Used Corner Connector Press for sale (29,236)

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: Bull15_2026, Electric press brake Bull15 with spindle drive CoastOne - Made in Finland New machine Pressing force: 150t Bending length: 1600mm Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system Hfodpfsx Tgyqjx Ahyob - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers 36 months warranty after installation

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Hjdpox A U Ncjfx Ahyofb Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: good (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, bending force (max.): 66 t, working width: 2,040 mm, stroke length: 200 mm, distance between stands: 2,364 mm, Delem CNC control controlled arrester tools Technische Daten / technical details: Druck / pressure 66 to Abkantlänge / bending length 2040 mm Durchgang zwischen den Ständern / distance between columns 2364 mm Hub (Y-Achse) / stroke (Y-axis) 200 mm Verfahrweg X-Achse / travel of X-axis 600 mm Verfahrweg R-Achse / travel of R-axis 150 mm Hjdox Tgmkspfx Ahysfb Gewicht / weight 5700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1972, Pressure 800 t distance between columns 3250 mm stroke 1100 mm Distance table/ram, stroke up 1900 mm Table surface area 3100 x 1900 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 300 mm Die cushion area in table 2500 x 1800 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 200 mm Die cushion area in ram 2200 x 1000 mm Ram surface 3100 x 1900 mm Side window 900 mm Hfodpfx Ahovuuhyjysb Oil volume 4700 l Power capacity 200,0 kW Dimensions (WxDxH) 4,95 x 3,3 x 10,2 m Height above floor 7,05 m with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1989, Table size 1200 x 780 mm Shearing length 200 mm Max. thickness 4 mm Adjustable cutting angle 15-150 deg. Hydraulic Hjdpfx Aox R Uv Iehyjfb

Condition: good (used), functionality: fully functional, Year of construction: 2000, CNC press brake, 6 axes - Pressing force: 1,300 kN - Bending length: 3,060 mm - Number of axes: 6 programmable (X1, X2, R1, R2, Z1, Z2) - Y-axis rapid traverse: 200 mm/s - Y-axis working speed: 11 mm/s - Y-axis return: 135 mm/s - Travel speeds: X - 500 mm/s, R - 300 mm/s, Z - 1,000 mm/s - X-axis travel: 600 mm - Max. back gauge range X: 860 mm - R-axis travel: 250 mm - Y-axis stroke: 365 mm - Installation height: 535 mm - Y-axis tilt: ±10 mm - Bending length: 3,060 mm - Clear distance between uprights: 2,690 mm - Throat depth: 410 mm - Table width: 120 mm - Working height: 1,050 mm - Oil capacity: 250 l Dimensions: Width: 3,640 mm, Depth: 2,210 mm, Height: 2,885 mm Weight: 12,950 kg Hfodpfxjx S H Uxj Ahysb The machine can be inspected under power!

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: C15_2026, Electric press brake C15 with spindle drive CoastOne - Made in Finland New machine Pressing force: 52t Bending length: 1600mm Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers Hedpfx Asx Tgx Tjhyofb 36 months warranty after installation

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material Hfodpfxsvtpq Hj Ahyjb SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Kingsland HACO ERMS 30 – 100 CNC Pressbrake Model: ERMS 30 – 100 Year: 2006 Control: ATS 560 Capacity: 100 Ton x 3100mm Max. Bending Length: 3100mm Distance Between Columns: 2550mm Hfodpfxjwwvx Ds Ahyob Machine with: Light Guards Full length top and bottom tooling

Condition: used, Year of construction: 2005, Pressure 1000 t distance between columns 4100 mm stroke 1200 mm Distance table/ram, stroke up 2100 mm Table surface area 4000 x 2200 mm pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm Die cushion area in table 3500 x 1600 mm Die cushion pressure in ram 100 t Die cushion stroke in ram 160 mm Die cushion area in ram 3250 x 1600 mm Ram surface 4000 x 2200 mm Side window 1300 mm Hjdpfevuubgjx Ahyjfb Oil volume 8000 l Power capacity 300,0 kW Dimensions (WxDxH) 5,75 x 4,3 x 9,55 m Height above floor 7,7 m year of manufacture 1973 - modernization 2005 with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition Video at seller’s site before dismantling available

Condition: new, Year of construction: 2026, machine/vehicle number: G20_2026, Electromechanical CNC press Manufacturer: CoastOne Oy Type: Cone G20 Pressing force: 600 kN Bending spindles: 3 Controlled axes: X-R axis (2x manual stop fingers) Standard Type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touch screen Options: - 4 or 5 axis backgauge system - Lazersafe light barrier system standard Hsdpfxjx Tgxye Ahyjfb - Lazersafe IRIS light barrier system - Lazersafe IRIS+ light barrier system angle measuring system - extra screen with 3D bending software - support table - Light front and rear - WILA / Trumpf / Type B - tool holder system - 2x bending aids 36 months warranty after installation

Condition: used, Year of construction: 1973, Pressure 1600 t distance between columns 4100 mm slide stroke 1450 mm Distance table/ram, stroke up 2750 mm distance table/blank holder, stroke up 2200 Table surface area 4000 x 2200 mm ram pressure 1000 t Pressure of blank holder 600 t stroke of blankholder 1000 mm blank holder surface 4050 x 2200 mm Ram surface 3200 x 1650 mm pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm Hfsdpfjvut Ifex Ahysb die cushion area 3500 x 1600 mm Side window 1100 mm Oil volume 9000 l Power capacity 390,0 kW Weight 250,0 t Dimensions (WxDxH) 5,95 x 4,3 x 10,5 m Height above floor 8,6 m with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram stored in dismantled condition - Video at seller’s site before dismantling available

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: C12_2026, Electric press brake C12 with spindle drive CoastOne - Made in Finland New machine Pressing force: 52t Bending length: 1300mm Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers Hjdpfsx Tgxgox Ahyefb 36 months warranty after installation

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 Hfjdpjvut Dyofx Ahysb with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: Cone G25_2026, control type: NC control, degree of automation: manual, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 80 t, working width: 2,600 mm, type of crowning: CNC-controlled, warranty duration: 36 months, Equipment: CE marking, angle measuring system, angle stop, documentation/manual, emergency stop, european tool clamping system, finger protection, lower tooling, safety light barrier, upper tooling, Electromechanical CNC press Manufacturer: CoastOne Oy Type: Cone G25 Pressing force: 800 kN Bending spindles: 4 Controlled axes: X-R axis (2x manual stop fingers) Standard Type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touch screen Options: - 4 or 5 axis backgauge system Hsdpsx Tgw Asfx Ahyofb - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS+ light barrier system angle measuring system - extra screen with 3D bending software - support table - Light front and rear - WILA / Trumpf / Type B - tool holder system - 2x bending aids 36 months warranty after installation

Condition: used, Year of construction: 2004, Pressure 630 t Hfedpfx Asv Svarohyeb stroke 800 mm distance between columns 2600 mm Distance table/ram, max. stroke up, adjustment up 1500 mm Table surface area 2500 x 1300 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 300 mm Ram surface 2500 x 1300 mm Side window 1040 mm feed down 600 mm/s feed up 360 mm/s working feed 14 - 42 mm/s power requirement 145,0 kW Weight 85,0 t dimensions (WxDxH) 4,2 x 4,0 x 7,8 m height over floor 6,80 m height beneath floor 1,0 m Demonstration machine from technical university with approx. 920 operating hours! Mint condition! permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, upper and lower stroke limitation, light-guard (Sick) on front and back, hydraulic drawing cushion in table with ejector function, hydraulic cutting impact cushioning, mechanical depth stop via 4 motor-adjustable spindles, hydraulic ram interlocking, two-hand operation 2 tool changing consoles, 4 hydraulic ball roller tracks, 4 dampening elements

Condition: used, Year of construction: 2000, pressure 16 t throat 350 mm stroke 25 mm Hfodpfx Ahsw U Ekveyeb no. of strokes 200 - 1000 /min distance table/ram, max. stroke up, adjustment up 230 mm table surface area 480 x 280 mm Table height above floor 1050 mm ram surface 200 x 110 mm ram adjustment 25 mm diameter of blanks - 1800 mm no. of flutes 16 - 460 material thickness 2,0 mm distance between mid parts spindle and mid ram 160 - 680 mm power requirement 6,0 kW Weight 5,60 t dimensions of the machine (WxDxH) 1,4 x 2,9 x 2,4 m year of manufacture 1971 - new control 2000 with infinitely variable AC-drive, pneumatic clutch (Ortlinghaus), manual ram adjustment, electro-pneumatic blank clamping, automatic stripping device, intermittent control (ram lifting for idle stroke), fully automated centralized oil lubrication, two-hand operation, electrical control Siemens S 7 (yom 2000) various change wheels

Condition: used, Year of construction: 1995, pressure 100 t stroke 20 - 120 mm no. of strokes 40 - 240 /min distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm table surface area 1200 x 800 mm hole in the table 900 x 200 mm table height over floor 1150 mm ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1 - 9999,9 mm power requirement 22,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 3,7 m Hfsdpfx Ahjwc U Nlsyeb height over floor 3,7 m permitted for automatic mode according to the CE-Norm with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication electronic roll feed (make Kaiser, type KWV 250)

Condition: used, Year of construction: 1995, pressure 6,3 t stroke 300 mm throat 250 mm dayligth 520 mm table surface area 330 x 270 mm table height over floor 750 mm oil volume 30 l Hjdjwc U I Uspfx Ahyjfb power requirement 1,5 kW dimensions (WxDxH) 0,9 x 1,3 x 2,2 m permitted for manual loading according to the CE-norm with oil-hydraulic drive, light-guard (make Sick), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 1996, pressure 16 t stroke 4 - 70 mm no. of strokes 140 /min throat 200 mm dayligth 365 mm table surface area 420 x 390 mm hole in the table 160 x 120 mm table height over floor 650 - 840 mm table adjustable 190 mm Hfjdpfx Ahowc U Iuoyeb ram surface 160 x 125 mm ram adjustment 80 mm power requirement 2,2 kW Weight 1,4 t dimensions (WxDxH) 1,0 x 1,6 x 2,0 m permitted for manual loading according to the CE-norm with motor, hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, motorized central lubrication, two-hand operation

Condition: used, Year of construction: 1992, pressure 6,3 t stroke 305 mm throat 250 mm dayligth 850 mm table surface area 470 x 450 mm table height over floor 800 mm ram surface 40 mm feed down 120 mm/s feed up 510 mm/s Hsdpov Svbcefx Ahyjfb working feed 21 mm/s oil volume 175 l power requirement 2,2 kW Weight 1,5 t dimensions of the machine ca. 1,0 x 1,55 x 2,6 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 2003, pressure 63 t stroke 10 - 120 mm no. of strokes 40 - 120 /min throat 280 mm passage to the back 325 mm dayligth 430 mm Hfodpfxevzxtte Ahyeb table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm ram surface 470 x 340 mm ram adjustment 100 mm power requirement 4,0 kW Weight 5,20 t dimensions of the machine ca. 1,3 x 1,7 x 3,1 m x m x m THE PRESS IS READY FOR USE IMMEDIATELY ! permitted for manual loading according to the CE-norm with infinitely variable drive, pneumatic clutch/brake combination (NEW IN 2025), light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, two-hand and foot operation

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 930 mm stroke 200 mm Distance table/ram, stroke up 600 mm table surface area 900 x 860 mm die cushion capacity 100 t die cushion stroke 50 mm die cushion area 350 x 400 mm table height over floor 950 mm side window 380 x 380 mm ram surface 850 x 700 mm feed down 400 mm/s feed up 400 mm/s working feed 30 mm/s oil volume 350 l power capacity 45,0 kW weight 11,5 t Dimensions (WxDxH) 2,0 x 1,2 x 3,4 m Hjdpovuk Trofx Ahyjfb permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, mechanical depth stop with hydraulic cutting impact cushioning no foundation pit necessary as is where is, WITHOUT putting into operation / WITHOUT additional work

Condition: used, Year of construction: 1965, pressure 160 t stroke 15 - 170 mm no. of strokes 15 - 40 /min distance between columns 2050 / 1900 mm dayligth (stroke and adjustment up) 690 mm column travel -side 800 mm table surface area 1600 x 800 mm table height over floor 900 mm ram surface 1620 x 700 mm ram adjustment 140 mm power requirement 15,0 kW Hsdpovuk S Uofx Ahyofb Weight 24,0 t dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm total height over floor 4,8 m height under floor 0,5 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1987, pressure 65 t distance between columns 930 mm stroke 1100 mm distance table/ram, stroke up 1300 mm table surface area 1340x1084 mm hole in the table 604 x 404 mm table height over floor 1000 mm side window 705 mm ram surface 1230 x 990 mm speed down 620 mm/s speed up 207 mm/s working speed 320 mm/s Hsdpfx Ajvuk Szehysfb oil volume 450 l power requirement 15,5 kW weight 8,0 t dimensions (WxDxH) 2,8 x 2,6 x 4,85 m hydraulic fast-stroke trimming press for die-cast parts with oilhydraulic drive, hydraulic shifting devices (4x), hydraulic blank holder in BDC / ejector in TDC in ram, ram interlocking device table surface 1340 x 705 mm or 930 x 1084 mm ram surface 1230 x 705 mm or 930 x 990 mm Insert plate in table with opening 320 x 260 mm as is where is, WITHOUT putting into operation / WITHOUT additional work