Used Clamping Devices for sale (18,957)

Condition: good (used), Here we offer a Bosch Sigpack Systems unit with a Manz Aico pendant hand programming device. Bosch Sigpack Systems with Manz Aico pendant hand programming device Bosch Sigpack Systems XR31-3 with Manz Aico pendant P51 hand programming device 80017134 Bosch Sigpack Systems Type: XR31-3 Manz hand programming device Type: 80017134 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax. Hnedpjzdrzrjfx Abvjn

Condition: excellent (used), Electro-hydraulic lifting device, linear drive, linear gearbox, lifting gearbox, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, actuator motor, actuator cylinder for rotor brake, disc brake, electro-hydraulic disc brake, crane brake, electro-hydraulic lifting device, lifting drive -Manufacturer: EMG Eldro Electro-hydraulic lifting device, unused -Type: Eldro Ed 80/6 -Item no.: 1045 2806 lifting drive Eldro Ed 80/6 -Stroke: 60 mm -Shaft: Ø 20 mm -Quantity: 3 pieces available -Price: per piece -Dimensions: 490/190/H255 mm Hnsdpfx Aov Hxw Asbven -Total weight: 22 kg/pc.

Condition: used, Flame Heating Device Roland Groß + Söhne GmbH Ring Burner for Preheating Weld Seams, Casting Preheating, etc. Model: 1 x 1" Ionization Serial No.: ALMA Year of Manufacture: 03/20 Connection Voltage: 230 Volt Hjdedz Spwjpfx Abvenn Max. Gas Pressure: 500 mbar Max. Air Pressure: 10 bar Max. Gas Flow Rate: 30 Nm³/h Max. Air Flow Rate: 300 Nm³/h Including 10 Different Flame Ring Nozzles - Flame monitoring by Hans Henning - Hinged ring nozzle made of two half-shells, inner Ø 310 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 400 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 490 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 500 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 590 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 800 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 990 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, arc length 1500 mm, with hose quick-connect coupling and ignition device, central outlet For heating pipes and vessels. For heating steel to welding temperature. Ideal for repair welds and the fabrication of welded assemblies from fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high velocity flame spraying. Gas heating for thermal coating applications.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Dosing unit MOTAN Gravicolor 30 with GRAVInet Stock no.: 503694 Machine type/ Hodpfx Abezdi Ngevenn Device type: Dosing unit Manufacturer: MOTAN Type: Gravicolor 30 with GRAVInet Year of manufacture: 2017 GRAVICOLOR precisely mixes and doses up to six materials with the highest recipe accuracy. These modular, gravimetric dosing and mixing units are specifically designed for injection molding, blow molding, and extrusion applications with throughput rates of up to 2200 kg/h. Regardless of recipes, materials, or the application environment, IntelliBlend continuously analyzes all process data and achieves the best possible operating point at all times through self-optimization. The highest level of recipe adherence results in the best and most consistent product quality.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Metering device Motan Minicolor V Stock No.: 503689 Machine type / Device type: Metering device Manufacturer: Motan Type: Minicolor V Year of manufacture: 2010 Hnedozdi Iiepfx Abvon incl. VOLUnet MC Mono incl. HES 50-1ANC conveying unit

Condition: like new (used), number 5 Stück weight 4,05 kg/Stück range L-W-H 315 x 70 x 40 mm Fork-type clamping jaw with nose, DIN 6315 GN, slot width × total length: 26 × Hsdpfx Aozd E Uxjbvenn 315 mm >> Technical Description >> --> Slot width: 26 mm --> Total length: 315 mm --> For clamping screws: M24 --> Height: 40 mm --> Width: 70 mm --> Type: 6315GN --> Standard: DIN 6315 GN

Condition: like new (used), number 3 Stück weight 3,05 kg/Stück range L-W-H 250 x 66 x 40 mm Beveled fork clamping block, DIN 6315 B, slot width × total length: 26 × 250 mm >> Technical Description >> Hnodpfxszd E Urs Abvon --> Slot width: 26 mm --> Total length: 250 mm --> For clamping screws: M24 --> Height: 40 mm --> Width: 66 mm --> Type: 6315 B --> Product type: Clamping bar

Condition: like new (used), number 11 Stück weight 3,80 kg/Stück range L-W-H 315 x 64 x 40 mm Hnedpfxjzd E Ulo Abven Fork-type clamping block with nose, DIN 6315 GN, slot width × total length:24x315 mm >> Technical Description >> --> Slot width: 24 mm --> Total length: 315 mm --> For clamping screws: M22; M24 --> Height: 40 mm --> Width: 64 mm --> Type: 6315B --> Product type: Clamping bar

Condition: like new (used), number 4 Stück weight 1,80 kg/Stück range L-W-H 250 x 50 x 30 mm Hodpezd E Ufefx Abvenn Fork-type clamping bar with nose, DIN 6315 GN, slot width × total length: 18 × 250 mm >> Technical Description >> --> Slot width: 18 mm --> Total length: 250 mm --> For clamping screws: 5/8; M16; M18 --> Height: 30 mm --> Width: 50 mm --> Type: 6315GN --> Standard: DIN 6315 GN --> Product type: Clamping bar

Condition: like new (used), number 2 Stück weight 16,05 kg/Stück range L-W-H 695 x 78 x 60 mm Beveled fork clamping bar, DIN 6315 B, slot width × total length: 30 × 695 mm >> Technical Description >> Hnsdpfx Abozd E T Usvon --> Slot width: 30 mm --> Total length: 695 mm --> For clamping screws: M30 --> Height: 60 mm --> Width: 78 mm --> Type: 6315 B --> Product type: Clamping bar

Condition: good (used), The delivery includes: 1x multi-tier trolley, used Manufacturer: Fetra Material color: (frame): blue Material color: (wood): similar to beech Overall height: approx. 1,510 mm Overall width: approx. 1,010 mm Overall width: (without handle) approx. 910 mm Usable width: approx. 850 mm Overall depth: approx. 495 mm Frame profile, round tube: approx. 28 mm Floor dimensions: approx. 850 x 485 x 20 mm Floors adjustable in increments of: approx. 100 mm Ground clearance: approx. 185 mm Roller diameter: approx. 150 mm Roller width: approx. 35 mm Roller material: rubber Roller design: 2x twin-wheel swivel caster with brake / 2x fixed caster Hnedpfx Abszc I Imeven Number of floor levels: 04 Distance between levels: approx. 400 mm Self-weight: approx. 54 kg Weight per level: approx. 90 kg Permissible total weight: approx. 500 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item will incur extra costs, which can be requested separately depending on the delivery location and scope.

Condition: excellent (used), overall weight: 4,800 kg, total height: 390 mm, total length: 4,660 mm, total width: 2,100 mm, T slotted bed plate STOLLE - SDT Cast iron floorplates 4660 x 2100 x 390 mm (5x) there is a 3e (shorter) plate avaielebl in size 3050 x 2100 x 390 mm  Hsdozc Im Nepfx Abvjnn   Vloerplaat lengte: 4660mm Vloerplaat breedte: 2100mm Vloerplaat dikte: 390mm Aantal T gleuven: 7 Sprong / Hart op Hart: 300mm T -slot size: 28mm Gewicht per plaat ca.: 4800kg Number of matching pieces:2,5 Lengte: 4660mm Breedte: 2100mm Hoogte: 390mm Gewicht: 4800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), number 4 Stück weight 3,8 kg range L-W-H 180 x 180 x 70 mm Multi Quick MQ 130 Set - (clamping force 35 kN) This infinitely adjustable clamping element is characterised by its high horizontal and vertical adjustability, thanks to the triple clamping shoe and integrated bearing plate. It is designed for light machining applications, thanks to the aluminium clamping shoe. Hnedpfxjzdk Epo Abven --> high clamping force --> low tightening torque --> dual infinitely variable adjustment range --> high adjustability thanks to integrated bearing plate --> high clamping heights thanks to multi-clamping shoe Price per unit, discount available for bulk purchases

Condition: used, Year of construction: 2006, Nominal volume flow: 4900 m³/h. Minimum volume flow: 3532 m³/h. Intake nozzle: 250 mm. Static pressure at Vmin: 2740 Pa. Air pressure connection: 8.5 bar. Motor: 6.5 kW. Hodpjzd An Njfx Abvjnn Storage location: Nattheim.

Condition: excellent (used), EM TEST esd NX30 ESD Simulator 30 kV Manufacturer: EM TEST / AMETEK Type: esd NX30 Device Type: ESD Simulator / EMC Test Equipment Professional ESD testing system for performing ESD immunity tests according to IEC 61000-4-2 and ISO 10605. The device generates air and contact discharges up to 30 kV and is suitable for EMC laboratories, development, quality assurance, and certification applications. Technical Data Air discharge: 200 V to 30 kV ±5% Contact discharge: 200 V to 30 kV ±5% Polarity: positive / negative / alternating Operating modes: single and continuous operation Frequency: 0.5 to 20 Hz, air discharge up to 25 Hz Color touch display Integrated event and activity logger Power supply: battery and mains operation Battery capacity for up to 30,000 discharges at 30 kV Remote interface via fiber optic USB Interlock function Remote trigger EUT fail detection Scope of supply EM TEST esd NX30 base unit Hjdpfjzc Ehwox Abvenn ESD gun with color display Power supply Transport case 2 discharge networks as shown in the pictures Adapters and accessories as shown in the pictures Dimensions Base unit: approx. 170 x 360 x 140 mm ESD gun: approx. 85 x 270 x 260 mm Weight base unit: approx. 6.5 kg Condition Used device. Optical condition as shown in the pictures. Signs of wear and tear due to age and use. Scope of supply 1x EM TEST esd NX30 base unit 1x ESD gun 1x Power supply 1x Transport case 2x Discharge networks Adapters and accessories as shown in the pictures Shipping or freight shipping possible. Subject to change, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: new, Year of construction: 2021, weight / kg Hnsdpfx Abjzcq N Tsvsn

Condition: used, / weight 75 kg Center height: approx. 215mm dimension Length: about 370mm Hjdpfezcq Hxex Abvjnn Width: about 260mm Height: approx. 340mm Chuck diameter: 190mm Lining passage: 60mm Weight: 75kg NEIGHBOR

Condition: used, / weight 140 kg dimension Length: about 430mm Width: approx. 530mm Hnodpfxezcq Hlj Abvjn Height: about 370mm Weight: 140kg

Condition: like new (used), number 4 Stück weight 3,8 kg range L-W-H 180 x 180 x 70 mm Multi Quick MQ 130 Set - (clamping force 35 kN) This infinitely adjustable clamping element is characterised by its high horizontal and vertical adjustability, thanks to the triple clamping shoe and integrated bearing plate. It is designed for light machining applications, thanks to the aluminium clamping shoe. --> high clamping force --> low tightening torque --> dual infinitely variable adjustment range --> high adjustability thanks to integrated bearing plate --> high clamping heights thanks to multi-clamping shoe Price per unit, discount available for bulk purchases Hnedpfx Aszc Rrusbvon

Condition: good (used), 2 used T-slot angle plates Height: 1500 mm Width: 1000 mm Depth: 500 mm Hsdpjy Iakfsfx Abvonn 10 transverse slots 3 longitudinal slots First-class surface finish

Condition: excellent (used), Year of construction: 2007, overall weight: 3,800 kg, total length: 900 mm, total width: 900 mm, total height: 1,400 mm, construction height: 1,400 mm, 1 used clamping tower Manufacturer: Schunk Type: Unilock 2x8 NSE 138T Year of construction: 2007 Technical Data: Hnsdpfsuykhkex Abvjn Hybrid tensioning tower with T-slots Screw-in system Zero point clamping system LxWxH= 900x900x1400 Weight: 3800 kg Spring-loaded system - Pneumatic opening Turbo function Technical data: Dimensions: Ø138 x Ø110 x 59 mm Pull-in force: 7 kN Pull-in force with turbo: 24 kN Actuating pressure: 6 bar Repeat accuracy: < 0.005 mm Weight: 3.5 kg

Year of construction: 1968, condition: good (used), 1 used thread whirling machine for lathes Hnedpspit Afefx Abvjn make Burgsmüller type L 2 serial number 68/1724

Year of construction: 1990, condition: excellent (used), used T-slot clamping angle Technical data: Dimensions height 1120 mm width 320 mm Groove width 20 mm Hjdjgwxmxepfx Abvsnn with - 7 horizontal T-slots used, in good condition

Condition: used, Used crane runway system with vacuum handling Year of manufacture: 2017 Load capacity: 250 kg (at lifting device) Crane runway: 6 m Bridge: 6 m Vacuum lifter B 3 UW H K 250 V with 2 oval suction plates 500 x 2500 mm Hjdszc Agdepfx Abvsnn Vacuum generation: pneumatic with ejector Operating pressure: 7 bar, filtered compressed air required Air consumption: approx. 7 NL/sec. with ABM electric chain hoist Lifting speed: 0...10 m/min, infinitely adjustable Operation via special handle on the vacuum lifter. Lifting movement is infinitely variable by frequency converter Availability: by arrangement Storage location: Hesse

Condition: used, Hydromechanical, NC machine vise, VIS - HYDRAULIQUE Precision machine vise, spanner Type 20700 Year of manufacture approx. 2000 Jaw width 150 mm Jaw height 42 mm Hodpfezczvqjx Abvonn Clamping range 0 to 250 mm Opening width max. 252 mm Clamping force 6 tons Guide rail height 51 mm Guide rail length 450 mm - Hydromechanical machine vise - Quick adjustment with clamping ball lock in a hole grid, 8 positions - Stable base body, ground on all sides - Can be mounted horizontally, vertically, or laterally - Guide rail with 19 mm guide groove - Additionally, 1 set of prism jaws Dimensions L x W x H 480 x 150 x 107 mm Weight 32 kg Good condition