Used Cnc Gear Hobbing Machine for sale (100,339)

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Dkedpfx Aeum H Ekjh Uow Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 13

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25653, Equipped with: -Automatic Central Lubrication System -Machine Guard -Indramat - MTX and Sercos CNC Control -The standard machine is equipped with CNC-control make Indramat - MTX and SERCOS-interface -Tool Dressing (Automatic dressing cycle of the dressing master and honing wheel tip diameter by a diamond coated dressing roll. The dressing cycle of workpieces can be pre-selected) -Electronic Indexing Unit -Operator and Maintenance Manual -All Electrical Drawings -PLC Language in English -Software and Hardware for Remote Diagnosis -High Precision Control of the Stock Allowance Material -Manual Loading on Spindle for Prototypes -Software for Infeed Optimized Cycle Type Reduction (Adaptive Honing) -Software for Vario Speed Dressing -Software for Calibration of Master Gears -Software for Timing Gears (including additional sensor for the hole of 4mm) -Software for Shortening of Workpiece Change-Over Time -Clamping Cylinder -RITTAL Cooling Unit -Lighting for Working Area -Installation of Vibration Detecting Sensors -Coolant Unit -Electrostatic Oil Mist Exhauster IFS With Rigid Piping -Internal Automation -Pallet Ring Conveyor System FlexLink (L-form shape see approved layout) -Parallel - Double Gripper -Pick and Placer Between Pallet Conveyor and Internal Loader -Extended Loading Length of the Pick and Placer Specifications: Workpiece: -Part Diameter: 20-150 mm -Maximum Face Width: 70 mm -Part Weight: 20 kg -Number of Teeth: 6-150 -Module: 1-5 mm Workpiece Spindle: -Maximum Speed: 6000 1/min Dkjdpow Iquyofx Ah Usw -Installed Power: Approx. 25 kW Tool: -OD of Honing Wheel: 270 mm -Widths of Honing Wheel: 20-70 mm -Honing Wheel Material: Ceramics Tool Spindle: -Maximum Speed: 2000 1/min -Installed Power: Approx. 25 kW Machine: -Total Connected Load, Approx: 70 kVA -Floor Space (w x l x H): -Total Weight, Approx: 11 Ton -Bosch Rexroth MTX Control CML 85 Longitudinal Slide, Z-Axis: -Linear Drive -Drive Torque: 3,700 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 400 mm Cross Slide, X-Axis: -Linear Drive -Drive Momentum: 2,150 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 1050 mm Swiveling Axis, W-Axis: -AC-Servo Drive: 10,000 1/min -Setable Gear Transmission: i=5000:1 -Swiveling Angle: -90 Degrees / +16 Degrees Workpiece Spindle, C-Axis: -Direct Drive, Maximum RPM: 7,000 1/min -Drive Power: 30 kW -Drive Torque: 112 Nm -Digital Measuring System Tool Spindle, B-Axis: -Direct Drive (hollow spindle drive), Maximum RPM: 2000 1/min -Drive Power: 30 kW -Drive Torque: 150 Nm -Digital Measuring System

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BCOR12150, BIESSE BREMA EKO 902 CNC and vertical dowel insertion machine for reduced cycle times Equipment Features - Clamping grippers measure the thickness to adjust drilling depth - Laser-based measuring system for detecting the front and rear panel edges - Length tolerance compensation correcting the workpiece length in X - 5-position tool changer - Drilling head with individually retractable spindles and grooving saw - Diameter: 120 mm - Gluing and dowel insertion units mounted on Y and Z axes Options - 4.5 kW electrospindle; 18,000 rpm - Special drilling unit for hinges Technical Data - Panel length: 160 - 3200 mm - Panel width: 35 - 900 mm Dksdpfx Ahew Nytno Usw - Panel thickness: 8 - 80 mm - X/Y/Z axis speed: 100 / 60 / 30 m/min - X axis travel: 3200 mm - Y axis travel: 900 mm - Main spindle power: 4.5 kW - Number of controlled axes: 3 axes - Number of drilling spindles: 20 - Number of tool positions: 5

Condition: good (used), Year of construction: 2003, max. ram stroke 100 mm max. module 8 table diameter 400 mm workpiece diameter 600 mm strokes per minute 80-1200 Hübe/min Feed radial axis from - to 1 - 3750 mm/min angle adjustable from - to - 0,5 / + 0,5 Grad Accessories: - Various tool holders - Various clamping devices Dsdovfwuqjpfx Ah Uokw - Documentation

Year of construction: 2000, condition: used, machine/vehicle number: 30336, Article number: MA999 Manufacturer: Noble Type: Micromat 203 Year of construction: 2000 Dkjdpfx Aodacqhjh Uew Machine number: 30336 Control: CNC he 1904 Length [mm]: 1500 Width [mm]: 1250 Height [mm]: 1650 Weight [kg]: 1600 Power supply: 380V Working hours [h]: 1858 Positioning range x/Y/Z [mm]: 760 X 310 Cutting force [to]: 20 2 piece of multimedia tools / 3 x / 6 x with various tools Accessories: manual / schematics

Year of construction: 2007, condition: good (used), MAKE - LVD, Made in USA/BELGIUM MODEL - GLOBAL 20 1225 YEAR - 2007 CONTROL - FANUC 180I - PB CAPACITY - 20 Tons THROAT DEPTH - 1250.0 mm SHEET SIZE MAX. - 2500.0 x 1250.0 mm (1250.0 x 5000.0 mm) MAXIMUM WORK PIECE WEIGHT - 150 Kg MAXIMUM MATERIAL THICKNESS - 6.0 mm MAXIMUM TABLE SPEED - 0 – 4330.0 TURRET - 30 STATIONS, 4 AUTO-INDEXING MAXIMUM PUNCHING DIAMETER - 89.0 mm PUNCHING SPEED - 350 STROKES/MIN NIBBLING SPEED - 900 STROKES/MIN PRESS MOTOR POWER RATING - 460V 3 Phase Motor DIMENSIONS - 5560.0 x 5560.0 x 2400.0 mm WEIGHT - 16,000 Kg PLUS BRUSH TABLE VERY LOW HOURS Djdpfxeiab Epe Ah Uekw GOOD RANGE OF TOOLING

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Y axis working area: 1550 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Dkedpfshwi U Tex Ah Uew Total number of drilling spindles: 10 Total number of tool changer positions: 8

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Djdperualpjfx Ah Uekw Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: excellent (used), Year of construction: 2010, travel distance X-axis: 2,000 mm, travel distance Y-axis: 960 mm, travel distance Z-axis: 800 mm, table width: 900 mm, table length: 2,400 mm, table load: 4,000 kg, Rigid construction for Heavy Duty jobs Direct drive powerful processing in 2 stage gear drive Fully covered machine Dedpfx Aoxbd Ryeh Uekw Distance spindle nose - table top 200 - 1000 mm Distance spindle nose - to column 1005 mm Ex. Honeywell Aerospace Oil skimmer and Chip conveyor included  YOP 2007 deliverd in 2008 and 2009 X - Travel: 2000mm Y - Travel: 960mm Z - Travel: 800mm Table Length: 2400mm Table Width: 900mm Table load: 4000 Feed rate X-Axis: 16000mm/min. Feed rate Y-Axis: 16000mm/min. Feed rate Z-Axis: 16000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 30kW Speeds / ranges: 6000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 5960mm Width: 4840mm Height: 3630mm Weight: 18000kg

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the Dkjdpfx Aew N S E Aeh Ujw cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, Year of construction: 2014, x-travel 700 mm z-travel 400 mm y-axis 550 mm max. table load 650 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale! Dkodpfoxvdvfjx Ah Uow

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 Dodstnh Alopfx Ah Uskw TABLE SIZE 850.0 x 410.0 mm TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec MAX TOOL DIA 80.0 mm MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw PLUS SWARF TRAY COOLANT SYSTEM SET OF TOOLING SET OF MANUALS

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Dsdpjwuz Ekofx Ah Uekw Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: used, Year of construction: 2011, machine/vehicle number: 25621, workpiece diameter (max.): 360 mm, Equipped with: Gear Spindle Runout: -Radial (Bore): .00005 -Axial (Face): .00005 Pinion Spindle Runout: -Radial (Bore): .00005 Axial (Face): .00005 Axis Repeatability: -X: .0001 -Y: .0001 -Z: .0001 Axis Lost Motion: -X: .00005 -Y: .00005 -Z: .00005 Fanuc 160I MB Control Base Work Holding Draw Bars Automatic Doors Spindle Chiller Transformer Hydraulic System Festo Pneumatics Automation Interface Available SPECIFICATIONS: Maximum Gear Outside Diameter: 360 mm (14.2") Maximum Pinion Outside Diameter: 340 mm (13.4") Maximum Pinion Drive Speed: 3000 rpm Maximum Gear Drive Speed: 1500 rpm Offset Vertical 150 mm ( 5.9") Pinion Cone Range: (90) (135-350) (70) (146-438)* (110) (51-343)* Gear Cone Range: (90) (65-280) (70) (78-306)* (110) (56-284)* Standard Testing Torque Load 2 to 90 Nm (1.5 to 66 ft-lb). Dsdpfx Ahoxdfans Uskw Parallel Axis - face-to-face 147 - 362 - Center Distance -7 - 250 Pinion Spindle Bore 39T - Diameter 99.2 mm (3.9") - Depth 419 mm (16.5") Gear Spindle Bore 39T - Diameter 99.2 mm (3.9") - Depth 250 mm (9.8") Floor Space (width & length) 2100 x 2550 mm (82.7 x 100.4") Height (to top of stack light) 2750 mm (108.3") Weight (base machine) 9100 Kg (20062 lbs)

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, table width: 750 mm, table length: 2,900 mm, table load: 2,150 kg, X - Travel: 2600mm Y - Travel: 700mm Z - Travel: 700mm A - Axis: 360000° B - Axis: - 110 to + 110° Table Length: 2900mm Table Width: 750mm Table load: 2150 Table Ø: 750mm Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm Dksdpoxuqv Aofx Ah Uow ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8400mm Width: 3423mm Height: 2620mm Weight: 16000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm Dkjdpfoul Efmex Ah Usw diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Dkjdpfx Aexuv Udjh Ujw Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, MURATEC WIEDEMANN MOTORUM 2048 CNC TURRET PUNCH MACHINE MAKE MURATA WIEDEMANN, MADE IN JAPAN MODEL MOTORUM 2048 CONTROL FANUC 30i TOUCH SCREEN YEAR 2016 CAPACITY 20 TONS SHEET SIZE (WITH ONE REPOSITIONING) 1250mm x 2500mm SHEET THICKNESS MAX. 6.35 mm Dodpsxvch Tjfx Ah Uskw Y, X STOKE Y AXIS: 1360.0 mm X AXIS: 2550.0 mm PUNCHING ACCURACY +- 0.1mm THROAT DEPTH 1340.0 mm MAX ALLOWABLE SHEET WEIGHT 150 KG HIT RATE 1.0T 25 mm PITCH 8.3 mm stroke: 355 HPM 0.5 mm PITCH 1.4 mm stroke: 900 HPM SIMULTANEOUS AXIS SPEED 125 m/MIN PUNCHING ACCURACY +- 0.1 mm TURRET INDEX SPEED 35 RPM COMPRESSED AIR QUANITY: 100NL/MIN PRSSURE: 0.5 MPa POWER SUPPLY 19 kVA PLUS GOOD SET OF TOOLING ONE OWNER FROM NEW VERY LESS HOURS SAFETY GUARDS

Condition: used, machine/vehicle number: 008134, X axis working area: 5780 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Dodpjw Idgiofx Ah Uokw Number of controlled axes: 4 axes Total number of drilling spindles: 32 Total number of tool changer positions: 28

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Dkodpsrtrzdofx Ah Uew Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Year of construction: 2023, CNC Gantry Plasma Cutting Machine with Rotator Manufacturer: Microstep Model: MasterCut 6001.30PtkG Year of manufacture: 2023 CNC control system Working area: 3,000 x 6,000 mm 1 plasma torch with Kjellberg Q3000 power source 1 oxy-fuel torch GCE FIT+ three (cutting gas: acetylene) Burning table with sectional extraction 6,000 x 3,000 mm 'Plasma Rotator MasterCut' with fully automated support ACTG automatic calibration unit for the beveling system Kemper Extraction System 8000 (year 10/2015) Asper Basic 2D programming software + Asper BevelCut bevel cutting programming Other technical specifications: MicroStep machine control with MMI console and 24" touchscreen iMSNC module expert system iMSNC module for automatic calibration of mechanical sensing iMSNC module assistant for loading CNC programs LCD control unit on the gantry Dkjdpfx Ahjxu U Ddj Uow Laser pointer with automatic offset transfer USB 3.0 connectivity for storage devices MicroStep RemoteDiagnostics remote maintenance module Grate cover for cutting table Reinforced design of cutting table Interface for fine plasma source to CNC control Control for automatic gas console Electrical and mechanical torch sensing LED signal tower on the gantry bridge (2 colors) Tactile shutdown device for guide rails Light barrier safety (collision protection) on the gantry bridge with emergency stop Smart Z Movement ACTG calibration report Fully automatic oxy-fuel support Automatic gas console for oxy-fuel torch (cutting gas: acetylene) Active collision protection 71125

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min Dksdpfxjvr Hf Es Ah Uew bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: excellent (used), Year of construction: 2015, Roll pressure infinitely adjustable from 117 kN feeds - fine adjustment 0,5-45 mm/min turning speeds 0-80 U/min Swivel angle of the roller heads 11 ° Diameter of the roller spindles 69,85 mm Stroke - Roller screw slide 0-150 mm min. dist. - roller screws 138 mm max. dist. - roller screws 285 mm min. diameter - Rolling tools 230 mm max. diameter - Rolling tools 135 mm min. dia. 2 mm max. diameter 55 mm thread length at plunge operation 200 mm thread length at continiuous operation 2000 mm maximum thread pitch 4 mm total power requirement 14 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 2,5 x 1,9 m Rolling time continuously adjustable from: 0.1s Pause time continuously adjustable from: 0.1s Rolling spindle length: 200mm Machine bed height: 810mm Rolling spindle height above machine bed: 200 mm Djdpfsxukrqjx Ah Uokw Height of support bearings: 115 mm Largest pitch for serrated teeth: 2.5 mm (up to 70 kg/mm2 Strength of the material)

Condition: like new (used), Year of construction: 2007, Retrofitted: 2024 Dkodeugbn Eepfx Ah Ujw Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): -10 / 990 mmDistance between columns: 2435 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10975 x 4768 x 5095 mm Accesories GuardingAutomatic tool changer: ATC30Coolant: External internal high pressure through spindleElectronic handwheel: HR-410 Sales conditions Guarantee: 6 months mechanical spare partsSale price (Ex Work): On request View all technical features

Condition: used, max. wheel diameter 300 mm gear width 200 mm max. module 12 min. module 0,5 total power requirement 2 kW weight of the machine ca. 1 t dimensions of the machine ca. 0,8 x 1,2 x 1,5 m Djdpfx Aexu Nttjh Ujkw