Used Corpuls 200 for sale (16,673)

Condition: as good as new (ex-display), Year of construction: 2020, Container rotating device, rotating device Length and wheelbase are adjustable. Dedpfxeigng Ne Ak Ajcp

Condition: used, Year of construction: 2017, Dimensions (L/W/H) 2.645 x 900 x 2.130 mm Filter capacity 14,5 m² Dcodoz I Uc Depfx Ak Aop Number of dust containers 3 St. Weight ca. 500 kg 200 mm

Condition: good (used), operating hours: 1,675 h, fuel type: diesel, Year of manufacture: 2019 Year of construction: 2019 Drive: Wheel GVW: 10.050 kg Mast: articulated arm Working height: 2.000 cm CE mark: yes Dcjdszz Nf Aspfx Ak Asp Technical condition: very good Visual appearance: good Manitou 200 ATJ | Year 2019 | 1,400 hours Very clean Manitou 200 ATJ from 2019, with only 1,400 operating hours. A well-maintained articulated boom lift offering an excellent combination of reach, manoeuvrability and versatility. The 200 ATJ is a popular model within the Manitou range and is suitable for a wide variety of applications, including construction, maintenance, installation and industrial work. The articulated boom provides excellent flexibility, allowing the operator to work over obstacles and reach areas that are difficult to access with a conventional lift. With only 1,400 operating hours, the machine has seen relatively little use for its age. It is in very good condition and is an attractive machine for both professional users and traders. Specifications: Make/type: Manitou 200 ATJ Year: 2019 Hours: 1,400 Very good condition Articulated boom lift Highly versatile Ready for immediate use A very clean Manitou 200 ATJ with a low number of operating hours, ready for its next owner. Call us directly for more information or to arrange a viewing!

Condition: used, FEUTRON Temperature Test Chamber / Climate Simulation Chamber Feutron 3416/16-Ex / TPK 200 Temperature range: -75 °C to +150 °C Water-cooled cascade refrigeration system For sale is a used temperature test chamber from the manufacturer Feutron Klimasimulation GmbH. The temperature test chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. Technical data: Manufacturer: Feutron Klimasimulation GmbH Type: 3416/16-Ex Series: TPK 200 Device type: Temperature test chamber Test chamber volume: 280 liters Temperature range: -75 °C to +150 °C Temperature deviation over time: ≤ ±0.5 K Temperature change rate: Heating: up to approx. 3.0 K/min on average Cooling: up to approx. 1.0 K/min on average Test chamber material: Stainless steel, material no. 1.4301 Test chamber insulation: CFC-free multi-layer insulation Number of shelves: 3 Lighting: 50 W Refrigeration system: Water-cooled semi-hermetic cascade system Refrigerant 1: R507 Refrigerant quantity: 2.5 kg Refrigerant 2: R23 Refrigerant quantity: 0.5 kg Cooling water connection: Cooling water pressure: min. approx. 2.0 bar / max. 6.0 bar Max. cooling water temperature inlet: approx. 18 °C Cooling water temperature outlet: approx. 30 °C Cooling water consumption on average: approx. 0.3 m³/h Power connection: 400 V / 3/N/PE AC / 50 Hz Max. simultaneous power consumption: 5.6 kW Fuse: 3 × 16 A, characteristic C Protection class: IP20 Feedthroughs: 1 × Ø 75 mm with cover cap 2 × Ø 75 mm on the side 1 × Ø 100 mm on the side Dimensions: approx. 1,500 × 1,075 × 2,140 mm (W × D × H) Weight: approx. 680 kg Equipment: Programmable Feutron control system LCD display Program and manual operation Up to 20 programs can be stored RS-232 interface Temperature monitoring 3 stainless steel shelves Test chamber lighting Observation window Several feedthroughs for test specimens Compressed air connection Cooling water supply and return Additional temperature controller Accessories according to images Areas of application: Temperature testing Environmental simulation Material testing Electronics testing Component testing Quality assurance Research and development Lifetime testing Aging and stress tests Condition: Dsdpfoz Hl Dvsx Ak Ajcp Used Device starts Control system and display are active Optical condition according to images Scope of delivery: 1 × Feutron 3416/16-Ex temperature test chamber 3 × stainless steel shelves Fan / accessories according to images Documentation according to images The table shown in the photos and other items not explicitly mentioned are not part of the sale. Shipping or freight transport is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, functionality: fully functional, Year of construction: 2012, load capacity: 2,000 kg, fuel type: electric, fork length: 1,150 mm, empty load weight: 320 kg, total length: 1,750 mm, drive type: Elektro, construction width: 750 mm, Low-lift pallet truck Load center: 600 Fork width: 185 mm Fork thickness: 60 mm Condition: Ready for use and fully functional Technical condition: very good Battery voltage: 24V Battery capacity: 160Ah Djdpfx Aksz Evxns Aocp Description: In addition to this Armanni model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-purchase and financing options at favorable terms are always possible for us. We would also be happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this SL PESATORE 200/200. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale. Electronic weighing system

Year of construction: 1998, condition: ready for operation (used), 200 Ton press Dcsdpfx Aezp Dnzek Ajp 230mm stroke Speed 25-35 SPM Die height 500mm slide adjustment 110mm Main motor 20HP Air pressure 5kg/cm2 Y.O.M 1998

Condition: excellent (used), machine/vehicle number: 00 06 028/00 0026 S, functionality: fully functional, Desiccant air dryer Manufacturer: Motan Type: Luxor LA/8-200 Connection value: 6 kW Dry air flow rate: 200 m3/h Silos for granules: 1 x 150 L 4 x 60 L Material conveying equipment: Manufacturer: Motan Dodjyvfkrspfx Ak Aecp Type: HLX-06-1-A000-0 5 units PRICE REDUCTION FROM 6750 TO 6000 EUR!!!

Condition: new, Year of construction: 2026, NEW ARRIVAL!!! CORMAK AIR55/200 Screw Air Compressor – Compact Power for Your Business Are you looking for a professional solution to power pneumatic tools in your workshop, paint shop, or small production line? The CORMAK AIR55/200 screw air compressor is the perfect choice. With a motor power of 5.5 kW and an impressive actual air delivery of up to 690 L/min, it provides a continuous supply of compressed air essential for the efficient operation of impact wrenches, air blow guns, and spray painting tools. Powered by 400 V, this model has been designed for continuous operation, making it an excellent choice for demanding applications such as smaller workshops, tire service centers, and craft businesses. Investing in a CORMAK screw air compressor is a step towards significantly improving working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The CORMAK AIR55/200 features a reliable and robust direct-drive system that eliminates vibrations and the need for belt drive adjustments. This proven solution ensures stable performance and a long service life by transferring power directly from the motor to the screw compression unit. The maximum operating pressure generated by this screw air compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM series electronic control panel, giving you access to essential compressor information and improving flexibility and control over your operations. ✅ Pressure: up to 10 bar | ✅ Air Delivery: up to 690 L/min | ✅ Power: 5.5 kW | ✅ Power Supply: 400 V Key Features That Set These Models Apart 1. Permanent Magnet (PM) Motor Technology - High energy efficiency: These motors achieve efficiency levels corresponding to IE4 or even IE5 standards. Dcodpfxo Agu N Re Ak Ajp - Excellent performance at low speeds: They maintain high efficiency even at very low rotational speeds, unlike conventional motors, which lose efficiency when operating outside their rated speed range. - Compact and lightweight design: PM motors are smaller, lighter, and generate less heat. 2. Advanced Variable Speed Drive (VSD) Control - Demand-based operation: The compressor does not operate according to the traditional "all-or-nothing" principle (load/unload operation). If your equipment requires only 30% of the compressor's capacity, the compressor automatically reduces its motor speed, consuming proportionally less energy. - Elimination of unnecessary idle operation: Conventional compressors often continue running for several minutes after filling the air receiver, consuming approximately 25–30% of their rated power without producing compressed air. 3. Soft Start Technology - Reduced electrical load: Protects the facility's electrical installation by minimizing high starting currents. - More frequent start-stop cycles: Allows the compressor to start and stop more frequently without the risk of overheating the motor windings. Technical Specifications Motor Power 5.5 kW / 7.5 HP Voltage 400 V / 50 Hz Air Delivery at 0–6 bar Average 690 L/min Air Delivery at 6 bar 690 L/min Air Delivery at 8 bar 650 L/min Air Delivery at 10 bar 650 L/min Air Outlet Connection Diameter (G) 1/2" Dimensions with Air Receiver Tank 1430 × 650 × 1320 mm Weight 170 kg

Condition: excellent (used), functionality: fully functional, Eccentric granulation EGR is used in the production of temperature- and shear-sensitive plastics. It is specifically designed for the granulation of soft PVC, rigid PVC, HFFR formulations, or compounds for low-, medium-, and high-voltage cables based on elastomers. Additionally, the machine can also be used as a conventional single-screw extruder for various processing purposes. • Screw diameter: 200 mm • with degassing zone • Drive power: 72.5 kW Dcedpfx Ajw Iu T Tek Aop

Condition: used, machine/vehicle number: 007307, Max. working width: 3200 mm Max. working thickness: 60 mm Dcjdpfx Akeuaq D Ae Ajp

Condition: excellent (used), Year of construction: 2016, 088 USED Bowls for VMI MAG R 200 mixer. We have 2 pieces of such bowls. Djdpfxjwivw Dj Ak Ascp Year of production: 2016. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), Year of construction: 1995, operating hours: 44,283 h, functionality: fully functional, screw diameter: 30 mm, displacement volume: 98 cm³, injection weight: 88 g, overall weight: 5,300 kg, Angel 90 tons Incl. robot (ASS) Dcsdpfx Akst Dxqto Aop Production in clean room.

Condition: good (used), Description: The machine is in good technical condition, with the possibility of testing by prior arrangement. Maximum turning diameter: 660 mm Maximum swung diameter: 660 mm Dcedoy Amqzepfx Ak Ajp Main spindle: - Speed range: 35–5,000 rpm - Main drive power: 22/15 kW - Maximum torque: 349 Nm - Spindle bore: 76 mm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Sub spindle: - Speed range: 35–5,000 rpm - Power (10 min/continuous): 18.5/15 kW - Maximum torque: 326 Nm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Coolant tank capacity: 300 l Machine power supply: 66 kVA Operating voltage: 400 V / 50 Hz Air pressure: 5 bar, 500 l/min Control system: MAZATROL Fusion 640 MT Flush cooling: - Pump capacity: 20 l/min - Pump pressure: 5 bar Accessories: - Technical documentation - Chip conveyor with coolant - Tool magazine for 20 tools - B axis (positioned at 0.001° increments) - C and Y axes - Sub spindle angular position indexing - Synchronization of main and sub spindle - Tool presetting system (Tool Eye) - Front door locking - 20-position tool magazine - Complete cooling system - Interface for IC memory card

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" Dodpfxsz Iplgo Ak Ajcp FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay Dodpfx Akoz Ipnhs Ajcp F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. Dsdez Ipwcspfx Ak Aecp SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Condition: excellent (used), Year of construction: 2018, Walter Trowal CF 200 Useful volume of the working container: 125 l Filling quantity of ceramic grinding media: 200 kg Filling quantity of grinding media: 150 kg Max. drive power: 4 kW Speed: 1,000 – 1,500 rpm Static fundamental load: 9,600 N Dynamic fundamental load: 14,700 N Dsdjz N Ti Hjpfx Ak Aecp

Condition: used, mileage: 5,783 km, power: 90 kW (122.37 HP), first registration: 05/2024, fuel type: electric, overall weight: 2,390 kg, fuel: electricity, color: silver, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 5, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, traction control, trailer coupling, E07 Hill-start assist, E2Z MBUX multimedia system incl. navigation & DAB, Q10 Crossbars for trailer coupling, FR8 Rear view camera, E1K Navigation package, EX8 Navigation Plus, EY5 Mercedes-Benz emergency call system, SD1 i-Size child seat attachment, EY6 Breakdown management, B25 Parking brake, electric, EI0 Wireless charging system for mobile devices, T68 Child safety lock for doors and windows in the passenger compartment, Z1M Approval M1, IA0 Wheel formula 4x2, LG7 LED High Performance headlights, EZ5 Parking package, XO7 Mercedes-Benz Mobilo with roadside assistance and extended warranty, EZ7 Active parking assist, T78 Sliding door rail cover in vehicle color, Y10 First aid kit, 804 AEJ X3/1, VL2 Velour floor mats, SF6 Driver's seat, height-adjustable with lumbar support, RD9 Tires without specified manufacturer, H00 Warm air duct to passenger compartment, NM5 MB-NA 60 2b with flange, low mounting, M-rpm, C6L Multifunction steering wheel, H22 Heated rear window, JW8 ATTENTION ASSIST, EM7 2 USB ports in the center console in the rear, Z5L POWER STANDARD, Y44 Warning triangle, GA2 Automatic transmission for electric drive, P2F Active safety package, FP3 Mirror package, FP4 Chrome interior package, XC8 VIN visible from the outside, SZ6 Table and illuminated trim on the backrest, JH3 Communication module (LTE) for digital services, X30 Vehicle registration certificate, part II, FQ3 Glove compartment, passenger side, closed, I5T Underbody protection, plastic, RY2 Tire pressure monitoring system on front and rear axle, wireless, CK4 Handle strip above the license plate in vehicle color, CK8 Steering wheel heating, XU1 Signage / ., We will gladly calculate an individual financing or leasing offer for you and take your used vehicle in part exchange. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age / mileage, touch-up paintwork was carried out on the vehicle as part of the preparation. No liability for printing and typing errors. Subject to errors and prior sale ... more on our website. Djdpj Afag Nefx Ak Aocp

Condition: used, mileage: 630,045 km, power: 160 kW (217.54 HP), first registration: 05/2008, fuel type: diesel, empty load weight: 7,520 kg, maximum load weight: 4,470 kg, overall weight: 11,990 kg, axle configuration: 4x2, wheelbase: 4,760 mm, next inspection (TÜV): 02/2027, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: other, number of seats: 2, loading space volume: 40 m³, loading space length: 7,300 mm, loading space width: 2,450 mm, loading space height: 2,250 mm, maximum speed: 90 km/h, Equipment: ABS, compressed air brake, cooling unit, immobilizer system, onboard computer, spoiler, tail-lift, truck registration, * German truck, second-hand * Vehicle ID number: WDB9702571L335989 * Next inspection due by 02/2027 Special equipment: * Reinforced battery * Rear lights for mounting on a tail lift * Air dryer, 1 chamber, heated * Side-mounted spare wheel lift * Tail lift switch * Reinforced rear axle stabilizer (for extremely high loads) Standard equipment: * Emission standard EURO 4 * Axle configuration: 4x2 * Exterior mirrors, electrically adjustable and heated * Cockpit distribution * Roof hatch (steel) * Cab: S (short) * Suspension: leaf spring / air * Generator 80 A * Transmission: 6-speed - Type: G 56-6 * Urea tank (AdBlue): 25 liters * Urea tank (AdBlue): plastic * Rear axle H 4, differential 368 * Interior filter: pollen filter * Body/superstructure: chassis * Fuel tank: 125 liters * Model revision Atego 2 * Engine 4.8 liters - 160 kW diesel (OM 924 LA) * Engine brake with constant throttle * Wheelbase 4760 mm * Disc brakes * Side impact protection * Seats in the cab: passenger single seat, fixed * Seats in the cab: driver's seat, standard suspension seat * Telligent braking system with ABS * Rear underrun protection, fixed * Front underrun protection * Immobilizer * Permissible total weight 11.99 t Dodpfxe Afwx Hs Ak Ajcp Delivery throughout Germany possible!!! Trade-in possible!!! Leasing and financing possible, even without a down payment Errors, printing errors and prior sale reserved.

Condition: good (used), Year of construction: 1999, Universal machining center Machine type: DMG DMU 200 P Control: Heidenhain TNC 430 M Year: 1999 SPECIFICATIONS Travel X-Axis: 1.800 mm Y-Axis: 2.000 mm Z-Axis: 1.100 mm C-Axis: 360° Panning head: H/V B-Axes: 0 oder 90° Djdpe Afm D Ijfx Ak Ajcp Rapid motion: (X/Y/Z): 60 / 40 / 40 m/min. Amount of controlled axes: 4,5 Spindle speeds: 8.000 rpm Spindle power: 30 / 20 kW Torque: 285 Nm Tool: SK 50 Toolchanger Tool capacity: 60 Tool diameter: 230 mm Tool lenght: 450 mm Max. tool weight: 20 kg NC rotary table Table size: 1.700 x 1.400 mm Max. Table Load: 5.000 kg Machine weight: 33.000 kg Equipment Chip conveyor Electronical handwheel Caliper: Heidenhain TS 631 Internal cooling: bar

Year of construction: 2022, condition: used, KOLBUS Box Line Taper BLT 200 year 2022 For the automatic production of raw boxes from cardboard blanks. The BLT 200 is used for uprighting punched and grooved cardboard. Dsdpfx Akoz E Npge Ajcp Configuration: copilot system with touch screen cardboard feeder uprighting channel 4 heat-sealing tape stations 2 sets of knives (4 pcs. each) 2 sets of counter knives (4 pcs. each) servo-controlled drive technology based on Siemens technology Technical specifications: mechanical speed: up to 40 cycles/min cardboard height max.: 525 mm cardboard height min.: 140 mm cardboard width max.: 735 mm cardboard width: min.: 140 mm cardboard thickness max.: 3 mm cardboard thickness min.: 1 mm box length max.: 570 mm box length min.: 56 mm box width max.: 360 mm box width min.: 56 mm box height max.: 170 mm box height min.: 20 mm

Condition: used, Conveyor belt, belt conveyor, toothed belt conveyor, small parts conveyor MONTECH Type TB 250 Order No.: 435016 Year of manufacture: approx. 2010 Usable length: 1070 mm Belt length: 2437 mm Belt width: 200 mm Frame profile height: 40 mm Idler roller diameter: 30 mm Belt speed: 1.7 m/min. Dcsdpsz N H D Refx Ak Asp Motor power: 0.045 kW Power connection: 400 Volt, 50 Hz - Drive via geared motor - Belt body made of aluminum profile system with 8 mm profile groove, suitable for standard groove nuts Overall dimensions L x W x H: 1120 x 320 x 320 mm Weight: 20 kg Good condition

Condition: used, Year of construction: 2008, Technical details: turning diameter: 410 mm turning length: 500 mm control: Fanuc 21i TB standard turning diameter: 275 mm travel -x axis: 277 mm travel -y axis: 82 (±41) mm travel -z axis: 500 mm Spindle 1 RPM: 4500 1/min Spindle 1 Power: 18,5/18,5/15 kW Spindle 1 max. bar diameter: 65 mm turret stations / rotary tool stations: 12/12 Power rotary tools: 5,5 kW RPM of rotary tools: 6000 1/min total power requirement: 39,2 kVA weight of the machine ca.: 6,2 t dimensions of the machine ca.: 3,1 x 2,0 x 2,2 m Dcedpfxszd Un Is Ak Asp collet chuck: Hainbuch Accerories Chip conveyor Robot interface High precision Turning and Milling Centre with Y-axis. Machine was running with oil, not coolant. A fire extinguisher system is installed. *

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 20307, functionality: fully functional, power: 108 kW (146.84 HP), input voltage: 400 V, input current: 270 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,120 °C, inner dimension length: 3,000 mm, inner dimension width: 450 mm, inner dimension height: 200 mm, total length: 16,800 mm, total width: 1,726 mm, total height: 2,398 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: documentation/manual, Conveyor belt tunnel furnace manufactured by Mahler. We used this furnace for the annealing of C-steel parts, utilizing 100% Exogas. The control system has already been upgraded, and all necessary maintenance and repair work has been carried out regularly. Inspection is possible by arrangement. Dsdpfx Ake Af Imao Ajcp Disassembly and removal will be carried out by the buyer, in accordance with the applicable safety and environmental regulations.

Condition: like new (used), Year of construction: 2022, operating hours: 30 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 2,550 rpm, grinding wheel diameter: 200 mm, input frequency: 50 Hz, Equipment: double-sided, In very good condition; it was only used as a production backup in case of emergencies. Dedpfe Afxbrjx Ak Aocp One coarse and one fine grinding wheel. Painted in RAL 9007.