Used Cnc Welding Machine for sale (66,923)

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Nodpfxewz Rife Ai Ajlh Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, machine/vehicle number: 008562, X axis working area: 2465 mm Y axis working area: 1260 mm Working Table: Flat table Nledjzvwilopfx Ai Aeh Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 16

Condition: good (used), Year of construction: 2012, Ref. -No.: 10659 Manufacturer: DECKEL MAHO Type: DMC 835V Year of construction: 2012 Type of control: CNC Control: Haidenhein iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 1541XXX X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Number of T-slots: 5 Max. Tool Weight: 6 kg Max. Tool Length: 250 mm Max. Tool Diameter: 80 mm Nodpezw Tw Usfx Ai Aolh Tool change time: 1,6 s T - groove width: 14 mm T - slot spacing: 100 mm Tool Taper: SK40 Numbers Of Tools In Magazin: 30 Spindle Speed: 12000 RPM Max. Torque: 130 / 87 Nm Turning Speed Range - Stepless: 30 mm / min Total Power Requirement: 35 kW Dimensions Of The Machine Ca.: 4,5 x 3,5 x 2,7 m Weight Of The Machine Ca.: 5 t Changeover time chip - chip: 6 sec Feed rate: 1 - 20.000 (X / Y / Z) High pressure cooling: 20 bar Further information: The machine can be inspected while powered on by prior arrangement.

Condition: used, Year of construction: 2011, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller manufacturer: MORI SEIKI, controller model: M730BM, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 500 kg, overall weight: 11,100 kg, Equipment: chip conveyor, With dual pallet, Mori Seiki M730BM control system. Nlsdpfx Aisz Sqrks Aoh Workholding and tooling not included. AVAILABLE: late January/early February 2027.

Condition: used, Year of construction: 1995, CNC portal cutting machine Manufacturer: Messer Type: Omnimat P 7000 Year of manufacture: 1995 CNC control: Global Control Plus Track gauge: 7,000 mm 8 x oxy-fuel cutting torches, type ALFA 8 x Omnilift 200 Without rail system Nedoyay Dhspfx Ai Aslh Without table Without filter 191026ä

Condition: used, Year of construction: 2016, Working area X-Y-Z: 5300 x 1700 x 180 mm Travel range X-Y-Z: 6040 x 1810 x 280 mm Drilling head with 30 + 8 spindles Speed: 6000 rpm Power: 2.2 kW Automatic central lubrication Work table TV with 10 supports, L=1500 4 working areas 2 cross lasers Vacuum pump 250 m³/h PC control, Windows Vertical milling unit ISO 30, 7.5 kW with tool changer RAPID 14 and vector axis Additional drilling unit (E-axis) Dongle for XILOG software Nodpfjy Dta Sox Ai Aslh Storage location: Sonnefeld

Year of construction: 1997, condition: used, Electrical power: 7kW, operating voltage: 380V, frequency: 50Hz, control voltage: 220V, current: 35A, control: Heidenhain. An on-site inspection is possible. Nledjz S Iwwspfx Ai Aoh

Condition: excellent (used), FANUC Power Mate control Grinding range 800 x 400 mm Wheel diameter / width / bore 250/ 50 / 127 mm Magnetic plate 800 x 350 mm Misc. accessories Nedpfxjyla Nuj Ai Aslh MARCELS MASCHINEN CH

Condition: used, Year of construction: 2020, CNC gantry plasma cutting machine with skew rotator bevel cutting head Manufacturer: Messer Type: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 10.8 m Track width: 4,000 mm 1 oxy-fuel torch ALFA 1 plasma torch with skew rotator bevel cutting head Power source: Hypertherm XPR300 Cutting thickness: 50 mm piercing 80 mm cutting Nlodpfox Dlwmjx Ai Aeh Extraction table Beuting without filter system Software: Omniwin with Bevel 191026ä

Year of construction: 2022, condition: excellent (used), 5-axis Machining center independent clamp movement 16 positions tool magazine chip conveyor belt (horizontal) 2° chip conveyor belt (vertical) tool lenght probe 10 toolholders HSK 63 UPS 11 kW spindle with liquid cooling 5 axis blade diam 450 mm Nlsdpfx Aeu A Uq Ioi Aoh automatic greasing kit extra blade unit 90° on moveable carriage wireless bor code reader

Condition: used, Technical details: current capacity: 100 kVA throat: 250 mm arm distance: ca. 400 mm current capacity: bei 50%=63 kVA total power requirement: 100 kVA weight of the machine approx.: ca. 600 kg space requirements of the machine approx.: L:1,2xB:0,8xH:1,6 m Spot Welding Machine - capacity by 50% ED: 63kVA, secondary voltage 4,4-10,8 Volt - operational current by 10 % ED 26kA, secondary short circuit current 44kA equipment: Nedpfx Aeu Nwxbei Aelh - control over plant type E 0423.2 -eltros II from LEW Henningsdorf - foot control Machine not tested, on sale as is! i.D. *

Condition: used, Year of construction: 2012, CNC laser cutting machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC control: iMSNC Windows Approximate laser operating hours: 4,000-5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Sheet metal thickness, steel (max.): 15 mm Nodpfx Aex Eh Drei Aolh Sheet metal thickness, stainless steel (max.): 8 mm Sheet metal thickness, aluminum (max.): 8 mm Operating temperature: +10 to +30 °C and max. 90% humidity (at 20 °C) Extraction duct (left and right): outlet on the left, Ø 250 mm Laser source: IPG Ytterbium laser system YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3P / 50 Hz Filter system: TEKA 4H 5.5 kW External dimensions, overall machine: approx. 10,400 x 3,610 mm 191026ä

Condition: used, machine/vehicle number: 008564, X axis working area: 2465 mm Nodpfx Aiszvwh Is Aslh Y axis working area: 1260 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 16

Condition: used, Shank cutters and drill bits in mint condition, unused, sharpened and second-hand, for CNC machines, as shown in the examples. Technical data: - Length: Various Nlsdpfx Ajzrybpji Ash - Diameter: Various - Shank: Various - Weight: 12 kg - Application: Woodworking

Condition: good (used), Parts shown by hand not come. Machine is in good working condition Nljdpfx Asz Ipaqji Ash

Condition: used, Year of construction: 2006, A CNC laser cutting machine with a 5kW CO₂ laser and automatic loading and unloading system is offered. Working area X/Y/Z: 4000mm/2000mm/115mm. Laser power: 5000W. Laser unit: CO₂ laser TLF 5000. Max. sheet thickness mild steel: 25mm. Max. sheet thickness stainless steel: 20mm. Max. sheet thickness aluminum: 15mm. Operating hours: Laser-on hours: 39625h. Beam-on hours: 14346h. Control: Siemens Sinumerik 840D. The system is equipped with an automatic loading system that supports sheet metal handling. Inspection possible by prior arrangement. Nsdpjz Sr Nkofx Ai Aelh

Year of construction: 2004, condition: used, Emmegi Comet Isola, 4 Axis CNC Vertical Machining Centre for Milling, Drilling and Tapping Aluminium with Emmegi CNC Control (Isac Cam Editor), Bed Length 6800mm, X Axis 5500mm, Y Axis 525mm, Z Axis 380mm, Pneumatic Vices and Auto Vice Positioning. S/No. M271748 (2004) Machine Weight 5300kg Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Nlodpfx Aioz Rnwzj Aeh

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches Nodpjzc Dziefx Ai Aelh - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10662 Manufacturer: STARRAG HECKERT Type: HEC 1250 Athletic Year of construction: 2009 Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 221XXX Nedpfjz Adt Rjx Ai Aslh X-Travel: 2200 mm Y-Travel: 1600 mm Z-Travel: 1850 mm Spindle Diameter: 100 mm Max. Tool Weight: 35 kg Max. Tool Length: 800 mm Max. Tool Diameter: 250 mm Clamping Area: 1000 x 1250 mm Tool Piece Magazine With: 60 Pcs./pcs. Max. Torque: 25.000 Nm Turning Speed Range - Stepless: 40000 mm / min Rapid Traverse: 40 m / min Numbers Of Pallets: 2 pallet change time: 47 s Weight Of The Machine Ca.: 26,5 t Position uncertainty P: 0,008 mm Position deviation Pa: 0,006 mm Positional dispersion Ps: 0,005 mm Maximum table rotation: 10 RPM Further information: - Design: Thermally symmetrical column design with optimal chip flow for machining castings. - Applications: Mechanical engineering, energy technology, and the machining of large gearboxes and engine components. - Powerful motor spindle (up to approx. 82 kW, depending on the model) for heavy-duty machining. - The Heckert HEC 1250 Athletic (built in 2009) is a high-performance, modular 4-axis large-scale machine for the precise complete machining of heavy workpieces. The machine can be viewed while powered on by prior arrangement.

Condition: excellent (used), Year of construction: 2018, Manufacturer: TEKNA Model: TKE 984-6 Design: RFT Year of manufacture: 2018 Machine type: CNC machining center with moving gantry Axes: 4 Suitable for: Drilling, milling, threading, and machining of aluminum, PVC, light metal, and steel profiles X-axis travel: 6,700 mm Y-axis travel: 1,350 mm Z-axis travel: 610 mm Swivel range of machining head: -90° to +90° Positioning resolution of swivel axis: 0.01° Electro spindle: 9 kW Max. spindle speed: 24,000 rpm Max. torque: 14.3 Nm Tool interface: HSK 63F Spindle cooling: Water cooling with chiller Clamping devices: 6 clamps Automatic positioning of the clamps via the X-axis Tool magazines: 3 fixed magazines Tool positions: 14 per magazine / total 42 tool positions Chip conveyor: Rubber belt chip conveyor, design 6,700 mm Measuring system: 3D measuring system for multiple scanning Additional tank for lubrication system: 15 liters Integrated cabin Separate electrical control cabinet Glass scale on the X-axis Customer-specific clamping device system for profiles X-axis with 2 motors in master/slave configuration Laser length measuring tool instead of the standard version 2 feed pipes for lubrication Multi-part machining Double-mode operation / machining in two work areas Parallel machining of two profiles possible Drilling capacity aluminum AL99: max. Ø 20 mm Drilling capacity steel FE370 D FF: max. Ø 14 mm Straight milling aluminum AL99: max. 15 mm material thickness Straight milling steel FE370 D FF: max. 5 mm material thickness Nedpfx Aoz Er Hhsi Aolh Thread cutting aluminum: up to M12 Thread cutting steel: up to M8

Condition: good (used), Year of construction: 2000, Ref. -No.: 10588 Manufacturer: HEDELIUS Type: CB 70 - 3200 Year of construction: 2000 Type of control: CNC-Steuerung Control: Heidenhain TNC Storage location: Halberstadt Country of origin: Germany Machine-No.: 0032XXXX Space requirement: 7200 x 3400 x 3100 Length x width x height (mm) X-Travel: 3200 mm Y-Travel: 720 mm Z-Travel: 600 mm Table Height: 900 mm Number of T-slots: 5 Max. Workpiece Weight: 3000 kg Max. Tool Length: 330 mm Clamping Area: 3900 x 650 mm T - groove width: 18 mm T - slot spacing: 125 mm Tool Taper: DIN 69871 AD 40 Spindle Speed: 30 - 8000 RPM Max. Torque: 102 x 240 Nm Feed Speeds X/Y/Z Axis: 30000 mm / min Rapid Travel X/Y/Z: 30 / 30 / 30 mm / min Total Power Requirement: 50 kW Borehole Diameter: 28 x 44 mm Max. Feed force: 9000 / 9000 / 9000 kN Distance between spindle nose and table: 140 - 740 mm Number of tools: 30 Pcs Tool clamping: Tellerfeder Max. milling capacity: 400 x 600 Max. thread diameter: M20 x M30 mm coolant: 250 bar Further information: - L = 7.50 m Special accessory: automatic door - H = 3.60 m Special accessory: full cladding of working area - Ø 125 mm only with free side spaces 35 mm Nlodpfszc D Atjx Ai Ash The machine can be viewed under power by arrangement.

Condition: used, Technical details: Nlsdpeu Ngfqefx Ai Ash plate thickness: 10 mm material thickness: 4,5 - 10 mm capacity in W: 2000 Watt voltage: 220 mit 4 Meter-Kabel V machine weight approx.: 18 kg dimensions of machine: L: 550 x B: 120 x H: 260 mm WELDING EDGE SHAPER - GRINDING MACHINE or PLATE SHAPER Hand tool Application: cutting and notching of plate-shaped workpieces Material thickness depends on material (max. 10mm) Tool = lower knife (die) and upper knife punch) optional with accessories As in the picture, for 200,00 Euro *

Condition: used, machine/vehicle number: 008744, X axis working area: 3050 mm Nsdpfxsz Ig Ufj Ai Aslh Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4

Condition: good (used), Plates Size: 520x520x40mm We have 16 plates in the stock Nljdpfxel D Nxks Ai Ajh Price for one plate 450 eur

Condition: used, total height: 2,500 mm, total length: 40,500 mm, total width: 2,400 mm, Year of manufacture: 2009 Colour: Blue Empty weight: 30.900 kg Price: On request 4 tool changers, 24 pcs each Plus external magazine 117 positions Drilling unit 2, 4x horizontal only Incl. Oertli tools Max. machining length 6 meters NEXUS Software (HMI) Output table 320x360 cm Operating hours cannot be read out - Year: 2009 - Documentation available: Yes - CE marking present: Yes - Serial number: 113040 - Number of milling spindles [pcs.]: 6 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Min. spindle speed [rpm]: 0 - - Max. spindle speed [rpm]: 18000 - - Main motor power [kW]: 20 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - └ Milling spindle 3: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - └ Milling spindle 4: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - Tool holder: HSK-F63 - Drilling unit present: Yes - └ Motor power [kW]: 2.5 - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 6 - Tool changer positions [pcs.]: 24 - System/software: Nexus - Safety feature: Enclosed fence, Door interlock switches Njdpfxozt Nadj Ai Aslh - Tools included: Yes - CNC options: Unloading system, Loading system, Label machine - Table length [mm]: 6000 - Table width [mm]: 3800 - Installed length [mm]: 26000 - Installed width [mm]: 9500 - Installed height [mm]: 2850 - Transport dimensions: 40500mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 30900kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels