Used Ctp Computer To Plate for sale (22,926)

Condition: excellent (used), Year of construction: 1990, overall weight: 17,500 kg, total height: 500 mm, total length: 6,000 mm, total width: 3,000 mm, plate width: 3,000 mm, Floorplate Length:6000mm Floorplate Width:3000mm Cgjdpfx Aeygwa Tefpjn Length: 6000mm Width: 3000mm Height: 500mm Weight: 17500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 09233-K06P27, working width: 3,100 mm, stroke rate (max.): 10 1/min, sheet thickness (max.): 16 mm, distance between stands: 3,400 mm, working height: 900 mm, TECHNICAL DETAILS Sheet width: 3,100 mm Sheet thickness: 16 mm Frame gap: 3,400 mm Shearing angle: 2.5° Working height: 900 mm Backgauge: 1,000 mm Hold-downs: 14 units Strokes per minute: 10 MACHINE DETAILS Control: CYBELEC CybTouch 6 Total power requirement: 30 kW Dimensions & Weight Space required: approx. 4,150 x 2,360 x 2,450 mm Machine weight: approx. 16,400 kg Oil capacity: 500 l EQUIPMENT Electric backgauge 1,000 mm Electric cutting gap adjustment Codpoygw Epefx Afpjgn Electric cutting angle adjustment Cutting length limitation Light barrier at rear of machine Finger guard at front Ball rollers in support table 1x side stop 2x front support arms Foot switch

Condition: excellent (used), Year of construction: 2011, control type: NC control, number of rollers: 4, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller length: 3,100 mm, working width: 8 mm, sheet thickness (max.): 8 mm, overall weight: 8,200 kg, total length: 6,200 mm, total width: 1,800 mm, total height: 3,900 mm, power: 8 kW (10.88 HP), Rolling width: 3100mm Rolling thickness 3x toproll Ø:10mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending: 8mm Top Roll Ø: 290mm Bottom Roll Ø: 270mm Side roll Ø: 250mm Number of rolls: 4 Rolling speed: 1 - 5 Top support: yes Power: 8kW Length: 6200mm Width: 1800mm Height: 3900mm Weight: 8200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Cedpfx Afeygvwdspegn

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Csdpfx Aev Tk Exsfpsgn Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Condition: ready for operation (used), Zeer compacte snij- en slitlijn Enkele eenheid bestaande uit: 1 - afwikkelaar 5 ton, maximale diameter van de spoel: 1000 mm 2 - richtmachine 3 + 4 rollen, 90 mm roldiameter Codpfx Aswwbfvefpsgn 3 - schaar voor het op lengte knippen 4 - snij-eenheid met 5 snijmessen 5 - Operatorkast met CNC-besturing (frequentiegestuurd)

Condition: used, Dimensions: 40 x 12 x 1.5 mm Cjdpfx Afjt Sr Uhjpjgn Set: 25 pieces Type: HL Board

Condition: used, Rotatable: +- 45° Chain width: 17 mm Motor: 2.2 kW Table tilting: +- 45° Further data: See PDF Cjdpjtunbuofx Afpsgn Mortiser for lock cases, door lock mortiser, or also chain mortiser / chain chiseler Framar type MC 60 for simultaneous milling of lock cases and drilling door holes in doors and windows as well as many other applications. Chain width: 17 mm Motor: 2.2 kW

Condition: good (used), Year of construction: 2004, overall weight: 6,000 kg, total height: 245 mm, total length: 5,990 mm, total width: 1,250 mm, Floorplate Length: 6000mm Floorplate Width: 1250mm Height: 245mm Cgodpfxexdltue Afpjn No. Of T-slots: 5 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Length: 5990mm Width: 1250mm Height: 245mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, First registration: 23/05/1980, vehicle identification number: 10628, permitted gross weight: 40,000 kg; NOTE: The low loader’s registration documents are missing. A statutory declaration of loss by the owner, required for the application of new documents at the relevant road traffic authority, is available and will be handed over to the highest bidder or buyer of the low loader! Cgsdpfxjyf R Eao Afpen

Condition: used, empty load weight: 7,850 kg, maximum load weight: 22,150 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 04/2021, loading space length: 9,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 245/70R17,5 ---/140J, color: other, gearing type: other, front tire size: 245/70R17,5 ---/140J, rear tire size: 245/70R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,000 mm, loading height approx. 900 mm, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Cgsdpfeygrqasx Afpsn

Condition: good (used), Year of construction: 1982, Cutting length 4.300 mm Cutting height 1.800 mm machine weight ab. ca. 600 kg kg Codjygm Tiopfx Afpjgn

Condition: used, Technical details: sheet width: 1500 mm plate thickness: 2,25 mm distance between columns: 1600 mm back gauge: nein cutting angle: nicht bekannt ° cutting gap adjustment: nein mm down holder: über Druckleiste Stück Cjdpfx Afou Icn Eopsgn height over floor: 850 mm Table dimensions: LXB 1800 x 350 mm weight of the machine ca.: 0,85 t dimensions of machine: 2,0 x 0,8 x 1,3 m simple mechanical guillotine shear with shelf right/left 305 x 100mm operation via ON/OFF *

Condition: used, Year of construction: 1992, Technical details: sheet width: 3000 mm plate thickness: 2,0 mm distance between columns: 3300 mm back gauge: 580 manuell mm cutting angle: Nein ° cutting gap adjustment: Nein mm down holder: 13 Stück Table dimensions: 3300 x 300 mm weight of the machine ca.: 3,0 t dimensions of machine: 3,7 x 1,5 x 1,8 m incl. 2x upper knife and 2x lower knife each 1500mm Cgjdpfx Afsu Icnropsn incl. table supports 1500 x 1500mm with roller elements 2x profile strips L: 1400mm 1x side stop bar 1600mm operation via control panel and/or foot pedal *

Condition: used, machine/vehicle number: 16072, Fotodirekte Offset-Druckplattenkamera - Plate Exposer Heidelberg QUICKPLATER 40 Foliendicke / Foil thickness 0,1 - 0,2 mm Folienstanzfunktion (nur Langformat) / Foil Punch System (only lengthways format): Heidelberg Quickmaster 46, d. h. zwei U-förmige Löcher mit einem Abstand von 220 mm symmetrisch zur Mitte der Folienvorderkante Folienformate / Foil Size: Querformat / landscape format max. 404 x 510mm Langformat / Long Size: max. 350 x 510mm Querformat / landscape format min. 222 x 250mm Vorlagenformat / Template format max. Bei Verkleinerung auf / when reduced to 70,7 %: 440 x 614mm Bei Verkleinerung auf / when reduced to 64 %: 448 x 575mm Motivformat auf der Folie / Motiv format on Foil max.: 1:1 Querformat / landscape format: 350 x 505mm 1:1, gestanztes Langformat / punchd long size: 350 x 480mm 1:1, ungestanztes Langformat / not punch long size: 350 x 469mm 70,7 %, Lang/Querformat / Long/landscape format: 311 x 434mm Codpfx Afeh Axk Ispogn 64 %, Lang/Querformat: Long/landscape format:287 x 370mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1999, Druckplatten - Entwicklungsmaschine / Plate Processor AZ FEYear 1999 - Serial-No. XX158 Working width max. 300mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Cgsdpeh Ax R Ujfx Afpen On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2002, machine/vehicle number: 98, Heizplatte / Heating Plate Busse HPT 900W Serial-No. 98 822 Heiztemperatur einstellbar / Heating temperature adjustable Csdpfx Aeupy S Njfpegn Arbeitsfläche / Working area max. 350 x 650mm 5 Trockenklammern / 5 Drying clamps Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2013, machine/vehicle number: 81300019158, Kolbenpumpe und -kompressor für CTP Anlagen / Piston Pump and Compressor CTP Processor Thomas - Rietschle 2750BGHISS75Baujahr / Year 2013 - Serial-No. 081300019158 für CTP Anlagen (Beispiel Agfa) / for CTP Processors (examplae Agfa) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Cgjdpfx Ajh Eg Txefpjn On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Hydraulische 4 Plattenspresse - Hydraulic 4 Plates Press Lechner IV B Baujahr / Year 1976 - Serial-No. 1214 4 Pressplatten  / Size with 4 pressure plates Pressfläche / Press size: 1 Pressplatte / 1 Press Plate 440 x 280mm - 2 Pressplatten / 2 Press plates 610 x 440mm Pressdruck regulierbar / Pressure adjustable max. 6000KG Cgodewhgaaepfx Afpen Platzbedarf  (Höhe-Breite-Tiefe) / Place require 140 x 155 x 51cm Gewicht / weight 780kg Elektr. Antrieb / eletric power 400 Volt, 3 Ph, 50 Hz., 1,1 kW Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Druckpalttenstanze  - Plate Punch Bacher 2048 Palttenstanze / Plate Punch Bacher 2048 Serial-No. 277 Druckplattenstanze für Heidelberg SM74, SORM Plate Punch for Heidelberg SM74, SORM Cjdpfoxg D Dwsx Afpegn Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Druckplattenbelichter - Plate Exposer O.M.S. COPYSTAR 4050 Serial-No. 93-2023 Format / Size max. 400 x 500mm Voltage 230V AC - 2800W Cedpfx Afev Am Rvopsgn Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 1990, overall weight: 1,200 kg, Faceplate, Werner Gigant, Type: PL 1600 - Cast Iron, Without Jaws Diameter 1600 mm with transport frame. Cjdpfxjwaidfs Afpjgn Weight approx. 1200 kg. See photos for details. Good condition.

Condition: used, Used Sondex model SF229-IS stainless steel plate heat exchanger. Transmission surface approximately 360 m2. Hot side is rated min/max allowable pressure -1/10 bar at min/max allowable temperature -20/165°C. Cold side is rated min/max allowable pressure -1/10 bar at min/max allowable temperature -20/165°C. Cgjdpoygvbpjfx Afpjn

Condition: used, table length 1000 mm table width 660 mm table height 870 mm Cgsdpfx Aeu Sbf Dsfpon total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 2014, length 1200 mm Cgedjv Ig Acspfx Afpen width 800 mm Thickness 160 mm

Condition: used, floor-plate length 1050 mm floor-plate width 1050 mm floor-plate height 60 mm weight of the machine ca. 0,2 t dimensions of the machine ca. 1050x1050x0,1 m table plate of PFSU 1600, Ø 1050 mm Cgodpfx Afou Sbfkopjn