Used Cnc Bed-Type Milling Machine for sale (89,207)

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 3,000 rpm, overall weight: 10,000 kg, Heidenhain TNC 426 control Table: 1400 x 700 mm Travel: 1300 x 800 x 800 mm Spindle: SA 50 Maximum spindle speed: 3000 rpm Weight: 10,000 kg Dcedpfx Aszbrilsk Asp

Condition: used, Year of construction: 2001, x-travel 2000 mm y-travel 920 mm z-travel 900 mm table surface area 2200 x 750 mm table load 3 t number of T-slots 6 T - slots - width 18 mm T - slots distance 120 mm spindle taper ISO 50 DIN 69871-B spindle speed max. 3000 U/min transmission ratio 1 speeds infinitely variable range 1 60 - 3000 U/min weight of the machine ca. 21,6 t feeds longditudinal/cross/vertical 0 - 5000 mm/min rapid traverse 15000 mm/min total power requirement 38 kw weight of the machine ca. 11 t Dcsdpfx Akog E Utxo Aop Pull studs DIN69872-B | IKZ Hours: Control on: 43036 h Machine on: 41311 h Program run 13894 h The machine is already dismantled

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 4,000 rpm, table width: 1,000 mm, table length: 3,700 mm, spindle motor power: 28 W, SORALUCE TA-A 35 CNC milling and boring center, equipped with a HEIDENHAIN iTNC 530 HSCI numerical control system, an automatic milling head, and a 40-position tool changer. Technical specifications Manufacturer: SORALUCE Model: TA-A 35 Year: 2013 Numerical control: HEIDENHAIN iTNC 530 HSCI Longitudinal travel X: 3,500 mm Vertical travel Z: 1,250 mm Transverse travel Y: 1,200 mm Table dimensions: 3,700 × 1,000 mm Spindle power: 28 kW Spindle speed: 20 to 4,000 rpm Spindle torque: 479 Nm Spindle taper: ISO 50 / DIN 69871 A Rapid traverse rates: 25,000 mm/min Machine weight: approximately 18,500 kg Equipment and options Automatic milling head with 2.5° × 2.5° indexing Dcjdpfx Aez Nhzdok Aep Automatic 40-tool changer, with horizontal and vertical tool change HEIDENHAIN control with HR 410 electronic handwheel M&H 20.41-MULTI workpiece measurement system HEIDENHAIN TT 140 tool measurement probe Longitudinal chip conveyor Transverse chip conveyor Protective enclosure with access doors 3D thermal compensation Automatic centralized lubrication Preparation for the integration of a CNC dividing head

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, CNC control: HEIDENHAIN iTNC 530 (HSCI) with a 15.1" flat-screen display and a pivoting control panel 2. Work table / Clamping surface Length: 2,200 mm Width: 1,000 mm Maximum transport load: 7,200 kg Number of T-slots: 7 Size of T-slots: 22 H12 mm Reference slot: 22 H7 mm T-slot spacing: 140 mm 3. Automatic milling head (Option -AIH60A OIL) Design: Diagonal, swiveling in 2 planes Speed range: 0 – 6,000 rpm (Option) Tool holder: DIN 69871 AD (ISO 50) / Taper DIN 69871 Draw bolt: DIN 69872 Form A Tool clamping force: 15,000 N Lubrication: Automatic grease cycle lubrication (housing made of steel cast GS 60, designed for 45 kW and max. 2,000 Nm) 4. Main spindle drive motor / Manufacturer: Siemens, main spindle drive, Type: 1PH7 Drive power max. (Option): 36 kW from 376 rpm (standard equipment 30 kW) Maximum torque (Option): 930 Nm (constant up to 376 rpm; optional in gearbox up to 1,460 Nm or 1,750 Nm) Speed control / Gearbox: 3-stage (oil-cooled) with automatic switching and helical gears made of hardened chrome-nickel steel Spindle speeds (6,000 rpm Option): Low range: 0 – 984 rpm Medium range: 918 – 2,456 rpm High range: 2,404 – 6,000 rpm 5. Axis drives and axis feeds Axis drive motors: Manufacturer Siemens (digital AC drives) Rapid traverse max. (X/Y/Z axis): 15,000 mm/min Dodpfx Aez Tugbjk Ascp Working feed max. (X/Y/Z axis): 12,000 mm/min Feed force max. (X/Y/Z axis): 24,000 N Measuring system: Linear measuring system “Heidenhain” (0.001 mm) in all axes Machine weight: approx. 17,000 kg Connection power: approx. 54 kVA Materials: Machine bed, work table, machine frame and vertical slide made of lamellar graphite cast iron GG30; milling slide made of nodular graphite cast iron GJS-600 Guide rails: Hardened and ground with Turcite B sliding strip coating (in X/Y/Z) Hydraulic system: Manufacturer Rexroth (including hydraulic weight compensation in the vertical axis) Lubrication & cooling: Automatic central lubrication of axes/ball screws, control cabinet with lighting and air conditioning unit Additional control: Portable electronic handwheel “Heidenhain HR-410” with axis selection, additional electric foot pedal for manual tool change Enclosure & Safety: 4-sided splash guard enclosure with large sliding doors, safety switches (CE compliant) and safety fencing for the rear.

Condition: used, Year of construction: 1988, Bed milling machine Manufacturer: Correa Type: A16 Dcsdpfx Aozt U T Ajk Aep Year of manufacture: 1988 Control: HEIDENHAIN TNC415 Travel distances X/Y/Z: 1,800 x 800 x 800 mm Clamping area: 2,000 x 630 mm Workpiece weight: 3,000 kg Operating hours: 12,103 Power: 19 kW Spindle type: ISO 50 Dimensions L/W/H: 4,886 x 2,720 x 2,500 mm Machine weight: 7,500 kg 31126

Condition: used, Year of construction: 1980, functionality: limited functionality, machine/vehicle number: 4119, travel distance X-axis: 1,450 mm, travel distance Y-axis: 365 mm, travel distance Z-axis: 415 mm, total width: 3,400 mm, total length: 4,200 mm, overall weight: 3,500 kg, Last major overhaul in 2006 Swiveling spindle head, 360° Dcsdpfxoz Nfbzo Ak Aop Control: Digital display Clamping area: 1800 x 400 mm Table load: 1000 kg Travel in the longitudinal direction: 1450 mm Travel in the transverse direction: 365 mm Travel in the vertical direction: 415 mm Spindle connection: SK40 Spindle speed: 31.5-45-63-90-125-180-250-355-500-710-1000-1400 rpm Feed rate in the longitudinal direction: 8-1200 mm/min Feed rate in the transverse direction: 8-1200 mm/min Feed rate in the vertical direction: 4-600 mm/min Spindle drive: 7.5 kW Feed motor: 3.2 kW Coolant pump: 0.18 kW Hydraulic system: 0.37 kW Total connected load: 12 kVA Weight, approx.: 3500 kg Space requirement, approx. (L x W): 4200 x 3400 mm Technical data subject to change without notice. Errors and prior sale excepted.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table length: 4,000 mm, table width: 1,500 mm, table height: 300 mm, SHW PowerSpeed 5 Travel ranges • X-axis (bed): 4,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (spindle head horizontal): 1,300 mm Control system • CNC control: Heidenhain iTNC 530 Feed rate • X, Y and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Swiveling range of milling head mount: 360 x 1 degree • Swiveling range of milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Briefly 36 – 6,000 rpm Automatic tool changer • Tool magazine for 48 tools Clamping plate • Clamping area: 4,000 x 1,500 mm Chip conveyor • Collection length: 4,000 mm Dcsdpfo Af Ig Hjx Ak Asp Coolant system • Tank capacity: 500 l Splash and chip guard • 1-sided, with 2 sliding doors, manually movable About MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among other things, the supply of spare parts, on-site customer service, machine overhauls and control system modernization. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization ----- _____ Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - milling machine used - used CNC milling machine - used boring and milling machine - used metal milling machine - used metal milling machine - used CNC milling machine - CNC milling machines - milling machine - large part machining - large-part machining - large part machining - CNC large part machining - milling - shw - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: used, Year of construction: 2017, operating hours: 21,000 h, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 15,000 rpm, spindle speed (min.): 20 rpm, table width: 1,100 mm, table load: 1,200 kg, table length: 3,200 mm, CNC Bed Milling Machine Manufacturer: DMG MORI Model: DMF 260-11 linear Year of manufacture: 2017 Control: Celos with Siemens 840D sl Operate Main spindle renewed Technical specifications: Travel distances: - X-axis travel: 2,600 mm - Y-axis travel: 1,100 mm - Z-axis travel: 900 mm Main spindle: - Speed range: 20 - 15,000 rpm - Drive power (40/100%): 46 / 30 kW - Torque (40/100%): 200 / 130 Nm - Tool holder: SK 40 Worktable: - Fixed table with integrated rotary table - Clamping surface: 3,200 x 1,100 mm - Rotary table diameter: 1,050 mm - Max. table load: 1,200 kg Tool changer: - Number of tool stations: 60 positions - Chip-to-chip time: 7.5 s - Power-on hours: approx. 21,000 h - Operating hours: approx. 9,200 h Technical features: - ICS (internal coolant supply) 40 bar - Coolant spray gun - Rotating viewing window - Tropical package - Dynamic package Accessories: Dodpfx Ako Agr A Us Ascp - Paper band filter 600l - Chip conveyor - Heidenhain TS 649 DMG touch probe - 3D quickSET - 2x Oil and emulsion mist separators - 4-color signal lamp - Electronic handwheel Accessories, pictured tools, and clamping devices are only included in the scope of delivery if noted in the additional information.

Condition: used, Year of construction: 2004, Technical details: x-travel: 2700 mm y-travel: 1000 mm Dcedpjz Egckjfx Ak Aop z-travel: 1050 mm T-slots: 7x22 feed speeds: 10000 mm/min - Pallet Diameter : 3.300x1.000 mm - Max. Feedrate X/Y/Z: 10.000 mm/min *

Condition: used, Year of construction: 1986, longitudinal travel 1200 mm vertical movement 600 mm cross travel 450 mm table-size 1500 x 600 mm Dcodpfxjxukpps Ak Aop max. table load 2 t spindle taper ISO 50 spindle drive 15 kW speeds 6 - 4000 U/min feeds 2 - 2500 mm/min rapid traverse 10 m/min voltage 400 V Bed milling machine with swivable spindle to horizontal or vertical. Control: Heidenhain TNC 155. Machine has an additional horizontal 4th axe.

Condition: ready for operation (used), Travel X/Y/Z: 1400mm/1000mm/1000mm, table dimensions X/Y: 1600mm/850mm, max. table load: 2500kg, speed: 4000rpm, spindle power: 22kW, feed: 20m/min, spindle taper: ISO50. Machine dimensions X/Y/Z: approx. 4300mm/2500mm/2600mm, weight: approx. 10000kg. An on-site inspection is possible. Dcjdpfjy Hk Uljx Ak Asp

Condition: excellent (used), Huron SXB 523 CNC Bed Milling Machine Heidenhain CNC control Djdpfx Akjz Hdvke Ascp Year 1991 Table 110" / 2794mm x 24" / 609 7,716lbs / 3499kgs max table load 78.7" / 1998mm X travel 59" / 1498mm Y travel 33.5" / 850mm Z travel 30-3000RPM spindle 30 ATC 3 Axis

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 16,000 m/min, feed rate Y-axis: 16,000 m/min, feed rate Z-axis: 16,000 m/min, spindle speed (max.): 4,000 rpm, table width: 900 mm, table load: 10,000 kg, table length: 2,700 mm, total height: 3,440 mm, total width: 6,000 mm, total length: 7,000 mm, overall weight: 24,000 kg, power: 38 kW (51.67 HP), CNC Bed-Type Milling Machine Djdpfjy Ew Susx Ak Ajcp Ki-Heung - U1050 MACH-ID 9598 Make: Ki-Heung Type: U1050 Control: HeidenHain iTNC530 Year: 2014 A4 Automatic head 2.5 x 2.5 Degrees Drum AC 24 positions HeidenHain iTNC530 HeidenHain HR-410 Wandwheel Flatt guideways / High Ridgid machine  Oil Chiller Covered CE-Doors X-Axis: 2500mm Y-Axis: 1050mm Z-Axis: 1600mm Table Length: 2700mm Table Width: 900mm Table load: 10000 Power on spindle: 38kW Spindle speeds: 4000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 16000mm/min. Feed rate Y-Axis: 16000mm/min. Feed rate Z-Axis: 16000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 7000mm Width: 6000mm Height: 3440mm Weight: 24000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1970, x-travel 3000 mm y-travel 1350 mm z-travel 1400 mm spindle taper ISO 50 turning speeds 22-1400 U/min Rotary table 800x600 mm Table dimensions 2500x1200 mm Feed 5-3000 mm/min ball screw The tech. Data are manufacturer or operator information and therefore non- Dsdpfx Akoyqu Rqe Ascp binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1998, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, overall weight: 9,000 kg, input voltage: 380 V, power: 29 kW (39.43 HP), We are offering this used Correa CF22/20 bed milling machine, manufactured in 1998, for sale. Model: CF22/20 Serial number: 9671801 Year of manufacture: 1998 Power: 29 kW Voltage: 380 V Air pressure: bar Dcsdpfx Aksz Sr Uaj Aop Weight: 9000 kg If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2004, operating hours: 31,350 h, Bed milling machine Make: ANAYAK Model: VH Plus 4000 Year of manufacture: 2004 Spindle hours: approx. 31,500 hours Dcedey Uy Ecspfx Ak Aop Control: Heidenhain 530 Table size: 4200 x 1100 Travel: x: 4000, y: 1200, z: 1500 mm Max. spindle speed: 5000 rpm Max. feed rate: 10000 mm/min Pick-up location: Bremen The machine is in daily use, so operating hours will continue to increase. An inspection can be arranged at any time. Disassembly, loading, etc. are the responsibility of the buyer. A 2-ton forklift and a 5-ton overhead crane are available for "small parts." _____ Subject to prior sale and errors in the technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: used, Year of construction: 2010, x-travel 2600 mm y-travel 1100 mm z-travel 900 mm control Heidenhain iTNC530 spindle turning speed range 0-10.000 U/min tool taper SK 50 Tool magazine slots 30 St./pcs. table surface area 3200 x 1100 mm max. table load 1200 kg Dcedpfx Ake Ah T Udj Aop rotary table dia. 1050 mm weight of the machine ca. 25550 kg Features/Accessories: -IKZ 40 bar -electric handwheel -technical documentation

Condition: like new (used), Year of construction: 1996, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 6000 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 6000 mmY axis traverse: 3800 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm (direct exit)Distance between columns: 3100 mm Milling head Universal head UM40 (Body B: manual / Body C: 3º auto-indexing) Direct spindleTool clamping system: HydraulicTaper nose: ISO50 (DIN-69871)  /  Pull stud: DIN-69872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7000 / 12000 mm/min Weight and dimensions Maximum weight on table: 15000 kgMachine weight approximate: 50000 KgMachine dimensions approximate: 14740 x 5330 x 5050 mm Accessories Guarding: 2 sliding doors with a new perimetral wire-mesh safety fenceHead changer: automatic with lateral hinge/support in columnChip conveyor: 2 longitudinal palletsElectronic handwheel: New HR-510Coolant: External Internal high pressure through spindle (internal only with direct exit head) Sale conditions Warranty: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features Dcodsyf Rr Tepfx Ak Aep

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: 52334, travel distance X-axis: 2,750 mm, travel distance Y-axis: 1,060 mm, travel distance Z-axis: 1,550 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 1,060 mm, feed length Z-axis: 1,600 mm, rapid traverse X-axis: 7,000 m/min, rapid traverse Y-axis: 7,000 m/min, rapid traverse Z-axis: 7,000 m/min, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, spindle speed (max.): 1,600 rpm, spindle speed (min.): 5 rpm, table width: 900 mm, table load: 8,000 kg, table length: 3,000 mm, mount diameter: 1,200 mm, table height: 600 mm, total height: 2,850 mm, total width: 2,450 mm, total length: 4,900 mm, type of input current: three-phase, rotational speed (max.): 1,600 rpm, rotational speed (min.): 5 rpm, workpiece weight (max.): 8,000 kg, overall weight: 16,000 kg, Equipment: rotational speed infinitely variable, ZAYER BF3 3000 HEIDENHAIN TNC150 ZAYER BF3 3000 HEIDENHAIN TNC 155 €7,000 each Dcedpoyn Ir Ajfx Ak Aop 3 fully functional machines can be inspected upon request. I also have 2 Nicolas Correa A10 machines, along with other machinery and equipment for the industry. Magnetic tables are not included.

Condition: used, Brand and Model: CORREA CF 22/25 Cnc: HEIDENHAIN TNC 426 Type: BED TYPE Table dimensions: 2500x700 mm Max allowed weight on table: 4000 kgs Dodpfszq Rzqsx Ak Aecp Traverses (X,Z,Y): 2500x800x800 mm Milling head model: U22 manual Spindle cone: ISO 50 Speed range: 4000 rpm Power: 22 kw Feedrates: 5-5000 mm/min Rapid traverses (X,Y,Z): 12000 mm/min Machine weight: 9500 kgs Machine dimensions: 6400x3345x2800 mm Machine equipped with: -Optical encoders on the X,Y,Z axes – Electronic wheel – Hydraulic cone clamping pedal

Condition: excellent (used), operating hours: 8,064 h, Brand : LAGUN Model : GBM-22E Dcodpeyg R Abofx Ak Ajp Type : CNC 5 EJES Cnc :HEINDENHAIN 530 Table dimensions : 2.200 x 1000 mm Number and width of T slot: 7 x 22 mm Distance between T slots: 140 mm Axis travels (X,Y,Z) : 2.000 x 1.200 x 1.000 mm Head type : Automático Spindle speed : 4.000 rpm Taper : ISO 50 DIN 2080 Main motor : 28 kw Continuusly variable speeds : 50➗ 4.000 Speed range : 2 Rapid traverse : 10.000 mm/min Machine weight : 15 tn Electronic hand-wheel : Yes Working hours : Machine running: 22.924 h Control on : 23.132 h Automatic cycle: 8.064 h

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,000 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, table load: 6,000 kg, rotational speed (max.): 5,000 rpm, workpiece weight (max.): 6,000 kg, ANAYAK VH 3000 Plus bed milling machine for sale. The machine is fully functional and can be inspected while in operation. Functional videos are also available upon request. It was mainly used for machining aluminum and plastic (tool and fixture construction). Very smooth operation and excellent dimensional accuracy! - Year of manufacture: 2005 - Spindle hours: 42,000 - Manufacturer: Anayak - Model: VH 3000 Plus - X-axis: 3000 mm - Y-axis: 1700 mm - Z-axis: 1500 mm - Max. spindle speed: 5000 rpm - Table length: 3200 mm - Table width: 1100 mm - Table load: 6000 kg Dedpfsz Ig Npox Ak Aecp - Spindle taper: ISO 50 - Spindle motor power: 22 kW Disassembly and loading can be arranged for an additional charge. Please do not hesitate to contact us if you have any questions.

Condition: good (used), Year of construction: 2003, INTOS Žebrák FN 20 Universal milling machine + accessories Dcsdpfxszgu T As Ak Aop Manufacturer: INTOS Žebrák Type: FN 20 Condition: used Year of construction: 2003 Weight of the machine: 910 kg Dimension: - Length mm: 1690 - Width mm: 1270 - Height mm: 1175 Clamping surface of the vertical table: 216 x 680 Clamping surface of the angled table: 240 x 600 Width and distance of the T-slots mm: 12H8 x 45 0.1 Spindle diameter in the front bearing mm: 45 Spindle taper: ISO 40 Spindle speed: 18 RPM range: 50 - 2000 Feed rates : 18 Range mm: 8 - 400 Rapid feed mm/min: 1340 Movement of the headstock: - manually: 200 - independently: 190 Achieved by adjusting the holder Design mm: 42 Longitudinal table movement: - manually mm: 300 - independently mm: 290 Vertical movement of the table: - manually mm: 350 - independently mm: 340 Scope of delivery: - INTOS Žebrák FN 20 universal milling machine - accessories - operating instructions

Condition: used, Year of construction: 1999, functionality: unexamined, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,050 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 60 rpm, table width: 1,100 mm, table load: 8,000 kg, table length: 2,300 mm, Bed milling machine Anayak VHPlus 2000 Travel: X: 2,000 mm Y: 1,200 mm Z: 1,050 mm 45° universal milling head Spindle: SK50 Power: 30/35 kW Spindle speed: 4,000 rpm Coolant system Tool changer: 30 positions, chain magazine Control: Heidenhain TNC426 Electronic handwheel Dcjdex Ndcuopfx Ak Aep Export documentation and shipping available at extra cost. Machine can be inspected under power. We will gladly send you further details or arrange an on-site inspection.

Condition: used, Year of construction: 1999, Technical details: x-travel: 2000 mm y-travel: 1500 mm z-travel: 1460 mm milling spindle motor: 35/30 kW spindle taper ISO: 50 spindle turning speed range: 24 - 3000 U/min table surface area: 1350 x 1550 mm table load: 6 t feed speeds: 10 - 3000 mm/min Dcjdpjv Rdzbjfx Ak Ajp rapid speed: 10 m/min total power requirement: 48 kW weight of the machine ca.: 24 t CNC HEIDENHAIN TNC 426 B-axis table round Horiz. and Vertikal automatic positioning Milling Head diverses accessories *