. Numerical control with dedicated software allows for programming processing parameters, limiting the operator's tasks to loading profiles and collecting finished parts. Saw parameters: - Arbor: Ø 30 mm - Diameter: Ø 500 mm - Rotational speed: 3000 rpm - Max. saw blade thickness: 4.2 mm Kjdpfx Acjzvmh Ro Eedr Technical data: - Voltage: 380–400 V AC3PE - Current: 8 A - Frequency: 50 Hz - Power: 3.8 kW - Air pressure: 7 bar - Weight: 2300 kg Standard equipment: - Tungsten carbide saw blade Ø 500 mm (arbor Ø30) - Welded frame with adjustable feet and the possibility of mounting to the floor - Industrial computer integrated with the machine - Infeed belts with inverter control and programmable acceleration/deceleration ramps - Label printer Dimensions: - Infeed: 7900 mm - Machine: 1000 mm - Outfeed: 2600 mm - Max. width: 2300 mm - Max. height: 1700 mm - Overall length: 11500 mm

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 3,000 W, Description BAISON G24C: (3 kW) PROFESSIONAL TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND AUTOMATIC UNLOADING SYSTEM This machine is also for profile, tub and different shape. Tube size range: Round tube: φ10-φ240mm Square tube: □10*10-□220*220mm Channel Steel: 22#（need nesting software and specialized fixtures） Angle Iron: 10#（need nesting software and specialized fixtures） I-beam:22#（need nesting software and specialized fixtures） H-beam:22#（need nesting software and specialized fixtures） Max.Tube Cutting Length 6.500 mm Effective cutting diameter for round pipes Ø10 mm – Ø240 mm Effective cutting size for square pipes □10 mm – □220 mm Max. Single Tube Weight 300 kg X/Y/Z axis travel 350 / 6,500 / 500 mm Ultra-short Tail Material ≥100 mm Positioning accuracy ±0.03 mm/m Repeatability accuracy ±0.03 mm Maximum travel speed Y axis 100 m/min Universal maximum rotation speed 140 r/min Maximum acceleration 1.0G Maximum pipe feed length 6,500 mm Total electrical power of the machine 24.8kw/59A Machine size 10.151 x 3.362 x 2.400 mm Weight of the machine 4.596 kg (Including Semi-automatic loading system and automatic unloading system) Configuration: ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 3 kW Laser head with automatic focus – RAYTOOLS Controller system – FSCUT 3000DE-G Automatic self-centering pneumatic chucks Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Servo motors – BOCHU Reducer – TECHMECH Guide rail – SHAC Proportional valve – SMC / FESTO Welded and heat-treated machine bed – BAISON Wireless remote controller High precision X/Y transmission mode with rack and rails – K.H Computer with Windows 11 interface, Internet & WIFI Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Semi-automatic loading system with chain Automatic unloading system: 3.000 mm with following motor Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Safety relay Complete CE standard Assisting gases (16 bars air compressor can be also used for cutting): - mild steel - oxygen (0.5 - 2 bar) - stainless steel - nitrogen (5 - 16 bar) - Aluminium - compressed air or nitrogen (5 - 16 bar) - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future Kdsdpfxsvcbrhs Ac Eer - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Optional: Light barrier safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Kedporn Sqhsfx Ac Eedr Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. Rotary Actuator / MS08 / 5-10t / CUT CONTROL / NEW / In Stock & Immediately Available Price: €21,390.00 net / €25,454.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavator mounting - Designed for mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - Suitable for excavators from 5-10 tonnes - Can be mounted to various adapter plates - Drive designed for hydraulic motor, dependent on the carrier’s hydraulic flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the full hood length - Front protection with chain guard - Rear protection with chain guard - Adjustable skid runners, reinforced with carbide plate - Colour: Red RAL3020 · Anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide tips) 21 units, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and overpressure valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 40 - 100 OPT372 hydraulic 190° rotation device OPT158 electric valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: supply, return, and drain. A double-acting hydraulic connection is also required for the hydraulic hood. The device is supplied without hoses, fittings or mounting plate. Mr. Herden (phone ...) will be happy to assist you. Upon request, we are pleased to provide you with a financing offer. We are an authorised distribution and service partner for Seppi M. We are an authorised distribution and service partner for Westtech. We are an authorised distribution and service partner for Gierking GMT. We are an authorised distribution and service partner for OilQuick. We are an authorised distribution and service partner for Weber MT. We are an authorised distribution and service partner for Holp. We are an authorised distribution and service partner for DMS. We are an authorised distribution and service partner for Magni Telescopic Handlers. Ksdpfx Aceyltvuo Eodr We are an authorised distribution and service partner for JCB Construction Machinery. We are an authorised distribution and service partner for Mercedes-Benz. We are an authorised distribution and service partner for Iveco. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted. = Further Information = Please contact Marius Herden for further information.

Condition: used, Year of construction: 2017, operating hours: 4,921 h, Equipment: all wheel drive, Komatsu PC490LC-10 - Year of manufacture: 2017 - 270 kW - Weight: 47,410 kg - Camera - LED work lights - Cabin rockfall protection grid Kodevc Tftopfx Ac Eodr - Central lubrication system - Radio - An additional/standard arm will be supplied and is included with the excavator. Subject to errors and prior sale. Internal vehicle number: 10220 WhatsApp support available! If you have questions about the machine or need further information, feel free to contact us conveniently by WhatsApp. WhatsApp WhatsApp

Condition: used, empty load weight: 9,580 kg, maximum load weight: 30,420 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2027, suspension: air, tire size: 235/75R17,5 --/140J, color: other, gearing type: other, front tire size: 235/75R17,5 --/140J, rear tire size: 235/75R17,5 --/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Air suspension with lifting and lowering function, axle load scales, total platform length approximately 9,100 mm, low-bed platform approximately 6,900 mm long, loading height (loaded) approximately 890 mm, 24 x lashing points, 10 tons each, 12 x stake pockets in the outer frame, access ramps (approximately 3,100 x 760 mm), access ramps adjustable laterally, 68 mm thick wooden floor, storage box with lid for lashing chains or tension straps, contour marking according to regulations, rotating beacon, spring-loaded parking brake, incl. axle load indicators, vehicle hot-dip galvanized, -- subject to printing errors, errors and changes, sample images --, more data available at: !, More Details: ! Kdjdpfsztd Susx Ac Eor

Condition: ready for operation (used), functionality: fully functional, power: 141 kW (191.71 HP), shovel volume: 1.6 m³, Year of construction: 2005, machine/vehicle number: CAT 0325CCCRB01219, Ready for use Kdodsylatyepfx Ac Ejr

Condition: used, empty load weight: 3,500 kg, maximum load weight: 3 kg, overall weight: 7,310 kg, tire size: 365/80R20, tire condition: 50 %, color: orange, Year of construction: 2010, front tire size: 365/80R20 | 50%, rear tire size: 365/80R20 | 50%, operation weight: 7,310 kg, maximum speed: 90 km/h, Equipment: air conditioning, compressed air brake, lighting, Tyres (front): 365/80R20, Tyres (rear): 365/80R20, Forward gears: 16, Reverse gears: 8, First registration: 01.06.2010, Automatic tow hitch We are selling 1 used Mercedes Benz Unimog U 400, 6-cylinder, from year of manufacture 2010, with approx. 10,800 operating hours and 188,000 kilometres. Kdjdpfxsyq Aqro Ac Eer Equipment: 231 hp, dual-mode steering, rear mounting brackets, air-conditioning, reversing camera, heated windscreen, Automatic Shift EAS, hydrostatic drive, 2-circuit hydraulics, radio, rotating beacon, front PTO, drop-side flatbed body, tipping cylinder, spreader chains, torsion frame, tyres 365/80R20 Conti MPT 81, separate return lines front and rear, 4-section hydraulics, 24V socket. Machine is in need of repair. Further details on condition available on request. Detailed equipment specification also available on request. Location: 94491 Hengersberg

Condition: new, For enquiries about the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. MINI-BMS 105 / Forestry Mulcher / MS08 / 5-10 t / CUT CONTROL / NEW / in stock & immediately available Price: €15,890.00 net / €18,909.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavator mounting - Suitable for mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - For excavators from 5-10 tonnes - Compatible with various mounting plates - Drive via hydraulic motor, depending on the carrier’s oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along full hood length - Front protection with chains - Rear protection with chains - Height-adjustable skid plates, reinforced with tungsten carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry Rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL: Kodpfx Aoyltvnsc Ejdr - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW: Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and pressure relief valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 40 - 100 Intermediary adapter for BE314 Z1 - approx. 200 mm high - Not required when using OPT 372 hydraulic 190° rotation device Optional: MS08 adapter plate incl. bolts and installation = €1,410.00 net For operation, an autonomous hydraulic system is recommended. 3 hydraulic lines are required: supply, return, and drainage. A double-acting hydraulic connection is additionally needed for the hydraulic hood. The machine is delivered without hoses, fittings, and mounting plate. Mr. Herden (phone) will be happy to assist you. We are also happy to provide a financing offer upon request. We are an authorised distribution and service partner for Seppi M. We are an authorised distribution and service partner for Westtech. We are an authorised distribution and service partner for Gierking GMT. We are an authorised distribution and service partner for OilQuick. We are an authorised distribution and service partner for Weber MT. We are an authorised distribution and service partner for Holp. We are an authorised distribution and service partner for DMS. We are an authorised distribution and service partner for Magni telehandlers. We are an authorised distribution and service partner for JCB construction machinery. We are an authorised distribution and service partner for Mercedes-Benz. We are an authorised distribution and service partner for Iveco. With a stock of 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! = More information = Contact Marius Herden for further information.

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, soot filter, The ISUZU commercial vehicle center in Germany offers competence, service, and consulting: ISUZU M30 H with automatic transmission with torque converter + hooklift JOTHA 5518 for containers from 3 to 10 m³ + winter service equipment 3-year warranty on the base vehicle from the date of initial registration or 100,000 km PAYLOAD 3,260 kg at a GVW of 7,490 kg or 4,270 kg at 8,500 kg Equipment: - 5.2 L Turbo Diesel with Common Rail direct injection 140 kW / 190 HP EURO VI OBD-E (max. torque 510 Nm at 1,600 - 2,800 rpm) - Particle filter system with DPD system and AdBlue (the self-cleaning system allows the filter to be cleaned without a workshop visit, thanks to the new DPD regeneration technology, which indicates when the function is needed. You only need to press the DPD button and the system cleans itself in 20 minutes) - Automated transmission (NEES II) with 6 gears and smooth, finely controllable starting is provided by an integrated torque converter! The gears can also be shifted manually sequentially on the gear selector. Depending on the load, the driver can pre-select whether the vehicle should start in 1st or 2nd gear using a button.) - Engine brake, cruise control - Leaf spring suspension front axle (axle load max. 3,100 kg), leaf spring suspension rear axle (axle load max. 5,800 kg) - Tires 215 / 75 R17.5 M+S - ABS with EBD and electronic traction control on the rear axle (ASR) - Electronic Vehicle Stability Control (EVSC) system - Lane departure warning system - Emergency braking assistant - Wheelbase 3,365 mm - Air conditioning - Suspended driver's seat, passenger double seat bench, 3-seater - Electric windows, electrically adjustable and heated exterior mirrors - Electronic immobilizer, central locking with remote control - Radio with Bluetooth hands-free system, Digital EG - control unit 4.0 (GNNS) - Fog lights, daytime running lights, light sensor for headlights Kjdpfxsr Ed D Ae Ac Eedr - Driver and passenger airbags, headrests - Height and tilt adjustable steering wheel, interior mirror - Spare wheel with bracket on the vehicle body Additional equipment: - Vehicle underbody and chassis preservation - Ball head coupling 3.5 t trailer load (max. total towing weight 11,000 kg) - Work lights LED 1x rear on the protective grille - Additional LED headlights dimmable incl. turn signals on the cab roof - Rotating beacon, extendable - Warning marking red / white - Engine-mounted hydraulic system with 2 double-acting control functions at the front and 1 working circuit at the rear, drive via engine-dependent tandem gear pump, temperature-controlled oil cooler with fan, hydraulic front lifting device FIEDLER with quick-release plate Vehicle body: Hooklift body type JOTHA CombiCon 5518 - Robust construction and best quality for lasting durability - Transport and unloading of standard containers from 3 - 10 m³ according to DIN 30720 and JOTHA flatbed containers FL 1830 - Lifting capacity 5,500 kg, lifting capacity 800 mm underground 3,900 kg, lifting capacity telescopic extended 3,300 kg - Color: anthracite - Swiveling device with 2 outriggers, cross shaft and chain suspension - Telescopic lifting arms independently controllable, lifting stroke 1,000 mm - Support legs individually controllable - Chain suspension: 8 mm with safety snap hooks, length adjustable - Hydraulic tipping hook - Control block at the front on the body longitudinal beam - Quick-action valve for lifting arm operation, manual control valves with Load Sensing System for fine

Condition: used, Year of construction: 2013, operating hours: 12,489 h, Caterpillar 308 E2 tracked excavator (rubber tracks) with a blade * Operating hours: approx. 12,489 h * VIN: CAT0308EATMX01275 Equipment: * Rubber tracks * Dozer blade * Quick coupler Kdsdpfxsy I Ibfo Ac Eor * Powertilt * 4 buckets included * Year of manufacture: 2013 Weight: * Operating weight: approx. 8,300 kg Net price* All information without guarantee. Tel.: call (Contact · Phone · Mobile · WhatsApp)

Condition: used, Year of construction: 1990, Equipment: all wheel drive, * O&K crawler excavator * Year of manufacture 1990 * Window defect * Needs repair Ksdpfx Aewpptlec Ejdr * Work lights * Bucket ----Internal vehicle number: 10119-----Subject to errors and prior sale

Condition: new, Year of construction: 2025, Roll forming roof panel machine F3 with cover Roll forming roof panel machine F3 is roofing equipment that is used in process of standing seam roof panel production and standing seam roofing installation. With help of electric motor torque goes from motor through sprockets and the connection chains to the rolling rollers of the machine making them to rotate and form necessary profile. In order to protect workers while working with roll forming roof panel machine, we offer to equip it with standard side covers and additional top part cover to protect forming part of machine. So, using standing seam roofing machine F3 with protective covers operators of machine will be protected from injury, and machine would be protected from any outside object to get into working mechanism. However, while working with roof machine, it’s possible to take off upper cover and leave side covers of machine while working. If upper cover isn’t needed you can purchase machine without it. Our roll former standing seam machine is light and mobile one so you can work with it at your workshop or directly at roof installation place saving money on transportation expenses. Roll forming roof panel machine F3 has special adjusting screw to adjust machine for different panel width production. You just need to rotate adjusting screw to get necessary panel width sizes. Standing seam roof machine F3 can work with different materials such as steel, aluminum, copper. Machine can be adjusted to roll different metal thicknesses. As additional options with F3 machine you can get: Kdodpfx Aceh R I Iuj Ejr length measuring device ribbed panel rolls radius panel rolls cross cutting knife floor decoiler hand seamers electric seaming machine ESM-1 sliding clip formers ribbed panel forming machine RPFM

Condition: used, Year of construction: 2009, Edge banding machine Manufacturer: IMA Type: Novimat/I/G80/650/R3 Year of manufacture: 2009 Technical data - Workpiece overhang from the chain conveyor: 38 mm - Feed width: min. 65 mm (with max. workpiece thickness of 25 mm) - Workpiece length in feed direction: 150 mm - Overall height (top edge of chain conveyor): 960 mm - Feed speed: approx. 6 - 30 m/min, electrically adjustable - Machine control system ICOS open compact Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65 mm - Workpiece thickness: 8 - 40 mm (with edge trimming function) / 60 mm (without edge trimming function) - Smallest workpiece: 150 x 150 mm or 65 x 300 mm - Edge material: paper, plastic and veneer - Height: 14 - 65 mm - Roller material thickness: 0.3 - 3.0 mm (veneer edges limited to max. 1.0 mm) - Max. upper edge overhang: 5 mm Units Infeed area - Release agent applicator mounted at the top and bottom, not adjustable Edge trimming - 2 motors 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - Motor 1 counter-rotating - Motor 2 co-rotating Gluing unit VTG 3-6 - with one preheating nozzle 300 mm for preheating the workpiece edge - 6-position edge magazine for roller material 0.3 - 3 mm thick. - 1 driven main pressure roller and 4 pressure rollers, with scraper, pneumatically adjustable Glue application - with pneumatic quick-lock system - Chem-Coat coating - electronic temperature control - Volume 0.8 l Pre-melting tank approx. 1 l - Heating power 3 x 400 W - with EVA glue, approx. 7.0 kg/h - with filler-free glue, approx. 5.0 kg/h Cutting unit - 2 motors 660 W, 200 Hz - incl. frequency inverter with braking function - pneumatic pivoting 0+25 for straight and bevel cutting Flush trimming - 2 motors each 1000 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function Multi-profile trimming unit - 2 motors each 660 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function - for trimming 4 profiles - with stepper motor axes for horizontal and vertical positioning Contour trimming unit KFA x30 - 1 motor 500 W, 400 V, 400 Hz, 18000 rpm - Program-controlled conversion for up to 4 profiles - incl. fine positioning for different edge thicknesses Multi-profile scraping blade - Stepper motor axes for horizontal and vertical positioning - Scanning from above and below (max. 4 profiles) - Scanning from the side via pneumatic pressure Kodpjzuyi Eefx Ac Ejdr Spray nozzles at the top and bottom for applying cleaning agents - fixed, not adjustable Surface scraping blade - with height sensing skid - electronically controlled horizontal positioning Buffing unit - 2 lower and 2 upper motors, 180 W, 50 Hz, 1400 rpm - 1st motor pair with cloth-sisal discs 50x160x19 mm - 2nd motor pair with polishing discs 50x160x19 mm - The motors operate in the same direction and are both tilted and pivoted in the feed direction. - Each motor can be individually adjusted vertically 2x NC-controlled grooving - 2 milling motors each 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - one manual 90-degree pivoting device from 180 -270 with co- and counter-rotating function - Horizontal, stepless adjustment with AC servo motor for grooving unit Workpiece return Note: The technical data and descriptions are copies of the order confirmation at the time. The information is for informational purposes only and is non-binding.