Used Cmm for sale (144)

Condition: new, pressure 60,0 t square edge steel 35,0 mm L-beam 120x120x12 mm round bar steel 40,0 mm punching cross-cut in cmm Ø28 in 15 / Ø38 in 11 mm throat 220 mm flat steel 200x20 / 300x15 mm blade length 317 mm oil volume 45,0 ltr. work height max. 940 / 1140 mm strokes per minute max. 26 work stroke 55,0 mm total power requirement 4,0 kW weight of the machine ca. 1425 kg. Dimensions (HxWxD) 1510 x 590 x 1570 mm Furnishing: - Support table at the hole punch - Support table on the square notcher - foot switch - Bed. Instructions - CE declaration Gjdpfxsxcuxqj Ahnebn + MUBEA - punch and die holder

Condition: used, Year of construction: 2015, WENZEL coordinate measuring machine (CMM) Gbodpfxexu Nwle Ahnsn Travel distances: X2000, Y1200, Z1000 mm Year of manufacture: 2015

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: Gbedow Titlopfx Ahnon In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2020, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Professional handheld measurement system for precise 3D measurements directly in production environments. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a dedicated measuring room, complex setup, or special CMM expertise. The device is ideally suited for manufacturing operations, quality assurance, initial sample inspection reports (ISIR/PPAP), in-process controls, as well as for reverse engineering. Technical Data – KEYENCE XM-C1000 / XM-H1000 (XM Series) Measuring System (General) Specification: Measurement range (XYZ): approx. 600 × 300 × 200 mm (depending on setup) Measurement accuracy: ±(8 + L/80) µm (L = measured length in mm) Repeatability: ±3 µm (typical) Resolution: 1 µm Measuring principle: Optical tracking with camera-based detection Calibration: User calibration with calibration sphere possible CAD Comparison: Directly on the device (STEP, IGES, etc.) Export formats: PDF, Excel, CSV, DXF Tolerance analysis: Automatic with color mapping XM-C1000 – Control and Evaluation Unit (Controller) Component: Display: 15” touchscreen Connections: USB, LAN, HDMI, power Storage options: Internal + USB export Software functions: Measurement, CAD comparison, report generation Operation: Touchscreen + pushbutton operation Languages: Multilingual (including German) XM-H1000 – Handheld Probe Specification: Probe type: Handheld with pressure button Feedback: LED status indicator, vibration signal Probe tip: Interchangeable, various tips available Tracking: Detected via controller’s camera system System Characteristics Specification: Operating temperature: 10 – 35 °C Power supply: 100–240 V AC, 50/60 Hz System dimensions (complete): approx. 800 × 600 × 800 mm (depending on setup) Total system weight: approx. 25–40 kg (depending on configuration) Mounting: On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld probe Gjdpowxvmdofx Ahnsbn XM-C1000 (Controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & Delivery: Shipping via freight forwarding Collection by appointment possible. International shipping available on request. If you have any questions, need further information or wish to arrange a viewing appointment, please feel free to contact us. (Subject to changes and errors in the technical data and information!) We are also happy to answer any further questions by phone.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 287651, measuring range X-axis: 1,500 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,400 mm, workpiece weight (max.): 7,400 kg, warranty duration: 6 months, total height: 3,063 mm, type of input current: AC, total width: 2,200 mm, total length: 3,100 mm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,400 mm, overall weight: 7,400 kg, input voltage: 230 V, travel speed (max.): 500 mm/min, repeat accuracy: 2.2 mm, compressed air connection: 6 bar, year of last overhaul: 2025, ambient temperature (max.): 20 °C, ambient temperature (min.): 16 °C, Equipment: documentation/manual, We offer this ex-display machine GLOBAL ADVANTAGE coordinate measuring machine, year of construction 2022. Manufacturer: GLOBAL Model: ADVANTAGE Year of construction: 2022 Condition: ex-display machine Category ID: 1486 Type ID: 1927 Type: coordinate measuring machine If you have any questions or need more information, feel free to send us a message or give us a call. We are pleased to offer a "used-like-new" Hexagon Global Advantage 15-20-14 Coordinate Measuring Machine (CMM) for immediate sale. Manufactured in 2022, this high-speed, accurate bridge CMM is in excellent condition and optimized for complex inspections. Key Specifications & Features: - System: Equipped with LEITZ HP-S-X5 Analog scanning and PC-DMIS CAD++ Premium license. - HP-S-X5 Probe System: Designed for high-accuracy continuous scanning and repeatable measurements, even with heavy stylus extensions. - Performance: High-speed motion devices ensure efficient scanning and reduced inspection times. - Applications: Ideal for complex geometries such as blades, gears, and screw compressors, as well as high-volume quality control. - Included Accessories: Tool changer rack and all necessary tooling. Gbsdpoy Hfhyefx Ahnen Service and Support: - Warranty: Full 6-month warranty included. - Support: Installation, calibration, commissioning, and training will be provided by OZ Metrology Please find the technical accuracy sheet attached for your review. If you are interested or have any questions regarding this configuration, please let us know. A Same system with same configuration costs $USD500,000+++ a new one.

Condition: good (used), Year of construction: 2015, functionality: fully functional, measuring range X-axis: 905 mm, measuring range Y-axis: 1,005 mm, measuring range Z-axis: 805 mm, Purchase your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: CRYSTA-Apex S9108 Year of manufacture: 2015 Manufacturer: Mitutoyo Measuring range: 905 x 1005 x 805 mm Accessories: Probe head interface: PH10MQ Probe head: Renishaw TP2000 Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 As specialists, we are happy to offer you personalized advice to find the right machine for your measurement requirements. Gjdpfx Asyhmg Sohnjbn Worldwide delivery available on request!

Condition: good (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 800 mm, Buy your coordinate measuring machine (CMM) from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: CRYSTA-Apex C9168 Year of manufacture: mid-2006 Manufacturer: Mitutoyo Measuring range: 900 x 1600 x 800 mm Controller: UC-200H Operation manual: available Gbsdpexqnxasfx Ahnsn Accessories: Probe head mount: Renishaw PH10MQ Probe head: Renishaw TP200 Additional accessories: Ceramic calibration sphere Renishaw change rack 1 x SCR-200 We are happy to provide individual advice as specialists to find the right machine for your measuring task. Worldwide delivery available on request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Purchase your coordinate measuring machine from the leading specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been thoroughly checked, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Crysta Apex 7106 Year of manufacture: 2004 Manufacturer: Mitutoyo Gbsdpfoyg Nl Uox Ahnsn Measuring range: 700 x 1000 x 600 mm Accessories: Probe head mount: PH10MQ Probe: Renishaw TP 200 Renishaw Additional accessories: Ceramic calibration sphere, Windows 11 PC, MCOSMOS 4.0, calibration sphere We are happy to provide tailored advice as specialists to help you find the right machine for your measurement tasks. Worldwide delivery available on request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Buy your coordinate measuring machine from the leading specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Gjdpfx Asyg Iryehnebn Machine type: Crysta Apex 9106 Year of manufacture: 2004 Manufacturer: Mitutoyo Measuring range: 900 x 1000 x 600 mm Accessories: Probe head mount: PH10MQ Probe head: Renishaw TP 2000 Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to provide individual consulting as specialists to help you find the right machine for your measurement task. Worldwide delivery available upon request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 800 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Crysta C Apex 9208 Year of manufacture: 2004 Manufacturer: Mitutoyo Measuring range: 900 x 2000 x 800 mm Accessories: Gedpfxjyg Iy Do Ahnsbn Probe head mount: PH10MQ Probe head: Renishaw TP 2000 Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to provide individual consultation as specialists to help you find the right machine for your measurement task. Worldwide delivery available upon request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 1,000 mm, Purchase your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been inspected, tested, and guaranteed to be ready for operation from A to Z – quality you can trust. General machine data: Machine type: Crysta C Apex 123010 Year of manufacture: 2004 Manufacturer: Mitutoyo Gbedpsyg I Alsfx Ahnen Measuring range: 1200 x 3000 x 1000 mm Accessories: Probe head mount: PH10MQ Probe: Renishaw TP 2000 Additional accessories: Calibration sphere (ceramic), Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to offer you expert advice as specialists to help you find the right machine for your measurement task. Worldwide delivery available on request!

Condition: good (used), Year of construction: 2005, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 600 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl Messtechnik. With KNEISSL-Approved, you receive a used machine that has been checked, tested, and guaranteed to be ready for operation from A to Z – quality you can trust. General machine data: Machine type: Crysta Apex 9166 Year of manufacture: 2005 Manufacturer: Mitutoyo Measuring range: 900 x 1600 x 600 mm Accessories: Gbodpfx Ahoyg Iubenjn Probe head mount: PH10MQ Probe head: Renishaw TP 2000 Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to offer individual advice as specialists to help you find the right machine for your measurement application. Worldwide delivery available on request!

Condition: good (used), Year of construction: 2022, UK DELIVERY ONLY Developed for the shop-floor, the TIGO SF is a fully-protected and versatile coordinate measuring machine (CMM) that combines robust construction, innovative technology and flexibility of setup to ensure high-accuracy measurement in the harshest of environments. Tigo SF 5.6.5 HH-A-T5, 5° Automatic Indexing Head HP-S-X1S Analogue Scanning Probe Standard Styli Kit PC-DMIS Measurement Software Year of Manufacture 2022 Please contact us for alternative configurations. Gsdpou Spvqjfx Ahnobn Measuring Range: X 500mm, Y 580mm, Z 500mm MPE(E0/E60) (18 °C - 22 °C) 2.2 + L/300 See Datasheet for further information.

Year of construction: 2000, condition: excellent (used), Technical data Manufacturer: ZEISS Type: SMM-C Year of construction: 2000 Double-Station CMM Measuring range X = 6000 mm Y = 2 x 1100 mm Z = 2400 mm Equipment Control C99 The machine can be modernized with new accessories according to customer requirements. Price: on request! Installation and commissioning possible! We would be happy to provide you with a detailed offer. Please note: Our offer is directed exclusively to professional customers. Godpfx Ajf S A Afohnobn (Changes and errors in the technical data, information and prices and subject to prior sale)

Year of construction: 2008, condition: excellent (used), machine/vehicle number: 149720, Technical data Manufacturer: ZEISS Type: Per T-Premium Year of construction: 2008 Single State CMM Serial number: 149720 Measuring range X = 3000 mm Y = 1800 mm Z = 2100 mm Equipment Tactile buttons Control C99 Software CMMOS, Caligo Holos 3.0, DMIS The machine can be upgraded with new accessories according to customer requirements. Price: on request! Installation and commissioning possible! We would be happy to provide you with a detailed offer. Please note: Our offer is directed exclusively to professional customers. Gbedpef S A Aisfx Ahnjn (Changes and errors in the technical data, information and prices and subject to prior sale)

Year of construction: 1999, condition: excellent (used), machine/vehicle number: 105220 & 105221, Technical data Manufacturer: ZEISS Type: SMM-C Year of manufacture: 1999 Double stander CMM Machine number: 105220 & 105221 Measuring plate Stiefelmayer measuring plate Godpfxjgi D Nlj Ahnobn X = 6000 mm Y = 3000 mm Equipment ZEISS control system year of construction 2007 The machine can be modernized with new accessories according to customer requirements. Price: on request! Assembly and commissioning possible! We will be happy to provide you with a detailed offer. Note: Our offer is directed exclusively at specialist customers. (Changes and errors in the technical data, information and prices as well as and prices as well as subject to prior sale).

Year of construction: 2007, condition: excellent (used), machine/vehicle number: 926-0167-02, The ScanWorks V5 provides the largest field of view available in a line scanner with state of the art scanning. The ScanWork portable scanning system combines the ease-of-use of portable CMM arms with the sophistication of Perceptron's scanning technology. The V5 is capable of scanning 458,400 points per second with a minimum point-topoint resolution of 12 microns. Additional features of the V5 include: Large field of view - 140 mm and 110 mm Projected rangefinder - projects accurate trapezoidal representation of field of view and optimal scanning offset distance - enabling users to become familiar with good scanning procedure. Godpfxofy Nzbj Ahnjbn Dynamic range - captures accurate data on dark and reflective surfaces, negating the need for white powder sprays. Sensor is impervious to ambient light. This lightweight scanner (.75 lb) can rapidly capture large, geometrically complex areas with direct integration into your configuration of PolyWorks. Benefits of SharkScan non-contact laser scanning: Non-contact laser scanning avoids marring of sensitive surfaces or deflection of thin or soft materials. Real-time inspection allows rapid identification of errors, allowing for quick correction.Ideal for generating point clouds for reverse engineering (via PolyWorks Modeler).

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 002689 / 002688, Technical data Manufacturer: Wenzel Type: RA1624 Triplex with underfloor Year of manufacture: 2000 Double pedestal CMM with additional underfloor measuring arm Serial number: 002689 / 002688 Measuring range X = 6500 mm Y = 1600 / 1600 mm Z = 2500 mm Touch probe Software: Metrosoft CM SP2 3 x Wenzel WPC 2010 Renishaw PHC10-2 Probe Head Controller 2 x Renishaw PHS heads with different probe lengths The machine can be modernized with new accessories according to customer requirements. Gbedpfxogm Tyie Ahnen Price: on request! Assembly and commissioning possible! We will be happy to provide you with a detailed offer. Note: Our offer is directed exclusively at specialist customers. (Changes and errors in the technical data, information and prices as well as and prices as well as subject to prior sale).

Condition: excellent (used), Various ZEISS eagle eye navigator as shown in the offer. Product description of the manufacturer: Rapid quality assurance in car body construction In addition to countless holes, edges are in the automotive industry to measure such as cuts and transitions as well. Straight in the series, the control of drilling is a very time-consuming job. With the EagleEye Navigator saves nearly half of the time for a complete body. Typical intensive working steps of the conventional method completely eliminated: no mounting and dismounting of hemisphere adapters, materials, storage and handling costs. Shortened lead times and high quality And that's not all: the use of ZEISS EagleEye navigator shortens the throughput time of measuring immediately and increases the quality of pressed parts at the same time. At the end of a high exactly can be evaluated result with details of the diameter, the position and shape of the measuring element - is exactly the micrometer. With ZEISS EagleEye navigator is the CMM to the means of production. Data and price: On request! We can make you a detailed offer! Gbjdpedy Apvofx Ahnjn Note: Our offer is aimed exclusively at professionals! (Errors and omissions in the technical data, information and prices and subject to prior sale!)

Year of construction: 1996, condition: used, Technical data Horizontal type Joint plate, but both measuring arms run in single-stand operation SMM1, serial No. 7057760595(1), year 1995 SMM2, 96346 serial number, year of manufacture 1996 Measuring plate X = 3500 mm Y = 2000 mm Measuring volume SMM1 X = 2500 mm Y = 1600 mm Z = 1800 mm Measuring volume SMM2 X = 2500 mm Gsdpjdtf I Hofx Ahnobn Y = 1200 mm Z = 1500 mm Software 1 x, Holos CNC dongle operated Prof license light, extended and geo with Windows 7. 2 x interface licenses HOLOS QS-STAT 2 x control software CMM OS CNC 5-axis units The machine can be upgraded to customer specification with new software. Price: On request! Setup and commissioning possible! We can make you a detailed offer! Note: Our offer is aimed exclusively at professionals! (Errors and omissions in the technical data, information and prices and subject to prior sale!)

Condition: new, Year of construction: 2025, functionality: fully functional, Aberlink's Horizon 1000 CNC Coordinate Measuring Machine (CMM) builds on the success of the Horizon 800, offering extended travels of X 1000mm, Y 1200 or 2000mm and Z 800mm. It uses frictionless linear actuators that provide fast, smooth and silent movement, making it particularly suitable for use in inspection rooms. The design has been optimized to improve the stiffness to weight ratio of the bridge assembly, with the Y-axis rail increased by 200mm to increase rigidity. Drive is through the center of gravity, improving both speed and accuracy. Thermal isolation of the motors from the metrological structure prevents thermally induced measurement errors. With a volumetric accuracy of up to (1.75 + L/250)µm and a scale resolution of 0.1µm, the Horizon 1000 ensures the highest precision. Gedpfx Ahsvwa Uqenebn The user-friendly Aberlink 3D measurement software enables a short training period, so that precise measurements can be carried out even without prior knowledge. Free software updates ensure that the system is always up to date.

Condition: new, Year of construction: 2025, functionality: fully functional, The Aberlink Azimuth CNC Coordinate Measuring Machine (CMM) is the largest model in our range and reflects over twenty years of experience and excellence in developing innovative metrology. It has been specifically designed for the precise measurement of large and heavy workpieces weighing up to 6000kg. The revolutionary bridge design incorporates aluminium honeycomb core panels originally developed for Formula 1 and aerospace. This design offers a remarkable stiffness to weight ratio that improves both the performance and speed of the Azimuth. With travels of X 1200mm, Y 2000 or 3000mm and Z 1000mm and volumetric accuracy of up to (2.6 + L/250)µm, the Azimuth ensures the highest precision. The scale resolution is 0.1µm. A specially designed load plate system allows heavy components to be placed directly on the granite base, transferring the load directly to the floor without affecting metrological performance. Gjdpfx Aovwbabshnsbn The user-friendly Aberlink 3D measurement software enables a short training period, so that even without prior knowledge, precise measurements can be taken. Free software updates ensure that the system is always kept up to date.

Condition: new, Year of construction: 2025, functionality: fully functional, Aberlink's Horizon CNC Coordinate Measuring Machine (CMM) sets new standards in metrology by using frictionless linear drives that ensure fast, smooth and silent movements. This technology minimizes wear and increases reliability, which reduces maintenance. The granite base and Y-axis rail make the most of the thermal stability of this material to ensure precise measurements. Gjdevwa Udspfx Ahnebn The Horizon CMM is available in a range of sizes, with travels of X 800 mm, Y 1000 or 1600 mm and Z 600 mm, to suit different measurement requirements. Volumetric accuracy is (1.8 + L/350)µm with the TP20 probe, (1.7 + L/350)µm with the TP200 probe and (1.5 + L/350)µm with the SP25M scanner. The scale resolution is 0.1µm. Thanks to the user-friendly Aberlink 3D measurement software, the training time is minimal, so that precise measurements can be carried out even without prior knowledge. Free software updates ensure that the system is always up to date.

Condition: new, Year of construction: 2025, functionality: fully functional, The Axiom too is a manual coordinate measuring machine (CMM) from Aberlink designed for precise measurement of small to medium-sized components in workshop and test environments. With travels of X 640 mm, Y 600/900/1200 mm and Z 500 mm, it offers flexibility for various measurement requirements. The aluminum bridge construction ensures low mass and high acceleration so that measurements can be carried out efficiently. Thanks to the thermal stability, the device adapts quickly to ambient temperatures, making it ideal for use in non-air-conditioned environments. The software compensates for temperature fluctuations and provides results as if they were measured at 20°C. With a volumetric accuracy of up to (2.4 + L/250)µm and a scale resolution of 0.5µm, the Axiom too ensures the highest precision. It is worth mentioning that the manual CMM can be upgraded to CNC operation at any time to meet future measurement requirements. Free software updates ensure that the system is always up to date. Gbsdpfxovwa Tmo Ahnen

Condition: new, Year of construction: 2025, functionality: fully functional, Aberlink's Halo CNC coordinate measuring machine (CMM) combines high precision with affordable metrology. Gjdevwa T Hopfx Ahnobn It features a bridge design and belt drive for the X, Y and Z axes, making it ideal for use in inspection departments and on the shop floor. With travels of X 800 mm, Y 1000 or 1600 mm and Z 600 mm, the Halo CMM offers flexibility for various measurement requirements. The solid granite plate ensures high load-bearing capacity and stability. Thanks to the user-friendly Aberlink 3D measuring software, the training time is minimal, so that precise measurements can be taken even without prior knowledge. The volumetric accuracy is (2.1 + L/250)µm with the TP20 probe, (2.0 + L/250)µm with the TP200 probe and (1.8 + L/250)µm with the SP25M scanner. The scale resolution is 0.1µm. The Halo CMM is a cost-effective solution for precise measurements in various industrial applications.