Used Corrisaint Machines for sale (65,859)

Condition: used, Year of construction: 2003, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 8,300 kg, spindle speed (max.): 36,000 rpm, spindle nose: HSK E50, number of slots in tool magazine: 30, Equipment: chip conveyor, Machining Center - Vertical Manufacturer: MIKRON Type: HSM 800 Year of manufacture: 2003 Control system: Heidenhain iTNC 530 Technical specifications: X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle speed: 36,000 rpm Tool holder: HSK E50 Number of tool stations: 30 Machine weight: approx. 8,300 kg Condition: used Technical features & accessories: - Workpiece magazine - Chip conveyor - Oil mist/air filtration system - Water cooler Dwodpfx Ao Ah Ic Iei Eod Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to modifications and errors in the technical data and specifications; prior sale reserved!

Year of construction: 2010, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Maximum machining length: 3,100 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 3,000 kg Windows 7 operating system Minimum quantity spraying Clamp detection and automatic repositioning 6 pneumatic material clamps Loading is included in the price Very good condition Dedsxvp Nkepfx Ai Eewd

Condition: used, Year of construction: 1984, Max. bending length: 2540 mm Max. sheet thickness: 8 mm steel Top roller diameter: 200 mm Right and left rotation via foot switch Safety rope pull switch Dwsdpfxoxwyfrs Ai Ejd Conical rounding possible Motorized rear roller delivery Lower roller adjustment via handwheel with position indicator Weight: approx. 4,500 kg

Condition: used, Year of construction: 2000, Saddle stitcher: Dsdj Aifwkopfx Ai Ejwd Maximum format: 320 x 520 mm Maximum output: 120 cycles/minute

Condition: used, Stanzautomat für Kalender und Notizbücher / Punching Machine for Calender and Notebooks Stanzautomat / Calender - Block Punching Machine Plastograph PZ 599 Baujahr / Year 1998 Arbeitsbreite / Working width 120 - 600mm Papierlänge / Paper length 100 - 550mm Arbeitsbreite min. 95mm - max. 600mm Hubzahl einstellbar / number of Strokes adjustable 30 - 120/min. Flachstapelanleger / Flat Pile Feeder 5 Stanz-Formen / 5 Punching Tools: Types Wire-O 2:1 / 3:1 - Plastik-Effekt / 3:1 4x4mm / 3:1 4x6mm Werkzeug 4x4mm mit Daumenstanzung / Tool 4x4mm with calender hole punch Auslage Rüttler / Delivery Jogger Panel Operation and Controls Dwodj Aikhxepfx Ai Eod Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Eckenheftmaschine Drahtheftmaschine / Corner Stitching Machine Polygraph 790 Kartonagen Drahthefter / Carton Corner Stitcher Typ / Model 790/2 Serial-No. 907127 Fußpedal / Foot pedal Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Djdps Aikh Hefx Ai Eswd

Condition: used, Eckenheftmaschine Drahtheftmaschine / Corner Stitching Machine Polygraph 790 Kartonagen Drahthefter / Carton Corner Stitcher Typ / Model 790 Serial-No. K 377 Fußpedal / Foot pedal Dwsdpfxj Aikh Ro Ai Eod Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Specification: Vector Speed: X/Y= 50m/min Dwsdpfx Aie Acw Hne Esd Vector Speed: Z = 15m/min Workpiece length: min. 200 mm Workpiece length: max. 3050 mm Workpiece width: min. 70 mm Workpiece width: max. 850 mm Workpiece Thickness min: 8mm Workpiece Thickness max: 56mm Drill Block with 13 Vertical Spindles Drill Block with 4 Horizontal drills in the X Direction Drill Block with 2 Horizontal drills in the Y Direction Grooving Saw X Direction Plausibility Check 5Kw Tool Change Spindle 4 Position Tool Changer Energy Saving Mode 400V 50Hz CE Marked

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Dwedpfx Ajlrqiqsi Ejd Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 1,525 x 660 x 610mm, Table 1675 x 660mm, Dwedpfx Aiezh I Ebe Esd table load 2,000 kgs, Spindle speed 12,000 rpm, input 18Kw, Hurco Winmax 5Control, Spindle taper Din 40, 30 ATC, Coolant, Low volt light, Swarf Conveyor, spindle probe

Condition: excellent (used), Year of construction: 1999, Double-sided multi-purpose edge sanding machine with oscillation and 200mm sanding height. Langzauner LZK 4-S with veneer edge sanding side and solid wood sanding side. 200mm sanding width. Motorized sanding belt oscillation, therefore no compressed air connection required. Drive motor 400V / 3kW. Front work table for sanding veneer edges with grooved stop guide (for veneer overhang). Veneer sanding attachment with fine adjustment, foldable. Spring-loaded table, height adjustable and can be positioned laterally. Angle stop. Rear, inclinable work table for sanding solid wood. Both tables are height adjustable to utilize the sanding belt. Dwsdpfx Aisz I T Apj Esd Belt dimensions 3000 x 200mm. Side extension table for radius sanding on the 150mm belt roller. Feed stand holder 68mm. Central dust extraction connection 140mm. Very stable chassis, 2 swivel casters, 2 steering casters and lever brake for locking. CE marking. All graphite pads and dust extraction hoses have been replaced. Original paint, only touched up in places. Excellent condition from a small restoration workshop. Some sanding belts are included. Dimensions approx. 1800 x 1000 x 1250mm (L x W x H). Weight approx. 650kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this seller".

Condition: used, total height: 5,100 mm, total width: 2,600 mm, pressing force: 65 t, For sale: Schuler toggle drawing press PK No. 630 Dwodpfewab T Ejx Ai Eod

Condition: used, Year of construction: 1992, The WENZEL RS 30-12-15 CNC coordinate measuring machine (3D-CMM) is suitable for precise 3D measuring tasks in quality control, production metrology, and incoming goods inspection. It is equipped with a CNC control system and a Renishaw PH10 / TP20 probe system. The large measuring range of 3,000 x 2,000 x 1,500 mm (X/Y/Z) enables the measurement of large workpieces. Djdpfezqc Hrox Ai Eewd The machine is ideal for use in tool, mold, and machine manufacturing, as well as in any application where highly precise coordinate measurements are required.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Fanuc Series 180iS-WB control system Dwsdpfozvd Saex Ai Eed Travel ranges: X 320 mm, Y 220 mm, U 120 mm, V 120 mm, Z 180 mm Max. workpiece weight: 500 kg Machine weight: 1,700 kg Power supply: 13 kVA The machine can be inspected while powered on.

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, wood lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs can be stored for turning and milling operations. Hydraulic copy sensing of a pattern or template. The roughing and copy tools are equipped with fine adjustments. Template adjustment can be made from the front and rear via fine-threaded spindles. The copy length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within the stages, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 RPM Speed stage 2: 350 - 3400 RPM Distance between centers approx. 1550mm Copy length with steady rest approx. 1350mm Bed length approx. 2100mm Feed rate continuously adjustable, rapid traverse with safety end stop. Hydraulic copy slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release device. Numerous accessories: Ring steady rest with front turning tool and insert aid. Four-jaw steady rest. Four-jaw chuck 125mm. Copy tools, center punches, hexagonal drivers, etc. Milling unit with 3kW motor for mounting on the copy slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots retouched. Very good condition from a small carpentry shop. The machine apparently was not used to produce large quantities. Djdpszfwm Nofx Ai Eowd Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz Dsdpsu T Ty Hjfx Ai Eswd - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: used, Year of construction: 1999, functionality: fully functional, magnetic clamping plate 1400 - 700 mm x-travel 1400 mm y-travel 300 mm dismantled ja Dwodpfjvu Hlqsx Ai Esd weight of the machine ca. 6 t

Condition: used, Year of construction: 1990, working area D= 30 mm Number of stations 2 0 material length 3000- 6000 mm speed 20 m/min weight of the machine ca. 6,5 t dimensions of the machine ca. 9 x 2 x 2,4 m Belt grinding line with 2 grinding units for pipes and bars. Surface of round material is grinded by through feeding. Dedpfs Aiiqwjx Ai Ejwd

Condition: used, Year of construction: 1993, x-travel 0500 mm y-travel 400 mm z-travel 420 mm table-size 800 x 400 mm Djdo Aiirbspfx Ai Eswd feed range 1- 3000 mm/min rapid traverse 0,083- 5 m/min Tool bore ISO 40 turning speed range 20- 4000 U/min main drive DC 5 kW CNC control 355 HH total power requirement 10,9 KW weight of the machine ca. 2300 kg dimensions of the machine ca. 2,5 x 2,5 x 2,0 m CNC milling machine with Heidenhain TNC 355 Control and housing arround working area.

Condition: like new (used), max. wheel diameter 420 mm gear width 120 mm max. module 8 min. module 0,5 control BWO CNC no. of strokes 32-800 Hub/min total power requirement 50 kW weight of the machine ca. 9 t dimensions of the machine ca. 5,3 x 3,9 x 3,4 m Machines increase 100 mm intermediate plate automatic Hublageverstellung automatic Hublängeverstellung 5 axis controlled machine BWO last type C, D, X, Z, L axes are CNC x-travel 360 mm z-travel 154 mm L-travel 137 mm max. table load 1000 kg Control system Total power requirement 50 kW Machine weight approx. 8400 tonnes Space requirement approx. 5.3 x 3.9 x 3.5 m o Straight guide o Machine elevation 200 mm o With automatic workpiece clamping device Djdotycgfopfx Ai Eswd o Counter holder Year of construction: approx. 1989

Condition: good (used), Year of construction: 1998, sheet width 2520 mm plate thickness 6.0 mm ST thickness at "Niro-steel" 4.0 mm stroke of upper beam 250 - 350 mm plate thickness 8.0 mm ALU Adjustment folding beam 80.0 mm bending angle max. 135 - 180 ° work height max. 935 mm control SCHRÖDER NC Djdpj Ah Idtofx Ai Eowd total power requirement 9.0 kW weight of the machine ca. 4.800 kg dimensions of the machine ca. 4200 x 2250 x 2250 mm Approx. new price: 85.000 euros Special price upon request Equipment: - Dynamic, high-performance motorized folding machine - SCHRÖDER NC control unit with LCD display * Manual, setup, and automatic operation modes * Rapid programming for individual parts * Swiveling control panel (positioned at the front right) - NC-controlled motorized backgauge * Includes rear sheet support surface - NC-controlled motorized bottom beam adjustment - 1x mobile dual footswitch - 1x set of bending tools (installed) - Emergency stop button (front-mounted) - Operating manual (PDF)

Condition: used, Year of construction: 2010, x-travel 2600 mm y-travel 1100 mm z-travel 900 mm control Heidenhain iTNC530 spindle turning speed range 0-10.000 U/min tool taper SK 50 Tool magazine slots 30 St./pcs. table surface area 3200 x 1100 mm max. table load 1200 kg rotary table dia. 1050 mm weight of the machine ca. 25550 kg Features/Accessories: -IKZ 40 bar -electric handwheel -technical documentation Dwodps Ah T Udsfx Ai Ejd

Condition: new, working width max. 630 mm workpiece width - max. 1.0 - 100 mm sandingbelt width 650 mm Dwodpfxsz It Irs Ai Eod sandingbelt length 1900 mm weight max. in kg 300 kg/lfm feed 0.5 - 6.0 m/min min. 50 x 50 mm rated capacity 22.0 kW weight of the machine ca. ca. 2.150 kg dimensions 1320 x 2250 x 2200 mm Description: - A universal, compact entry-level machine for processing steel, stainless steel, and aluminum. - Infinitely adjustable abrasive belt speed allows for the reliable removal of cutting burrs and the creation of a surface finish. - Our flap-wheel grinding unit ensures uniform edge rounding on all sides and a non-directional finish. - The speed-controlled rounding unit enables various degrees of edge rounding, ensuring optimal processing for every application. - Features a 150 mm wide magnetic track and a 400 mm wide vacuum track for the efficient processing of small parts (from 50x50 mm). - Integrated vacuum generation ensures low noise emissions. - Our quick-change tool system guarantees minimal setup times when switching applications, increasing both your flexibility and productivity. - Intuitive operation via a touch panel ensures that any operator can quickly become proficient with the machine. - Program memory allows for automatic machine settings and reproducible processing results. - Low initial investment combined with high productivity ensures a rapid return on investment. - The sophisticated design results in minimal requirements for cleaning, maintenance, and repairs. - Excellent accessibility within the machine facilitates ... - Fast and effective cleaning during material changes Equipment: - R + E (Roller + Brush) unit configuration - Hybrid transport table: 150 mm magnetic + 330 mm vacuum - Adjustable vacuum power (down to approx. 70 mbar) - Interior lighting - Belt cleaning brush - Program memory (up to 10,000 programs) * Special accessories included: - 1x Abrasive belt (SMD 122, L=1900, W=650, P120, Cubitron 2) - 2x Abrasive flap roller (SMD 1x3, OD 250, ID 45, L=250, grit 120) - 1x Dry extraction system (DDE 3002, excluding ducting) - 1x Standard ducting set (for DDE/WDE 3002, for SMD 122)

Condition: used, Year of construction: 2002, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 9,500 kg, spindle speed (max.): 36,000 rpm, spindle nose: HSK E50, number of slots in tool magazine: 30, Equipment: chip conveyor, Machining Center - Vertical Dwjdpe Ah T Tyofx Ai Esd Manufacturer: MIKRON Type: HSM 800 Year of manufacture: 2002 Control system: Heidenhain iTNC 530 Technical specifications: X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle speed: 36,000 rpm Tool holder: HSK E50 Number of tool stations: 30 Machine weight: approx. 9,500 kg Condition: used Technical features & accessories: - Workpiece magazine with 4 stations - Chip conveyor - Oil mist/air filtration system - Water chiller Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, Year of construction: 1997, CNC-controlled high-pressure waterjet cutting system with two cutting heads, abrasive feed, and two external high-pressure pumps. Manufacturer: H.G. Ridder Automatisierungs-GmbH Model: HWH-6020-2 Machine type: CNC waterjet cutting system Year of manufacture: 1997 Working area: 6,000 x 2,000 mm Number of cutting heads: 2 High-pressure pumps: 2 external pumps Maximum pump pressure: 4,000 bar each Control system: Siemens SINUMERIK Cutting process: Waterjet cutting with abrasive feed Cutting head designation: WARDICUT Abrasive feed: Present Cutting table: Water basin with slat support Machine order number: 10317 Electrical schematic number: E-10317 Electrical connection value: 100 kVA Dsdpfx Aie Aiccdj Eowd Mains connection: 3-phase Mains frequency: 50 Hz Operating voltage: 400 V Control voltage: 230 V AC / 24 V DC Rated current: 150 A Intended upstream fuse: 200 A, slow-blow