Used Defective for sale (1,078)

Condition: used, functionality: fully functional, This is a round filter coffee machine, a Bravilor Bonamat B20 HW. This coffee machine is ideally suited for supplying coffee in large establishments during peak times, such as care facilities, catering businesses, company canteens, etc. The B HW series is equipped with a separate hot water tap. The containers are easy to transport. The machine has undergone a major inspection in our in-house workshop and is fully functional. It has only been operated with a water softener, so there are no limescale residues in the system. The matching drip tray for dispensing coffee is not shown in the picture, but it is also included. The base cabinets shown in the picture are not included in the offer, but can be purchased as an option. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality brand-name equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional - or your money back Flexible choice of shipping or self-collection Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 seal Technical data: W x D x H: approx. 1173 x 600 x 947 mm Design with 1 brewing system and 2 containers Separate hot water tap With sight glass Coffee brewing unit Peak capacity: 40 liters Hourly output: approx. 90 liters Brewing time: approx. 14 min. / 20 liters Hot water unit Peak capacity: 4.6 liters Hourly output: approx. 20 liters Frequency: 50/60 Hz Voltage: 400 V 3 N Connection value: 11.2 kW Further details: 1 brewing column in the center 1 coffee container on the right and left, removable With hot water outlet: Coffee is kept warm in a container Audible signal at the end of brewing Pgjdpfx Aezbk Sxoqior With timer Digital display Total and daily counters Descaling system Stainless steel housing Fixed water connection Condition: Used, major inspection performed, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is made exclusively according to our general terms and conditions (GTC).

Condition: ready for operation (used), Year of construction: 2020, Wichelmann Drum Coater Potato Flour Coater Potato flour is conveyed into the drum via a spiral screw. Pedpfowb Ukajx Aqisgr The discharge conveyor has a shaking and trill function. The speed control knob is defective. The shaft has a dent and is bent. The shaft where two wheels are mounted to rotate the tumbler is bent.

Condition: repair required (used), Verbufa Portioner 3 Hamburger Molds Pjdpfxowg H H Rs Aqijgr Rectangular Adana Sticks Oval Kofte A frequency converter is defective

Condition: new, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2EG056013, overall weight: 120 kg, Equipment: documentation/manual, HEUFT PRIME complete product inspection system with DELTA-FWb rejection unit Manufacturer: HEUFT Systemtechnik GmbH We offer components of an industrial HEUFT system for automatic complete product inspection and defect rejection in filling and packaging lines. Base unit HEUFT PRIME complete product inspection system Type/Designation: HBBPRIXXX In-line inspection system for filled containers Modular system for quality control Depending on the equipment, inspection of fill level, closures, labels, and other quality features Automatic product tracking Connection of rejection systems for sorting out defective products Automatic height adjustment of the detection units for format changes Touchscreen/HEUFT-NaVi operating concept Manufacturer's stated performance: up to 72,000 containers/h* 2 x rejection unit/rejector Pgjdpfx Aozwmkzsqier HEUFT HBM100036 LI16 10.05 DELTA-FWb SPECTRUM Multi-segment rejection unit 16 segments Design: left For the automatic sorting out of detected defective containers Suitable for industrial filling, beverage, and packaging lines. The unit is new and unused; it was only unpacked for a completeness check.

Condition: new, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2EG050014, overall weight: 120 kg, height adjustment type: electric, Equipment: documentation/manual, HEUFT PRIME Full-product inspection / inspection system with DELTA-FWb rejection system Manufacturer: HEUFT Systemtechnik GmbH Components of an industrial HEUFT system for automatic full-product inspection and error rejection in filling or packaging lines are offered. Base unit HEUFT PRIME Full-product inspection Type/Designation: HBBPRIXXX Pgodpfx Aozwmg Noqier In-line inspection system for filled containers Modular system for quality control Depending on the available equipment, inspection of fill level, closure, labels, and other quality characteristics Automatic product tracking Connection of rejection systems for sorting out defective products Automatic height adjustment of the detection units for format changes Touchscreen / HEUFT-NaVi operating concept Manufacturer's stated series performance: up to 72,000 containers/h* Rejection system / Rejector HEUFT HBM100036 LI16 10.05 DELTA-FWb SPECTRUM Multi-segment rejection system 16 segments Design: left / Left For the automatic sorting out of detected defective containers Suitable for industrial filling, beverage, and packaging lines. The device is new and unused; it was only unpacked for a completeness check. An inspection can be arranged at any time by prior agreement.

Condition: good (used), Year of construction: 1983, machine/vehicle number: 8398714, functionality: fully functional, power: 18 kW (24.47 HP), Paul multi-blade saw in good, used condition. K2V800/370/310 – manufactured in 1983 with roller table, electrically powered Pgodpfx Aeziuxdeqier The multi-blade saw was used for many years to reliably produce moldings and is still connected to the power supply. The machine is being sold as part of the closure of our carpentry business. Includes 5 saw blades. Collection price – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement.

Condition: used, Electric Tow Tractor, Tugger Train Tractor STILL E-Tugger STILL Type R06 3-wheel tow tractor, electric tow machine Serial no. W4X126A00120 Year of manufacture: 2010 Towing capacity: max. 6000 kg Payload: 150 kg Front axle load: 420 kg Podpfev Uramsx Aqijgr Rear axle load: 600 kg Drive power: 3.2 kW / 60 min Battery voltage: 24 volts - 3-wheel tow tractor - Without towing coupling, mounting plate with Ø 14 mm holes, hole spacing 65 / 75 x 120 mm - Lighting system - 24-volt socket at rear - Equipped with 4 used traction batteries – functional – batteries, however, in poor condition - 3-wheel solid rubber tyres 4.00-8 / (3.00) Transport dimensions L x W x H: 1700 x 1000 x 1350 mm Unladen weight: 584 kg Battery weight: 467 kg (original battery defective) Four traction batteries provisionally installed – weight approx. 180 kg Total weight: approx. 770 kg In good condition

Condition: good (used), Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Pgodpfx Aqszw A A Teisr Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T

Condition: used, Radial Drilling Machine BERGONZI type UT 25 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 130 to 900 RPM Arm travel: 500 mm Max height table/spindle nose: 900 mm Column: Ø 180 mm 2 speeds motor Auto descent Return Spring defective Electric arm rise Delivered with: Pgjdpjzw Ax Iefx Aqier 1 cube Length 500 mm x Depth 400 mm x Height 450 mm 1 false table Lubricant pump Voltage: 380 V Length: 1500 mm Width: 900 mm Total height in height position: 2300 mm Weight: approx 1,2 T

Condition: used, mileage: 621,495 km, first registration: 04/2018, fuel type: diesel, axle configuration: 6x4, wheelbase: 46,000 mm, fuel: diesel, fuel tank capacity: 550 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro1, suspension: steel-air, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, crane, differential lock, electric window regulation, fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, trailer coupling, = Additional options and accessories = - Aluminum fuel tank - Heated exterior mirrors - Heated mirrors - Passenger seat Podpfx Aqey T Nb Doisgr - Differential lock - High beam - Speed limiter - Catalytic converter - Automatic climate control - Air suspension - Air-suspended seats - Radio/multimedia system - Rotating beacon - Seat heating - Auxiliary heater - Toolbox - Windshield - Xenon lighting = Notes = Internal inquiry number: 6-110 Volvo FH540 6x4 Epsilon Q150Z Short Timber Body Vehicle is available immediately! Vehicle: Volvo FH540 6x4 Chassis height: HIGH (formerly STD); for exact height measurements, please refer to VBI/WIS (dependent on tire size). Globetrotter safety cab, FH Wheelbase: 4600 mm Emissions according to Euro 6, with SCR, particulate filter, and exhaust gas recirculation Euro 6 compliant emissions Diesel engine 131, 551 HP/405 kW, 2652 Nm with exhaust brake pressure regulator (including engine control for I-Shift) I-Shift AT2612F, automated 12-speed transmission, max input torque: 2,600 Nm Body: Pavic short timber stanchion body with steel front wall 8x EXTE aluminum stakes Note regarding the loading crane: The crane's rack is defective and needs repair (slewing not possible!) Crane: Epsilon Q150Z 9.6 loading crane (Double extension), lifting moment 140 kNm 4 linear levers, 2 pedals Comfort package - Headlights ON/OFF - Engine START/STOP - Engine speed adjustment + - Horn - 1 additional free switch - Seat heating via weatherproof and removable cover - Electrical box with terminal strip mounted on the base frame - Special base frame with 4-point mounting incl. 2 additional brackets - Outrigger plates extended by 170 mm - Grapple saw controls via foot pedal Our sales team will be happy to answer any further questions. This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = General information Application: Forestry Technical information Number of cylinders: 6 Engine displacement: 12,777 cc Axle configuration Front axle: Steered; suspension: leaf spring Rear axle 1: Differential lock; suspension: air suspension Rear axle 2: Differential lock; suspension: air suspension Weights Kerb weight: 15,600 kg Payload: 10,400 kg Gross vehicle weight: 26,000 kg Functional Crane: Palfinger Epsilon Q150Z 9.6, mounted at the rear of the chassis

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, machine/vehicle number: ET.200.01.2025, overall weight: 134 kg, input voltage: 220 V, input current: 21 A, type of input current: AC, warranty duration: 24 months, Equipment: documentation/manual, Automatic Orbital Welding Machine METALSELF ET-200 + EC-120 Welding Head Ex-Demo (-40%) DESCRIPTION: MACHINE CONDITION: We offer for immediate delivery a Metalself orbital TIG welding system consisting of an ET-200 power source and an EC-120 closed-chamber welding head. The machine (manufactured in 2025) is in LIKE-NEW condition: it has never been used in production and was used exclusively as an internal demonstration unit. Due to its "Ex-Demo" status, the entire system is offered with an exceptional 40% discount on the list price. SYSTEM OVERVIEW: The system automates TIG welding on thin-walled pipes, performing a complete 360° rotation around the joint. It is the ultimate solution for industrial piping, fluid, food, and pharmaceutical systems, ensuring perfect repeatability, impeccable aesthetics, and weld beads free of defects. POWER SOURCE SPECIFICATIONS (ET-200): -Technology: Microprocessor-controlled inverter for millimeter-precise arc control. -Welding current: 5 ~ 200 A. Modes: Direct Current (DC) and Pulse, ideal for thermal control on stainless steel and titanium. -Interface: Intuitive touch screen with "Auto Prog" system that automatically generates parameters by entering only the pipe diameter and thickness. -Capacity to store 200 programs. Cooling: Integrated water circulation system. Quality Control: Integrated thermal printer on the machine and USB port for exporting welding reports. -Power supply: 220VAC ±10% - 50/60 Hz (Absorption 4.5 KVA). -Dimensions and Weight: 500 x 380 x 300 mm; 28 kg. WELDING HEAD SPECIFICATIONS (EC-120): -Type: Closed-chamber orbital welding head. -Operating diameter range: from Ø 19 mm to Ø 114.3 mm. -Maximum penetration thickness: ≤ 3 mm. -Shielding gas: Argon. -Cooling: Water-cooled. -Welding head dimensions: 540 x 195 x 54 mm. -Welding head weight: 6.5 kg. THE SUPPLY INCLUDES: -ET-200 power source and EC-120 welding head. -Dedicated trolley for easy and safe movement of the system in the workshop. -Power cables, control connections, ground clamp, and hydraulic/gas pipes. -CE Declaration of Conformity. Pgodjzw Uh Uspfx Aqijr -Complete user and maintenance manual (including parts list and programming instructions). SALES CONDITIONS: -Price: -40% compared to the new list price. -Delivery: Ex Works (EXW) at our premises in Settimo Torinese. -Availability: Immediate. The machine can be viewed at our facility and is available for any testing or practical demonstration.

Condition: like new (used), functionality: fully functional, This is a tray rack from the premium manufacturer Rational, suitable for the iCombi Pro/Classic combination steam ovens, size 20-2/1 GN. This tray rack comes from a training area and has 17 x 1/1 GN inserts with a rail spacing of 74mm and is in almost new condition. The recommended retail price (RRP) including VAT is: €3,184, our special price: €1,725 including VAT. You will receive an invoice with VAT shown separately. Service: We will be happy to assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational appliance model? Ask us, we have access to a wide range of used and new products. We will be happy to advise you on all appliance types. Our used equipment service for you: * 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. * High-quality branded equipment at fair prices. * Professional overhaul/inspection and expert cleaning. * Tested and fully functional - or your money back. * Flexible shipping or self-collection options. * Competent advice - before and after the purchase. * Provision of operating instructions, connection diagrams & spare parts. * Inspection according to DGUV V3. Technical data: * W x D x H: 772 x 1742 x 1013 mm * Clearance from the lowest insert to the oven opening: 118 mm * Clearance from the highest insert to the oven opening: 148 mm * Max. insert height: 1.60 m * 17 inserts * Max. load capacity: 180 kg * Max. load capacity per insert: 30 kg * Design with container locking mechanism * Can be loaded from both sides * Tip protection when pulling out the containers using U-rails * 4 tandem swivel casters (2 with parking brake - metal parts made of stainless steel) * Drainable and removable drip tray * Rail spacing 74 mm * Removable handle * Material: Stainless steel * Article number: 60.22.396 Capacity: * 2/1 GN baking and roasting trays 17 x * 2/1 GN grids 17 x * 2/1 GN 20 mm deep 17 x * 2/1 GN 40 mm deep 17 x Podpfxsy Aui Eo Aqisgr * 2/1 GN 65 mm deep 17 x * 2/1 GN 100 mm deep 8 x * H6-1/1 (up to 1,800g) chicken - superspike 12 x * H8-1/1 (up to 1,300g) chicken - superspike 12 x * Use of other containers: 2/4 GN, 1/1 GN Condition: used, fully functional Shipping: * Delivery or self-collection by arrangement * Worldwide shipping on request * Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to request a consultation, or would you like to view something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2021, operating hours: 4,500 h, Equipment: all wheel drive, soot filter, For sale: Caterpillar D6 LGP crawler with GPS 3D. I am offering a reliable and robust Caterpillar D6 LGP for sale. The machine is in very good technical and optical condition and is ready for immediate use. Technical data: * Model: Caterpillar D6 LGP * Operating hours: approx. 4500 * Undercarriage: well maintained, operational * Performance: powerful and efficient * Weight: approx. 20 tons (depending on equipment) Equipment: * Wide LGP undercarriage for low soil compaction * Comfortable cab with heating and air conditioning * Joystick control for precise work * Hydraulic system fully functional * Maintenance regularly performed Condition: The machine runs perfectly and has always been well maintained. No known technical defects. Ideally suited for earthmoving, dike construction, terrain profiling, and many other applications. Inspection & Transport: * Location: Bergkamen * Inspection possible by arrangement * Transport can be organized Psdszwbuuopfx Aqiegr

Year of construction: 2008, condition: good (used), ROTOFLEX VLI 330 Inspection – Slitting – Rewinding Machine Manufacturer: ROTOFLEX International Model: VLI 330 Year: 2008 Serial No.: VLI 3517 Working width class: 330 mm Electrical: 380 V / 50 Hz / 3 Phase Condition: Very good working condition Current status: Still in production Availability: Approx. 3 months, after installation of the owner's new finishing line BRAND-NEW INSPECTION TECHNOLOGY BST TubeScan – Installed / Replaced in 2025 The machine is equipped with a modern: BST TubeScan Digital Strobe 4000 Inspection System The complete camera / inspection system was replaced in 2025 and is therefore almost new. This represents a considerable added value compared to many older Rotoflex machines currently available on the used machinery market. The system allows the operator to monitor the printed web during production and supports reliable quality control of finished labels. MACHINE APPLICATION The Rotoflex VLI 330 is designed for professional finishing and inspection of label material. Typical applications include: · Inspection of printed labels Psdpfjzww Ikox Aqiegr · Slitting of master rolls into finished rolls · Rewinding · Removal and correction of defective material · Quality control · Preparation of finished rolls for delivery · Processing of pressure-sensitive label materials · Paper and film label applications

Condition: defective spare-parts repository (used), Year of construction: 2003, operating hours: 4,946 h, functionality: not functional, machine/vehicle number: 2406.03, turning diameter over cross slide: 150 mm, turning length: 625 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 4,000 rpm, total length: 1,650 mm, total width: 1,450 mm, total height: 1,700 mm, type of input current: three-phase, overall weight: 2,200 kg, spindle diameter: 320 mm, distance between centers: 750 mm, Universal lathe with cycle control from DMT - CD 322 - Turret defective and removed. Parameters were deleted for troubleshooting purposes. Pjdpfx Aozwpq Deqiogr

Condition: used, Year of construction: 2016, operating hours: 2,549 h, lifting height: 4,300 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Crown SCT 6020-1.3 electric forklift, battery: 06/2020, year of manufacture: 2016, hours: only 2,549 h, previous owner: German Armed Forces, rated load capacity: 1,300 kg, lift height: 4,300 mm, fork length: 1,200 mm, side shift, triplex mast with free lift, full cab with heating, including charger, STVZO lighting, rear window defective, ready for immediate use! On request, we will gladly provide you with a leasing or financing offer. Mr. Mihm (tel. ) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Pgedpfoyxkt Esx Aqijr Power steering, cabin = Further information = Lifting capacity: 1,300 kg Overall height: 200 cm Please contact Tobias Ebert for further information.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 26007/1, Year of construction: 2017, operating hours: 12,920 h, load capacity: 8,000 kg, lifting height: 5,600 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,010 mm, motor manufacturer: DEUTZ, gearing type: hydrostat, front tire type: cushion tires (black), rear tire type: cushion tires (black), empty load weight: 13,090 kg, Equipment: UVV, air conditioning, cabin, clamp, lighting, seat heater, sideshift, Triplex mast with full free lift, overall height: 3010 mm, lift height: 5600 mm, load capacity: 8000 kg at load center 600 mm, fork positioner with new side shifter, new fork tines length: 2000 mm, road lighting according to StVO, LED work lights front and rear, full cabin with heating, air conditioning, front and rear camera, DEUTZ engine, double pedal foot control, 6x new SE tires, operating manual included. Technical condition at the time of sale: Forklift is fully overhauled! Major maintenance just carried out! New UVV safety inspection completed without defects! Delivery: In perfect condition! 20 years of professional experience! INSPECTION AND TEST DRIVE: By appointment at any time during opening hours: Monday to Friday, 8:00 am - 6:00 pm. Saturday from 8:00 am - 1:00 pm. TRANSPORT: Low-loader or curtain side truck available at a reasonable price. Podsy Spmqopfx Aqiegr

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 26029/3, operating hours: 3,017 h, load capacity: 3,000 kg, lifting height: 5,130 mm, free lift: 1,620 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,320 mm, fork length: 1,600 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), Equipment: UVV, cabin, lighting, seat heater, sideshift, Equipment: Triplex mast with full free lift: 1620 mm, overall height: 2320 mm, lift height: 5130 mm, fork positioner with side shift integrated, fork length: 1600 mm, fully enclosed cabin with heating, road lighting according to STVZO, LED work lights front and rear, warning light, 80V/775Ah battery from 2018, integrated charger, SE tires, operating manual included. Technical condition at the time of sale: Forklift is technically overhauled! Major maintenance newly performed! UVV inspection passed without any defects! Delivery: In perfect condition! Pedpfx Aqezlunksiegr 20 years of professional experience! INSPECTION AND TEST DRIVE: Available by appointment during opening hours: Monday to Friday. From 8:00 AM to 6:00 PM. Saturday from 8:00 AM to 1:00 PM. TRANSPORT: Low-loader or covered truck available at a reasonable price.

Condition: used, Year of construction: 2009, machine/vehicle number: 113680, functionality: limited functionality, working width: 230 mm, spindle diameter: 40 mm, spindle speed (max.): 6,000 rpm, working height: 120 mm, TECHNICAL DETAILS Working width: 20–230 mm Working height: 8–120 mm Infeed table length: 1,950 mm Feed rate: 6–12 m/min Number of spindles: 5 Spindle diameter: 40 mm Spindle speed: 6,000 rpm Max. tool diameter vertical spindle: 232 mm Max. tool diameter horizontal spindle (except for the first spindle): 200 mm Spindle arrangement and power 1. Spindle, bottom: 5.5 kW 2. Spindle, left: 7.5 kW 3. Spindle, right: 7.5 kW 4. Spindle, top: 11 kW 5. Spindle, bottom: 5.5 kW Pgedszrmptepfx Aqior MACHINE DETAILS Connection voltage: 400 V Connection power: 32 kW Fuse rating: 64 A Dimensions & Weight Dimensions (L x W x H): 4,000 x 1,400 x 1,350 mm Weight: 2,500 kg EQUIPMENT 5-spindle version Four-sided machining Infeed table CE marking Note: The 5th spindle is defective.

Condition: used, Year of construction: 2014, fuel type: hybrid, Weights Empty weight: 14.660 kg Functional Mast: articulated arm Lifting capacity: 280 kg Working height: 2.797 cm Dimensions of cargo space: 730 x 249 x 263 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Damages: damaged vehicle (not roadworthy) Other information Delivery terms: EXW Max. horizontal reach: 1936 m Max swing of arm in degrees: 180 Max swing of platform in degrees: 360 Production country: UK Additional information Please contact Christian Theißen for more information Pgjdjzr D A Dspfx Aqier Manufacturer: Nifty Lift Model: HR28 Hybrid 4x4 Year of build: 2014 Condition: Used Data: Max. working height: 27,97 m Platform height: 25,97 m Max. reach: 19,36 m Drive type: Hybrid Total dimensions LxWxH: 9,26 x 2,49 x 2,63 m Length of transport position: 7,30 m Height transport position: 2,63 m Platform dimensions LxW: 2,40 x 0,91 m Max. basket load: 280 kg Swivel range: 360° Overhang: 0,50 m Movable up to working height: 27,97 m Max. gradeability: 45 % Wheel pressure (Support pressure): 0,111 kN/cm Ground clearance: 0,21 m Empty weight: 14.660 kg Special features: Drehbarer Arbeitskorb , Korbarm/vertikaler Drehwinkel 180°, Allradantrieb, Pendelachse, weiße Bereifung, integrierter Rußfilter. Information: various defects Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 2019, operating hours: 5,350 h, Technical Data – Kamag Wiesel WBH Euro 4 Vehicle • Manufacturer: Kamag • Model: Wiesel WBH 25E40 • Type: Hooklift truck • Emission standard: Euro 4 Weights • Permissible total weight: 36,000 kg • Max. payload: 17,000 kg • Unladen weight (standard): 19,000 kg Engine • Manufacturer: Mercedes-Benz • Type: OM 934 • Power: 170 kW (231 hp) • Displacement: 5.1 l • Max. torque: 900 Nm Transmission • Allison automatic transmission Axles / Tires • 4x2 • Front axle: Single tires • Rear axle: Dual tires • Tires: 295/60 R22.5 Braking System • Disc brakes, front • Drum brakes, rear • Two-circuit compressed air brake system • ABS Performance • Maximum speed: 40 km/h • Climbing ability (laden): 13 % Dimensions • Overall length: 8,960 mm • Overall width: 2,315 mm • Overall height: 2,480 mm • Wheelbase: 4,800 mm • Ground clearance, front: 180 mm • Ground clearance, rear: 2,000 mm Lifting System • Lifting height, unladen: 950–1,600 mm • Lifting height, laden: 180–480 mm • Lifting capacity: 17,000 kg Steering • Hydraulic front axle steering • Turning circle (inside): 4,600 mm • Turning circle (outside): 10,500 mm Hydraulics / Electrics • Hydraulic oil tank: 530 l Pjdpjztq Atefx Aqiogr • On-board voltage: 24 V • Starter batteries: 2 × 12 V / 180 Ah Equipment (extract) • Cab with heating and air conditioning • Air-suspended driver's seat • LED work lights • Rotating beacon • Radio with CD and Bluetooth • Electric mirrors • Rear view camera • ABS • Hydraulic container mount • Telescopic LED marker lights • Rear trailer coupling Optical condition is age-related 4 tires at the wear limit, rear view camera defective Approximate Current operating hour counter: 5350h Current mileage: 23955km No guarantee that this corresponds to the current condition

Condition: used, Year of construction: 2010, We are offering this used Flow Mach 4 4020b Dynamic XD waterjet cutting system, manufactured in 2010. Manufacturer: Flow Model: Mach 4 4020b Dynamic XD Year of manufacture: 2010 Condition: used Machine type: waterjet cutting system Flow Mach 4 4020b waterjet cutting system | 6,000 bar HyperJet | Dynamic XD | Service 01/2026 Description: For sale is a powerful and recently serviced precision waterjet cutting system from the world market leader FLOW, model Mach 4 4020b. The system is equipped with Flow's high-end technology (6,000 bar instead of the usual 3,800 bar) and features the Dynamic XD cutting head, which automatically compensates for angular errors and enables complex 3D cuts as well as bevel cuts. A special highlight for buyers: In January 2026, a comprehensive technical service was carried out by the manufacturer (Flow Europe GmbH). This included the installation of an official drive controller retrofit kit. Since original spare controllers for this year of manufacture are often no longer available, this upgrade offers long-term spare parts security and a modernized electronic control system. A test cut was successfully performed after the conversion. Technical data: • Manufacturer: Flow International Corporation • Model: Mach 4 4020b • Year of manufacture: 2010 (Service & electronics upgrade 01/2026) • Working area: approx. 4,000 mm x 2,000 mm • Cutting head: Dynamic XD (5-axis technology with angular error correction) • Abrasive system: Flow Paser 4 • High-pressure pump: Flow HyperJet 100 (94iD) • Max. operating pressure: 6,000 bar (87,000 PSI) • Pump power: 100 HP / 75 kW • Operating hours (pump): approx. 10,409 h • Control software: FlowMaster / FlowCUT 7.0 • Connection values: 400V, 50Hz, 3 phases (120A full load) Condition & equipment: • Technical condition: Very good, ready for immediate use. • Maintenance history: Current technical service report from the manufacturer is available (January 2026). • Upgrades: New drive controllers (retrofit kit) and refurbished wiring of the C-axis. • Productivity: The 6,000 bar technology enables cuts up to 50% faster compared to standard systems. Scope of delivery: Pjdpfx Aozwpfhoqijgr • Waterjet system Flow Mach 4 4020b • High-pressure pump HyperJet 100 • Control terminal including software • Technical acceptance protocol / service report from 01/2026 Location & inspection: 78549 Spaichingen (Germany) An inspection of the system under power is possible by prior arrangement from 15.09.2026. Sales & legal notes: The sale is exclusively in the B2B sector (commercial sale) with exclusion of any liability for defects, guarantee and warranty ("sold as is"). A return, exchange and further negotiations are excluded. All information, data and descriptions are provided to the best of our knowledge, but without guarantee of completeness, accuracy and topicality. The buyer is obliged to inspect the technical data, equipment features and the condition of the system on site before the purchase. Dismantling, loading and transport are carried out entirely by and at the expense of the buyer. If you have any questions or need more information, please send us a message or call us.

Condition: used, CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Psdpfxezwcl Uo Aqijgr Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Weight: approx 4 T

Condition: good (used), For sale: Robopac Robot S6 PDS – self-propelled wrapping robot (2017) Well-maintained Robopac Robot S6 PDS from 2017. This self-propelled pallet wrapper is ideal for efficient and professional pallet wrapping without requiring a fixed installation. Features: Year of manufacture: 2017 Fully self-propelled (flexible in use) Equipped with a powered film pre-stretch system, resulting in economical film consumption Includes a film cutting device (no manual cutting required after wrapping) Built-in battery charger (230 volts) Pgjdpfxeyxx Hyo Aqijr Wraps pallets up to 230 cm high. The machine is in good condition and functions properly. Batteries: The current batteries are new. Extras: Comes with an invoice. We can also supply wrapping film. For more information or a video of the wrapper, please feel free to contact us. Trade-in possible: Trade-in of a (defective) pallet wrapper is negotiable. Also, check out my other listings. Keywords: pallet wrapper, film wrapper, wrapping machine, pallet wrapping machine, wrap machine, robotic wrapper, wrapping robot, robot wrapper, wrapper, film wrapper.

Condition: used, Year of construction: 2002, For sale: Junget / Biesse Rover 24 L CNC milling machine / machining center. The machine is designed for professional processing of furniture panels, wooden components, plastics, and production components. It is suitable for carpentry workshops, companies producing furniture, kitchen elements, fronts, structural panels, PEHD components, and other parts requiring precise milling and drilling. The Biesse Rover 24 L is a robust CNC machining center equipped with a vacuum table, automatic tool changer, and a set of drilling spindles. The machine enables quick and repeatable performance of milling, vertical and horizontal drilling, and grooving operations. Technical specifications: Model: Junget / Biesse Rover 24 L Type: CNC milling machine / CNC machining center Machine dimensions: approx. 5.8 × 2.45 × 2.5 m Work table: vacuum X-axis travel: 4500 mm Y-axis travel: 1300 mm Z-axis travel: 180 mm Vacuum pump: 120 m³/h Control system: NC1000 Operating system: Windows XP Automatic tool changer: yes Vertical drilling spindles: 7 pcs Horizontal drilling spindles: 8 pcs Pjdpozf E E Hofx Aqijgr Circular saw: for making grooves / slots, e.g., in fronts or furniture components Safety features: safety grid / safety mat Tools installed in the machine: included Applications: The machine is particularly well-suited for the production of furniture, kitchen cabinets, fronts, carcasses, base panels, and components requiring serial drilling and milling. The drill array allows for the simultaneous execution of several holes, which speeds up production and ensures dimensional repeatability. The machine was mainly used for processing PEHD1000 plastic, which confirms its versatility and the ability to work not only with wood-based materials but also with engineering plastics. Technical condition: The machine has been used. According to information from the previous owner, the device is functional, starts up, and has no known defects or reservations. The equipment is sold as used and is subject to verification by the buyer upon collection. Key advantages: * robust industrial construction, * large working area, * vacuum table, * automatic tool changer, * vertical and horizontal drilling spindles, * circular saw for grooves and slots, * ability to process panels, wood, and plastics, * good machine for the production of furniture and serial components. The machine is suitable for continued operation in a production plant, carpentry workshop, or company engaged in CNC machining.