Used Cnc Router for sale (9,118)

Condition: ready for operation (used), Year of construction: 1980, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 1,200 rpm, number of axes: 5, This 5-axis FERMAT WHN 13.8 CNC was manufactured in 1980 and overhauled in 2008. It features a generous X-axis travel of 3,500 mm, Y-axis travel of 2,000 mm, and Z-axis travel of 1,250 mm. The machine includes a robust table size of 2,200 x 1,800 mm and can handle a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality machining capabilities, consider the FERMAT WHN 13.8 CNC horizontal machining centre. Contact us for further details. - Original Year of Manufacture: 1980 - Overhaul / Modernization Year: 2008 (by FERMAT CZ s.r.o.) - Heidenhain main drive module for Y-axis renewed in 2026- CNC Control: Heidenhain iTNC 530 (with installed Service Pack and electronic handwheel) - Controlled Axes: 5 axes (X, Y, Z, W, and B)- Travel W-Axis (Spindle stroke): 800 mm - B-Axis: NC rotary table (360°) - Table Dimensions: 2,200 x 1,800 mm - Max. Workpiece Weight on Table: 12,000 kg - T-Slots: 11 slots; 24 H7; 160 mm pitch - Spindle Diameter: 130 mm - Tool Taper: ISO 50 - Spindle Speed Range: 5 to 1,200 rpm - Main Drive Power: 37 kW - Rapid Traverse: 6,000 mm/min - Positioning Accuracy: ± 0.02 mm - Installed Power Capacity: 50 kVA - Machine Dimensions: approx. 7,800 x 7,200 x 4,900 mm - Footprint / Ceiling Clearance: approx. 50 m² floor space; required installation height 6,300 mm - Machine Weight: approx. 38,000 kg - Included Equipment & Features: Chip conveyor system, separate electrical control cabinet, hydraulic supply unit, technical documentation and operating manual (Version Breuer 060412) Dkedpj Agvr Ssfx Ak Asw

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 25072, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: DELSY EASYCOM, controller model: EASYCOM 4AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 120 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, overall weight: 2,900 kg, total length: 3,000 mm, total width: 1,000 mm, total height: 1,200 mm, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 Roll plate bending machine dual initial pinch MG Italy 2000X6mm Mode CNC EASYCOM 4-AXIS NEW MACHINE serial no. 25072 Capacity: -Width of plate: 2000 mm Dedpfj Ahgwisx Ak Aokw -Thickness plate roll 6 mm -Plate pre-bend 4 mm Rolls -useful width mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: hardened rollers, surface smooth finishing for all kind of plates and stainless steel Prebend process in manual and automatic full rounding no-flat plate ends Conical plate rolling cones and reducers hydraulic control dual initial pinch Driven rolls rotation hydraulic powered with axial gear unit plate dragging and forming . Console electric CNC with centralized commands joysticks , 4-axis position programming and readout. CNC controller interface touch screen 15”, 4 axis teach-in programming mode, infinite memory storage for automatic plate roll. On screen digital position readout of the 4 rollers for automatic programmable control and/or manual bending use by operator. Opening hydraulic drop-end machine front for the unload of fully round bending. Variable working speed fast-slow controlled Safety installation with emergency stop. Instruction manuals for operation and service.

Condition: used, Year of construction: 2003, 2003 Mazak Mega Turn A16N M/C CNC Vertical Turning Centre with Elevating Bridge, 'C' Axis & Mazatrol PC-Fusion Control Independant Ø1,600mm 4 Jaw Chuck. Maximum Swing Ø2,030mm. Maximum Table Load 12,000kg. Maximum Turning Height 1,828mm. Ram Travel 'Z'=1,067mm, 'X' Travel 599mm (Right), 1,016mm (Left). Cross Rail Travel 762mm. Maximum Table Speed 230rpm. Milling Spindle Maximum Speed 1,100rpm. 30 Position ATC. S/No. 163418 2 (2003). Note: Has Crossrail & Parameter Issue. Dkjdpfj Ahg Tfjx Ak Aow With Chip Conveyor & Coolant System. Weight 32,300kg.

Condition: used, Year of construction: 2006, 2006 DMG Gildemeister GMX 400 Linear Multi-Tasking Twin Spindle CNC Lathe With Siemens 840D Control & Pneumotec Gantry Parts Loading System With Dual Rohm KUBF-400/4 Ø400mm Power Chucks. Swing Ø640mm. Maximum Turning Ø640mm. Maximum Turning Length 1,500mm. Axis Travel 'X1'=550mm, 'Y'=220mm, 'Z1'=1,585mm, 'X2'=225mm, 'Z2'=1,400mm, 'Z3'=1,500mm, 'B'= ±120°. Rapid Travere 'X'=40m/min, 'Y'=24m/min, 'Z'=60m/min. Spindle Bore Ø107mm. Maximum Bar Capacity Ø92mm. Maximum Main Spindle Speed 4,000rpm (45kW Motor). Maximum Sub Spindle Speed 4,000rpm (45kW Motor). Maximum Rotary Spindle Speed 12,000 (22kW Motor). Rotary Spindle Taper Capto C6. 60 Position ATC. 12 Position Sauter Turret. 20 Position Loading Station With Air Blast Cleaning Tank. S/No. 07500001331 (2006). With Coolant Paper Filtration System, Chip Conveyor, IFM Mist Extraction Unit, Oil Chiller, Automatic Doors, Foot Switches, Wash Gun, Handwheel, Signal Tower & Manuals. Overall Dimensions L9,347 x W4,646 x H3,018mm. Weight 24,000kg. Dkedpfs Ahg R Sox Ak Ajw

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Dkjdpfsvvi Nzox Ak Asw

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Dkedpezvhlkjfx Ak Aew Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: used, Year of construction: 2015, turning diameter max. 240 mm turning length 470 mm control 840 D sl Operate 4.8 Celos greates pass round over bed 500 mm swing diameter over slide rest 290 mm centre distance 780 mm turning speed range - main spindle max. 6.000 min/-1 power capacity - main spindel 13 / 14 kW max. Torque 171,5 / 192 Nm inner draw tube diameter 52 mm C-Axis 0,001 ° Dedpfx Ajz S Nyaek Ajkw spindle diameter in front bearing 100 mm spindle nose FL 140H5 Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 12,6 / 16,2 kW max. Torque 48 / 62 Nm inner draw tube diameter 37 mm C-Axis 0,001 ° spindle diameter in front bearing 90 mm spindle nose FL 140H5 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. tool taper VDI 30 Spindle speed - driven tool stations max. 5.000 min -1 power capacity - driven tool-stations 4,18 kW max. Torque 16 / 20 Nm y-axis 80 (+/- 40) mm x-axis 145 mm y-axis 80 (+/- 40) mm z-axis 520 mm z2-Axis 550 mm rapid traverse ( X / Y / Z ) 30 / 22,5 / 30 m/min Feed force ( X / Y / Z ) 4,5 / 4,5 / 7,5 kN total power requirement 30 kVA weight of the machine ca. 4,3 t dimensions of the machine ca. 7,0 x 3,0 x 2,2 m CNC - Turning- and MillingCenter DMG GILDEMEISTER - CTX alpha 500 V6 - Only approx. 11,139 spindle hours - External chuck flushing system for the main spindle - External chuck flushing system for the counter-spindle Coolant supply through the counter-spindle - Coolant spray gun - Bar machining package Workpiece unloading device with conveyor belt (left-hand side) for parts up to 51 mm in diameter and 185 mm in length, max. 3 kg Hydraulic hollow clamping system Draw tube inner diameter: max. 52 mm 4-color signal light Connection for bar feeder or bar loading magazine - Preparation for external handling Electrical robot interface (Profibus) Automatic work area door Chuck flushing system with coolant (main spindle)

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231232, Hermle C600 U, year of manufacture 2004 Spindle new, with commissioning report Control system: - Heidenhain iTNC 530 - Control system operating hours: 68026 - Machine operating hours: 81237 - Spindle operating hours: 12429 Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool magazine positions Equipment: - Rigid clamping table - NC rotary table, 4th axis (iTNC) - Coolant system Djdpfxo Ahfbde Ak Aokw - Chip conveyor: none - Electronic handwheel (iTNC) - Tool breakage monitoring - Chip flushing nozzle - Foot switch for clamping/unclamping - Hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axis rapid traverse: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Dimensions & Weight: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Dksdpfxezizkyj Ak Aew Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, CNC Hydraulic Press Brake Manufacturer: EHT Model: EHPS 2030 Year of manufacture: 1995 Control system: Cybelec Dkjdpe Ahm Ibsfx Ak Ajw Max. working width: 3050 mm Clamping force: 200 tons Main motor: 18.5 kW Back gauge: 1000 mm Bending aid 2 Multi V dies 2 sets of split tools, 260 mm high Hydraulic crowning in the table

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, * Mori Seiki ZT 1500 YB. * Opposed-spindle machine. * Spindle size A2-6, twin spindles. * 2 stacked turrets. * 9-axis controlled turning and milling center. * 2 turrets. * Y-axis upper turret. * 2 C-axes. * Bar capacity: 65 mm. * Two integrated 15 kW motors. * Tool life management and tool wear monitoring. * Two Renishaw automatic tool measurement arms. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. Dksdpj Ahnczofx Ak Aow * Oil cooler for both spindles. * 340 Nm cutting torque. * 15-position turret, all positions motorized. * Automatic workpiece collector. * 1.5-meter bar loader. * Interface for bar loader installation. * Rear automatic part pick-up with a special gripper for long parts. * Max. turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III control. * Max. distance between main spindle and counter spindle: 920 mm. * Main spindle speed: 5000 rpm. * Counter spindle speed: 5000 rpm. * X1 travel: 210 mm. * Y1 travel: +50 / -50 mm. * X2 travel: 210 mm. * Counter-spindle travel: 920 mm. * Number of powered tool stations: 2 x 15. * Capable of holding 30 tools per turret. * Large selection of external and internal tool holders. * Large selection of axial and radial motorized blocks. * Approximate value of equipment: 18,000 euros. * Speed range of powered tools: 5,000 rpm. * Drive motor for powered tools: 5.5 kW. * Rapid traverse X1, X2: 25,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 30,000 mm/min. * C-axis resolution: 0.001°. * High-precision Hainbuch collet chucks on both spindles. * External and internal tool holders. * Motorized axial and radial blocks. * Communication ports via USB, PCMCIA card, and RS-232. * Rear chip conveyor. * Power transformer, documentation, parts list, electrical schematics, programming, and operating manual. * Machine in very good condition. * Machine weight 6.5 tons. * Machine available for inspection while in operation.

Condition: used, Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 1,600 mm, turning length: 20,500 mm, turning diameter: 1,600 mm, spindle speed (max.): 445 rpm, spindle speed (min.): 2 rpm, spindle motor power: 131,500 W, total height: 2,800 mm, total length: 26,500 mm, total width: 2,800 mm, overall weight: 75,000 kg, The machine its in working contition with Simnens sinumerik controller. Dedo Ahqw Dspfx Ak Ajkw 5 pc Stedyrest See attched information

Condition: used, Bystronic XACT Smart 100, 100Ton x 3m, Year 2021.07, Weight 9000kgs. Included is the tooling shown in the photographs. Available for immediate supply. 2021 Bystronic XACT Smart 100/3100 CNC Press Brake with 100 Ton capacity and 3100mm bending length. Tooling included. Available from Prestwick, Ayrshire. Description The Bystronic XACT Smart 100/3100 is a modern CNC press brake designed for accurate and efficient sheet metal bending operations. Manufactured in 2021, this machine offers a 100-ton bending capacity and a 3100mm bending length, making it suitable for a wide range of fabrication, engineering and subcontract manufacturing applications. Offered from our Prestwick facility in Ayrshire, the machine is supplied complete with the tooling shown in the photographs and is available for immediate inspection. The XACT Smart range is renowned for its straightforward operation, high bending accuracy and reliable performance in both jobbing and production environments. Key Features: Dedpfxs Ad U T Ij Ak Ajkw 100 Ton bending capacity 3100mm bending length Year 2021 CNC controlled Approximate weight 9,000kg Tooling included as shown Immediate availability Inspection welcomed This machine represents an excellent opportunity to acquire a late-model European CNC press brake at a substantial saving against new replacement cost.

Condition: used, Manufacturer: GEMINIS Model: GHT5 G2 1000 x 3000 Cnc : SIEMENS Year : 2007 Distance between points : 3000 mm Max. Swing over bed : 1000 mm Max. Swing over saddle : 680 mm Main shaft hole diameter : 104 mm Turning speed : 1400 rpm Main motor : 37,5 kw Cross slide travel : 8m/min Tailstock quill diameter : 140 mm Djdpfj Adr Rqox Ak Aekw Quill traverse : 300 mm Bed width : 550 mm Machine equipped with: A 4-jaw chuck, 800 mm diameter

Condition: used, Year of construction: 2006, 1 used CNC cylindrical grinding machine Manufacturer: Cetos Type: BUC 85C-CNC-3000 Year of manufacture: 2006 Control system: Siemens 840 D Grinding length: 3000 mm Maximum grinding diameter: 850 mm Weight: 20 tons Dkedpfs Ahwfxsx Ak Asw Dimensions: 8970 x 4315 x 2900 mm Includes belt filter system.

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 Dkodpfx Astvf Htsk Aew - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Condition: reconditioned (used), Year of construction: 2016, operating hours: 20,564 h, turning diameter over cross slide: 742 mm, turning length: 700 mm, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, turning diameter over bed slide: 920 mm, overall weight: 4,700 kg, bar diameter (max.): 80 mm, CNC Lathe Manufacturer: DMG MORI Dkjdpfx Aksyvvt Se Ajw Model: NLX 2500 Y | 700 Year of manufacture: 2016 Control system: Celos Mitsubishi M730U Technical specifications: - Turning diameter: 366 mm - Turning length: 700 mm - Swing over bed: 920 mm - Swing over cross slide: 742 mm - Max. spindle speed: 4,000 rpm - Drive power - main spindle: 18.5/18.5/15 kW - Max. bar diameter: 80 mm - Number of tool stations: 12 pos. - Tool interface: BMT 80 - X-axis: 260 mm - Z-axis: 795 mm - Y-axis: +/- 50 mm - Tailstock taper: MT5 - Operating hours: approx. 20,564 h - Power-on hours: approx. 28,664 h - Machine weight: approx. 4.7 t The machine has been refurbished with the following components: - Ball screws in X, Y, and Z axes - New main spindle - Complete maintenance package - Re-aligned and calibrated This puts the machine in like-new technical condition. Equipment & accessories: - Tool turret, 12 pos. BMT 80, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang length for driven tools: 100 mm - Scraper-type chip conveyor - High-pressure coolant system (5 bar) - Coolant shower at main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical interface for 150 mm oil mist collector - 4-color signal light - EtherNet/IP interface for automation 2 machines are available. Price per unit. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, total height: 2,700 mm, total length: 9,000 mm, total width: 3,400 mm, Year of manufacture: 2014 Dkodpfxex Hwhxo Ak Ajw Colour: White Empty weight: 4.500 kg - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: Yes - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool holder: HSK-F63 - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 2.250/0-791 - └ Year of manufacture: 2014 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum pressure [bar]: 200 - CNC options: Manual control - CNC documentation available: USB stick - Working range X [mm]: 5200 - Working range Y [mm]: 1550 - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 - Transport dimensions: 9000mm x 3400mm x 2700mm (l x w x h) - Transport weight [kg]: 4500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2009, XYZ Proturn SLX 1630 (2009), 400mm Swing Over Bed, 216mm Swing Over the Cross-slide, 760mm between Centres, 54mm Spindle Bore, 2500rpm Spindle, 5.75kW Spindle Motor, Prototrak SLX Control, 3 Jaw chuck, QCTP, Tailstock, Coolant. Machine Weight: 1530kg. Country of Origin: United Kingdom Dkedo Ah E T Iepfx Ak Asw Location: These lots are located in Leicester and Coventry, UK. Please see individual lot for dismantling and loading charges.

Condition: used, Used, well-maintained CNC tool milling machine MIKRON, model: WF 7D, with HEIDENHAIN control. Table clamping surface: 600 x 1200 mm Travel distances: X-axis, Y-axis, Z-axis 900 mm, 560 mm, 500 mm Spindle mount: SK 40 Spindle speed, continuously adjustable: 5 – 5000 rpm Feed rate, longitudinal and transverse: 0 – 8000 mm/min Dksdpfxe Ahz D Ae Ak Aow Rapid traverse, longitudinal and transverse: 8000 mm/min Feed rate, vertical: 0 – 6000 mm/min Rapid traverse, vertical: 6000 mm/min Drive power, main drive: 8.5 / 11.5 kW Dimensions W x D x H: 240 x 360 x 220 cm Weight approx. 4500 kg Technical data and dimensions: Subject to change.

Condition: used, Year of construction: 2013, operating hours: 48,437 h, spindle speed (max.): 7,000 rpm, overall weight: 9,800 kg, CNC Lathe Manufacturer: DMG MORI Type: SPRINT 50 3T+B Year of manufacture: 2013 Technical details: Spindle speed: 7,000 rpm Number of tool stations: 3 x 12 Machine weight: approx. 9.8 t Operating hours: approx. 48,437 h Dsdpfxj Advfrs Ak Aokw Spindle hours: approx. 33,559 h Condition: used Available from December 2026 Technical features & accessories: - 2 cross slides - 3 turrets with 12 stations each (all driven) - Main and counter-spindle - 2 C-axes - 3 Y-axes - Y-axis on slides 1 and 2 - Chip conveyor - LNS bar loader - Workpiece unloading system - Differential pressure clamping system for counter-spindle - Z-Y axis for slide 5 - Emulsion cooling system - Conveyor belt for finished workpieces (external to the machine) - Electrical and software interface for oil mist extraction system - B-axis Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, Year of construction: 2013, Mori Seiki NLX2500-700SY CNC Lathe with C&Y Axis, Barfeed Unit. (2013), Swing Over Cross-slide 360mm, Maximum Cutting Diameter 366mm, Maximum Cutting Length 705mm, Bar Capacity 80mm, Spindle Speed 4,000rpm, Milling Speed 10,000rpm, Main Spindle Power 18.5Kw, C Axis 0.001 degrees, Y axis -/+ 50mm, 12 Station Turret, Mori Control M730BM, equipped with Toolsetter, Swarf Conveyor, 3 Jaw Chuck, Parts Catcher. S/No. NL254130462. Country of Origin: Japan Djdpfx Ae Ah E Aaek Askw Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2007, Mazak Integrex E500H-II Multi-tasking CNC Lathe (2007), Maximum Cutting Diameter 820mm, Maximum Cutting Length 1500mm, C axis 0.0001 degrees, B Axis -30/+210 degrees, 40 ATC, Spindle Speed 1,600rpm, Milling Speed 10,000rpm, Main Spindle 37Kw, Spindle Taper din50, Y axis -/+ 250mm, Mazatrol Matrix Control, Swarf Conveyor. S/No. 186364. Country of Origin: Japan Location: This lot is located in Leicester, UK. A charge of £375 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Dedpfx As Ah E Dbsk Aekw

Condition: ready for operation (used), Manufacturer: Leistritz AG, Nuremberg Type: POLYMAT 50/400 CNC-S Year of manufacture: 1990 Control system: Leistritz POLYMAT CNC (fk electronic) Maximum cutting width: approx. 50 mm Maximum working stroke: approx. 400 mm Maximum pulling force: approx. 15.9 kN Feed per stroke: approx. 0–0.5 mm Maximum cutting speed: approx. 20 m/min, continuously variable Dkodpfx Ako Ah Ivnj Aew Maximum return speed: approx. 40 m/min Table size: approx. 440 × 595 mm Hydraulic drive: approx. 5.5 kW Connection: 380 V / 50 Hz Machine weight: approx. 1,700 kg

Condition: excellent (used), Year of construction: 2004, INDEX C65 turning and milling center + Kompaktbandfilter micro-filtration unit, year 2004. Dkodpfx Ao Ah Hzbek Aew 3 x 12 tools (turret type) 200 H + 300 cm conveyor belt - FMB Turbo 10-72XT, year 2005, With its tool cabinet and contents.