Used Cnc Machine for sale (64,746)

Condition: ready for operation (used), Year of construction: 2000, Immediately available from location: CNC bed-type milling machine MTE Model Kompakt Plus Year of manufacture 2000 Heidenhain TNC 410 Table 2200 x 750 mm Travel X/Y/Z 2000/800/800 mm Djdpozb Dh Hofx Al Ujkn Table load capacity 4 t Spindle taper SK 50 Hydraulic tool clamping Spindle speeds 40 – 2500 rpm Spindle power 15 kW Total power requirement 30 kW Coolant system Weight 12 t At a price of EUR 11,000—plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1996, Immediately available ex location: CNC universal milling machine Reckermann Type: Primo II Dedpfx Alozb Dgve Ujkn Year of manufacture: 1996 Heidenhain TNC 430 control Spindle taper SK 50 Infinitely variable spindle speeds: 20 – 2,000 rpm Table load capacity: 1,000 kg Stepless feed rates: 20 – 6,000 mm/min Travel (X / Y / Z): 1,000 / 400 / 350 mm Drive: 7.5 kW Weight: 4 t Price: EUR 2,500 plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Dodpjzb Df Eofx Al Uokn

Condition: not inspected (used), Year of construction: 2008, operating hours: 12,799 h, functionality: unexamined, machine/vehicle number: 14508674, This Fehlmann Picomax 60-M – 5-axis CNC machining center, including accessories, is being auctioned off in our online auction “Zink Feinmechanik-Sondermaschinen GmbH – CNC Machining Centers – Tool Holders – Tools – Workshop Equipment.” Machine Data: Manufacturer: FEHLMANN AG Maschinenfabrik Dodpfey Uxa Ejx Al Uskn Machine Type: PICOMAX 60-M Machine No.: 14508674 Year of Manufacture: 2008 Control: Heidenhain iTNC 530 Operating Hours: 12,799 Spindle Hours: 5,303 Weight: 3,350 kg Technical Details: Travel in X-axis: 505 mm Travel in Y-axis: 355 mm Travel in Z-axis: 610 mm Feed Rate (max.): 18,000 rpm Number of slots in the tool magazine: 24 Simultaneous machining in 4th/5th axis Scope of Supply: - Renishaw probing system - Tool measurement - Floor mat - Coolant system - Tools in the lower cabinet - Transport securing devices as shown in the picture without any other items shown Functionality not tested You can find this and many other items from the fields of precision engineering, workshop equipment, CNC technology, CNC accessories, tool holders, and more on our RESTLOS auction platform!

Condition: used, machine/vehicle number: 008469, X axis working area: 3050 mm Y axis working area: 850 mm Dsdpfeywafuox Al Ujkn Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4

Year of construction: 2017, condition: ready for operation (used), X-axis: 550mm, y-axis: 305mm, z-axis: 460mm, milling table dimensions: 800x320mm, T slots: 14mm/3 pieces/distance 100mm, max. table load: 300kg, spindle to table distance: 100-600mm, number of tool positions: 12, max. tool diameter: 70mm, max. tool length: 300mm, max. tool weight: 6kg, tool change time (T to T): 7s, milling spindle power S1 operation: 5.5kW, power S6 30% operation: 7.8kW, torque S1 operation: 35Nm, torque S6 30% operation: 50Nm, spindle holder: ISO 40/BT40x45°, coolant system pump output: 650W, tank capacity: 120l, compressed air minimum connection pressure: 0.6MPa (6bar), air consumption: 0.1-0.15m³/h at 0.6MPa, compressed air quality: ISO 8573.1 class 2, compressed air connection: 3/8 inch, connected load: 12.5kVA, control: Siemens SINUMERIK 808D MILLING, length: 2164mm, front width: 1520mm, side width: 1860mm, height: 2200mm, door opening range: 760mm, door opening width: 1055mm, foundation/installation area: 1520x2080mm, weight: 2.8t. An on site inspection is possible. Dkodjzcfk Ejpfx Al Usn

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 5 rpm, feed length X-axis: 1,200 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 700 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,000 m/min, total width: 4,000 mm, San Rocco Horizontal Boring Machine Fully overhauled San Rocco horizontal boring machine, originating from a high-end aerospace manufacturing facility. The machine is equipped with a Siemens SINUMERIK 840D CNC control system with SIMODRIVE 611 drive technology. The machine is fitted with modern digital drive systems and is designed for high-precision multi-axis machining in continuous operation. It was fully overhauled in 2024, including brand-new telescopic covers on all axes, as well as numerous additional essential refurbishments to the hydraulic system, CNC components, hoses, seals, and related assemblies. Travels X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle Data Boring spindle diameter: 100 mm Tool interface: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Feeds and Rapid Traverses Automatic feeds (spindle and vertical axis): 2 × 1,000 mm/min Rapid traverse (spindle and vertical axis): 5,500 mm/min Dkedpfxex Rhlcs Al Uen Distances Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance from spindle nose to table center: 1,850 mm Spindle Speeds Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gearbox ranges: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table Data Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table Feeds Automatic feeds X and Y: 1,000 mm/min Rapid traverse X and Y: 5,500 mm/min Table Rotation Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive System Siemens SIMODRIVE 611 E/R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting and Transport Data Group 1 Steel bar Ø 70 mm, length 1,600 mm Steel bar Ø 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel slings Ø 22 mm Weight approx. 12,500 kg Group 2 Two steel slings, minimum Ø 18 mm Weight approx. 3,500 kg Group 3 Manual lifting Weight approx. 1,300 kg Condition The machine is in very good technical condition and can be inspected and tested under power by appointment.

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 8,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,500 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, coolant supply: 15 bar, spindle motor power: 33,000 W, controller manufacturer: HEIDENHAIN, controller model: 430 CA, power: 0.033 kW (0.04 HP), Equipment: rotational speed infinitely variable, ANAYAK HVM 9000 – CNC moving column milling machine | 8300 mm x travel | Fully overhauled High-capacity CNC bed milling machine with moving column, reconditioned in workshop. Perfect for heavy-duty machining of large components with precision and reliability. 🛠 Key technical specifications: • X-axis travel: 8300 mm • Y-axis travel: 2000 mm • Z-axis travel: 2500 mm • Spindle power: 33 kW – 3000 rpm • Spindle taper: ISO 50 DIN 69871-B • Tool changer: 30 positions • Automatic axes: B and C • CNC Control: HEIDENHAIN TNC 430 CA • Internal coolant: 50 l/min at 15 bar • External coolant: 100 l/min 🔧 Full retrofit includes: • Regrinding and geometry adjustment of Y and column guides • Complete head overhaul: new bearings, seals, gears • Full electrical cabinet update under CE compliance • New telescopic covers, drag chains, and motor wiring • Machine tested and delivered with full documentation ✅ Ideal for: Dkjdpfx Alsqpd D Io Usn • Large-scale component machining • Energy, wind, and railway industries • Mold making, aerospace structures, and shipbuilding 📌 Ready for immediate delivery. Power, scale, and accuracy in one robust CNC machine.

Year of construction: 1991, condition: ready for operation (used), Travel X/Y/Z: 380mm/280mm/300mm, working dimensions X/Y/Z: 580mm/450mm/340mm, max. electrode weight: 50kg. Machine dimensions X/Y/Z: approx. 2100mm/1650mm/1750mm, weight: approx. 3500kg. An on-site inspection is possible. Dkjdpjzb Nlwsfx Al Ujn

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Equipment: CE marking, documentation/manual, CNC NESTING SCM PRATIX S22-31B with AUTOMATIC UNLOADING TECHNICAL FEATURES • Moving gantry, with Bumper safety system • 3 controlled axes: X, Y, and Z • Travel speed on the axes: X: 35 m/min Y: 35 m/min Z: 15 m/min • Usable working area in X: 3,086 mm • Usable working area in Y: 2,155 mm • Usable working area in Z: 150 mm • PRO-SPACE safety system. With this system, the machine does not require perimeter guards or safety mats; the operator has free access to the work area from any side. • MATRIX aluminum table, 2,220 mm x 3,150 mm • 16 retractable pneumatic stops on the table (6+6 in Y and 4+4 in X) • 8 MPS 130x130 mm suction cups, H=25 mm • 4 MPS 150x50 mm suction cups, H=25 mm • SCM TECPAD remote control with digital display, with its corresponding resting base • Lubrication of the guides by means of a centralized drive pump • 2 vacuum pumps of 250 m3/h each, located under the machine structure • Xilog-Plus control software • Maestro Nesting software. Rectangular nesting • DXF file import • Pusher for evacuating finished parts, with vacuum cleaning system • Motorized belt table for material unloading, with photocells to read parts at the end. 3,200 mm x 2,180 mm • CE COMPLIANCE • Machine in excellent condition. Year of manufacture: 2014 • Supplied with the instruction manual, machine exploded view diagram, and electrical diagram. OPERATIONAL GROUPS: ROUTER • Electro-spindle power: 6.6 kW / 9 HP. 0 - 24,000 rpm Dsdpfx Alozav Hxj Uokn • Air blowers • Mount that allows for the attachment of a horizontal tool • Linear tool changer, TR13 model, with 13 positions • ATC for HSK F63 tool holders • Calibration sensor to automatically measure tool length MULTIPLE DRILLING UNIT • 7 vertical drill holders • 1+1 horizontal drill holders in the X direction • 1+1 horizontal drill holders in the Y direction • 1 vertical disc in the X direction

Condition: used, Year of construction: 1995, functionality: fully functional, travel distance X-axis: 6,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 10 rpm, table width: 1,000 mm, table length: 8,000 mm, CNC Bed Milling Machine Zayer MF3 8000 CNC For sale: bed milling machine from the well-known manufacturer Zayer, model MF3 8000 CNC, production year 1995. The machine is designed for machining large and long workpieces, ensuring high precision and rigidity. Technical specifications: Dkjdpfsyw N Rajx Al Ujn Travels X/Y/Z: 6300 x 1100 x 1500 mm Table size: 8000 x 1000 mm Spindle speed: 10 – 1800 rpm Spindle power: 18.5 kW Spindle taper: ISO 50 CNC control: Heidenhain TNC 320 Universal milling head: 360° swivelling Machine in very good technical condition, ready for operation.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, Technical data: TABLE Table surface 700 x 350 mm Table height from floor 835 mm T-slots 16 mm x 63.5 mm / 4 pcs. Workpiece weight max. 350 kg Travel ranges: X 610 mm Y 355 mm Z 460 mm Distance from spindle center to column surface 415 mm Distance from spindle nose / table min. 70 mm / max. 530 mm SPINDLE Spindle mounting SK 40 / DIN 69871 (draw bolt: DIN 69872) Spindle speeds, stepless 10000 rpm Spindle drive motor Siemens: 7.5 / 11.0 kW AXIS FEED, digital feed motors, direct drives All 3 feed motors are directly flange-mounted. Drive without timing belt! Manufacturer of ball screws: HiWiN X-axis Feed motor: Siemens Ball screw: Ø 32 x 10; C 5 Y-axis Feed motor: Siemens Ball screw: Ø 32 x 10; C 5 Z-axis Feed motor: Siemens Ball screw: Ø 32 x 10; C 5 FEED RATES: Rapid traverse: 20 m/min for X and Y-axis, 18 m/min for Z-axis Feeds: X - Y: 1-10 m/min. ACCURACY Positioning: (within 300 mm) +/- 0.005 mm Repeatability: +/- 0.004 mm TOOL CHANGER Tool mounting: DIN 69871 with draw bolt DIN 69872 Changer system standard: disc changer without arm Capacity: 10 tools Change time: approx. 20 seconds max. Max. tool weight: 7.0 kg Largest tool diameter: 93 (120) mm Max. tool length: 300 mm AIR SUPPLY Required pressure: 6.5 bar Air consumption: 300 l / min. Dksdpezcazxofx Al Usn Standard accessories: - CNC control SIEMENS 828 D with "SHOPMILL" user interface - Large selection of milling and drilling cycles - Machining cycle for contour pockets / contour ribs with islands, etc. - Graphic functions - Tool management - User CF card on the control panel front - RS 232 C interface - USB interface on the control panel front - RCS-Commander: front ETHERNET interface for notebook PC - 100 Mbit/sec. TCP / iP ETHERNET interface for connection to a company network - Portable electronic handwheel - Tapping without compensation chuck (Rigid Tapping) - Spindle orientation - Color screen (LCD) 10.4" - Manual in all 3 axes - Semi-automatic with manual feed operation - Automatic with cycle function, CNC operation without CNC knowledge - ISO programming - Linking of cycle programs and ISO programs - Large memory for created programs - Full enclosure (CE) - Heat exchanger for the control cabinet - Automatic tool clamping - Automatic tool changer with 10 tools - Spindle air blow-out - Coolant system incl. oil separator - Automatic central lubrication - Work light - Electronic handwheel for all 3 axes - CE conformity, EMC filter - 24 months full warranty Siemens "RSV" - Two-tone paint: white RAL 7035, black RAL 7021 - Increase in spindle speed to 10000 rpm - Chip conveyor in hinge chain design - Coolant supply through the milling spindle (internal cooling) with 20 bar high-pressure pump = 55 l/min., separate tank - Automatic tool changer without arm with 16 tools - Preparation for 4th axis

Condition: good (used), Year of construction: 2012, 5-axis CNC machining center Manufacturer: AXA Machine model: VPC-2800U Control system: Siemens Year of manufacture: 2012 Technical data Working area - X-axis travel (mm) 3,900 - Y-axis travel (mm) 2,940 - Z-axis travel (mm) 1,100 CNC rotary table - Clamping surface (mm) ø 2,800 Feed drive - Max. rapid traverse rate in X/Y/Z (m/min) 30/30/25 Main spindle - Standard drive No. 140 Spindle speed range (rpm) 30-7500 Spindle power max. continuous duty 100% (kW) 63 Spindle torque max. continuous duty 100% (Nm) 191 Tool holder: SK50 Swiveling head Dsdpfxsy Txt Ne Al Uekn - Swiveling range B-axis (degrees) 90 - Indexing: freely interpolating Tool changer - Number of tool positions: 60 Please note: The machine is NOT equipped with a rotary function. Subject to changes and errors in the technical data and specifications.

Condition: good (used), Year of construction: 2020, 5-axis CNC machining center - universal - Manufacturer: MAZAK Machine model: Variaxis J-500 Control system: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travel ranges - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary and swivel table): (degrees) 360 Feed rate X/Y/Z: (mm/min) 8,000 Rapid traverse rates - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 degrees/min Spindle - Spindle speed max.: (rpm) 12,000 - Drive power (ED) 100 / 40: (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table Swivel rotary table Dkedpfx Ajy Txrxsl Ujn Pallet system - Pallet changer: 2-position - Clamping table dimensions: (mm) 500 x 400 Swivel rotary table - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 EQUIPMENT FEATURES + Internal cooling system 70 bar + Chip conveyor with scraper band + Oil mist extraction + Tool length measurement and tool breakage monitoring + Additional interior lighting + Signal light (3-color) Subject to changes and errors in the technical data and specifications.

Condition: used, Year of construction: 2021, operating hours: 7,246 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rotational speed (min.): 10,000 rpm, spindle speed (min.): 20 rpm, Equipment: chip conveyor, CNC machining center, used Manufacturer: DMG MORI Type: M1 - Plus Year of manufacture: 2021 Purchase / Acceptance: May 26, 2022, as a demonstration machine Operating hours: Spindle: 4,049 h Total: 7,246 h Control system: Siemens Sinumerik 828D + Job Shop Working area: X-axis travel: 550 mm Y-axis travel: 550 mm Z-axis travel: 510 mm Spindle: Speed: 20 - 10,000 rpm Power: 13/9 kW Mount: SK 40 DIN 69871 Tool changer: 24-position Dsdpfx Alszbvqgj Uskn Equipment: - Renishaw 3D probe - Renishaw tool probe - Chip conveyor, left side - Coolant gun

Condition: good (used), Year of construction: 1997, functionality: fully functional, input current: 50 A, number of axes: 3, number of slots in tool magazine: 12, total length: 5,000 mm, total width: 2,900 mm, overall weight: 4,500 kg, Equipment: CE marking, documentation/manual, CNC milling machine with a tool magazine for 12 tools, featuring a vacuum clamping system to secure the workpiece, and includes a vacuum pump. Djdpfxsza U Nxj Al Uokn

Condition: excellent (used), Year of construction: 2016, Siemens 840 SL control, twin spindle, 20,000 rpm, HSK 63, 2 x 32 tool positions, internal coolant supply at 30 bar, X 550 mm, Y 400 mm, Z 400 mm, direct measuring system, workpiece changer, laser control, Knoll coolant system, fixture flushing system, central lubrication system, automatic loading doors, year of manufacture 2016. Dkjdpfx Alszb D Rno Usn

Condition: used, Year of construction: 2014, operating hours: 33,100 h, machine/vehicle number: 2941, Control system: HEIDENHAIN TNC530, travel range X/Y/Z: 3,500 x 1,200 x 1,250 mm, swivel head: 2.5°, tool holder: SK50, 60 tool positions, chip conveyor: URRETXU 11-20132, serial number: 4855492004U5E2, filter system: JUMA+GAIN, serial number: 7136, capacity: 60 l/min, year of manufacture: 2013. Dkodpfx Aley T Nx Nj Ujn

Year of construction: 2016, operating hours: 17,607 h, condition: used, machine/vehicle number: 7975, Control system: HEIDENHAIN TNC640, travel range X/Y/Z: 10,000 x 1,300 x 2,200 mm, swiveling head: 2.5°, tool holder: SK50, 60 tool positions, chip conveyor: AXA FSB 300/TLG.63, serial number: 173492-2, year of manufacture: 2016, filter system: JUMA+GAIN, serial number: 8276, capacity: 100 l/min, year of manufacture: 2016, including 2 90° stands. Dkedpfxoy T Nyaj Al Usn

Condition: used, Year of construction: 2014, operating hours: 30,663 h, machine/vehicle number: 87391, Control system: HEIDENHAIN TNC530, travel range X/Y/Z: 2x 750x500x600 mm, swiveling table, tool holder: SK40, 22 tool positions, chip conveyor: AXA FSB 300/TLG:38,1, serial number: 171153-1, 87391, year of manufacture: 2014. Dksdpsy T Nygofx Al Usn

Condition: like new (used), Year of construction: 2007, Table size 2200 x 1000 mm Longitudinal travel 2050 mm Cross travel 1150 mm Vertical travel 760 mm Spindle speeds 12.000 rpm Spindle taper ISA 40 Dedpjg Tdavsfx Al Uskn Power feed 1 - 8.000 mm/min Rapid speed Z-axe 15 m/min Rapid speed X - Y axis 20 m/min Control Heidenhain IT 530 NC Tool change 40 pcs

Condition: used, Year of construction: 1990, total length: 5,900 mm, total height: 2,000 mm, total width: 1,300 mm, Empty weight: 7.500 kg Price: On request Center-height: 250mm Table-length: 2300mm Travel grinding-spindel: 200mm Gear diameter: 300 mm Module range: 0.5 mm – 8 mm Helix angle: ±35° Max. workpiece weight: 100 kg - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 018.0402 Dkodpfx Aloxz Du Se Usn - Drive system: CNC - Control system brand: Optronic - Control system type: CNC D140 - Min. module [mm]: 0.5 - Max. module [mm]: 8 - Max. workpiece weight [kg]: 100 - Table length [mm]: 2300 - Transport dimensions: 5900mm x 1300mm x 2000mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1999, Correa CF22/25 Plus CNC Bed Milling Machine. Serial No. 9672507 (1999) with Heidenhain 426 Control, Table Size 2500 x 700mm, Travel X/Y/Z = 2000/800/800mm, Angles Swivel Spindle Head, Spindle Taper ISO50, Max Spindle Speed 4000rpm, Feed RAtes 5 - 5000mm/min, Rapids 12,000mm/min, 22kW Motor Power, Max Table Load 4000kgs, Machine Weight 9500kgs Location: These lots are located in Burton-on-Trent & Birmingham, UK. Please see individual lot for dismantling and loading charges. Dsdpjy Uv Tcjfx Al Uekn UK Strategic Export Control Legislation (1st April 2024) The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Technical Information for Mazak Corporation Mazak VTC-300C II: Model: Mazak VTC-300C II Machine type: Vertical CNC Machining Center Year of manufacture: 2003 Serial number: 162107 Accessories: Chip conveyor included Connected load: 28 kW Typical technical data for the Mazak VTC-300C II: Control: Mazatrol Fusion 640M / Mazatrol PC Fusion CNC Travel distances: X-axis: approx. 1,740 mm, Y-axis: approx. 760 mm, Z-axis: approx. 660 mm Table size: approx. 2,000 × 760 mm Table load capacity: up to approx. 1,400–1,500 kg Spindle taper: CAT 40 / BT40 Spindle speed: typically 10,000 rpm Main spindle power: approx. 18.5–22 kW Tool changer: 30 positions Rapid traverse: approx. 36 m/min Coolant system: included Djdpfxsy St E Rs Al Ujkn Machine weight: approx. 11,000–13,000 kg The machine is part of Mazak’s large VTC series and is particularly suited for: Large aluminum parts Steel machining Automotive production Fixture and series manufacturing

Condition: used, Kitamura JigCentre 7 CNC Machining Centre. Serial No. 50274 with Fanuc System 11m CNC Control (Tape), Table Working Area 1500mm x 800mm, Load Capacity 2000kg, Travels X Axis 1100mm, Y Axis 850mm, Z Axis 460mm, Spindle Speeds 60 - 6000rpm, 30 Tool ATC, BT40 Spindle Taper, Rapid Feeds X & Y 12,000mm/min, Z 9,000mm/min, Cutting Feeds 0 - 5000mm/min, Tsudakoma Powered Rotary Table (300 Ø), Machine Weight 8300kg Location: This lot is located in Birmingham, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dedpfxey Uv Uys Al Ujkn