Used Defective for sale (994)

Condition: used, machine/vehicle number: WJMA1VPH60C31xxxx, mileage: 730,000 km, Year of construction: 2014, Please contact ATS Norway for more information Please provide reference number upon request: 22008 Specifications: EU-approved until 30.01.2026 Model year: 2014 Mileage: approx. 730,000 km Automatic Full air suspension Tires (see photos) Euro 6 Length: 697 cm Width: 255 cm Wheelbase: 340 cm Curb weight: 9,050 kg 6x2 510 hp Damage at the lower front (visible in photos) Additional lights Bed Radio/CD Climate control / AC Description:2014 Mercedes Actros tractor unit sold as a repair object.The gearbox is defective and must be replaced.Ready for delivery. Km: 730000 HK: 360 Technical approved: no EU-approved until: 04.10.2025 Own weight: 9290 Total Weight: 27000 Payload: 17950 Width: 255 Hsdpfjx E Nnnjx Agzeg Length: 697 Euro: 6 Model: Actros 2551 6x2 Trekkvogn. Rep objekt. Gearbox: Automatic

Condition: good (used), Year of construction: 1954, Drilling machine, bench drill, pillar drill, column drill -Table size: 400 mm -Spindle mount: MK4 -Protrusion: 320 mm -Speeds: VIP gearbox 80-700 rpm Hsdpfx Aedi Smkogzeg -Columns: Ø 160 mm -Spindle stroke: 175 mm -Feed rate: 0.09-0.28 mm/rev -Tachometer defective -Dimensions: 1100/500/H1960 mm -Weight: 650 kg

Condition: ready for operation (used), Indramat 2AD180D-B350A1-BS03-D2N1 Asynchronous main drive motor SN: 512 / terminal board defective, used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hodpfx Agjudghlezeg

Condition: used, functionality: fully functional, Year of construction: 2006, 1. Electric Forklifts (Still unless otherwise specified) • 2760122 – Electric Forklift, RX60-50, 2013 • 2760146 – Electric Forklift, RX60-35, 2016 • 2760147 – Electric Forklift, RX50-16, 2011 • 2760158 – Electric Forklift, RX20-20, 2013 • 2760159 – Electric Forklift, RX20-18, 2010 • 2760163 – Electric Forklift, RX20-20, 2008 • 2760181 – Electric Forklift, RX50-16, 2011 • 2760210 – Electric Forklift, RX50-15, 2006 2. Gas Forklifts • 2760126 – LPG Forklift, RX70-35T, 2018 • 2760130 – LPG Forklift (defective), RX70-35T, 2019 • 2760132 – LPG Forklift (defective), RX70-35T, 2019 • 2760143 – LPG Forklift (defective), RX70-30T, 2008 • 2760145 – LPG Forklift, RX70-35T, 2019 • 2760177 – LPG Forklift, RX70-35T, 2019 3. Diesel Forklifts • 2760157 – Diesel Forklift, RX70-35, 2011 4. Electric Tow Tractors Still • 2760151 – LTX70, 2019 • 2760160 – LTX70, 2019 • 2760161 – LTX70, 2019 Hjdpfjx I Efhjx Agzeg • 2760164 – LTX70, 2019 • 2760171 – R06-06, 2007 • 2760174 – EGA50, 2001 • 2760206 – LTX70, 2019 • 2760211 – LTX70, 2015 Crown • 2760180 – GPC3055, 2017 • 2760189 – GPC3055, 2017 • 2760202 – GPC2040, 1998 • 2760203 – GPC2040, 1998 5. Electric Pedestrian Stackers Still • 2760184 – EGV14, 2009 • 2760185 – EXV20, 2019 • 2760190 – EXV20, 2016 • 2760191 – EXV20, 2016 • 2760192 – EGV16, 2010 • 2760193 – EXV20, — • 2760214 – EXV20, 2016 Jungheinrich • 2760156 – Jungheinrich 6. Low-Lift Pallet Trucks (Electric) Still EXU / EXU AC / EXU 22 • 2760152 – EXU20 AC, 2009 • 2760168 – EXU20, — • 2760175 – EXU20, 2009 • 2760186 – EXU20, 2009 • 2760187 – EXU22, 2016 • 2760188 – EXU22, 2011 • 2760194 – EXU22, 2016 • 2760195 – EXU20 AC, 2009 • 2760196 – EXU20, 2012 • 2760197 – EXU20, 2012 • 2760215 – EXU22, 2016 Other Still models • 2760165 – EGU20, 2004 • 2760182 – ECU30, 2014 • 2760183 – EGU2000, 1993 • 2760204 – EFU2000, 2006 7. Tow & Pallet Trucks (Mixed Types) • 2760171 – Electric Tow Tractor (Still R06-06), 2007 • 2760174 – Electric Tow Tractor (Still EGA50), 2001 8. Summary • Electric Forklifts: 8 units • Gas Forklifts: 6 units • Diesel Forklifts: 1 unit • Electric Tow Tractors: 12 units • Electric Pedestrian Stackers: 8 units • Low-Lift Pallet Trucks (electric): 19 units • Mixed Tow/Pallet (special types): 2 units

Condition: ready for operation (used), For sale: Matco A316L-PRE-ME pallet wrapper. A robust and reliable machine, suitable for efficient pallet wrapping. Operates on 380V and has been fully inspected. The machine is in good working order and immediately ready for use. Features: Type: Matco A316L-PRE-ME Connection: 380V Sturdy, industrial design Suitable for intensive use Technically inspected and in proper working condition Hsdpfox Rdwujx Agzjg Condition: Used, but in excellent working order Additional information: Invoice possible upon sale Working demonstration video available via WhatsApp Stretch film optionally available See my other listings for more machines Trade-in of defective pallet wrapper possible Interested? Feel free to send a message via Marktplaats for more information or to arrange an appointment. Keywords (for searchability): stretch wrapper, pallet wrapper, mobile wrapper, wrap robot, wrapping machine, film machine, self-propelled wrapper, robotic pallet wrapper,

Condition: used, mileage: 441,834 km, power: 80 kW (108.77 HP), fuel type: diesel, gearing type: mechanical, first registration: 02/2011, next inspection (TÜV): 03/2026, emission class: euro4, color: silver, number of seats: 9, Year of construction: 2011, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, soot filter, * €6,400 net * Volkswagen Crafter 2.5 TDI 80 kW L3H2 Maxi, 9 seats, wheelchair lift, air conditioning, Euro 4 ENGINE BROKEN!! * Seats (8+1) * Flex-i-Trans conversion * Tinted windows * 6-speed manual transmission * Radio CD * Driver airbag * USB * Electric windows * Electric mirrors * Central locking * Automatic climate control * Front & rear parking sensors * Front air-suspended seat * Cruise control * ABS * ESP * 6 wheelchair spaces * Wheelchair lift 400 kg lifting capacity * Wheelbase: 433 cm * Unladen weight: 2,769 kg * Payload: 731 kg * Gross vehicle weight: 3,500 kg * Passenger vehicle registration * Vehicle no. 13 ?ENGINE DEFECT/MOTOR DEFECT? OPENING HOURS Monday - Friday from 09:00 - 17:00 (by appointment only...) CONTACT DETAILS Hedpex Rfq Ajfx Agzsg Phone: WhatsApp: Email: We offer transit and export license plates. Errors and prior sale excepted. Technical specifications and equipment details must be checked separately. Only the condition inspected and confirmed in writing at the time of purchase is contractually binding. Please arrange an appointment in advance...

Condition: used, mileage: 117,898 km, Year of construction: 1978, Serial number: 100xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21424 Specifications: 1978 model 117,898 km Rep. Object 205 hp 6x2 Manual transmission Tires (see pictures) Rust of the rear housing (see pictures) Frame sand blue and varnished a few years ago Battery needs to be replaced. Tipping box Foldable aluminum limbs Internal length in plan: 6,115 m Internal width in plan: 2,475 m Light Heater Ready for delivery   Crane specifications: 1979 model 10 t/m crane 2 Hydraulic outriggers 2 Hydraulic extensions 1 Hydraulic extension on main boom 1 Manual Manually controlled Ready for delivery   Description: We have a 1978 Scania LB 81 6x2 Crane truck w/ 10t/m crane and tipper ekt for sale. The car is being sold as a repair item as it is no longer EU approved and there are errors and defects. There is a bad battery on the car, these should be replaced. Starter is starting to get bad. Errors and deficiencies exist and some cost must be taken into account to get it back in good condition. Ready for delivery Km: 117898 Hjdpfoxgcrgex Agzjg HK: 205 Technical approved: no EU-approved until: 28.02.2019 Own weight: 10100 Model: LB 81 6x2 Kranbil m/ 10t/m kran og tipp ekt Gearbox: Manual

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 223A011235001, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-9 mm Year: 2012 Machine-No.: 223A011235001 Condition: Refurbished Our latest project was the refurbishment of this fully automatic strapping machine SMB CUBE 600x600c from 2012. You might be able to see from the outside and from the price that this CUBE is a second-hand machine, but when you look at the list of spare parts and labour hours used, it becomes clear: this machine has been extensively refurbished to its original condition and is now as good as new; perhaps even a little better. As good as new with the CUPASO refurbishment With our reconditioned used machines, you get as-new technology at used machine prices. We make sure that we only refurbish technology that still meets today's requirements. This also applies to the SMB CUBE 600x600c offered here. We also offer you our comprehensive service for this refurbished device. In addition to our 12-month guarantee, this includes the long-term supply of consumables, spare parts and technical service. Prepared for integration into automated packaging lines Even as a stand-alone machine, this CUBE can be customised to your requirements. The machine detects incoming parcels or product stacks and straps them once or several times according to the previously defined parameters. With the help of the pneumatic package press and the package height-dependent strap tension, packages of different sizes and characteristics can be processed unsorted and individually. By adding a machine of the same design, which is also available from us, it is even possible to realise cross or multiple strapping at high speeds. This is what we promise Hjdjt Uzv Tepfx Agzsg Our guarantee commitment of a full 12 months of course also applies to our SMB CUBE 600x600c. This means you are on the safe side. If something should break during this period, we will replace the defective component and install it at our expense (excluding wear and tear and travel). And if you decide quickly, you will receive our exclusive pre-sale discount of 10%. Do you have any questions? We look forward to your call or e-mail and will be happy to show you our current projects and new equipment in our showroom. Why don't you come and visit us? Features: • Economical due to maximum availability • Robust and extremely low-maintenance design • Simplest handling • Minimal space requirement • Best cost/benefit ratio • Max. 35 parcels/min; depending on back-tensioning path and frame size, without package pressing • Mobile machine (2 fixed/ 2 steerable rollers with brake) • Table height 770 -1000mm • Driven conveyor belts • Machine colour: Frame RAL 7004 / Frame RAL 7016 Special features: • Signal exchange: 2 x counter plug with tool • Additional light sensor for mounting on leading or following machine • Signal exchange: Do not strap package • External button: Do not strap package • Package height-dependent belt tension (laser sensor) • Pneumatic package press (600x600) • Double press bar 600 • Draw-in protection on table top, infeed side

Condition: new, Heidenhain ULS 300/20 length measuring rod. 239 740-02 ML 270 mm, serial number as per photo, unused, rubber sleeve defective (porous), 100% functional Hodei Eazuopfx Agzjg

Condition: used, maximum load weight: 12,350 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2005, Equipment: ABS, tail-lift, ATTENTION: Refrigeration unit not operational! Equipment: * Schmitz box body with insulated walls, * MBB tail lift 1,500 kg, * Air suspension, * SAF axles, * ABS, * Disc brakes, * Tire size 385/65R22.5 Miscellaneous: * First registered in Germany, Hodpeuirdvsfx Agzeg * One owner, * Payload 12,390 kg, * Gross vehicle weight 18,000 kg, * Refrigeration unit defective Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim, near Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles, including vans, commercial vehicles, and construction machinery! We offer you attractive financing options with favorable special conditions at all times. If you are interested, we will gladly provide you with a personalized offer! Trade-in of your commercial vehicle is possible. If a new TÜV inspection is required, we can offer you a quote from our partner workshops. Our offer generally does NOT include a new TÜV certificate. Delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. The information provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed features. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment should be checked separately if necessary. Subject to errors and prior sale.

Condition: used, mileage: 793,645 km, power: 375 kW (509.86 HP), first registration: 09/2016, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, fog lights, navigation system, parking heater, power mirror, retarder, seat heater, soot filter, spoiler, = Additional options and accessories = - Aluminum fuel tank - Bluetooth - Brake booster - EPS (Electronic Power Steering) - Low noise - Intarder - Particulate filter - Radio/CD player - Rain sensor - Sliding roof - Sleeper cab - Side door Hsdpfx Ajx Rdi Rogzsg - Seat heating - Auxiliary heater - Toolbox = Further information = Front axle: steering; Suspension: leaf spring Rear axle: Suspension: air suspension Unladen weight: 7,814 kg Payload: 11,186 kg Gross vehicle weight (GVW): 19,000 kg Reference number: 67 Vehicle number: 67 Mercedes Benz Actros 1851 / Retarder / Compressor / Euro 6 / Engine defective!!! VIN: WDB96340310089308 Suspension: leaf / air Transmission: automatic Air conditioning Retarder Engine brake Cruise control Auxiliary heater Emission standard EURO 6 Compressor Engine trouble!!! Engine defective!!! = Company information = Al Shogran GmbH An der Glashuette 15 41516 Grevenbroich Tel.: Mobile : Mrs. Sabine Faust Email.

Condition: repair required (used), Year of construction: 2002, functionality: limited functionality, For sale is a presetting device of the company Mapal and the type Uniset-V The device itself is in good condition and functional, however the digital display is defective and needs to be repaired Measurement of tools, undercuts and distances possible as well as clamping between centers is no problem Technical data: Manufacturer Mapal Type: Uniset-V Year of manufacture: 2002 Digital display Heidenhain Electric axis control 4 axes travel + turntable Additional shelf with sockets for printer etc. No data sheets or operating instructions available Weight approx. 1.5 tons Dimensions: approx. 1.75m*0.75m*2.41m Hjdpfxsmkikfo Agzjg Loading & or shipping possible for an extra charge Prices plus value added tax Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, machine/vehicle number: YV2JSW0C08A67xxxx, mileage: 448,556 km, Year of construction: 2008, Please contact ATS Norway for more information Please provide reference number upon request: 21171 Specifications – Car: 2008 model Hodpfxew Sc Ruj Agzeg EU-approved until: 31.01.2027 Odometer reading: 448,556 km I-Shift automatic transmission Power: 480 hp / 353 kW Drivetrain: 6x2 Euro 4 engine Front suspension: steel Rear suspension: air Tires (see pictures) Total length of the platform with full extension: 7.442 m Hydraulic extension: 1.5 m Foldable side doors Nox sensor recently replaced Central lubrication Air conditioning / AC Radio Extra lights   Specifications – Crane: 2008 model 370.11/8S Certified until: 05/2026 All bearings in the crane joints have been recently replaced 8 hydraulic extensions 1 manual extension Winch is disconnected (defective) 4 support leg Remote control Ready for delivery   Description: Volvo FM480 crane truck with 37 tm Effer crane (both 2008 model) for sale. The crane has had its bearings replaced in all joints and is ready for use. The winch is disconnected due to a fault. The car otherwise functions as it should according to the owner. Faults and defects may occur, and some additional costs must be expected. The crane truck is ready for delivery. Km: 448556 HK: 480 Technical approved: Yes EU-approved until: 31.01.2027 Own weight: 18000 Total Weight: 28000 Payload: 9925 Width: 255 Length: 1040 Euro: 4 Model: FM480 kranbil m/2008, 370.11/8S Effer kran SE VIDEO Gearbox: Automatic

Condition: used, mileage: 153,000 km, power: 368 kW (500.34 HP), first registration: 01/2014, fuel type: diesel, overall weight: 33,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 01/2028, color: orange, gearing type: automatic, emission class: euro5, loading space volume: 17 m³, Year of construction: 2014, Equipment: ABS, air conditioning, Internal vehicle number: G300331 German vehicle Available immediately at our yard in Kaufungen - Kassel More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Vacuum pump: 2,007 hours HD pump: 2,743 hours Vehicle Data — Scania R500LB 8x4 * Manufacturer: Scania * Model: R500LB 8x4 * First registration: 03.01.2014 * Engine: 15.6 l diesel, 500 HP (368 kW) * Transmission: Opticruise * Emission standard: Euro 5 * Seats: 2 * Axle spacings: * 1st – 2nd axle: 390 cm * 2nd – 3rd axle: 135 cm * Curb weight: 20,500 kg * Gross vehicle weight: 33,000 kg * Payload: 12,425 kg * Gross train weight: 66,000 kg * Suspension: Air suspension ----Body — Müller CM F 170 KT (Year of construction 2013) * Sludge tank: 10 m³ * Water tank: 7 m³ * Water tank + hot water tank * Uraca high-pressure pump: 170 bar * Sludge suction function * Snow plow mount at the front * 2 radio remote controls Hodpfx Agsxc R Uhezjg * Frost protection: * 2 × Webasto heaters on the body * 1 × Webasto in the cab * Body year: 2013 HIGH-PRESSURE PUMP Manufacturer: Uraca Type: KD 718/60 Pump no.: HD-11305664 Max. pressure (bar/liters/min): 170/325 Max. speed (rpm): 1516 VACUUM PUMP Manufacturer: CVS Type: W 1600 Pump no.: 92009002/164 Max. output (cbm/h): 1540 Max. speed (rpm): 1501 Max. continuous operation pressure (bar): 0.5 DISCHARGE WHILE TIPPING SUCTION HOSE CASSETTE Technical equipment and vehicle features * Total height: 3,900 mm * Operation at subzero temperatures: Equipped with frost protection system and can operate down to -5 °C. * Webasto heaters: A total of three Webasto air heaters: * Two units on the body (for system frost protection) * One unit in the driver’s cab * Water heating / hot water circulation: Vehicle fitted with hot water tanks. * Technical defects: Currently, no known defects or repair needs. * Tank separation: Fresh and wastewater compartments are separated via a tipping silo. * Condition of chassis frame: The frame is in very good, clean condition with no visible rust damage. ----Additional information * Side-mounted water tanks: Yes, two stainless steel (VA) side water tanks – one each on the right and left side. Capacity per tank: approx. 3,500 liters Financing example: * Internal number: G300331 * Purchase price: €142,900.00 * Down payment: 10% * Term: 60 * Monthly rate: €2,238.16 * Residual value: €28,580.00 If you are interested in this offer, or would like to have it customized to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors excepted. We are happy to take your used vehicle in part exchange. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: ready for operation (used), Bosch SD-B4.070.030-01.000 brushless servo motor, hole spacing of the mounting holes: 117 x 177 mm, Ø drive shaft: 24 mm, used, strong signs of wear, 1 connector housing defective, 100% functional Hedpfxei D E Tps Agzeg

Condition: like new (used), Year of construction: 2023, operating hours: 5 h, functionality: fully functional, machine/vehicle number: DED000302, type of input current: three-phase, negative pressure: 2,950 Pa, total height: 2,500 mm, total width: 1,030 mm, total length: 2,650 mm, volume flow: 5,500 m³/h, overall weight: 760 kg, input voltage: 400 V, extraction nozzle diameter: 250 mm, noise level: 73 dB, input current: 10 A, power: 5.5 kW (7.48 HP), rotational speed (max.): 3,000 rpm, input frequency: 50 Hz, We are selling a Höcker Polytechnik extraction system, model "Vacumobil VT250-L", year of manufacture 2023. Only 5 operating hours! The unit was used exclusively with our edge banding machine in the showroom and is in 100% working condition. The chip collection containers have never had to be emptied, as the machine was operated only minimally. ▪ Suitable for installation directly in the working area (depending on dust type) ▪ Low residual dust content < 0.1 mg/m³ (H3) in accordance with TRGS 553 ▪ 100% utilization of thermal energy through air recirculation ▪ Large discharge volume of 3 or 4 tonnes ▪ Online filter cleaning available (at additional cost) Hsdpfex N Tb Hox Agzeg ▪ Height less than 2.5 m ▪ PLC control, standard with automatic start and text display ▪ Drive with IE3 efficiency class ▪ Optimized filter cleaning ▪ Integrated automatic fire suppression system ▪ Certified back-pressure flap integrated ▪ No explosion venting required for St1 dusts ▪ BG-certified filter material (separation efficiency 99.95%) ▪ Low energy consumption and high extraction performance The machine is available for immediate collection. No known defects. Warranty has expired.

Condition: repair required (used), functionality: not functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, For sale is an injection molding machine from the Arburg brand and the type 470 C 1600-800 The pump and a card have been removed from the machine, so the machine is being sold as defective. It is otherwise in very good condition Technical data: Pump hours: 61,400 Clamping force: 1600 kN Clear column spacing: 470*470 Ejector travel: 225 mm Screw diameter: 50 mm Displacement: 398 cm³ Dimensions: 4335*1635*1950 mm Weight: 6950 kg Hedov Edrijpfx Agzeg The machine is offered without peripherals Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit us on our website

Condition: used, mileage: 104,000 km, Year of construction: 2017, Serial number: VF3YB2MFB12D0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21925 Specifications: 2017 model Approx. 104,000 km Will be EU-inspected before sale 4x4 131 hp Tyres (see photos) New studded winter tyres Summer tyres The 4WD system has been replaced Timing belt has been replaced LED light bar at the front will be removed (it is defective) Side door sensor does not work optimally (affects cargo area lighting) 3 seats Manual transmission Hodpex Am Sijfx Agzjg AC/climate control Radio/DAB Delivery by agreement Description:2017 Peugeot Boxer 4x4 van with two sets of tyres.Comes with brand new studded winter tyres.The sensor controlling the cargo area light does not work optimally.The vehicle will be EU-approved before sale.Delivery by agreement. Km: 104000 HK: 130 Technical approved: no EU-approved until: 04.10.2025 Own weight: 2040 Total Weight: 3300 Payload: 1185 Width: 205 Length: 541.3 Euro: 6 Model: BOXER

Condition: ready for operation (used), Indramat CPUB 02-01-FW 261366 Serial Interface, key switch defective see photo, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Hodpei Ebb Rofx Agzjg

Condition: used, feed length X-axis: 500 mm, feed length Y-axis: 430 mm, feed length Z-axis: 400 mm, For sale is a package of four identical Hermle UWF 801 milling machines. Two of the machines have minor defects that require repair, while the other two are fully functional. This package is offered, but individual machines are also available for sale at the regular price. Technical specifications: X-travel: 500 mm Y-travel: 430 mm Z-travel: 400 mm Spindle mount ISO: SK40 Spindle head swivels left and right: right/left = 90° Quill stroke vertical: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed: X+Y: 4 - 1600 step mm/min Feed: Z: 4 - 1000 step mm/min Rapid traverse: X+Y: 1.6 m/min and Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Approx. weight: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Tool holders, tools, and vice are not included in the package. However, they can be offered individually. Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Hjdpfx Aev Tc Apjgzog Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website.

Condition: ready for operation (used), Heidenhain UVR 130D Converter ID: 377 639-01 SN: 23867698G, professionally fully overhauled and tested, with 3 months warranty, 100% functional, scope of delivery as shown in the photos. Important notice: In the exchange procedure, your defective exchange part must not show any mechanical damage, such as breakage, as these are beyond repair. In such cases, an additional charge of €600 including VAT will apply. Attention: You are bidding for a Heidenhain UVR 130D inverter (part number 377 639-01, SN23867698G) on an exchange basis (exchange service), professionally overhauled and tested, supplied with a 3-month warranty, 100% functional. Delivery contents as per the photos. Please note: Both in repair and exchange processes, your returned defective part must not have any mechanical damage such as cracks or breaks, as these cannot be repaired. In this event, a supplementary invoice of €600 including VAT will be issued. Hsdjx Ht Etspfx Agzeg

Condition: repair required (used), functionality: limited functionality, travel distance X-axis: 500 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, mount diameter: 40 mm, total height: 1,800 mm, total width: 1,500 mm, total length: 1,600 mm, table width: 800 mm, table length: 395 mm, For sale is a conventional milling machine with active control from Hermle and type UWF 801 A hydraulic hose is defective and has already been removed and replaced. After installation, the machine is fully functional and ready for use (we can do this for you) The machine is easy to use and yet efficient, which makes it ideal for the do-it-yourselfer but also for industry. x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Spindle mount ISO: SK40 Spindle head swivels left and right: right/left = 90° ° Quill stroke vertical: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed: X+Y: 4 - 1600 steples mm/min Feed: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 and Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Hodpfxovtpm Uj Agzsg For more information or contact options, visit us on our website

Condition: ready for operation (used), Heidenhain UP 110 braking resistor ID: 341 516-01 SN: 39716984F, professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per photos. Note: In the exchange process, your defective exchange part must not show any mechanical damage, such as breakage, as these cannot be repaired. In such cases, a subsequent charge of €1,000 incl. VAT will apply. Attention: You are bidding on a Heidenhain UP 110 Inverter ID: 341 516-01 SN: 39716984F as part of an exchange service, professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per photos. For both repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as breakages, as these are irreparable. In this case, a subsequent invoice of €1,000 incl. VAT will be issued. Hodpjx Ht Egefx Agzeg

Condition: repair required (used), Year of construction: 1987, For sale is a small milling center of the brand Maho and type 300 C The power supply unit is defective but can be repaired Technical data: YEAR OF MANUFACTURE 1987 Type: MH 300 C CNC control Phillips 432 Table: 550x275 mm Travel x/y/z : 300/350/220 mm Hedpfx Asir U H Esgzeg SK 40 holder Spindle speed: 20-4000 rpm Main drive: 3.3 kw Rapid traverse: 3 m/min Quill stroke: 50 mm Dimensions: 2000 x 2000 x 2000 mm Weight: approx. 1900 kg Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: not functional, For sale is an injection molding machine of the brand Netstal and the type Synergy 1000-230 After a transportation accident, the control cabinet is completely defective. For this reason, the machine is offered as a spare parts carrier or for repair. Machine would be fully operational and in good condition Technical data: Operating pressure: 210bar, Injection force: 182kN, clamping force: 1000kN, Opening stroke: 0-400mm, mold installation height: 450-750mm Total weight: 7200 kg Operating hours: approx. 53,000 Hsdpsrfbnmjfx Agzeg Available from March 2024 First fillings with hydraulic oil can be ordered from us On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website