Used Cnc Drilling Milling Machine for sale (91,944)

Condition: used, Year of construction: 1990, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table-size 680 x 380 mm CNC control 432 PHILIPS feed range 1-3000 mm/min Djdpou Rt Nrsfx Ah Ujwd rapid traverse 6 m/min Tool bore ISO 40 turning speed range 20 - 3150 U/min main drive DC 5 kW milling head -swivable +/- 90 ° total power requirement 12 kW weight of the machine ca. 1,2 to dimensions of the machine ca. 2,5 x 2 x 2 m CNC milling machine with 432 Control.

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Dwodpfx Ahjwuz Eke Uod Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BCOR12150, BIESSE BREMA EKO 902 CNC and vertical dowel insertion machine for reduced cycle times Equipment Features - Clamping grippers measure the thickness to adjust drilling depth - Laser-based measuring system for detecting the front and rear panel edges - Length tolerance compensation correcting the workpiece length in X - 5-position tool changer - Drilling head with individually retractable spindles and grooving saw - Diameter: 120 mm - Gluing and dowel insertion units mounted on Y and Z axes Options - 4.5 kW electrospindle; 18,000 rpm - Special drilling unit for hinges Technical Data - Panel length: 160 - 3200 mm - Panel width: 35 - 900 mm - Panel thickness: 8 - 80 mm - X/Y/Z axis speed: 100 / 60 / 30 m/min - X axis travel: 3200 mm - Y axis travel: 900 mm - Main spindle power: 4.5 kW - Number of controlled axes: 3 axes - Number of drilling spindles: 20 Dwedsw Nytnopfx Ah Uod - Number of tool positions: 5

Condition: good (used), Year of construction: 2004, functionality: fully functional, x-travel 620 mm y-travel 420 mm z-travel 400 mm Dsdpjwzv R Usfx Ah Uowd table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 rpm main drive motor 5,5 kW weight of the machine approx. 2,1 t * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: good (used), Year of construction: 1996, CNC Milling Machine Hermle UWF 902H + Renishaw probe + 34-position tool changer The horizontal spindle was defective and has been removed! Dedjw U Dvqjpfx Ah Ujwd Year of manufacture: 1996 Control: Heidenhain TNC 426 Spindle hours: approx. 9,000 Operating hours: approx. 60,000 Spindle: SK40 Speed: 20 - 6,300 rpm Travel: X 600 / Y 450 / Z 500 mm Table: 600 x 450 mm Total power requirement: 16 KVA Dimensions (approx.) LxWxH: 300 x 220 x 230 cm Weight: approx. 5 t

Condition: like new (used), Year of construction: 2007, Retrofitted: 2024 Numerical control: HEIDENHAIN TNC-i530 Dwsdpfougbn Eox Ah Uod Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): -10 / 990 mmDistance between columns: 2435 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10975 x 4768 x 5095 mm Accesories GuardingAutomatic tool changer: ATC30Coolant: External internal high pressure through spindleElectronic handwheel: HR-410 Sales conditions Guarantee: 6 months mechanical spare partsSale price (Ex Work): On request View all technical features

Condition: used, Year of construction: 1983, functionality: fully functional, ACIERA - 22 S 2-1 E Listing Details Stock number: 1039-9393 Machine type: Column drilling machine Manufacturer: ACIERA Model: 22 S 2-1 E Year of manufacture: 1983 Control system: — Location: D-59302 Oelde Country of origin: Switzerland Delivery time: by arrangement Freight terms: ex location Additional information: Column Drilling Machine ACIERA - 22 S 2-1 E - Only 523 operating hours WE OFFER YOU: - Workshop-tested machines - Free loading onto truck - NO auction fee - Delivery possible (at extra cost) - Unloading and commissioning (at extra cost) Technical Details Speed range: 40 - 3,600 rpm Dwjdpfx Ahext N Tqs Ujd Drilling stroke: 105 mm Spindle taper: MK Arm reach: 250 mm Gear stages: 2x Table clamping surface: 660 x 320 mm T-slots: 3x T-slot pitch: 100 mm T-slot width: 18 mm Total power requirement: 2 kVA Machine weight approx.: 720 kg Required space approx.: 1.2 x 1.0 x 1.8 m

Condition: used, machine/vehicle number: 008134, X axis working area: 5780 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Total number of drilling spindles: 32 Total number of tool changer positions: 28 Dwsdpow Idgijfx Ah Usd

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Dwodpfx Aoxtmqtjh Uod Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2009, Working hours (dated April 2025): - Machine on: 34.320 h - Control on: 23.218 h - Auto. cycle: 11.987 h * CNC control HEIDENHAIN iTNC 530 * Electronic handwheel * Automatic universal milling head (overhauled in 2018), 2.5 / 2.5 deg. indexing * Coolant device with paper band filter * Cooling through the spindle * Chip conveyor * NC rotary table YRT F 1000/1250 (4th axis): Dwedpew Icccsfx Ah Ued - Diameter 1250 mm - Max. load 3500 kg - Overall height 265 mm - Table top thickness 125 mm - Partial accuracy +/- 2.5" x-travel 2500 mm y-travel 1600 mm z-travel 1200 mm Table dimensions 2860 x 1200 mm tool taper ISO 50 spindle turning speed range 20 - 3000 rpm max. torque on the spindle 700 Nm feed range 2 - 10000 mm/min rapid traverse 25 m/min spindle motor 32 kW weight of the machine approx. 25,0 t

Condition: good (used), Year of construction: 1998, operating hours: 17,260 h, Table size: 1000 x 500 mm Tool holder DIN 2080: ISO 40 Travel distances: X-axis: 800 mm Y-axis: 500 mm Z-axis: 420 mm Distance between horizontal spindle axis and table: 210 – 630 mm Distance between vertical spindle nose and table: 130 – 550 mm Table load capacity: max. 500 kg Spindle speed range: 50 - 4000 rpm Infinitely variable feed rate: 5 - 2000 mm/min Rapid traverse on all axes: 8 m/min Swiveling vertical milling head: ± 90° Manual quill stroke adjustment: 80 mm Drive power: 7.5 kW Dimensions L x W x H: approx. 3000 x 2400 x 1975 mm Weight: approx. 3000 kg Accessories / Special features: • CNC contouring control HEIDENHAIN TNC 410 • HEIDENHAIN HR 410 electronic handwheel • SIEMENS AC servo drives • Data interface V 24/ RS 232 • Swiveling vertical milling head ± 90° right & left with quill adjustment • Hydraulic tool clamping vertical + horizontal SK / ISO 40 • Swiveling device for vertical milling head • High speed range up to 4,000 rpm • Vibration-free operation due to stable and heavily ribbed cast-iron guides • Ball screws for X, Y, and Z axes • All electrical controls located on one side in movable control panel • Fixed angular table with foldable chip guard • Coolant system integrated in machine base • Hydraulic unit • Central lubrication • CE-compliant Djdpfjxtu H Nox Ah Uowd Operating hours: 17,256 Spindle hours: 3,816 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Brand: CORREA Model CF-17 Cnc : HEIDENHAIN 360 Table size : 2000 x 700 mm Number of T-slots: 5 x 22 Distance between T-Slots: 125 mm X axis Travel : 2000 mm Y axis travel : 800 mm Z axis travel : 800 mm Rapid traverse: 12.000 mm Spindle nose: ISO 50 Diameter of front bearing : 85 mm Turning ranges : 20-2750 rpm Range : 5-5000 Dwedpfxjxcy D Se Ah Ujd Spindle power : 17 kw Max. Weight carrying on table : 3.500 kg Machine weight: 9.000 kg

Condition: good (used), Year of construction: 2017, m. control PC Dedpfx Ahjxt Nl Tj Uewd +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 1994, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -Manufacturer: Knuth, CNC tool milling machine type WF 5 NC -Clamping table: 800 x 330 mm -Travel: X/Y/Z 400/330/440 mm -Spindle holder: SK40 -Quill stroke: 60 mm -Speeds from: 63 to 3150 rpm -Coolant system Dwodpfjwyivnsx Ah Usd -Accessories: including extensive accessories see photos -Dimensions: Machine: 1500/1345/H1900 mm / Control cabinet 750/450/H1730 mm -Total weight: 1960 kg

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, table width: 450 mm, table length: 1,530 mm, table load: 350 kg, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Dodpfx Asxtbkueh Uewd Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2009, In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation x-travel 4000 mm y-travel 1350 mm Dsdpfxjw Hfm Ao Ah Uewd z-travel (Vertical) 1600 mm table surface area 4200 x 1150 mm table load 13 to tool taperISO 50 spindle turning speed - stepless 0 - 3000 rpm Gear steps 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine approx. 37 to dimensions of the machine approx. 12,9 x 6,53 x 3,79 m

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Dedexrahcopfx Ah Uswd Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders

Condition: ready for operation (used), Year of construction: 2000, General Data Machine weight 3500 kg Movement X-Axis Movement 8000 Y-Axis Movement 500 Z-Axis Movement 220 This 3-axis Tekna TK 427/8 CNC milling machine was manufactured in 2000. It features a substantial travel range with 8000 mm on the X-axis, 500 mm on the Y-axis, and 220 mm on the Z-axis, weighing 3500KG. If you are looking to get high-quality milling capabilities, consider the Tekna TK 427/8 machine we have for sale. Contact us for more information about this machine. Dsdpfxjxqtb Hj Ah Ujwd Application Types Milling

Condition: used, Year of construction: 2015, Serial no. 72.83.015, control system by Heidenhain, type ITNC530, 5 axes, travel range X/Y/Z 1,350 x 1,170 x 700 mm, swiveling spindle, CNC rotary table, electrospindle by Steptec, maximum speed 24,000 rpm, 3-way pallet changer, pallet size 1,000 x 850 mm, 238-position tool magazine, 5 levels, HSK 63 tool holder, belt filter by BMF, ICS (internal coolant supply), cabin, infrared probe by Renishaw, tool and accessory package: tool container, 4 drawers, single-door, 2 table trolleys, telescopic drawer cabinet with 11 drawers, contents: HSK 63 tool holders, FCS Breil zero-point clamping system, 3 grid plates, 25 mm hole pattern, setup tools, accessories. Dwjdjxug Diepfx Ah Ujd

Condition: used, Year of construction: 1990, Weight . kg Dwodpfsud Tr Rjx Ah Uod Year . content Rubintastkopf cbm

Condition: ready for operation (used), total height: 3,300 mm, total width: 3,450 mm, total length: 6,000 mm, controller manufacturer: Siemens, empty load weight: 17,000 kg, Model: FTV 850 Koeling door spindel Het werkgebied kan in twee secties worden verdeeld Dodpfx Aewxz D Ueh Uowd 2 magnetische tafels Bewegende kolom, vergelijkbaar met Mazak VTC / Unisign / Hedelius Zware chassisstructuur Longitudinal travel X-axe: 1800 mm Crosstravel Y -axe: 850 mm Travel Z-axe (Height): 800 mm Dimensions clamping space - table: 2300 x 900 mm Universal (2x 360°): ISO 50 Boring head (1 x90°): 19 kW

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Ficep 1201 DE Excalibur drilling machine for processing flat steel and profiles with longitudinally moving drilling unit. This machine has been completely cleaned and checked. The drilling machine has a numerically controlled, longitudinally moving drilling unit, X-axis, adjustment 0 - 15,000 mm, automatic tool change system with HSK A80 holder for 6 tool positions. Thanks to the 19 kW drill spindle drive, the drilling machine is suitable for use with carbide drilling tools. Technical details: Profiled and flat steel support with guide rail with fixed table Total length 15 m. Mobile drilling unit for longitudinal positioning on workpieces. Horizontal drill head with one drill spindle Additional drill chuck storage in X-axis direction Clamping device for securing material Position detection device Profile size - max.: 1200 x 1200 mm Number of drill spindles: 1 pc. Drill diameter: 5 - 40 mm Thread cutting: M6 - M30 Dodpev Iamzsfx Ah Ujwd Drill spindle speed: 180 - 3000 rpm Holder: HSK A 80 Tool changer: 1 x 6 For further information, please contact us

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Dwedpeu Dahnefx Ah Ujd Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Year of construction: 2012, condition: excellent (used), Machine equipment with 2 working fields. 2 workpieces can be inserted independently of each other. Workpiece dimensions - length 110 - 800 mm - width 20 - 1700 mm - height 14 - 60 mm - Working height 900 mm Dwedpfx Ahomrqrij Ued Machine structure - 1 x horizontal drilling station 0,9 kW. Drill speed 7.200 rpm - drilling depth max. 30 mm - Drill depth 10 mm - total drill length 85 mm - 2 x glue application and dowel insertion station - 2 x dowels, dowel projection 15-20 mm - dowel center distance 96 mm - 2 x oscillating conveyor dowel - 1 x glue pump 18:1 - 2 x electronic glue control ELC - workpiece support table 1700 mm - 8 x workpiece clamping cylinders - Center stop for 4 working fields - Central lubrication with hand pump for grease lubrication - NC positioning of the height adjustment of the drilling and doweling station (Z-axis) - axis with position control, travel speed 12 m/min KOCH Numeric positioning control with 1 NC axis (X)

Condition: used, Year of construction: 2007, Control, make Selca, type S40-45DH, 7 axes (X/Y/Z/W/V/B), rotary table 1,000 x 800 mm, travel X/Y/Z 1,650 x 1,000 x 380 mm, W 500 mm, V 1,000 mm, B 360x0.001°, drilling diameter 6–22 mm, drilling spindle 9 kW, max. speed 4,200 rpm, milling spindle 9 kW, max. speed 2,000 rpm, 20-position tool changer, tool holder ISO40, oil mist extraction, make Sey, cooling unit, make Eurocold, type Ecological Line, chip conveyor, tool and accessory package, workbench, small workbench, tool trolley, 6 drawers, WTS rack, 4 levels, contents: setup tools, 70 tool holders SK 40, 1 lot of deep hole drills Dedpfx Ahexugydo Uowd