Used Cnc Aggregate for sale (9,546)

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, roller (bottom) diameter: 160 mm, roller (top) diameter: 175 mm, side roll diameter: 135 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness (max.): 7 mm, power: 4.4 kW (5.98 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: centralized greasing system, cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Electronically Controlled, Electrohydraulic Four-Roller Plate Bending Machine Manufacturer: FACCIN, Model 4 EDL 1617 Technical Specifications: Number of rollers: Four Geometry of side rollers: Linear guides Working width: 1500 mm Top roller diameter: 175 mm Bottom roller diameter: 160 mm Side roller diameter: 135 mm Pressing force against top roller: 80 tons Guaranteed installed power: 4.4 kW (6 HP) Guaranteed maximum rotation speed: 0–10 m/min Guaranteed machine weight: 3,150 kg Length: 3,300 mm Width: 1,170 mm Height: 1,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Rolling capacity (full working width): 7 mm Pre-bending capacity (full working width): 6 mm From pipe diameter: 875 mm Rolling capacity (full working width): 5 mm Pre-bending capacity (full working width): 5 mm From pipe diameter: 225 mm Standard Equipment: Nedowwt Ddopfx Almjda Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for roller rotation Extra heavy-duty, double-support swing bearing Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens PLC control system Electric drive for top roller for increased efficiency Safety trip wire with emergency stop and CE certification Centralized lubrication Cone bending device Optional Equipment Included: CNC control PGS-ABSOLUTE

Condition: used, Year of construction: 1988, x-travel 0600 mm y-travel 450 mm z-travel 450 mm quill stroke 80 mm table-size 1000 x 400 mm spindle turning speed range 20 - 3000 U/min Njdpfju Rt I Iox Almjda spindle taper SK 40 feeds - automatic programming 1 - 4000 mm/min rapid traverse 6 m/min control Philips 432 power capacity 12 kW total power requirement 15 kW CNC control Philips 423, V-head swivelling, coolant pump, hydraulic tool clamping, autom. central lubrication, machine light, with protection cabin, diverse accessories.

Condition: used, Year of construction: 2011, max. workpiece length 4100 mm profile spindle 8 Stück Ndedpjzughuofx Almsa main drive 16 kW Control SIEMENS Working Process Wooden Window Production Line ----- Sale on behalf of the client; ex-site. System can be viewed while still in operation! System comprising: Item 1: Infeed conveyor following the planer (planer NOT included) Item 2: Working Process Sapiens, Year of Mfg. 2011 (end-grain milling and drilling) - Spindle 1: 10 kW, HSK-E63, A/C-axis - Spindle 2: 10 kW, HSK-E63, A/C-axis - Spindle 3: 16 kW, HSK-E63, C-axis - Spindle 4: 16 kW, HSK-E63, C-axis Item 3: Transport system to LOGOS SCH Item 4: Working Process LOGOS SCH, Year of Mfg. 2008 (end-grain and longitudinal milling and drilling) - Spindle 1: 16 kW, HSK-E63 - Spindle 2: 16 kW, HSK-E63, C-axis - Spindle 3: 10 kW, HSK-E63, C-axis, A-axis - Spindle 4: 3 kW, fixed configuration, for 2 tools (e.g., for weather-seal grooves, wood-aluminum clip slots, etc.) - Central pick-up tool changer with 95 tool positions Item 5: Outfeed conveyor Detailed descriptions and layout available upon request! (Technical specifications according to manufacturer – subject to change/without guarantee!)

Condition: excellent (used), DOOSAN PUMA 3100 XLY CNC LATHE ONLY 2163 RUN TIME HOURS !!!!! UPGRADED FANUC I CONTROL 305 MM HYD CHUCK 420 MM TURNING DIA 2125 MM TURNING LENGTH MAX SWING 850 MM MAX SWING OVER CROSS SLIDE 670 MM X TRAVEL 293 / Y TRAVEL 130 MM / Z TRAVEL 2190 MM FULL C AXIS AND Y AXIS HYD STEADY - SMW SLU-X-4-MS ( CAPACITY 30 - 245 ) MAX SPINDLE SPEED 2800 TOOL PROBING DRIVEN TOOLS - 2+2 + STATIC HOLDERS Nedpfszumadox Almsda SPINDLE POWER 35 HP YEAR 2012 THIS MACHINE HAS BEEN ONE OWNER ONE OPERATOR SINCE NEW - NEVER REQUIRED A REALIGNMENT - IMPECCIBLE CONDITION THROUGHOUT LOCATION NORTHERN IRELAND LOADING - FREE TRANSPORT CAN BE PRICED - PLEASE GIVE FULL ADDRESS

Condition: used, Webster Bennett 48 Inch Elevating Rail CNC Vertical Borer. Serial Number 6644-1 Ndsdpfjymc Ipox Almsa Chuck manual 48 inch, supplied with jaws Hydraulic turret Fanuc 18i -T Control. Swarf conveyor Air conditioning Unit on Electrical Panel. 1250mm (approx. ) under tool to table.

Condition: excellent (used), Year of construction: 2015, X-axis 850 mm Y-axis 520 mm Z-axis 475 mm Spindle speed 10,000 rpm Spindle mount HSK 100 Tool changer 40 positions Control SIEMENS 840 Dsl Power 33 kVA Ndjdpewvr Tnjfx Almsa Including internal coolant (IKZ) Including various tool holders Including measuring probe TS 649 Including Rotoclear Spindle hours: 10,730 h

Condition: used, Year of construction: 2003, Technical details: turning diameter: 640 / 400 mm Ndodpfx Alsyv Dnkomoa turning length: 1500 mm control: Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z: 550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis): ±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/24/60 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 12 / 23 kW Torque of milling spindle: 100 Nm Tool magazine for milling spindle (turret 1): 120 HSK-A 63 Tool change time tool/tool, milling spindle: 1,6 s Spindle 1 RPM: 4000 1/min Spindle 1 power: 36/ 45 kW Spindle 1 Torque: 730 Nm Spindle 1 max. bar diameter: 90 Spindle 2 RPM: 4000 1/min Spindle 2 power: 36 / 45 kW Spindle 2 torque: 730 Nm Spindle 2 max. bar diameter: 90 c-axis: 0,001 ° Travel turret 2 x: 225 mm Travel Turret 2 z: 1595 mm RPM of rotary tools turret 2: 4000 1/min no. of tools in turret 2: 12 VDI 40 high-pressure pump: 20 bar total power requirement: 110 kVA weight of the machine ca.: 24 t dimensions of the machine ca.: 9,3 x 4,6 x 3,1 m Accerories Chip conveyor Automatic door High performance turning and milling center with milling head (X, Y, Z, B-Axis), tool magazine with 120 pos. HSK-A 63. Excellent for manufacturing excentric parts. Coolant system with 1000 l tank and coolant system 4 kW. Both spindles have differencial pressure clamping system Steayrest for lower turret dia 8-101 mm. Parts gripper for turret No. 2 with 3-jaw chuck for parts with max. dia. 140 mm. Conveyor belt for finished parts. Preparation for 3D-probe Toolmonitor Artis Machine can be shown under power. *

Condition: excellent (used), Year of construction: 2007, X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 740 mm Max. workpiece size: 1,600 x 700 mm Max. table load: 1,200 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer: 24 positions Control system: HAAS Version M15 Ndsdozcpplspfx Almsa Includes 4th and 5th axes, ORIGINAL HAAS Includes chip conveyor Includes documentation

Condition: not inspected (used), Mitutoyo Quick Vision Apex QV-X404P1L-C CNC Image Processing Measuring Machine / Optical Measuring System Manufacturer: Mitutoyo Corporation Type: QV-X404P1L-C Code No.: 363-131EU Professional CNC image measuring system for non-contact dimensional measurement tasks. For sale is a used Mitutoyo Quick Vision Apex CNC image processing measuring machine, including the existing PC system, two monitors, control unit, measuring software, and extensive documentation. The existing PC system and the installed QVPAK software start. However, the complete machine and measuring function could not be fully tested. The Quick Vision series is used for non-contact dimensional measurement of workpieces using an optical system, image acquisition, and image processing. Suitable for precise measuring and testing tasks, including those involving components from the electronics, precision mechanics, and industrial manufacturing sectors. Technical data: Manufacturer: Mitutoyo Corporation Model: Quick Vision Apex Type: QV-X404P1L-C Code No.: 363-131EU Country of manufacture: Japan Machine type: CNC image processing measuring machine Measuring range X / Y / Z: approx. 400 × 400 × 250 mm Measuring principle: non-contact optical image measurement CNC-controlled measuring system Existing measuring software: Mitutoyo QVPAK QVPAK (R): Version 7.502.0010 QVGEO: Version 7.502.0010 Statistics: Version 7.502.0010 Equipment: Ndjdpfoztyabsx Almea Mitutoyo Quick Vision Apex measuring machine PC workstation Fujitsu Siemens CELSIUS PC system 2 Fujitsu monitors Keyboard and mouse Mitutoyo control unit / joystick with emergency stop QVPAK measuring software Mitutoyo MCOSMOS / MiCAT data carrier GEOPAK documentation QVPAK documentation Other Mitutoyo operating manuals and documents Clamping plate / workpiece fixture as shown in the picture Connecting cables and accessories as shown in the picture Application areas: Optical dimensional inspection Non-contact workpiece measurement Quality assurance Precision measurement technology Component and contour inspection Manufacturing and process control Scope of delivery: Mitutoyo Quick Vision Apex QV-X404P1L-C with PC workstation, monitors, control unit, existing software, documentation, and accessories as shown in the pictures. Scope of delivery is limited to what is shown in the pictures. Condition: Used Optical condition according to the pictures PC system and existing QVPAK software start. Signs of wear and tear due to age and use are present. Visible damage / signs of wear are present on the machine housing, see pictures. Important note: The machine has not been tested because it is in a protection mode after being moved. This is also intended by the manufacturer during machine transport. The machine must be put back into operation by qualified Mitutoyo personnel. Shipping by freight forwarder is possible. Subject to changes, errors, and prior sale. We are happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2014, operating hours: 367 h, functionality: fully functional, turning length: 2,845 mm, turning diameter: 1,150 mm, total height: 1,890 mm, total length: 6,740 mm, total width: 2,205 mm, workpiece weight (max.): 5,000 kg, overall weight: 9,170 kg, Equipment: documentation/manual, Hankook Protec 9NC 3000 Flat Bed CNC Lathe — 2014 Year: 2014 Machine: Hankook Protec 9NC 3000 Type: Flat Bed CNC Lathe Running Hours: 367 hours Available for sale is a 2014 Hankook Protec 9NC 3000 Flat Bed CNC Lathe, showing just 367 hours. Ndjdpfszvgayjx Almja The machine is supplied with all three steady rests, making this a very well-equipped machine and an excellent opportunity for anyone looking for a heavy-duty CNC turning centre with very low hours. Key Features Hankook Protec 9NC 3000 2014 model Only 367 hours ! Flat bed CNC lathe 3 x steady rests included 3 Jaw and 4 Jaw Chucks Heavy-duty construction Suitable for a wide range of turning applications Low-hour machine Safety platform included Turning diameter over bed: Ø1150 mm Turning diameter over carriage: Ø830 mm Maximum turning length: 2845 mm Spindle bore: Ø105 mm Maximum turning weight: 5000 kg A very clean, low-hour example of a Hankook Protec 9NC 3000, complete with all three steady rests. Contact us for further information, photographs, specifications or to arrange an inspection.

Condition: used, Bridgeport Interact 1 CNC Knee Type Milling Machine with Heidenhain TNC 151 CNC Control, Table Travels X Axis 357mm, Y Axis 305mm, Z Axis Quill 127mm, Z Axis Knee 365mm, No. 30 Quick Change Spindle Taper, Spindle Speeds 40 - 4000rpm. S/No. 6484110887C Ndsdpfjzvcw Iex Almea Location: This lot is located in Burton-on-Trent. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Location: These lots are located in Burton-on-Trent, UK. Please see individual lot for loading information and charges. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2004, CNC lathe CNC turning machine Boehringer NG 180 Year of manufacture 2004 Ndjdpjzv Ec Tjfx Almja

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min control Siemens 840D weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm Ndsdpfx Aow Intaslmoa --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: used, Year of construction: 2010, operating hours: 62,569 h, functionality: fully functional, machine/vehicle number: 00410001121, spindle speed (max.): 5,000 rpm, overall weight: 5,695 kg, Equipment: documentation/manual, We are offering this used DMG CTX beta 500 V6 CNC turning and milling center, year of manufacture 2010. Serial number: 00410001121 Year of manufacture: 2010 Max. main spindle speed: 5000 rpm Max. counter spindle speed: 6000 rpm Weight: 5695 kg If you have any questions or require further information, please feel free to send us a message or call us. Ndsdpfx Aszv Tbqslmja

Condition: excellent (used), ROMI GL 240 2 Axis CNC Lathe Swing over Z axis cover mm 420 Maximum cutting diameter mm 300 Maximum cutting length mm 400 Travel (X axis) mm 188 Nsdpfx Aezu Nggslmsda Travel (Z axis) mm 400 Spindle nose ASA A2-5" Spindle hole diameter mm 58 Bar capacity (dia.) mm 51 Speed range rpm 6 to 6000 Rapid traverse (X & Z axis) m/min 30 Number of stations atc 12 AC spindle motor hp/kW 20/15

Condition: used, Nakamura - Tome TMC - 15 CNC Lathe with Nakamura - Tome Fanuc CNC Control, 16 Position Tool Turrret, LNS 6.42HS = 4.8 Barfeeder. S/No. 34545, Capacity Round Collet 34mm, Chuck Diameter 165mm, Swing Over Bed 300mm, Swing Over Saddle 170mm, Max Turning Diameter 180mm, Max Turning Length 250mm, Spindle Speed 135 - 4500rpm, Spindle Nose A2 - 5. S/No. 01908. Country of Origin: Japan Nsdpfxszvcrfj Almjda Please Note: Filtermist shown not included in this lot, can be purchased separately. Location: This lot is located in Burton-on-Trent. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2006, CNC Teach-in Lathe COLCHESTER Alpha 1350 XT Travel X: 245 mm Numerical Command FANUC Between points: 650 mm Maxi turning diameter: Ø 350 mm Spindle diameter: Ø 41 mm Max Rotation: 3500 RPM Turret: 8 tools VDI 30 Ndsdpfezwcpasx Almja Year of construction: 2006 Spindle motor: 5,5 kW 3 speed ranges Centralized lubrication pump Delivered with 2 3-jaws chuck Ø 160 mm Delivered with some tool holders (see photos) Voltage: 380 V Dimensions (L x W x H): 2500 x 2000 x 1900 mm Weight: approx 2 T Machine in very good condition

Condition: used, Year of construction: 1993, CNC Lathe REALMECA type T400 Travel X: 200 mm Travel Z: 600 mm Numerical Command: NUM 750 Between points distance: 700 mm Max machining diameter: Ø 210 mm Spindle speed: from 100 to 4000 RPM 12 tools Turret VDI 20 3-jaws chuck Ø 140 mm Year of construction: 1993 Spindle motor: FANUC Tailstock: CM4 Ndedozwcpgepfx Almsa Hydraulic Tailstock + Chuck Lubrification Voltage: 380 V Dimensions (L x W x H): 2500 x 1500 x 1700 mm Weight: approx 3 T

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 35001032, turning length: 40,000 mm, turning diameter: 890 mm, spindle motor power: 69,000 W, spindle speed (min.): 1 rpm, spindle speed (max.): 1,800 rpm, spindle bore: 122 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 260 mm, type of input current: three-phase, quill stroke: 140 mm, quill diameter: 120 mm, quill travel distance: 3,958 mm, spindle nose: A15, overall weight: 25,500 kg, spindle diameter: 200 mm, feed force X-axis: 10,000 N, feed force Z-axis: 22,000 N, distance between centers: 4,000 mm, Equipment: documentation/manual, For sale is a Heyligenstaedt Heynuflex turning and milling center, which is currently still in production. The machine is in operational condition and can be inspected under power and in operation until September 14, 2026. Machine type: Hn35U/4000 Flex Commission number: 35001032 Year of manufacture: 1994 Working area: - Turning length: 4000 mm - Swing diameter over bed: 890 mm Main drive: - Power at 100% duty cycle: 50 kW - Power at 50% duty cycle: 69 kW Main spindle: - Spindle diameter at the front bearing: 200 mm - Spindle bore: 120 mm - Spindle head shape: Shape A DIN55026 Gr15 - Speed range: - Gear stage 1: 1 – 540 rpm - Gear stage 2: 7 – 1800 rpm Feed: - Rapid traverse speed max.: 15 m/min - Planar feed: 0.5 - 5000 mm/min - Longitudinal feed: 0.5 - 5000 mm/min Tool carrier system: - Tool interface: Capto C8 - Linear travel range Y-axis: +/- 130 mm - Linear travel range X-axis: 980 mm - Tool magazine: 36 tools Tailstock: - Quill diameter/stroke: 125 mm / 140 mm - Axial force min/max: 16000/2500 N - Internal taper quill: MK 5 Ndodpfx Ajzwb Dpolmja Control system: - Type: Siemens 880T If you are interested or would like to arrange a viewing appointment, please do not hesitate to contact us.

Condition: used, machine/vehicle number: 008697, X axis working area: 3200 mm Y axis working area: 1250 mm Ndsdpfjzruzqsx Almea Main Electrospindle power: 6.5 KW Number of controlled axes: 4 axes Total number of drilling spindles: 43 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 008566, X axis working area: 3000 mm Y axis working area: 1300 mm Main Electrospindle power: 6.5 KW Ndjdpfjzvwprsx Almja Number of controlled axes: 3 axes Total number of drilling spindles: 82

Condition: used, CNC lathe INDEX ABC Ndodpjzwqtmefx Almoa

Condition: excellent (used), Year of construction: 1995, Maximum height 330 mm Distance between centers 2000 mm Working range: Maximum turning diameter over the bed cover 650 mm Maximum turning diameter over the bed slide 360 mm Main spindle: Spindle diameter in the front bearing 140 mm Spindle bore 107 mm Main drive 58.5 kW 2-stage speed range 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse X/Z axis 10/10 m/min Drum turret: Number of tool positions 12 Of which, driven tool positions 6 Cylindrical shank holder VDI 50 mm Dimensions / Weight: Footprint L x W x H approx. 6400 x 2150 x 2000 mm Weight 9400 kg Accessories / Special Features: • CNC path control HEIDENHAIN TurnPlus EP 90 with color screen • Spindle orientation C-axis • 12-position turret, VDI 50, of which 6 positions with driven tools in the turret, manufacturer SAUTER DIN 5482 B 20x17, max. speed 3000 rpm • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic tailstock with drag device • Hydraulic quill actuation • Air extraction system, manufacturer LTA • Various tool holders VDI 50 • CE compliant In 08/2025, GILDEMEISTER Service replaced the following parts: 1 servo motor, 1 AC servo controller power module for 2 axes, 1 power module Simodrive, 1 feed-in/feed-out module, 1 control module for 1 axis, 1 control module for 2 axes, inverter servo drive, 1 Simodrive power module (1-axis motor) Total repair costs: EUR 17,000.00 net Important NOTE: In this very well-maintained CNC turning and milling center GILDEMEISTER CTX 600-2000 (year of manufacture 1995), the C-axis positioning does not function. Otherwise, the machine is in perfect condition. Demonstration under power is possible at any time by prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Nodpfx Asx Sx Htolmjda

Condition: good (used), Year of construction: 2013, 480mm swing over bed, 257mm Swing over the Cross-slide, 1250mm between centres, 80mm spindle bore, Nedjzqr Hnspfx Almeda 25-2500rpm spindle, 7.5kW Spindle Motor, coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock.

Condition: good (used), Year of construction: 2019, 256mm maximum cutting diameter, 455mm max turned length, 4,000rpm spindle speed, 51mm bar capacity, 12 station VDI turret, milling speed 5,000rpm, 16kW spindle motor, Nsdpfxjzrfnuj Almeda Hurco WinMax 5 Control, tailstock, tool setter, swarf conveyor, parts catcher, Barfeed unit.