Used Cnc Rotary Transfer Machine for sale (66,681)

Year of construction: 1989, condition: ready for operation (used), Weight: 1.5t, operating hours unknown, with documentation, machine vices and fixtures are available as accessories, the machine ran in one shift operation and was serviced regularly. An inspection on site is possible. Csdpszbb Spofx Al Rsgu

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Cgjdpfx Aetrhq Hsl Rsu Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Cgedsyqxxrepfx Al Rou Maximum edge height: 60 mm Total number of drilling spindles: 40 Total number of tool changer positions: 22

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Cedpfx Ajhmmfkel Rjgu Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm Cedjv R E Rdspfx Al Rogu - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Cgedpfow Nklhex Al Rju Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel Cgsdpfow A Af Iex Al Reu - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Cgjdpfx Alsty A Eho Rsu Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: used, Year of construction: 1995, CNC Milling Machine, Universal Manufacturer: HERMLE Type: UWF 902 S Year of Manufacture: 1995 Operating Hours: 65,071 Control System: HEIDENHAIN TNC 426 Working Area X/Y/Z: 600 x 450 x 500 mm Cjdpsv Rxa Sjfx Al Regu Spindle Speed Range: 20 - 6,300 RPM Tool Holder: SK 40 M & H 3D Probe (for workpiece probing) Vertical/Horizontal Milling Head Drilling Spindle Coolant System Rotary Table: 900 x 458 Weight: 4,000 kg Machine Dimensions: L x W x H, approx.: 3,900 x 2,000 x 2,000 mm ä3626

Condition: used, Year of construction: 1995, CNC Milling Machine, Universal Manufacturer: HERMLE Type: UWF 902 H Year of Manufacture: 1995 Operating Hours: 46,680 Control System: HEIDENHAIN TNC 426 Travel distances X/Y/Z: 600 x 450 x 500 mm Rotary Table: 900 x 458 mm Renishaw 3D probe Spindle Speed Range: 20 to 6,300 rpm Tool Holder: SK 40 Coolant Tank Drive Power: 8.6 kW Weight approx.: 4,500 kg Cgedpfx Alsv Rpr So Rju Machine Dimensions L x W x H approx.: 2,950 x 2,200 x 2,300 mm 3626

Condition: good (used), Year of construction: 2016, CNC Portal flame cutting machine Cedpfjgqkc Nox Al Regu Manufacturer: Sato Type: Satronik D5765 Manufacture: 2016 CNC control: Satocontrol CNC 3010 Track width: 5.750 mm 6 x oxyfuel torche without tracks without table without filter

Condition: used, Year of construction: 2003, CNC machining center, universal Manufacturer: AXA Type: VPC 40 U Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Travel distances: X/Y/Z = 2,300 x 1,200 x 600 mm Cgjdpjwwt Nmofx Al Rsu NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Tool holder: SK40 Tool magazine: 60-position Spindle speed: 10,000 rpm Weight: approx. 20 tons 3626ä

Condition: used, Year of construction: 2012, CNC machining center Manufacturer: Unverzagt Type: UVA 550 Plus Year of manufacture: 2012 Control system: Siemens 828D Codpfswv Tm Nsx Al Regu Operating hours: approx. 3,000 Travel ranges: X/Y/Z: 600 x 400 x 500 mm Tool positions: 20 Tool holder: SK40 Spindle speed range: 10,000 rpm Hexagon measuring probe Chip conveyor Spindle cooler IKZ (internal cooling system) 3626ä

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,850 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 9,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL SPEED HAWK 650 CNC machining center - Important note: the spindle was replaced in 2025 for approximately EUR 40,000, therefore, very few spindle hours! - Pallet dimensions: approx. 320 x 320 mm - The pallets are clamped onto the rotary table. Cgedpfx Aljy Tvcuo Rou - Tool holder: HSK-E 40 - For further technical data, see the images. - Includes technical documentation. - Includes HSK-E 40 tool holders and three pallets. Attention: The item must be collected between July 21st and July 23rd, 2026, on a date to be agreed upon. FCA D-80339 Munich - loaded onto a truck.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, workpiece weight (max.): 2,000 kg, total height: 2,300 mm, total length: 3,300 mm, total width: 2,300 mm, table width: 700 mm, table length: 850 mm, table load: 2,000 kg, overall weight: 7,700 kg, spindle speed (min.): 3,000 rpm, spindle speed (max.): 40,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL OPS 650 CNC machining center - Table T-slot quantity: 5 - T-slot dimensions: 18H12 - Distance HSK tool holder – table: 550 mm - Main spindle tool holder: HSK-E 40 - Positioning accuracy TP according to DIN ISO 230-2: 0.005 mm - Repeatability: 0.002 mm - For further technical data, see the photographed data sheet. - With technical documentation - With workbench and accessories, including HSK-E 40 tool holders, equipped with tools - Workbench dimensions: approx. 1500 x 900 x 1100 mm Note: The item must be picked up between July 21st and 23rd, 2026, on a date to be confirmed. FCA D-80339 Munich - loaded onto a truck. Cjdpfx Aloy Tu Dds Rsgu

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 655118, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 38 kVA, total height: 2,300 mm, total length: 3,300 mm, total width: 2,200 mm, overall weight: 7,200 kg, spindle speed (max.): 42,000 rpm, input voltage: 400 V, Equipment: documentation/manual, OPS INGERSOLL SPEED HAWK 550 CNC machining center (5-axis) - Distance between HSK-E tool holder and table: 450 mm - Swivel angle of A-axis: -120°/+60° - Swivel angle of C-axis: n x 360° - Tool holder: HSK-E 40 - Clamping surface with 4th and 5th axis: Pallet dimensions: approx. 300 x 300 mm - Maximum travel speed: 30 m/min - Repeatability: 0.002 mm Cedpfxoy Tutls Al Rogu - Digital display: 0.001 or 0.0001 mm (selectable) - For further technical data, see the photographed images - Includes technical documentation - Includes three spare pallets - Note: Specific fixtures have been attached to the pallets - Includes HSK-E 40 tool holders Attention: The item must be collected between July 21st and July 23rd, 2026, on a date to be agreed upon. FCA D-80339 Munich - loaded onto a truck.

Condition: used, Year of construction: 2012, power: 7.5 kW (10.20 HP), travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, number of slots in tool magazine: 12, No. 3274 CNC machining center HOMAG PROFI BAZ 222/40/F/K Used, year of construction 2012 Working area X 4000 mm Working area Y 1550 mm Working area Z 300 mm 1 milling spindle Main motor 7.5 kW Cgodjy S Edxspfx Al Rsu Maximum speed 24000 rpm Tool clamping system HSK-F63 12 tool changer positions 17 vertical drilling spindles 2 horizontal drilling spindles X 2 horizontal drilling spindles Y Grooving saw, 90° swiveling Edge banding unit Separate Y-axis Console table, 6 consoles Vacuum pump Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, GHIRINGHELLI M150SP610 is a CNC centerless grinding machine designed for precision, high accuracy and reliable production. Capacities: grinding diameter 1–100 mm, infeed grinding 140 mm. Grinding wheel: new Ø610 mm (worn Ø440 mm), width 200 mm, bore 305 mm; regulating wheel: new Ø305 mm (worn Ø220 mm), width 200 mm, swivel -7/+7°. Wheel speeds: 1409 rpm (new), 1685 rpm (worn), peripheral speed 45 m/s; stepless regulating spindle 0–140 rpm; dressing speed 400 rpm. Power 3×400 V 50 Hz, air 5 bar, total installed 45 kW. Size L6200×W3200×H2542 mm, weight ≈5800 kg. Accessories: diamond wheel, automatic infeed attachment, flanges, MARPOSS E78 electronic balancing, profiling device, central lubrication, splash guard. Achieves tight tolerances; typical sectors: automotive, aerospace, medical, machine tools, watchmaking Csdpsy S Dd Rsfx Al Rogu

Condition: ready for operation (used), Year of construction: 1999, Available immediately ex location: CNC Vertical Machining Center EMCO Type VMC 600 Year of manufacture: 1999 Heidenhain TNC 426 D Electronic handwheel Travel X/Y/Z: 1200/410/370 mm SK 40 24-position tool magazine Cgjdpjzaqdrofx Al Rou Speeds up to 6,000 rpm 3 vices Weight: 4 t Price: EUR 6,500.-- plus VAT, ex location SK 40

Condition: ready for operation (used), Year of construction: 2000, Immediately available from location: CNC bed-type milling machine MTE Model Kompakt Plus Year of manufacture 2000 Heidenhain TNC 410 Table 2200 x 750 mm Travel X/Y/Z 2000/800/800 mm Table load capacity 4 t Cgodpfx Aljzaqbkj Rsu Spindle taper SK 50 Hydraulic tool clamping Spindle speeds 40 – 2500 rpm Spindle power 15 kW Total power requirement 30 kW Coolant system Weight 12 t At a price of EUR 11,000—plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1996, Immediately available ex location: CNC universal milling machine Reckermann Type: Primo II Year of manufacture: 1996 Heidenhain TNC 430 control Spindle taper SK 50 Infinitely variable spindle speeds: 20 – 2,000 rpm Table load capacity: 1,000 kg Codpfxjzaqaas Al Rsgu Stepless feed rates: 20 – 6,000 mm/min Travel (X / Y / Z): 1,000 / 400 / 350 mm Drive: 7.5 kW Weight: 4 t Price: EUR 2,500 plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Cgedpfx Aszap Uijl Reu

Condition: used, Year of construction: 2014, Used machine Cgsdpfxex Hllxe Al Rju Year of manufacture: 2014 Features and technical data: - Working area X: 3,740 mm - Working area Y: 1,570 mm - Working area Z: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left side of the machine stand - Vertical drilling spindles: 12 - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with hand-held control device - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: short-term Location: Röllbach

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Cgedpfsza E S Dox Al Reu

Condition: ready for operation (used), Year of construction: 2001, X-axis: 700mm, y-axis: 500mm, z-axis: 600mm, table dimensions: 510x1020mm, max. spindle speed: 10,000rpm, milling feed rate: 11.4m/min, rapid traverse rate: 24m/min, tool changer: 24-position, tool holder: SK40-A DIN 69872, connected load: 25kVA, control: Hurco Ultimax, software version: 2.32, coolant tank capacity: 120l, accessories available if required: milling tool holders, tool cabinet, workbench, and numerous additional items. The home position of the tool changer requires adjustment. An on-site inspection is possible. Cgjdpfxsza E R Hs Al Reu