Used Combined Drawing for sale (5,362)

Condition: used, Collet set, chuck collet holder for draw-in collets WEILER Collet chuck, collet holder, collet device Suitable for WEILER Praktikant lathe, year of manufacture 1984 Draw-in collet type: FM 613 / 386E DIN 6341 Collet diameter: 32 mm Collet length: approx. 115 mm Collet thread: TR 32 x 1.5 mm - Collet holder sleeve with MK 5 external taper (Ø 44 mm) Rsdpey Ra Dqsfx Aarjw - Draw tube with internal thread M 32 x 1.5 mm, handwheel for manual tightening of the collet - 15 pieces FAHRION collets: Ø 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 mm - fits WEILER Praktikant and should also fit WEILER Matador Total weight: 10.5 kg Very good condition

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: KD 67 C, total width: 65 mm, total length: 160 mm, type of input current: three-phase, input voltage: 400 V, Brandt Optimat KD 67 C Automatic Edgebander Manufacturer: Brandt Maschinenbau GmbH, Germany Model: Optimat KD 67 C Year: 2000 Power Supply: 400V, 3 Phase, 50Hz Condition: Fully operational and currently in working order. Technical Specifications - Automatic single-sided edgebander - Edge thickness: 0.4–5 mm (up to 8 mm depending on material) - Panel thickness: 8–40 mm - Minimum panel width: 65 mm - Minimum panel length: 160 mm - Feed speed: 9–11 m/min - Machine length: Approx. 5.2 m - Weight: Approx. 1,950 kg - Total connected load: Approx. 6.2–7.0 kW Features - Coil edge magazine - Hot-melt glue application unit - Pressure roller section - Double motor end trimming - Top & bottom flush/radius trimming - Two-motor corner rounding unit Redpfozhd Ifjx Aarsw - Profile scraper unit - Buffing unit - Fully enclosed safety guarding - German manufactured industrial machine Machine has been used in a professional cabinetmaking/joinery workshop and is in full working condition.

Condition: good (used), Year of construction: 1999, Lg 33922 Unwinding and guiding unit SOPREM BRH 7-200-80U-1250 BAP Web width: max. 200 mm Coil weight: max. 1,250 kg Spreading range: approx. 380 to 430 mm Coil outer diameter: max. 1,300 mm Web thickness: approx. 0.8 to 3 mm Rodshuwacspfx Aarew Working direction: from right to left

Condition: new, Year of construction: 2024, For sale is a new Felder panel saw K540S with a cutting height of up to 140 mm. The machine is an exhibition unit in our showroom and is therefore as new (full warranty). Technical data: - Cutting height: 140 mm - Saw blade diameter: 300–400 mm - Motor: 5.5 kW / 7.5 HP - X-Roll sliding table, cutting length: 2800 mm - Rip fence cutting width: 800 mm - Outrigger table: 1300 mm - Crosscut fence on outrigger: 2600 mm - 'Easy-Glide' tilt segment guide - CE-compliant overhead guard - 3x 400 V / 50 Hz The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: panel saw, sliding table saw, circular saw, table saw, woodworking machine, Felder Reference: R-A0117 Rsdsy R N Apopfx Aarow

Condition: good (used), Year of construction: 1995, functionality: fully functional, SCM Combination Planer/Thicknesser 2252 Year of manufacture: 1995 Manufacturer: SCM (Italy) S/N AB 44714 good condition, from a training facility Planing & thickness width 500–520 mm Planing table length     ~2000–2200 mm Cutterhead Ø 120 mm, 4 knives (HSS/TERSA) Motor power     5.5 kW (400 V) Thicknessing height   3 – ~235 mm Feed speed 5 – 17 m/min Table adjustment  manual (planing), electric with display (thicknessing) Extraction connection   Ø 120 mm The SCM 2252 is a robust combination machine ideal for craft applications. Cast iron tables, HSS cutterhead, stepless feed, motor-driven thicknessing table adjustment with display and mortising attachment make it a versatile work tool. Easy table adjustment for changing to thickness planing (spring assist) Planer part (planing function) Working width: approx. 500–520 mm Rodewrcd Nopfx Aarsw Table length: about 2000–2200 mm Cutterhead: d = approx. 120 mm with 4 HSS knives Power: 5.5 kW (~7.5 HP) motor, 400 V Start: conventional "YA" start with motor brake Alignment & guidance: tiltable parallel fence (0° to 45°), mostly aluminum, length approx. 1100 × 170 mm Protection: Extraction hood (Ø approx. 120 mm) and CPS operator protection Tables: Cast iron tables, height adjustable manually Thickness planer part Working width: same range – 500–520 mm Height range: min. 3 mm to max. approx. 235–252 mm Table dimensions: approx. 500 × 930 mm to 550 × 320 mm implemented Table adjustment: electric, with display (e.g., SIKO, digital height display) Feed speeds: continuously adjustable between ~ 5 and 17 m/min or in steps like 7.5 / 15 m/min Extraction: usually also Ø 120 mm, often combined extraction option Machine features & dimensions Dimensions (L×W×H): around 2200 × 1000–1500 × 800–1000 mm Working height: approx. 800 mm Weight: 1050 kg

Condition: new, pressing force: 200 t, DURENDUS 200 T Deep Drawing Press – Double Column Press – 900 × 900 mm Table, 80 T Drawing Cushion The machine shown here was already built and delivered to a customer's order. We can manufacture a new machine of this model for you at short notice – including individual options tailored to your requirements. This is a hydraulic deep drawing press with integrated drawing cushion function designed for forming processes, drawing operations, and precise sheet metal processing. Base price: €76,000 net Options (upon request): The options listed are based on completed customer projects and allow targeted adaptation of the machine to your specific application. The basic version offers a functional standard configuration – in practice, it is usually enhanced with additional features and specifically configured to project requirements. * T-slots and holes to customer specification * Adaptation of stroke, installation height, and press force range * Extended drawing cushion configuration * Customized control modifications Redpfeyzf A Hex Aarow * Enhanced safety and monitoring systems ==== Technical Data + Information: ==== General Information * Design: Double column press * Press force: 40–200 t (adjustable) * Total weight: approx. 5,500 kg * Overall dimensions (W × D × H): 2,370 × 1,300 × 3,300 mm ==== Working Area * Table size: 900 × 900 mm * Ram area: 900 × 900 mm * Installation height: max. 800 mm ==== Table & Ram * Table height: 1,000 mm * Ram stroke: 0–500 mm (adjustable) * Column guide: 4 columns Ø 120 mm ==== Speeds * Pressing speed: 4–10 mm/s * Idle speed: 10 mm/s * Return speed: 16 mm/s * Drawing cushion speed: 20 mm/s ==== Hydraulics & Drive * Operating pressure: max. 260 bar * Pump capacity: 70 l/min * Servo motor power: 15 kW * Pressure accuracy: ±5 bar * Hydraulic system with air cooling and oil monitoring ==== Control & Operation * Two-hand operation * Mode selector switch (key switch) * Modes: setup, manual cycle * Electrical connection: 400 V / 50 Hz * Total connected load: approx. 20 kW ==== Equipment * Drawing cushion: 30–80 t, stroke 200 mm * CE-compliant design * Safety limit switches * Hydraulic interlock * Control cabinet IP54 with brand components (SIEMENS, ALLEN BRADLEY, SICK) * Two-layer coating according to RAL colors ===== Deep drawing, sheet metal forming, forming technology, manufacture of drawn parts, series production, metalworking Deep drawing press, hydraulic press, double column press, drawing cushion press, forming press, sheet metal processing press Are you looking for a hydraulic press tailored to your application? Contact us for an individualized quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations.

Condition: like new (used), Year of construction: 2019, pressing force: 400 t, pressure:400 t stroke:900 mm Table dimensions:1200 x 1200 mm Deep-Drawing Pillow:150 t travel away deep-drawing pillow:280 mm Rjdpfxefh Izms Aarsw Daylight Opening:1100 mm

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 550 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :550 mm Ram plate:700 x 600 mm table height over floor:900 mm Table size:700 x 600 mm speed of forward flow:50 mm/sec Pressing speed:10 mm/sec :50 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,3 t dimensions:1150 x 2600 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück Heating panels (L x B) with 2 measuring sensors diagonally:550 x 500 mm Siemens Control System:S7 1200 Monitor:12 Zoll :2400 ? :1200 ? :1200 ? Rsdpofxygpsfx Aarjw

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: DF0052, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l Rsdpfxjfxyire Aarsw pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

Condition: used, functionality: fully functional, power: 22.9 kW (31.14 HP), fuel type: diesel, color: orange, operation weight: 2,190 kg, Year of construction: 2016, operating hours: 6,100 h, Equipment: cabin, Hamm HD10 VT combination roller with cabin Year of manufacture: 2016 Redjzap Ivjpfx Aarjw 6,100 operating hours 22.9 kW Kubota engine 2,190 - 3,110 kg Edge-cutting wheel

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 700 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ? Rsdpfofxyh Rox Aarew

Condition: like new (used), Year of construction: 2021, cutting width (max.): 2,500 mm, cutting length (max.): 9,000 mm, Equipment: documentation/manual, PLASMA TUBE AND SHEET METAL COMBINATION WORKING RANGE SHEET METAL MM 2500 X 9000 TUBE DIAMETER FROM MM 80 TO MM 550, TUBE LENGTH MM 9000 Rsdpfx Ajv E Sabearjw YEAR OF CONSTRUCTION 2021 HYPERTHERM BRAND PLASMA GENERATOR MODEL XPR 170

Condition: used, Year of construction: 1974, Combination Kieselguhr and Sheet filter. Stationary sheet filter with square filter elements in vertical row arrangement. Capacity: 60 hl/h No. of plates - KG Filter: 34 Plates No. of frames - KG Filter: 35 filter frames No. of plates - sheet filter: 150 Plates Length: 6500 mm Width: 1000 mm Height: 1500 mm Formats: Quadratic filter elements - 60 cm x 60 cm Base construction: Frame Rodpfsxbpdlsx Aarow Features: Manual filter element compression Periphery: Kieselguhr dosing unit with dosing pump Layer patterns: Vertical filter elements in a row

Condition: good (used), For sale is a used MiniMax 5-function combination machine with a cutting length of 1500 mm. The machine is in good condition and has been serviced and inspected by our qualified technicians. Technical specifications: - Cutting length: 1500 mm Rodpfsy Nxk Hex Aarow - Cutting width: 700 mm - Cutting height: 103 mm - 2 spindle speeds - 3-knife planer cutterblock - Planing width: 300 mm - Jointing length: 1400 mm - 3 motors, each 2.2 kW / 3 HP The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thickness planer, thicknessing machine, circular saw Reference: R-E297B

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, total length: 2,400 mm, total width: 900 mm, total height: 1,400 mm, input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, Sausage portioning, joining and separating device VEMAG brand Model FSL 210 Year of production 2011 Power 6.2kW Voltage 400-460V 9A 3~50/60Hz Dimensions 2400x900x1400mm Portioning speed: 800 por./min Depending on housing, caliber and weight Portion length: From 55 mm - no limits, single cut From 40 mm - no limits, for 2 or more sausages Caliber: 13 - 40+ Types of casings: Natural, collagen and cellulose casings Casing length: up to 350 mm (collagen casing) FSL210 is a machine offering flexible and accurate portioning by length, joining and separating sausages in casings natural, collagen and cellulose casings. Rsdpfx Aasvztrdjrow

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,700 kg, fuel type: diesel, color: original, power: 18.39 kW (25.00 HP), motor manufacturer: Perkins, maximum load weight: 1,000 kg, gearing type: automatic, axle configuration: 4x4, suspension: other, tire condition: 100 %, number of seats: 1, brakes: other, lifting power: 1,000 kg/m, shovel volume: 1 m³, digging bucket width: 360 mm, emission class: euro5, Equipment: additional headlights, adjustable chassis, all wheel drive, cabin, crane, cruise control, gripper hydraulics, hammer hydraulics, hydraulics, low noise, onboard computer, pallet forks, rear pickup, standard shovel, NEW, PERKINS COMBINATION EXCAVATOR – BRAND NEW!! BRAND NEW!! NEW!! NEW!! NET PRICE: €13,200 FOR BUYERS WITHIN THE EUROPEAN UNION!! Rsdpfxjw Tkmye Aarsw THE MACHINES ARE LOCATED IN MAJSKE POLJANE, GLINA!! PRICE: €13,200 NET + VAT IN CROATIA. OUTSIDE OF CROATIA, VAT IS NOT APPLICABLE!! WEIGHT: 2,700 KG WIDTH: 1.65 m LENGTH: 5.00 m HEIGHT: 2.40 m WORKING REACH OF THE REAR HYDRAULIC DIGGING ARM: 3.50 m, DIGGING BUCKET: 33 CM. VARIOUS DIMENSIONS OF BUCKETS, HAMMERS, ETC. CAN BE PURCHASED. FRONT LOADING BASKET WITH QUICK COUPLING. 0.800 m² PALLET FORKS, QUICK COUPLING!! I ONLY RESPOND TO SERIOUS INQUIRIES: PLEASE ONLY SERIOUS CALLERS. EXCHANGES, PAYMENT PLANS, ETC. WILL NOT BE ACCEPTED. YOU CAN OBTAIN AN OFFER FOR A BANK LOAN OR LEASING. OFFER FOR KUBOTA: approx. €13,200, 3% INTEREST, AND YANMAR: approx. €19,500, 3.7% INTEREST.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: CHA2500, Shipping costs are the responsibility of the buyer. Rsdpfjy U D Ihox Aarsw

Condition: excellent (used), Toolmax K310 multi-functional machine: saw, planer, router – 5-in-1 Planer: width 31 cm, max height 195 mm, 3 knives, 1 feed speed, Jointer: width 31 cm, table length 155 cm, 3 knives, adjustable fence, Router: spindle diameter 30 mm, 2 speeds, 150 cm sliding table, adjustable fence, Saw: adjustable up-down and 0-45 degrees, Redpfx Aaoy Udvxerew 150 cm sliding table, guide rail on the side table, max blade diameter 250 mm Horizontal drilling machine: table adjustable up-down, front-back, and left-right, the machine has 3 motors, each 3 kW + a motor for the planer feed, power supply 380 V, used machine in very good condition, ready to work.

Condition: good (used), Year of construction: 2001, cutting height (max.): 240 mm, cutting width (max.): 410 mm, Surface planer and thicknesser GRIGGIO FS 410 Year of manufacture: 2001 Planing width: 410 mm Thicknessing height: 9-240 mm Spindle speed: 5000 rpm Rjdpfx Aasy S E Ukjrow Footprint: 2100 x 1500 mm Immediately available

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t Rodpfx Aetndu Uoarew LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: used, Year of construction: 1992, HYDRAP type HPSKZ 63t / 20t Pressure: 63t Down table dimensions: 700x700 mm Up table dimensions: 600x600 mm Stroke length: 600 mm Daylight: 800 mm Cushion: 20t Rjdpfx Aew Slnioarew

Year of construction: 2026, condition: new, functionality: fully functional, Combined 3 in 1 : Welder / Generator / Compressor Triplex is multifunctional mobile power unit designed to provide 3 essential functions in a single compact machine : electrical power generator, welding capability and compressed air supply. Rodszaaknepfx Aarjw

Condition: excellent (used), Year of construction: 2020, operating hours: 5,065 h, functionality: fully functional, power: 901 kW (1,225.02 HP), total height: 2,990 mm, total length: 12,000 mm, total width: 2,990 mm, fuel: domestic gas H, Equipment: documentation/manual, For sale is a natural gas combined heat and power (CHP) plant in containerized design and a chimney with 3 flues: Short description: CONTAINER CHP 901 kWe / 928 kWth Natural gas engine: Jenbacher J 412 GS-B06 Generator: 400V / 50 Hz / STAMFORD PE 734C Rsdpfsvuz Utex Aarow Further information: - Complete CHP package in a container (12x3x3 m), super silent, color RAL7004, including mixture cooling and emergency cooling as a table cooler, outdoor glycol protection system, oxidation catalyst (Oxikat), provision for SCR system, island operation capability, Profibus DP interface, etc. - Supplied as per technical drawings, documents, P&ID diagrams, and data sheets. - Genset has completed 5,056 operating hours (operating period: 01/2021 - 12/2021). - The entire CHP plant is in excellent condition, the genset was regularly serviced under a premium service contract, and is currently under the manufacturer’s care.

Condition: used, Year of construction: 2005, overall weight: 1,250 kg, power: 9.5 kW (12.92 HP), input voltage: 380 V, input frequency: 50 Hz, total length: 4,700 mm, total width: 1,140 mm, total height: 1,450 mm, We are offering this used VIOLI VM TRI hydraulic pull tester, manufactured in 2005. Model: VM TRI 10 Serial number: 973 Year of manufacture: 2005 Length: 4700 mm Depth: 1140 mm Height: 1450 mm Rated voltage: 380 V Frequency: 50 Hz Power: 9.5 kW Weight: 1250 kg Rodpfx Aasy Sz Aworsw If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Bernardo 320 multi-function machine: saw, planer, router – 5-in-1 Planer: width 32 cm, max height approx. 220 mm, 3 knives, 1 feed speed, Jointer: width 31 cm, table length approx. 140 cm, 3 knives, adjustable fence, Rsdpjy Ti Tmefx Aarow Router: spindle diameter 30 mm, 2 speeds, 3500/7000 rpm, side carriage, adjustable fence, Saw: adjustable up-down and 0-45 degrees, side carriage, guide rail on the side carriage, Horizontal drilling machine: Table adjustable up-down, front-back, and left-right. The machine has 3 motors, each with 4 kW. Power supply: 380V. Used machine in good condition, ready for operation. Robust multi-function machine. Weight: 760 kg.