Used Combined Drawing for sale (5,984)

Condition: like new (used), Year of construction: 2024, For sale is a used Hammer A3-41 planer-thicknesser with a planing length of 1800 mm. The machine has been inspected by our specialist staff and is in mint condition. Dedjv Scx Ujpfx Ap Ioku Technical specifications: - Planing thickness width 410 mm - 3 knife blocks (reversible knives) - Dual folding planing tables - Planer stop pivots 90-45° - Thicknessing height 4-225 mm - 5.5 HP (4 kW) motor / 400 volts - Year of manufacture 2024 - Machine number 52.02.285.24 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: planer, thicknesser, planer, planing, thicknessing Reference: R-L0J2U

Condition: used, Year of construction: 1973, pressure 1000 t distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Djdpfsynmm Sex Ap Ijku Cut Shock absorption hydraulic Control Siemens S7 height over floor 7,7 m total power requirement 300 kW weight of the machine ca. 280 t dimensions of the machine ca. 5,75 x 4,3 x 9,55 m Year of construction 1973 Modernization 2005 with oil-hydraulic drive, hydraulically controlled drawing cushion in the table and Ram, hydraulic cutting impact damping stored dismantled - short video available from the seller before dismantling

Condition: used, Year of construction: 1973, pressure 1000 t distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Dodpeyn R D Uefx Ap Ioku Cut Shock absorption hydraulic weight of the machine ca. 280 t The machine was overtaken 1999.

Condition: used, Year of construction: 1973, pressure 1000 t distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Cut Shock absorption hydraulic weight of the machine ca. 280 t The machine was overtaken 1999. Dksdpfx Aoyn R Elsp Iju

Condition: excellent (used), SICAR Thickness Planer, Italian-made Dkedpfx Apoyvhixo Iou Planing width: 500 mm 4 knives 4 feed speeds Thickness table mounted on 4 screws Electric adjustment of the thickness table Digital planing thickness display Max planing thickness: 250 mm Length of jointer tables: 200 cm Electric brake Adjustable jointer fence Motor: 4 kW Machine tested, very good condition Weight approx. 700 kg

Condition: used, Year of construction: 2021, front tire size: TRAKRIDE 30 Zoll, rear tire size: 620/70R26, SW Fendt 9.20m SuperFlow VarioGuide Standard Trimble SmartConnect Hectare: 770 / crawler track Reversing camera AGCOPower engine 451 hp / Dedpfx Aer Uavkep Isku

Condition: like new (used), For sale is a used Felder AD7-41 surface-planer thicknesser with a planing thickness up to 230 mm. The machine is in use as a demonstration unit in our showroom and is therefore in like-new condition. Technical specifications: - 4-knife cutterblock - Planing width: 410 mm - Table length: 2000 mm - Max. workpiece height: 230 mm - Electric thickness adjustment PowerDrive - Extraction port Ø 120 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! For information call 06244-20299. Dedpsw Hckrjfx Ap Ijku Related terms: surface planer, thickness planer, planing machine, jointer, thicknesser Reference: R-A0117

Condition: good (used), Manufacturer: unknown Year of manufacture: Type: Pipe straightening and drawing machine Pipe diameter: up to 10 mm Pipe length – stop for measurement: 6,300 mm Operation: hydraulic Application: for heating pipes Dimensions: 7,500 x 1,000 x 1,200 mm Weight: approx. 0.5 t Djdpfx Aoygv H Ejp Ijku

Condition: new, - new -BeschreibungMit TERSA cutter block for sekundenschnelles HobelmesserwechselnTERSA-Hobelmessersystem ermögclear opening particularly geräuscharmen Lonangular verzahnte steel input roller for konstanten and gleichmäßigen HolzeinzugDie particularly langen Abrichttische aus einem piece ermöglichen leichtes Abrichten der WerkstückeGroßer surface fence kann beim opening der Abrichttische in seiner Position bleibenNach rear öffnende AbrichttischeDas hohe Maschinengewicht sorgt for höchste Präzision and ruhigen LonLeistungsstarker Industrie-motorRobuste steel-/GraugusskonstruktionArbeitstische aus Grauguss, nachgeglüht and spannungsfrei, dadurch unempfindlich and dauerhaft planarsurfacing table lip plates for geräuscharmen LonAusstattungsdetails:TERSA-HobelmesserwelleKein Einstellen and Schrauben mehrHobelmesserwechsel in SekundenSelbstarretierendBesonders low noisePerfektes HobelergebnisAbsaugschlauch-AnschlussDie suction nozzle der surface planer and thickness zeigen in the selbe Schlauchanschluss erfolgt from nur einer side wird kein Schlauch benötigt, der um the machine veStabil ausgelegter KettenantriebAntriebsräder aus steelMassiver GraugusslagerbockHobelwerkMassive Rückschlagsicherungen verhindern den kick-back from WerkstückenTERSA-Hobelmesserwelle with three Messern sorgt for ein optimales HobelbildDer MaterialeinzugSchrägverzahnte Stahleinzugswalzen for einen konstanten and gleichmäßigen Materialeinzug without AbdrückeMehreright hand Zähne greifen gleichzeitig for kraftvollen feederVerschleißfrei im Gegensatz zu GummieinzugswalzenTechnische Daten:dimensions and Gewichtelength (Produkt) ca.     2015 mmweight (Netto) ca.     330 kgwidth/depth (Produkt) ca.     990 mmdrive powercapacity driving motor     5 kWsurface planertotal length der tables     1800 mmchip removal max. surface planer     4 mmworking height     900 mmAnschluss Absaugungsuction nozzle diameter thickness     2 x 120 mmAufstellinformationenrequired space length     2015 mmMaschinenkörper width/depth     596 mmrequired space width/depth    1 460 mmworking dimensions length     1000 mmErläuterung required spaceDie dimensions berücksichtigen maximale Verfahrwege or Nutzläking dimensions width/depth     3500 mmMaschinenkörper length     659 mmErläuterung zu working dimensionsDie angegebenen dimensions bitte with dem required space addieren, um the for the machine empfohlene freie assembly area zu cknessDickentisch length     605 mmworking height thickness max.     230 mmDickentisch width     420 mmchip removal max. thickness     4 mmworking height thickness min.     3 mmElektrische DatenAnschlussspannung     400 VStromart     ACPhase(n)     3 PhNetzfrequenz     50 HzHobelmesserwelleHobelwellentyp     TERSAHobelwellendrehzahl     5200 min¯¹Hobelwellendurchmesser     72 mmplaning width max.     410 mmnumber of Hobelmesser     3 Stfeederfeed speed     7 m/minincluded in deliveryTERSA-Hobelmesserwelleeloxierter Aluminium-surface fenceNo. 550 3414 Dkedevwga Hjpfx Ap Iju

Condition: new, - new -manufactured by Holzkrafttype FS 41 elite S Tersa DigitalDigitale version with motorischer Dickentischverstellung- Hobelmessersystem ermögclear opening sekundenschnellescutter change soas particularly geräuscharmer Lon- Besonders lange Abrichttische (2200 mm)aus einem piece ermöglichen leichtes  Abrichten derWerkstücke- Arbeitstische sind aus Grauguss, nachgeglüht andspannungsfrei, dadurch unempfindlich and dauerhaft planar- Gleichzeitiges opening der tables- to rear, gleichzeitig öffnende Abrichttische for kurzeRüstzeiten- Leistungsstarker Industrie-motor- Festmontierte dust extraction hood- robuste steel-/Graugußkonstruktion- Gleichzeitiges opening der tables- großer surface fence (serial-production with auxiliary fence)- Materialvorschub with two speeds aboutspearatem motorTechnische Daten:total length der tables:  2200 mmworking width:   410 mmmax. chip removal: 5 mmthickness:dimensions Dickentisches: 775x410 mmmin/max. working height:  3/240 mmfeed speeds: 6/12 m/elwellen D./Hobelmesser: 95 mm/4 piecerpm:   5000 1/minmotor 400 V/50 Hz/S6 - 40 % 5,0 kW (6,6 PS)suction nozzle diameter: 1 x 120 mmweight:    450 kgArt-No.: 550 3441located in: 97447 Gerolzhofen- free on truck- Dkodpfxovwgc Us Ap Isu

Condition: as good as new (ex-display), CMT–VSR Pro is an advanced high-speed core balancing machine including a manually operated, fixed-mount correction cutter that ensures a fine quality surface finish and a servo-controlled air valve to provide the highest measuring accuracy. Dkedpfx Asiihqwep Iou The machine has been designed for the high-speed balancing of turbocharger core assembly of passenger car, light- and heavy-duty trucks. It is used for checking whether there is any unwanted dynamic phenomenon of a rotor at high rotational speed value e.g. the flexural of shaft by the moment of force. Balancing in a full range of rotational speed extends lifespan of turbocharger and eliminates the undesirable effect of whistling. Core is installed on the hub of the machine by the use of a mounting flange with the two clamps to lock it. Turbine wheel is driven by compressed air supplied through a drive sleeve with a nozzle system. During a measurement an oil with an appropriate temperature and pressure is supplied, as a result of which the balancing conditions are similar to those of a combustion engine. As a result, the vibration graph of a core in relation to a rotational speed value and a vibration norm is displayed. In addition, to simplify the analysis of the vibration graph, the software indicates the exact angular position of a mass correction

Condition: used, pressure 160 t throat 360 mm stroke 500 mm table surface area 1250x630 mm ram surface 1000x450 mm table height 1000 mm dayligth 800 mm weight of the machine ca. 8 t Dsdpfjlp U Hgex Ap Ijku

Condition: used, Combined disc + vertical belt sander Dkodelagdwjpfx Ap Iju Disc diameter: 600 mm Encumbrance: 110 x 80 cm, height 160

Condition: new, Type 300C Surface planer: Table dimensions 300х1500 mm Cutterblock diameter 70 mm Cutterhead rotating speed 5700 rpm 3 knives 300x20x3 mm Max table adjustment 4 mm Thickness: Table dimensions 300x660 mm Max cutting depth 4 mm Feed speed 7 m/min Cutterblock rotation speed 5700 rpm Max working height 220 mm Min working height 4 mm Mortising: Table dimensions 250х500 mm Longitudinal stroke 205 mm Trasversal stroke 95 mm Chuck (SX) 16 mm Chuck rotation speed 5700 rpm Motor 2,2 kW Accessories: service wrenches, guards on mortise chuck, planer guide. Dsdsd Nl Skopfx Ap Ieku Weight 290 kg

Year of construction: 2016, condition: not inspected (used), Current hours on tube 3560 (20.000 total lifetime of the tube) PCB width max.: 450 mm x 400 mm Inline X ray + AOI Dkodpou E Icvjfx Ap Isu Working condition to our best knowledge. Please note that machine will be sold without warranty and in as-is condition. We always recommend our customer to do a full OEM service prior to installation of the units to production to ensure the maximum efficiency of the machines!

Condition: new, Description: Planer Surface planer with TERSA quick-change planing knife system With TERSA cutterblock for changing planing knives in seconds TERSA planer blade system enables particularly quiet running Helically toothed steel infeed roller for constant and even wood infeed The particularly long, one-piece planer tables enable easy planing of the workpieces Large planing fence can remain in position when the planing tables are opened Dressing tables open to the rear The high machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction Special equipment features Work tables are made of gray cast iron, annealed and stress-free, making them robust and permanently flat Table lips for quiet running Dkodpfeu Diwlsx Ap Ieu Equipment details TERSA planer cutterblock No more adjusting and screwing Planer blade change in seconds Self-locking Particularly quiet Perfect planing result Suction hose connection The extraction nozzles of the jointer and thicknesser point in the same direction. The hose is connected from one side only. No hose is required to reach around the machine. Drive Sturdy chain drive Steel drive wheels Solid cast iron bearing block Planing unit Solid kickback guards prevent workpieces from kicking back 3-blade TERSA shaft ensures an optimum planing pattern The material infeed Helical-toothed steel feed rollers for constant and even material feed without marks Several teeth engage simultaneously for powerful feed Wear-free in contrast to rubber feed rollers Technical data Jointer total table length 1510 mm Jointer working width 300 mm Jointer chip removal max. 4 mm Thicknessing dimensions thicknessing table 565 x 300 mm Thick working height min. 3 mm Thick working height max. 230 mm Thicknessing feed speeds 7 m/min Planer shaft speed 5200 min-1 Planer shaft diameter 72 mm Number of planing knives 3 pcs. Electrical connection 400 V Motor power 4.0 kW Suction nozzle diameter 2 x 120 mm Weight 270 kg Optional slot drilling device Table size 470 x 220 mm Optional slotted hole drilling device transverse/longitudinal stroke 160 mm / 110 mm Optional slot drilling device vertical stroke 120 mm Scope of delivery & equipment TERSA planer cutterblock Anodized aluminium planing fence

Condition: used, Year of construction: 2022, front tire size: 800/65 R32, rear tire size: 540/65 R24,

Condition: good (used), Year of construction: 1995, Engine: JGC312 with 551 kW (year 1995) - Turbocharger overhauled 4,000 hours ago - Additional oil cooler – 3 years old - Cylinder head – new in 2017 - Charge air cooler overhauled 4,000 hours ago - Exhaust manifold – new in 2021 Dedpovcm Nfsfx Ap Ioku - Complete engine overhaul in 2017 Offer is made without guarantee of availability.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 32,524 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, fuel type: gas, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR PLANT – JENBACHER J616 GS J11 (Complete Package) This offer is for a complete power plant package, comprising cooling system, pumps, lubrication system, electrical system, and exhaust system. Total operating hours (since new): 32,524 h Maintenance: Fully serviced by INNIO Operating hours since 30,000 h major overhaul: 2,524 h Major overhauls performed (20,000 h and 30,000 h): fully completed. At the 30,000 h major service, the following components were replaced with new parts: turbochargers, pistons, connecting rods, cylinder liners, piston rings, as well as main bearings and connecting rod bearings. Technical specifications: Electrical output: 2,745 kW Year of manufacture (YOM): 2016 Fuel: Natural gas Speed: 1,500 rpm Frequency: 50 Hz Alternator: Leroy-Somer Voltage: 6,300 V Scope of supply (included): Dkedpfx Apeytg Rbs Isu - Jenbacher genset - Auxiliary control cabinets - DIA.NE XT4 - Gas ramp - Cooling system (high- and low-temperature pumps) - Thermal fluid recovery boiler - Silencer - Protection switchgear - Transformer 6.3 kV / 15 kV, 3,500 kVA (included) - Documentation Availability: Immediately

Condition: new, Year of construction: 2025, Our C300 5-job combines feature a sturdy folded and electro-welded steel plate frame. Significantly thick cast iron platens are carefully ground and milled, and all material used is certified to ensure the highest quality. They mount three self-braking motors, each individually protected, with the ability to adjust power from 3 hp to 4 hp according to the required specifications. The carriage, made of milled and anodized aluminum with significant thickness, can vary in length depending on the model or specific requirements. It runs on steel balls on a track also made of steel and is adjustable for optimum smoothness. Standard equipment includes a 1600 mm carriage, while optional 2200 mm carriages are available. The C300 is an ideal choice for the hobbyist and is indispensable for the restorer. Built to above-average standards in its class, it maintains a price-performance ratio that makes it truly competitive in the marketplace. The machine is fully compliant with the latest CE regulations, ensuring high safety standards. TECHNICAL DATA: Work surface mm 300×1500 Knife-holder shaft diameter mm 70 Shaft rotation speed g/m 5700 Number of knives no. 3 Knives dimensions mm 300x25x3 Max platen registration mm 4 THICKNESS PLANER Work surface mm 300×660 Max pass thickness mm 5.5 Feed speed m/min 7 Max wood passage mm 220 Wood passage min mm 4 Shaft rotation rpm 5700 CIRCULAR SAW Worktable mm 220×1000 Rotational speed g/mm 4500 Blade Ǿ 250 Blade hole Ǿ 30 Max cutting height 90° mm 80 Max cutting height 45° mm 50 Tilting blade 0° 45° Max pass between blade and guide mm 560/700 Engraver Ǿ 90 Scoring hole Ǿ 22 Rotational speed rpm 7000 CAVING MACHINE Work table mm 500×250 Longitudinal stroke mm 205 Transverse stroke mm 95 Vertical stroke mm 90 Spindle Ǿ 16 Spindle rotation rpm 5700 VERTICAL MILLING MACHINE Worktable mm 220×1000 Rotation speed rpm 2000/3100/4400/ 7000 Standard spindle diameter mm 30/35/50 Djdpfxouzxh Io Ap Ioku Shaft length mm 105 Vertical shaft stroke mm 115 Max tool diameter mm 160 Max tenon depth mm 55 STANDARD EQUIPMENT Counter frame, flag support mm 800×600 Three-phase motor power KW/HP 2.2/3.0 Weight kg 560 ACCESSORIES ON REQUEST Single-phase motor KW/HP 4.0/3.0 Sliding carriage mm 2200×315 LIST PRICE EXCLUDING VAT

Condition: new, 6 St. range L-W-H 720 x 580 x 800 mm weight 100 kg 100Kg je Lade Stable tool cabinet with 6 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. Dedevblibopfx Ap Isku 12x dividers long 32x short dividers 1x stacking tray

Condition: new, 8 St. range L-W-H 720 x 580 x 1000 mm weight 128 kg 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long Dsdpfeu Impmjx Ap Ijku 32x short dividers 1x stacking tray

Condition: new, 9 St. range L-W-H 1,36 x 0,46 x 0,95 mm weight 115 kg Dksdpou Imqkofx Ap Ieu Drawer cabinet Dimensions of drawer 1 124.5 x 40 x 10 cm (W x D x H) Dimensions of drawers 2 to 5 56.5 x 40 x 6 cm (W x D x H) Dimensions of drawer 6 56.5 x 40 x 14 cm (W x D x H) Dimensions of drawers 7 and 8 31 x 37 x 53 cm (W x D x H) Thickness of worktop 4 cm External dimensions of stacking boxes 10.5 x 13.5 x 7.5 cm (W x D x H) External dimensions of waste bin 25.5 x 32 x 38 cm (W x D x H)

Condition: used, 10 St. ca. 90 kg ca. 1020 x550 x1185 mm Dodpfx Apez A H H Ro Ijku

Condition: used, 12 St. ca. 90 kg ca. 710x720x1000 mm drawer measurements 600 x 600 mm Colour 7035/5012 RAL Cabinet including assortment of dividers Large drawer usable space Full extension drawers (VA) 100% 8 drawers with internal height 40 mm 2 drawers with internal height 70 mm, 2 drawers with internal height 95 mm, 7 drawers with tray dividers and boxes 3 drawers with rail dividers 2 drawers with foam inserts Ball bearing drawer runners Individual pull-out stop Individual locking possible for each drawer Dedpfjylcp Rox Ap Isku Cabinet without key! Translated with (free version)