Used Combination Folding Machine for sale (69,006)

Condition: used, Year of construction: 1994, The Mathias Baeuerle CAS 524 SE, manufactured in 1994, is a machine equipped with four pockets and a flat stack feeder. It features a single cross-cutting unit, enhancing its functionality. This model has a format of 520 x 720 mm and is currently located in Germany, available in storage. Format: 520 x 720 mm Equipment: 4 buckle plates Fpodsv Di Srspfx Al Usn vertical pile feeder 1 Knife

Condition: excellent (used), sheet width 1270 mm plate thickness 1.75 mm ST plate thickness 2.00 mm ALU Fpodjxaa S Dopfx Al Ujn plate thickness 2.50 mm KU thickness at "Niro-steel" 0.80 mm distance between columns 1300 mm daylight opening OW ~ 380 mm work height max. 900 mm adjustment UW 60.0 mm bending angle max. 180 ° weight ca. 200 kg kg range L-W-H 2000 x 520 x 1500 mm good condition (!!) Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description * Machine link : ?machineno=1008-9355182

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x580x1120 mm Fpsdpovz Eqxofx Al Usn Weight 280 kg Total power requirement 2,2 kw

Condition: used, Year of construction: 1970, machine/vehicle number: 10186, Falzmaschine / Folding machine Serial-No. 10186 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Fsdpfx Alstzc I Ro Uopn On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1974, distance between columns 300 mm table length 3550 mm table width 190 mm table height 800 mm distance between columns 3230 mm column arm 300 mm weight of the machine ca. 12,5 t dimensions of the machine ca. 1600 x 3800 x 2800 m Fpsdex U A Rzspfx Al Uon

Condition: ready for operation (used), functionality: fully functional, Equipment: compressor, Very nice folding machine with new rubber rollers for sale. Includes perforating, scoring, and slitting wheels. Vacuum and air input, max size 35 x 45 cm. 30,000 sheets per hour, 230 voltage, made in Germany. You are welcome to test this machine at our location. We can arrange transport and packaging for you and load it into a truck or container. Please request a price including transport (location within the Netherlands). If you would like to purchase this machine, please send us your company details and VAT number. Fsdpfx Ajzlgpaol Uepn We will then send you a proforma invoice. Regards, Henk Hoos.

Condition: used, Year of construction: 1989, Format: 350 x 500 mm Fpjdpfjyzrucsx Al Uon

Condition: ready for operation (used), Year of construction: 2008, Material thickness range: 0.6mm-10mm, sheet width min./max.: 2x700mm/2x1000mm, sheet length min./max.: 500mm/700mm, max. production speed: 1000 boxes/h, registration accuracy: +/-1mm, machine dimensions X/Y: approx. 6200mm/2950mm, weight: approx. 1000kg. Includes a pressure belt. Documentation available. An on-site inspection is possible. Fpedpfxjw Na Hbe Al Uen

Condition: good (used), Year of construction: 2001, MB Baeuerle Multipli CAS-524 flat pile feeder 4 buckle plates noise reduction hoods Fpjdpfx Aloh Ighhs Uen delivery conveyor belt

Condition: used, 4-pocket folding machine, Multipli 35 Suction feeder Sheet alignment section Stack counter with control Shingle delivery Fsdpfx Asz Epbpsl Ujpn Includes accessories and documentation 230V/50Hz

Condition: used, Year of construction: 1980, Falzmaschine - Folding Machine Stahl K56/4-KTLBaujahr / Year approx 1980 - Serial-No. 16760 Flachstapelanleger / Flat Pile Feeder Falztyp: 4 Taschen - Schwert - Seitentasche - Schwert Folding Type: 4 buckles - 1 knife - 1 side buckle - 1 knife Format / Size: min. 140 x 180mm - max. 560 x 9000mm Papiergrammatur / Paper weight: 40 – 250(g/m²) Stapelhöhe Anleger / Pile height: max. 80cm Auslage Schuppenauslage / Delivery Stream Delivery Kompressor / Compressor include - Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Fsdpfx Alolcfk Do Ujpn Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2024, functionality: fully functional, SAW Fpsdpfxezxptho Al Uon table length: 2600 mm scoring saw blade angle adjustment blade height adjustment (up/down) maximum blade diameter: 300 mm ROUTER spindle diameter: 35 mm spindle speed: 2000/3100/4400/7000 rpm spindle height adjustment (up/down) PLANER/THICKNESSER working width: 410 mm 3-knife cutter block table length: 1800 rpm maximum material height: 220 mm single-speed feed HORIZONTAL DRILLING MACHINE

Condition: used, Year of construction: 1993, Used Machine Year of manufacture: 1993 Fjdpfxszwqdxj Al Uepn Features and Technical Specifications: - Working/planing width: 520 mm - Max. thickness planer passage height: 240 mm - Total length of the planing tables: 2,200 mm - 4-blade TERSA planing spindle - Planing spindle diameter: 120 mm - Planing stop swivels up to 45° - Solid cast iron planing tables - Feed speed: up to approx. 17 m/min - Thickness planer table with height adjustment - Integrated exhaust hood

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, power: 2 kW (2.72 HP), warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, The Yawei HPML30510 is a combined laser punching and cutting system for highly precise and efficient sheet metal processing in industrial applications. The machine combines servo-electric punching with laser cutting, achieving high processing speeds while maintaining low energy consumption. Thanks to its robust construction, automated systems, and modern CNC technology, the HPML30510 is particularly well-suited for demanding series production. The machine offered here is a demonstration model, in stock, immediately available, in new condition, and is offered with delivery (within Germany), commissioning, warranty, etc. It includes a comprehensive set of tools. It can be tested under power. Fpodpfx Asz D Th Dsl Ujn Operating mode: Servo punching / laser cutting Punching force: 294 (30) kN (t) Laser power: 3000W Max. processing size (punching): 1600 x 3000 mm Max. processing size (cutting): 1500 x 2500 mm Max. material thickness: 6.35 mm (sphere) / 3 mm (brush) Max. punching diameter: 88.9 mm Stroke rate: 2000 cpm Punching frequency (1mm pitch): 700 cpm Punching frequency (25.4mm pitch): 400 cpm Accuracy (punching/cutting): ±0.10 mm Combined accuracy: ±0.15 mm Clamps: 4 pcs Tool stations: 38 pcs CNC system: Siemens 840Dsl CNC axes: 11 Max. sheet metal speed: 102 m/min Turret speed: 30 rpm Max. load: 180 kg Dimensions (length): 8000 mm Dimensions (width): 8000 mm Dimensions (height): 2300 mm Machine weight: 20000 kg

Condition: new, Year of construction: 2023, neu 2023 8286 prompt, Zwischenverkauf v Türkei 2990 € 1 2040 mm 0.8 mm Fpsdpeynmxbjfx Al Uon 70 ° 2400 mm 750 mm 850 mm 290 kg straight upper tool moveable manual cutting device

Condition: used, functionality: fully functional, infeed width: 740 mm, Folding machine MBO K 74/4 KL with flat pile feeder. Paper size: min15x25cm to max. 74x112cm speed: 30-150 m/min with belt delivery and compressor. Fpsdpfstvfqwjx Al Ujn In function, can be tested. Folding rollers renewed in 2017.

Condition: used, sheet width 2000 mm plate thickness 3,5 mm distance between columns 2050 mm Fpodpfx Aey Aa Igjl Usn daylight opening 355 mm weight of the machine ca. 2,8 t dimensions of the machine ca. 3,5 x 1,5 x 1,5 m Bending machine - Bending angle preselection via limit switches

Condition: used, Year of construction: 2000, sheet width 3020 mm plate thickness 5 mm distance between columns 3020 mm Control Simatec OP7 stroke 450 mm back stop - adjustable 2000 mm work height max. 900 mm total power requirement 22 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 4200 x 1600/2900 x 2000 mm Features: - Motorized rear stop, 1000 mm - Hydraulic upper beam adjustment - Motorized lower beam adjustment - Hydraulic tool clamping - Side guard - Foot switch Fsdpfjyk Dicox Al Uspn - Operator's manual

Condition: good (used), Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies Fpjdpfx Alefndy No Uon -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Fjdpfettc Uajx Al Uopn

Condition: used, Year of construction: 2010, The Horizon AFC 566 FKT + PST-40 folding machine, manufactured in 2016, is a high-performance solution for efficient and precise folding operations. Currently in production and located in Germany, this machine is designed to handle a wide range of sheet sizes, from a minimum of 60 x 64 mm to a maximum of 558 x 850 mm, with a maximum mechanical speed of 240 m/min (30,000 cycles/h). Equipped with a flat pile feeder capable of handling a maximum pile height of 740 mm, it ensures continuous and efficient paper feeding. The primary folding unit is an AFC-566 FKT with 6 combi folding plates, offering manual pocket and roller configuration. It features a used condition roller and a cross fold unit with 1 knife, providing versatile folding options with a maximum working width of 558 mm and a maximum fold length of 850 mm. The machine also includes a noise protection hood and touch screen control for ease of operation. The delivery mode is a PST-40 press delivery, manufactured in 2010 with the serial number 360003. It has a maximum working width of 440 mm and a pressing force of 20,000 N, ensuring efficient and organized output handling. This machine is well-suited for businesses seeking to enhance their folding capabilities with a reliable and high-performance solution. Format: 440 x 310 mm Equipment: Feeder Feeder Mode: Flat pile feeder Max. pile height: 740 mm Folding Units 1st unit Type: AFC-566 FKT Pockets: 6 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Working width max: 558 mm Fold length max: 850 mm Cross fold unit with 1x knife Noise Protection Hood Touch Screen Control Delivery Delivery mode: PST-40 Type: Press delivery Year: 2010 Serial number: 360003 Working width max: 440 mm Technical Details Sheet size max: 440 x 310 mm Sheet size min: 60 x 64 mm Infeed height min: 280 mm Mechanical speed max: 240 m/min Pressing force: 20,000 N Built-in controller Technical details: Fpedpfx Aljwcqw Sj Ujn Sheet size max: 558 x 850 mm Sheet size min: 128 x 148 mm Max. mechanical speed: 240 m/min Max. mechanical speed (cycles): 30,000 cycles/h

Condition: like new (used), functionality: fully functional, Very nice paper folding machine with automatic settings. Fpsdoztxrispfx Al Usn Brand: Superfax, type Pf-220. (Uchida 43N) Output: More than 10,000 sheets per hour, 220 volts. Digital counter with automatic repeat function. Suitable for single fold, letter fold, zigzag fold, double parallel fold, and fold-out. Cross-folding capability, folding twice across the machine. This machine is in very good condition and is fully functional. You are welcome to test this machine at our location. We can arrange transport and packaging and load it into a truck or container for you. Please inquire about a price including transport (within the Netherlands). Best regards, Henk Hoos. Netherlands.

Condition: good (used), Year of construction: 1987, Motorized folding machine Fab. FASTI Typ. 213-20-10 year 1987 Technical data Make: Fasti Type: 213-20-10 Year of construction: 1987 Effective length: 2040 mm Sheet thickness: 10 mm Stroke upper beam: 500 mm Lower beam stroke: 80 mm Fpjdpfxsum Ttzj Al Usn Dimensions: approx. L 4.40 x W 2.00 x H 2.40 m Weight: approx. 8 tons Equipment - Central lubrication - Bending beam drive on both sides - Potentiometer with digi-display for bending angle - Bending rail 35 mm - Focusing rail 45° All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: new, sheet width 1270 mm plate thickness 2.0 mm daylight opening 48.0 mm daylight opening 150 mm ohne Segmente bending angle max. 0 - 135 ° work height max. 900 mm Fjdpfoxabquox Al Uepn weight of the machine ca. 465 kg dimensions of the machine ca. 1620 x 1070 x 1280 mm Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam - Universally usable bending machine for sheet metal works and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending possibilities - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for the production of high folded profiles Scope of delivery : - Segmented upper, lower and bending beam - manual backgauge - Corner segment left / right each 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 200 | 250 | 270mm

Condition: new, sheet width 1020 mm plate thickness 2.5 mm daylight opening 48.0 mm daylight opening 150 mm ohne Segmente bending angle max. 0 - 135 ° work height max. 900 mm weight of the machine ca. 340 kg dimensions of the machine ca. 1350 x 820 x 1300 mm Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam - Universally usable bending machine for sheet metal works and repair shops Fodpfsxaa E Dox Al Uepn - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending possibilities - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for the production of high folded profiles Scope of delivery : - Segmented upper, lower and bending beam - manual backgauge - Corner segment left / right each 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 |200 | 270 mm