Used Continuous Shelf for sale (7,026)

Condition: used, This package includes: 20 x crossbeams, 2,700 mm each (yellow) 40 x securing pins - Remaining stock - Manufacturer: Tegometall Condition: used, good condition Crossbeam length: 2,700 mm Hfodpfxozuyrme Afton Crossbeam height: 140 mm Shelf load capacity: 3,000 kg Accessories such as: Floor mounting Connectors Load warning labels Impact protection Guard rails Grating Back panel grating Deep shelf supports Barrier railings and much more... Just ask us! "Benefit from over 20 years of industry experience – we will provide you with competent and personal advice as your experienced specialist retailer for new and used shelving systems." Sales and Delivery Conditions (B2B) - Prices & Logistics: All prices are quoted net ex works. Express delivery via our own fleet is possible after individual consultation. - Offer Status: All offers are subject to change and non-binding. We reserve the right to sell items in the meantime. - Reservation of Title: The goods remain our unrestricted property until full payment (no right of disposal or processing). - Warranty: Exclusive sale to commercial businesses (§ 14 BGB). For used and IIa goods, there is an exclusion of liability for material defects. For new goods, the respective manufacturer's warranties apply.

Condition: used, This package includes: 38 x crossbars, 2,700 mm each (yellow) 76 x locking pins - Remaining stock - Manufacturer: Tegometall Condition: used, good condition Crossbar length: 2,700 mm Crossbar height: 130 mm Shelf load capacity: 2,700 kg Accessories such as: Floor mounting Connectors Load warning signs Impact protection Guard rails Grating Rear panel grating Deep shelf supports Barrier rails Hedpfxezuyrtj Aftjfn and much more... Just ask us! "Benefit from over 20 years of industry experience – we provide competent and personalized advice as your experienced specialist retailer for new and used shelving systems." Sales & Delivery Terms (B2B) - Prices & Logistics: All prices are quoted net ex works. Express delivery via our own fleet is possible after individual consultation. - Offer status: All offers are subject to change. Items may be sold subject to prior sale. - Retention of title: Ownership of the goods remains with us until full payment has been received (no right of disposal or processing). - Warranty: Exclusive sale to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for defects in materials and workmanship is excluded. For new goods, the respective manufacturer's warranties apply.

Condition: good (used), For sale are sturdy crossbeams for pallet/heavy-duty shelving in good, used condition. Hjdpfxjzzy Axs Aftsfn These crossbeams are ideal for expanding or supplementing existing shelving systems. Technical data: * Length: approx. 1,800 mm * Profile: approx. 100 x 50 mm * Color: Yellow * Condition: used, good condition * Larger quantities available The crossbeams are already bundled and can be provided according to the desired quantity. Price: €23 net plus VAT per piece. Special prices are possible for larger quantities. Inspection and collection are possible by arrangement. Nationwide delivery can be organized. If interested, please indicate the required quantity. Other pallet racking, frames, crossbeams, and storage technology are in stock. Shelving systems | Sales • Installation • Dismantling • Repair | MM Lagertechnik We will gladly prepare a non-binding offer for you – tailored to your individual needs.

Condition: excellent (used), Continuous Sterilizer / Cooker-Cooler FMC-JBT STERILMATIC – 1 kg Format Continuous sterilizer FMC-JBT STERILMATIC (Cooker-Cooler), designed for the continuous thermal treatment of packaged food products, automating the sterilization and cooling stages within a high-production industrial line. This type of system is especially designed for canning plants that need to replace batch processing with a continuous flow of packages, allowing for the constant input of product, its thermal treatment for a controlled time, and subsequent cooling before continuing to the next stages of the line. Equipment configured for an approximate 1 kg format. MAIN FEATURES -Manufacturer: FMC / JBT -Series: STERILMATIC -Type: Continuous sterilizer / Cooker-Cooler -Installed format: 1 kg -Continuous thermal treatment of packages -Automatic sterilization and cooling process -Continuous product transport -Control of dwell time during the process -Industrial thermal circulation system -Integrated treatment sections -Piping, valve, and process distribution system -Integrated fans / circulation systems -Robust industrial construction -Designed for continuous operation -Especially suitable for high-capacity canning lines PROCESS The FMC-JBT STERILMATIC is designed to perform the thermal treatment of packages as they continuously move through the equipment. The previously filled and sealed packages are automatically introduced into the system, where they remain for a controlled process time and are subjected to the established thermal conditions to achieve the required treatment. Subsequently, the packages move to the cooling stage, progressively reducing their temperature before being discharged and transferred to the next production operations. The continuous system avoids the repetitive loading and unloading operations typical of conventional batch autoclaves and is particularly interesting for lines with large production volumes. Hodpezxcb Esfx Aftefn APPLICATIONS Especially suitable for canning industries and manufacturers of high-production canned foods that require a continuous thermal process. It can be integrated into production lines for vegetables, legumes, tomato products, fish, meat, pet food, ready meals, and other packaged foods, always in accordance with the configured format and thermal process. The combination of FMC-JBT STERILMATIC technology, continuous sterilization, and Cooker-Cooler system provides an industrial solution for large-capacity canning lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2013, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on site for loading. Hedpfx Aezy Uk Ueftofn For sale is a parts washing system with continuous operation, manufactured by Eko-Pil, model: PMPO 100T.

Condition: new, functionality: fully functional, machine/vehicle number: RR16HHE3L, Year of construction: 2026, load capacity: 1,600 kg, lifting height: 5,000 mm, free lift: 1,715 mm, fuel type: electric, mast type: triplex, construction height: 2,185 mm, power: 1.2 kW (1.63 HP), battery capacity: 205 Ah, battery voltage: 24 V, fork length: 1,150 mm, fork width: 170 mm, fork thickness: 65 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 1,165 kg, total length: 1,975 mm, total width: 836 mm, SCHORR HIGH-LIFT TRUCK, ELECTRIC, PRO 1600KG LOAD CAPACITY, 5M LIFT HEIGHT, RR16HH500E3L, FULL FREE LIFT - 1,600 kg load capacity, designed for demanding warehouse operations - Triplex mast with full free lift: lift even with a compact 2,185mm overall height - Proportional lift and lowering control: precise positioning to the millimeter - 24 V / 205 Ah lithium battery, easy to recharge - Low-maintenance AC drive, multi-function display, up to 16% incline - Turning radius 1,506 mm, only 836 mm wide: maneuverable in narrow aisles A powerhouse for your warehouse Heavy pallets, high shelves, tight schedules: The RR16HHE3L, with a 1,600 kg load capacity, is designed for demanding warehouse operations and reaches a lift height of 5.0 meters. Receiving, block storage, racking: You can handle the tasks of your warehouse with a single device, instead of switching between several machines. The substance behind it: solid chassis, stable triplex mast, polyurethane tires for continuous operation, and an electromagnetic operating brake that keeps the equipment and load safely in position in any situation. This ensures that the RR16HHE3L remains what your warehouse needs, even in multi-shift operation: a reliable device. Full free lift: full height, even under low ceilings Low doorways, narrow aisles, high shelves: this is exactly what the full free lift is for. The forks lift first within the mast profile without the mast extending even a centimeter upwards. With an overall height of only 2,185 mm, the RR16HHE3L passes through doorways and intermediate floors where extending masts would have long since collided and stacks to full height as soon as there is space upwards. The same applies throughout the warehouse: 836 mm overall width, a turning radius of 1,506 mm, and a working aisle width of 2,356 mm (pallet 800x1200 lengthwise). You can maneuver safely where space is tight: between rows of shelving, in the block storage area, or on the ramp. Millimeter precision, all day long The proportional lift and lowering control executes every movement exactly as you specify on the ergonomic tiller: quick lifting, sensitive and millimeter-precise lowering in the upper shelf level. This prevents pallets from being bumped and goods from being damaged, even with operators who have little experience. The low-maintenance AC drive operates energy-efficiently and handles inclines of up to 16%, and the multi-function display shows battery level and speed at a glance. The 24 V / 205 Ah lithium battery can be easily recharged at any time without a memory effect; the 24 V charger is included. And behind it stands the manufacturer itself: spare parts warehouse, its own workshop, personal advice. Technical data - Manufacturer (abbreviation): SCHORR - Manufacturer's type designation: RR16HH500E3L - Load capacity: 1.6t - Model: 500E3L - Weight including batteries: 1165kg - Drive: Electric Hedpfszktyisx Aftefn - Tires: Polyurethane - Overall length: 1975mm - Overall width: 836mm - Lift: 5000mm - Free lift: 1715mm - Lift mast height lowered: 2185mm - Lift mast height raised: 5445mm - Fork dimensions: 65mm x 170mm x 1150mm - Fork outside distance: 570mm - Working aisle width with pallet: 800x1200 lengthwise 2356mm - Turning radius: 1506mm - Travel speed with/without load: 5.0km/h / 5.5km/h - Lift speed with/without load: 0.13m/s / 0.16m/s - Lowering speed with/without load: 0.22m/s / 0.13m/s - Max. climbing capacity with/without load: 8% / 16%

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, REX RVF 327 | Vacuum filler with Busch pump Manufacturer: REX Technologie Ges.m.b.H. & Co. KG Model/Type: RVF 327 (RVF 327 F/P/A) Serial number: 2377091111 Year of manufacture: 2011 Power supply: 400 V / 50 Hz Current protection: 3x 16 A Rated power: 5 kW Dimensions: 1150 x 800 x 1200 mm Vacuum pump specifications: Pump manufacturer: Busch Model: KC 0016 E 320 Pump serial number: 1100558454 Pump year of manufacture: 2011 Vacuum capacity: 16 m³/h REX Technologie RVF 327 is a professional, extremely compact, and efficient rotary vacuum filler. This 2011 unit is the heart of a portioning line in small, medium, and large meat, fish, convenience food processing plants, as well as in the cheese and bakery industries. The machine is used for continuous, highly precise portioning, filling, and twisting of various types of fillings and masses. The use of an integrated, reliable German vacuum pump from Busch with a capacity of 16 m³/h allows for effective degassing of the filling before the filling process. As a result, the final product has a compact structure, and there are no air bubbles in the cross-section (which significantly increases the shelf life of the products), as well as perfect, consistent meat coloring. Key features and benefits: - Paddle-type filling transport system: The gentle, rotating mechanism ensures that the filling's structure is not crushed or smeared, which is crucial in the production of coarsely ground sausages, cabanossi, or burgers. Hedpfx Aey Uciksftjfn - High-quality vacuum (Busch): The dedicated Busch KC pump ensures the optimal vacuum level in the loading chamber, providing stable operation even with thick and demanding masses. - Versatility and flexibility: The RVF 327 model works perfectly with peripheral devices such as twisting mechanisms, casing holders, automatic clippers, or hanging systems. - Intuitive control: The machine is controlled by a microprocessor panel, which allows for precise programming of portion weight, pauses, twisting time, and correction of the first portion.

Condition: good (used), Cable rack for large cable reels Consisting of 7 uprights Depth: 0.81 m Bays: 0.75 + 0.75 + 0.855 + 0.855 + 0.945 + 1.05 + 1.05 m width – upright width: 8 x 0.10 m Height: 5.06 m Hedsy I U Tbjpfx Aftjfn

Condition: used, Year of construction: 1996, machine/vehicle number: VKD5000G, power: 180 kW (244.73 HP), temperature: 1,120 °C, inner dimension length: 5,000 mm, inner dimension width: 550 mm, inner dimension height: 130 mm, number of chambers: 3, year of last overhaul: 2025, We offer a used WMU VKD5000G protective gas conveyor furnace (continuous belt furnace), year of manufacture 1996. The system is ideally suited for soldering and annealing stainless steel components. Technical data: Hsdpfx Aoy Nyqzoftefn Heated length: 5000 mm Number of heating zones: 3 Operating temperature: up to 1120 °C Usable width: 550 mm Usable height: 130 mm Heating power: 180 kW Protective gas: Hydrogen / Nitrogen The furnace was relined in 2025 and is equipped with an almost as-new furnace muffle. If you have any questions or require further information, please do not hesitate to contact us by phone or email at any time.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, MULTIVAC T300 | Automatic Tray Sealer Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG Model/Type: T300 Serial number: 226445 Year of manufacture: 2016 Power supply: 400/230 V, 50 Hz, 3/N/PE AC, 21.5 A, 5.5 kW Overall dimensions: 4050 x 1150 x 1700 mm Tooling dimensions: (2x) 190 x 130 mm (double-cavity tooling) Maximum fuse rating: 50 A Maximum short-circuit current: 5 kA Hodpfx Aozutilsftofn Vacuum pump: Busch MRP150 (Serial number: 1530249) Vacuum pump capacity: 106/127 m3/h The MULTIVAC T300 is a highly advanced, fully automatic tray sealer designed for professional and hermetic packaging of food products. With its robust construction and precise sealing mechanism, this machine is a key piece of equipment in medium-sized and large meat processing plants, slaughterhouses, delicatessen plants, and industrial catering kitchens. The use of vacuum technology allows for the safe packaging of meat, ready meals, and dairy products, which significantly extends their shelf life and improves their presentation on store shelves. The model presented, manufactured in 2016, is integrated with an extremely efficient and reliable vacuum pump from the renowned German brand Busch (model MRP150) with a capacity of up to 127 m3/h. This configuration guarantees fast and stable air evacuation in every phase of the production cycle. The installed double-cavity tooling, with dimensions of 190 x 130 mm, enables smooth continuous operation while maintaining excellent sealing consistency. The mechanical equipment and pneumatic system of this class are characterized by exceptional durability, which effectively minimizes the risk of unscheduled downtime.

Condition: excellent (used), El. heated salt bath continuous furnace system, make Kohnle consisting of Hodpjy Uuu Esfx Aftjfn Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: new, Year of construction: 2025, Edge grinding machine with an overhead feed mechanism Hjdpfxshqb Rco Aftefn What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table, featuring a rubberized feed belt and an overhead pressure bar. This significantly simplifies the grinding and production of bevelled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it provides assistance when processing exceptionally large or small parts. The feed speed can be continuously adjusted between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the upper pressure bar gently convey the material. An optional second, lower conveyor belt is also available. The upper pressure rollers can also be replaced with a rubber band, which is particularly helpful when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all types of processing – from solid wood to fine veneer edges – with high quality. The continuously adjustable feed speed allows for optimal adaptation to the material. 1. Grinding station: “Veneer side” 2. Grinding station: “Solid wood side” 3. Grinding station: “Additional table” 4. Grinding station: “Half-round table” Location: Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, For sawing, milling, planing/thicknessing, and optionally mortising in a confined space. High-precision format sliding table made of anodized aluminum, available in various lengths. Large outrigger (1200 x 650 mm) with a material support roller and extendable aluminum telescope fence up to a maximum of 3200 mm with professional fence flaps. Max. saw blade diameter 315 mm, swiveling from 90° to -45°. Large swivel range of the milling spindle from 90° to -45° to the rear. Four milling speeds up to 10,000 min⁻¹, manually adjustable. With clockwise/counterclockwise rotation of the milling spindle. Heavily ribbed planing tables made of stress-free gray cast iron for decades of stability and flatness. 2-stage feed rate for thicknessing. Three independent industrial motors for continuous operation. With lockable main switch, motor protection switch. Fixed handwheels. Dimensions and Weights Weight (net) approx. 857 kg Planing Planing table width 410 mm Planing table length 2000 mm Maximum planing material removal 5 mm Dust extraction connection Dust extraction port diameter 3 x 120 mm Dust extraction port diameter saw blade guard 60 mm Installation Information Space requirement length 5960 mm Space requirement width/depth 5140 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Working area length 1600 mm Working area width/depth 1600 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknessing Hfedoih Dxljpfx Aftsn Thicknessing table length 757 mm Thicknessing table width 423 mm Minimum working height (thicknessing) 3 mm Maximum working height (thicknessing) 230 mm Maximum material removal (thicknessing) 5 mm Electrical data Connection voltage 400V Mains frequency 50Hz Rated operating mode drive motor S6 Duty cycle drive motor 40% Power drive motor 3 x 5.0 kW Sliding table and table Format sliding table length 2660 mm Format sliding table width 360 mm Format sliding table height 142 mm Table length 1250 mm Table width 430 mm Table height 900 mm Milling spindle Spindle inclination 0 – -45° Spindle arbor diameter 30 mm Usable length of the spindle 125 mm Spindle speed(s) 3500/6000/8000/10000 min⁻¹ Maximum milling tool diameter Maximum tool diameter, adjustable 210 mm Maximum tool diameter, adjustable 45° 150 mm Maximum tool diameter, mortising 275 mm Planing cutterhead Cutterhead type TERSA Cutterhead diameter 87 mm Number of planing knives 4 pcs Cutterhead speed 5200 min⁻¹ Circular saw unit Beside length 2600 mm Cutting width with parallel fence 900 mm Maximum crosscut width to the left of the saw blade 3260 mm Saw blade inclination 90 – 45° Maximum cutting height at 90° 90 mm Maximum cutting height at 45° 63 mm Maximum saw blade protrusion 90° 100 mm Maximum saw blade protrusion 45° 71 mm Diameter (main) saw blade 315 mm Explanation of diameter (main) saw blade: with scoring saw Speed (main) saw blade 4000 min⁻¹ Feed rate Feed rate 6 – 12 m/min Location: In stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Hfjdpfxjiidm Ns Aften Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Year of construction: 2026, condition: new, NEW – - Ideal for removing sheets from your vertical sheet storage system. - For internal transport of sheets to a vertical or horizontal sheet dividing saw. - The continuously adjustable support surface can be precisely adjusted to the height of your sheet saw. - Sheets weighing up to 250 kg can be transported or pivoted by a single operator. Hjded Tyaaspfx Aftjfn Technical data: Support height - vertical: approx. 120 – 340 mm - horizontal: approx. 890 – 1200 mm Maximum sheet size: 5200 × 2100 mm Load capacity: 250 kg Location: In stock at 54634 Bitburg - immediately available - Will be shipped within Germany for €90.00 net.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Hedpfx Afjzt Twyetefn Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: new, Year of construction: 2026, Holzkraft bandsaw HBS 533 S. Heavy-duty professional model with high weight for maximum smooth operation. Particularly quiet and precise operation thanks to a torsion-resistant machine housing. Large, one-piece cast iron saw table, swiveling from 0° to +20° with a ground and polished surface. Patented table tilting mechanism with handwheel and rack and pinion. Saw blade quick-release tensioning system. Ceramic saw blade guide rollers. Large cast iron parallel fence. Fast and precise adjustment of cutting height via handwheel and rack and pinion with millimeter scale. Safety switch for automatic shutdown when the door is opened. Large cast iron parallel fence. Comes standard with a miter gauge. Flywheels made of cast iron with a special coating on the running surfaces. Inspection window for checking the saw blade run. Hedpfsb S Uzkjx Aftefn Professional saw table guide. The heavy, solid cast iron saw table is easily and conveniently adjusted via a handwheel and rack and pinion guide. The tilt is continuously adjustable from 0° to +20°. Patented. Work table dimensions: 750 x 530 mm Cutting speeds: 1400 m/min. Flywheel diameter: 530 mm Max. cutting height: 350 mm Max. cutting width with fence: 465 mm Max. cutting width without fence: 510 mm Bandsaw blade length: 4190 mm Precision guide: top / bottom Saw table tilt: 0° - +45° Motor power 400 V/50 Hz/P2: 4.0 kW Weight: 305 kg Dimensions: 1000 x 720 x 2040 Dust extraction port diameter: 2 x 100 mm Location: In stock, Bitburg.

Condition: as good as new (ex-display), Year of construction: 2026, ST 3 classic F 23 – Combined Saw-Milling Machine Hfodocnwydjpfx Aftjn With pivoting saw blade, pivoting milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel distance 2250 mm) Large extension table (900 x 600 mm) with extendable aluminum telescope fence Max. saw blade diameter 315 mm with scoring device, pivotable from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large, double-bearing milling unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3,500 - 10,000 rpm With clockwise/counterclockwise rotation of the milling spindle Standard arc milling guard Two 5.0 kW motors with high power reserves Cast iron milling unit mounted on both sides at the top precision ball bearings on top close to the pivot point four optimally graduated milling speeds, which enables the sharpening of workpieces Powerful motors Industrial motor, 100% duty cycle for continuous operation (full load) suitable Scope of delivery: Arc milling guard Anodized aluminum format sliding table Aluminum fence jaws Folding stops Technical data Dimensions of cast iron work table 1112 x 430 mm Fence length 2250 mm max. saw blade diameter with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. crosscut width 2660 mm Saw blade pivot 90° - 45° Cutting width 900 mm Speed 4000 rpm Table saw - Spindle pivot 90° - 45° Spindle working length 100 mm max. tool diameter 210 mm max. tenon tool diameter 275 mm max. countersinking tool diameter 180 mm Speeds 3,500/7,000/10,000 rpm General - Motor power 400 V/50 Hz/S6 40% 2 x 5.0 kW (6.6 HP) Weight 470 kg Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Hsdpfxov Erkae Aftjfn Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: Hjdpfx Afsw D T Dketefn T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Hfedpfxsw Sgnke Aftsn Available: at short notice

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Hjdpfx Asxdttpsftjfn Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Throat 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount MK 4 Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head Hjdpfjvutw Hjx Aftefn 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Weight approx. 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Simple and quick speed change using a gear lever Pivoting milling head for angle drilling, milling bevels, etc. Location: from stock 54634 Bitburg - available at short notice -

Condition: excellent (used), Year of construction: 2010, Bernardo VMS 360 vertical band saw. Top condition as a training machine - hardly used The vertical band saws in the VMS series are suitable for sawing almost all sawable materials (e.g. steel, plastic, non-ferrous materials, colored materials, etc.). They are mainly used in general production, in tool and fixture construction for the manufacture of punching and cutting tools. Cutting width: 355 mm Cutting height: 230 mm Working height: 960 mm Cutting speed 20 - 90 m/min Saw band length: 2840 mm Saw band width: 3 - 16 mm Table size: 500 x 400 mm Motor power: 0.75 kW Blade welding device: 2.4 kVA Machine dimensions (L x D x H) 940 x 560 x 1850 mm Weight approx. 250 kg Comes standard with band welding device, annealing device, scissors and grinding stone Comes standard with continuously adjustable cutting speed Machine body made of robust steel construction for smooth running Precision blade guide for optimal cutting results Ideal for sawing complicated contours and shapes Blow-out device with compressor included in delivery For radius sawing, saw bands from 3 mm width available Solid cast iron table, the large support surface ensures safe working Hfsdpfx Afovutxdeton Location: from stock 54634 Bitburg - available at short notice -

Condition: as good as new (ex-display), Year of construction: 2026, Striebig CONTROL Type 6224 Cutting Area: L: 5300 x Hvertical: 2240 / Hhorizontal: 2100 x D: 80 mm Technical Data: Saw weight: approx. 1,200 kg Cutting depth: 80 mm Saw motor power: 5.5 kW (7.5 HP) Saw blade diameter: 300 mm Saw blade bore: 30 mm Emission sound pressure level at workstation LpA: 89.5 dB Saw blade speed: 4,800 rpm 2 extraction ports Ø 140 mm Compressed air connection: 6-10 bar Connected load: 7.3 kW (max 10.7 kW) Power supply: 3 x 400 V / 50 Hz Continuously adjustable scoring saw unit (VSA) Small parts made of aluminium Free-standing support complete, type: 6 ExpertCut Machine data provision (Industry 4.0 ready) Striebig Service Data Import / Label Layout Customized configuration of data import interface and label layout. The customer’s .csv file is checked and tested with the import drivers for cutting optimization. The label layout is adapted and prepared to customer requirements. Hfsdey Ehnyjpfx Afton Location: ex-stock 54634 Bitburg - Immediately available -