Used Cross Cut Machine for sale (86,798)

Condition: good (used), reciprocating cross-cut saw For cutting glue laminated beams to length machine length 2200 mm Machine width 1200 mm Fedpfxeg E Iqfo Agrjpb working height 850 mm without control

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, GF MachiningSolutions CUT E350 Year of manufacture: 2017 Control: AC CUT HMI Travel distances (X/Y/Z): 350 x 250 x 250 mm Travel distances (U/V): +/- 45 mm Fjdpfsxbzimox Agrepb Taper: +/- 30° at 77 mm height Workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Collision protection on X/Y/Z axes Best surface finish on carbide/steel: 0.12/0.18 µm Maximum cutting speed: 300 mm²/min Overall dimensions: 1750 x 2470 x 2200 mm Total weight: 2525 kg The machine is cleaned, overhauled, and tested by us after receiving your order. We are happy to perform a test cut tailored to your needs. Optional services: - Commissioning and training - Transport - Warranty - Cooling unit

Condition: excellent (used), Year of construction: 2001, Paper format: min. 10 x 16 cm // max. 35 x 50 cm Brochure format: min. 8 x 5 cm // max. 35 x 25 cm Equipment / Additional information: Page circumference 80 gr./m2 up to 100 pages Work cycles max. 4000 per hour 4xHohner 48/5 stitching heads Easy adjustment option for head stitching Fpjdpfx Ager Ti Nbersb Break-in sword fold with adjustable folding rollers Front cutting unit via upper and lower knives

Condition: new, Year of construction: 2024, Under-table cross-cut saw UTK-600 also with a pneumatic vertical front protective shield Execution according to the new current PLC safety control ltd. Of the new machinery directive Technical specifications: - Motor power 7.5 kW S1 - Max. Saw blade diameter: 600 mm - Saw blade holder: 35 mm - Cutting time per stroke: 4 sec. - Speed ​​on the saw shaft: 2800 rpm - Air consumption per cycle: 20 L - Working table height: 900 mm - Extraction nozzle: 2x120 mm, 1x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 520 kg - Necessary air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase Cutting capacity in mm: 30 x 800 50 x 765 Fjdjf Sqy Dopfx Agrjpb 140 x 600 180 x 340 200 x 200 Standard basic equipment: - Saw blade feed pneumatic drive - * NEW two-hand safety PLC control - Automatic engine brake - Set of operating keys - Emergency stop button - Speed ​​regulator for saw blade feed - Fixed vertical protection - Upper safety pressure device (pneumatic protective hood) - suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: used, Year of construction: 2004, functionality: fully functional, cutting width (max.): 400 mm, cutting length (max.): 6,000 mm, total width: 5,400 mm, total length: 13,500 mm, total height: 2,500 mm, saw blade diameter: 800 mm, type of input current: three-phase, rotational speed (max.): 800 rpm, DePauw QCUWSCNC18 Double Cut Cross Saw, manufactured in 2004. Fully functional and well maintained, suitable for immediate use in production. Cutting width: 400 mm Cutting length: 6,000 mm Fjdpfx Asw Nbhmjgrepb Total machine dimensions: 13,500 mm (length) × 5,400 mm (width) × 2,500 mm (height) Rear saw blades: 800 mm diameter, maximum speed 1,500 rpm Front saw blades: 500 mm diameter, maximum speed 3,000 rpm Saw type: Double Cut Cross Saws Condition: Used, fully operational. Location: Cork, Ireland Delivery available at buyer’s expense. Price: €25,000 Contact for more details or to arrange a viewing.

Condition: new, Year of construction: 2025, Working width: 600 mm Fjdpfxshwrp Rj Agropb Working height: 220 mm minimum workpiece length: 250 mm aggregates: 4 1. saw-cutting aggregate Random System: saw-cutting optics 2. brush : metal, diameter 220mm 3. brush : Tynex grit 60, diameter 220mm 4th brush : Tynex grain 120, diameter 220mm Height adjustment: hand wheel Height indication: mechanical counter Feed speed: 4 - 12 m/min Motor power saw-roughening gate: 1,1 kW Motor power brushes: 4 kW Motor power feed: 0,37 kW Machine length: 2800mm machine width: 1500mm Machine height: 1600mm Weight: 1500kg

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Tecnau Roll to Cut&Stack’ paper cutting machine. Item for sale: 1 x Tecnau Roll to Cut&Stack Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested and is fully functional. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Fjdpfxew E Hcpo Agropb A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Year of construction: 2024, condition: new, - 6.000mm cutting length - min. cutting length 600mm - 5 saw supports - 80 - 140 mm cutting height - 4 KW saw motor Fpodpfxopfcgae Agreb - 1,5 KW stepless feed 10-30m/min Optional - Disposal conveyor belts

Condition: excellent (used), Year of construction: 2006, USED HOMAG HPP250R/44/44 PANEL SAW TECHNICAL CHARACTERISTICS. Specifications: Cutting width of (4,400 mm) maximum cutting height (72 mm) of the main saw; 10 HP (7.5 kW) and 3 HP (2.2 kW) scoring motor, 4400 RPM main blade and 5100 RPM scoring blade. saw cart working speed of (80 M/min), return speed of (80 M/min), driven by AC electronically controlled inverter drive; Quick blade release "Power-Lock" system. automatic cut length controlled by optical sensor that detects the blade through the cut Pliers pusher: (7) material grippers, (0-60M/min) forward speed and (0-60M/min) return speed, AC inverter driven, center mounted rack and pinion servo motor; Friction-free contact measurement system, magnetic measurement system. Fpedpjixz A Ejfx Agreb Control and machine operator: Controller software PC with: Homag "CAD MATIC " Operating system + "Windows"; full "REAL TIME" user friendly operating menu; 15" full-color graphics monitor, standard optical mouse and keyboard for data entry; basic on-board "Easy Cut Optimizer" organizes up to (15) pieces of (3) different materials, data loading from a PC from the office is possible, the possibility to link third party optimization software. With complete : (4) air float tables (600 x 1,800 mm), tables are individually selectable with a common 5 HP (4 kW) blower motor HOMAG MODEL HPP250 R 44/44 USEFUL CUT 4,400 X 4,400 MM USEFUL CUTTING HEIGHT 72 MM Nº4 FRONT AIR TABLES Nº 7 PNEUMATIC PLIERS TO FIX BOARDS LOWER PNEUMATIC SIDE LAYER SILENT DRIVE CARRIAGE SYSTEM ACTUATED BY RACK AND PINION ELECTRICAL PANEL WITH AIR CONDITIONING OPTIMIZATION SYSTEM WITH LABELING MACHINE

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. Fpjdpfjdy Hrdsx Agrjb - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: used, Year of construction: 2016, Used machine Cross sanding machine Year of construction 2016 Product advantages Underneath perfectly lacquered, stained or oiled wood surfaces there is always a perfectly sanded surface! Felder sanding machines are characterized by solid construction, state-of-the-art machine technology and maximum productivity. The most important highlights at a glance: ? Sanding width 1350mm ? Sanding width 3-170mm ? Combined superfinishing unit ? Touch-screen control for work processes ? The Felder operating concept guarantees maximum process and work safety Your advantages at a glance: Time saving ? Motorized adjustment of the contact roller in the 1/100 mm range from the control panel ? Innovative unit arrangement for pre-sanding / fine sanding of veneered workpieces ? Brushing devices at the machine outlet ? Lacquer sanding against additional equipment ? comfort ? Fixed feed table height (machine head adjusts) ? Touch screen control with clear image display and program memory ? Machine data acquisition for sanding belt wear and much more. ? Tool-free handling when changing the sanding belt ? Large fold-down table extensions for the heaviest workpieces ? flexibility ? Units for calibration, fine sanding and lacquer sanding ? Variable feed speed up to 20 m/min by means of inverter Innovation ? Electronically segmented sanding pad with silicone technology for minimum air consumption ? Combined superfinishing unit incl. chevron sliding belt to compensate for oscillation marks ? quality ? Solid machine construction ? Durable machine components Basic equipment Control unit finish 1350 classic Control unit with 7" color touch screen 100 program memory locations Maintenance intervals Plain text error messages Ammeter for load monitoring Feed table fixed infeed height - fixed table, 900mm, electric height control of the units incl. fine adjustment from the control panel, V-speed infinitely variable from 2.8-20m/min. Adjustable via inverter from the control panel Manual protection and workpiece over-thickness protection Workpiece detection sensor with 25 sensors 55 mm segment width Endlessly manufactured belt conveyor with honeycomb structure Automatic feed carpet centering Cross sanding unit finish 1350C high gloss Segmented, electronic-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Chevron sliding belt between sanding pad Sanding belt for homogeneous sanding without oscillation marks Variable pressure control on the operating side Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection 1 motor with 7.5 kW (10 hp) Star-delta start-up Cleaning fan with time control Cutting speed 12 m/sec Sanding belt 140 x 4560 mm Fsdpfx Aow I Uv Usgrspb Combined superfinishing unit 1350C: Rubberized, grooved contact roller with 85-90° Shore hardness and 142 mm diameter Electromot. Position-controlled grit compensation segment, electro-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Variable pressure control on the operating side Chevron sliding belt between sanding pad and sanding belt belt for homogeneous sanding without oscillation marks Mechanically pre-tensioned rubber pressure rollers Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection

Condition: new, Year of construction: 2025, Working width: 400 mm Working height: 220 mm minimum workpiece length: 250 mm aggregates: 2 with fine adjustment 1. saw cut aggregate Random System: saw cut optics 2. brush : Tynex brush, grain 80, diameter 220mm Height adjustment : Handwheel height indication: mechanical counter Feed rate: 4 - 12 m/min Motor power saw-roughness: 1,1 kW Motor power brushes: 3 kW Motor power feed: 0,37 kW Fsdpjgrladjfx Agrspb Machine length: 1400mm machine width: 1400mm Weight: 550kg

Condition: used, No. 04480 Cross-cut and mitre saw Graule ZS 135 N Used This machine type is used for cutting to length and for horizontal and vertical miter cuts, double mitre cuts are also possible Precise ball bushing guide of the tool slide on hardened and ground steel shafts Fast mitre adjustment up to 25° horizontally and up to 45° vertically Adjustable fixed stops at 90° and 45° Machine can be set to mitre in 2 planes Adjustable aluminum stop plates Sturdy cast iron construction Lower saw blade guard can be connected to extraction system 3 kW three-phase 400 volt brake motor (special equipment) Saw blade diameter 350 mm, Saw blade holder 30/40 mm, cutting height 135 mm, cutting length 430 mm, saw blade inclined at 45°: Cutting height 92 mm Including saw blade for aluminum 350 mm diameter Including machine stand for type ZS 135 N Fsdpfxsw Htm Rj Agropb Including roller conveyor RLK 3000 x 350 mm, with length stop with scale and material stop that can be folded back, roller diameter approx. 40 mm Transport dimensions machine approx. 1300x700x1700 mm LWH, roller conveyor approx. 3000x500x800 mm LWH Weight approx. 300 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, GF AgieCharmilles CUT 300 Fjdpfx Agsw D Accorspb Year of manufacture: 2013 Charmilles Millenium CNC Control Travel (X / Y / Z): 550 x 350 x 400 mm Travel (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes automatically lowering work tank (drop-door) Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed: 340 mm²/min Best surface finish: Ra 0.10 µm Available wire diameters: 0.15 to 0.33 mm Dimensions of complete system: 2600 x 2600 x 2340 mm Total weight of system: 3300 kg The machine is cleaned, completely overhauled and tested for all functions after order confirmation. You receive a 6-month warranty on the machine. Commissioning service is available upon request.

Year of construction: 1983, condition: good (used), strip width 1.600 mm Fedpobidg Eofx Agrepb strip thickness 0,3 - 3 mm reference material (tensile strength) 420 N/mm² speed 68 m/min. at 6.000 mm plate length 23 m/min. at 400 mm plate length

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3940x850x1350 mm Fpodpfx Agsvz Eytsreb Weight 410 kg Total power requirement 5,5 kw

Condition: used, Year of construction: 1999, machine/vehicle number: 103638, Falzmaschine / Folding Machine Heidelberg Stahlfolder KD 78-4-KZ Year 1999 - Serial-No. 103638-258036 Arbeitsbreite max. 780mm / Working width max. 780mm Rundstapelanleger / Round Pile Feeder 1. Station 4 Taschen / 1. Station 4 buckles 2. Station 3 Schwerter links/rechts Auslage / 2. Station 3 knives left/right delivery Fsdpfsmikq Aex Agrspb Stehendbogenauslage / Delivery Stacker Stahl SBP 46 Rietschle Kompressor / Rietschle Compressor Inklusive Handbücher / Manuals included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 201, saw blade diameter: 800 mm, cutting height (max.): 300 mm, cutting width (max.): 550 mm, total length: 2,000 mm, overall weight: 1,000 kg, total width: 2,300 mm, total height: 2,000 mm, working height: 940 mm, input voltage: 400 V, saw drive: 11,000 W, saw blade bore: 40 mm, operating pressure: 8 bar, Ideal cross-cut saw for the timber trade or sawmills. Solid and robust machine, well suited for beams and laminated beams, for packaged goods but also individual pieces. Can be integrated into a cantilever rack due to its compact frame construction. Saw blade emerges from below, stably guided. Safe two-handed operation with large protective hood. Entire machine virtually maintenance-free. Pneumatic clamping cylinders right and left. Completely workshop-tested and ready for use. Fpedpfxsudwzce Agrjb Saw blade included.

Year of construction: 2020, condition: used, No. 3233 Cross milling machine Wema Probst QBV 200 Used, year of construction 2020 The machine is in mint condition, less than 30 holes have been drilled. The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs. This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment. Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc. The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column. The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out. The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill. Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools Wood diameter: 60 - 200 mm Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range Motor capacity: 2.2 kW Number of revolutions: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm LWH Weight approx. 380 kg Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Fedpfxewt Abwe Agrepb Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, GF AgieCharmilles CUT 2000X Year of construction 2018 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Fpodpet I Dtnefx Agrob Travel paths U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 - 0.30 mm incl. KIT 50 option Incl. automatic wire changer AWC Water bath machine with automatic wire threader With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D Incl. glass scales for X- and Y-axis VISION 5 control unit 15" LCD color screen, lifting keyboard and mouse Incl. Conic-Plus option for improved taper Incl. Threading Expert Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine is completely overhauled and tested by us. An individual test cut is also possible. We also offer commissioning and on-site training for this machine.

Year of construction: 1991, condition: good (used), design: rotary shear strip width: 500 - 1.650 mm Fpsdpfxsgnyy Ts Agreb strip thickness 0,3 - 2 mm

Condition: used, Year of construction: 2012, x-axis 350 mm y-axis 250 mm z-axis 256 mm U-axis +/-70 mm V-axis +/-70 mm Fpodpfx Aswtr Dzsgrjb dimension of workpiece 750 x 550 x 256 mm Working hours 29.559 h -edm hours 29559h

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, The GF AgieCharmilles CUT 30P, built in 2011, is a powerful and precise used wire EDM machine specifically designed for demanding machining applications in the metalworking industry. Thanks to state-of-the-art technology and intelligent control, the CUT 30P offers the highest cutting quality, low maintenance requirements, and an excellent return on investment. Main Features & Benefits: ✅ Large work area: Workpiece size: max. 1050 x 800 x 350 mm Maximum workpiece weight: 1000 kg Travel paths: X/Y/Z: 600 x 400 x 350 mm U/V: ± 50 mm Conical machining up to ± 25° / 80 mm ✅ High-precision machining: Positioning accuracy thanks to glass scales Automatic wire tensioning for consistently precise cutting results Surface quality up to Ra < 0.25 µm ✅ Efficient wire system: Wire diameter: 0.15 – 0.30 mm Automatic wire feeding and rethreading 25 kg wire spool for long operating times ✅ Intelligent control & user-friendliness: Windows-based control with intuitive user interface 15" LCD display for easy programming DXF import & 3D graphic check for precise simulations ✅ Reliability & low operating costs: Fpsdpfx Aev S Ua Degrsb Energy-efficient generator with low power consumption (9 kVA) Low maintenance costs thanks to robust construction and durable wear parts Integrated collision protection for maximum safety Ideal for: ✔ Tool & mold making ✔ High-precision components ✔ Series production & prototyping Experience maximum productivity with the GF AgieCharmilles CUT 30P – The perfect choice for precise and economical wire EDM! 📌 Our used machine, built in 2011, is cleaned, overhauled, and comprehensively tested before sale to ensure the highest quality and reliability. 📩 Contact us for a customized quote or demonstration! We are also happy to offer commissioning and training on the machine.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2013 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper angle: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Fpjdpjwprq Tefx Agreb Achievable surface finish: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged wire EDM with automatic wire threading With automatic, two-sided lowering tank Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D Incl. automatic wire changer AWC (for use with 2 wire spools) Incl. Conic-Plus option Incl. Fast-Threading option Incl. Smart-Threading option VISION 5 CNC control AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be thoroughly cleaned, reconditioned, and extensively tested after order placement. A laser measurement of the axes will be performed at our facility. We are also happy to carry out a customized test on the CUT 3000 for you. Operator training at Techma on your reconditioned machine included Optional extras available: - Transport - Commissioning - Chiller unit - Clamping devices - Consumables

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, GF AgieCharmilles CUT 400 Sp Year of manufacture 2013 Control system: HMI 1 Travel paths (X / Y / Z): 800 x 550 x 510 mm Travel paths (U / V): 800 x 550 mm Max. taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Fjdpfswmmvlex Agrepb Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Including option for large wire reel of 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is kept in our warehouse and will be cleaned, overhauled, and tested for all functions upon receipt of the order. Optional: - Commissioning of the machine at your premises - On-site training - Cooling unit - Transport - Clamping bar set