Universal milling machine Stanko 6R82G

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, grinding length: 630 mm, grinding diameter: 320 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. grinding length: 630 mm Hsdpfxeyvf S Ne Ab Uok Max. grinding diameter: 320 mm MACHINE DETAILS Manufacturer: TOS HOSTIVAR Model: BHU 32 Year of manufacture: 1987

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Vertical rectangular table: - usable surface: 740 x 200 mm - number of T-slots: 2 - width of T-slots: 12-H7 - distance between slots: 120 mm Fixed right-angle table: - usable surface: 700 x 250 mm - number of T-slots: 5 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 250 mm total Universal tilting table: - usable surface: 600 x 210 mm - number of T-slots: 4 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 350 mm total Adjustable in 3 planes, on either side: 30°-45°-30° Hodpfx Abjw Uc Npj Uek Spindle internal taper: - horizontal spindle head: ISO 30 (40) - vertical spindle head: ISO 30 (40) - universal rapid head: SV E20+ES20 Swivel in vertical plane: vertical spindle head: 360° Longitudinal travel, hand/automatic: 320/300 mm Vertical travel, hand/automatic: 375/355 mm Cross travel, adjustment handle: 150 mm Quill stroke: 60 mm Readout accuracy on micrometer verniers: 0.02 mm Main motor power/speed: 1.5 kW/1500 rpm Rapid feed motor power/speed: 0.45 kW/3000 rpm Coolant device motor power/speed: 0.15 kW/3000 rpm Spindle speed range: - 1st range: 58-375 rpm - 2nd range: 330-2000 rpm Feed rates (longitudinal or vertical): 12-400 mm/min - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical): 1200 mm/min All technical data is given without obligation and subject to errors or omissions.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, turning length: 1,500 mm, turning diameter: 500 mm, spindle speed (max.): 3,000 rpm, quill stroke: 150 mm, controller model: Siemens 802 C, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 500 mm Hsdpfeyuymfjx Ab Uok Turning diameter over cross slide: 280 mm Turning length: 1,500 mm X-axis travel: 295 mm Z-axis travel: 1,435 mm Spindle bore: 82 mm Spindle speed: 20 – 3,000 rpm Longitudinal feed: 5,000 mm/min Cross feed: 5,000 mm/min Rapid traverse longitudinal: 5 m/min Rapid traverse cross: 5 m/min Quill stroke: 150 mm Bed width: 350 mm MACHINE DETAILS Control: Siemens 802 C Main motor: 7.5 kW Dimensions & Weight Footprint: approx. 3.23 x 1.47 x 1.73 m Machine weight: approx. 3 t

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, feed rate X-axis: 25 m/min, workpiece height (max.): 180 mm, workpiece width (max.): 1,000 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Unit 1 Unit: Combined roller/pad Material: Rubber Unit 2 Unit: Vertical pad MACHINE DETAILS Motor power: 1.2 kW EQUIPMENT Hsdpjyttyvsfx Ab Ujk Working table with fixed height Working level Feed belt The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6385

Condition: used, Year of construction: 2002, turning diameter 820 mm turning length 2.000 mm control SIN 810 D center height over square guideway 400 mm turning diameter over slide rest 500 mm x-travel 540 mm z-travel 2.100 mm feed x/z-axis 0,01 - 50 mm/min rapid traverse X-axis 5,00 m/min rapid traverse Z-axis 10,00 m/min feeding force facing 12.500 N Hodpfx Asw Dvipeb Uok power feed longitudinal 20.000 N spindle turning speed range 6,4 - 1.600 U/min spindle turning speed - gearbox stage 1 6,40 - 376 1/min. spindle turning speed - gearbox stage 2 27,40 - 1.600 1/min. power capacity at 60% / 100 % load 46,00 / 37,00 KW max. torque at 60% / 100% load 5.073 / 4.069 Nm constant cutting rate 1 - 9.999 m/min. spindle head DIN 55027 - Size 11 spindle diameter in front bearing 170 mm spindle bore 128 mm tailstock quill taper MT 6 diameter of quill 125 mm quill stroke 280 mm thread pitch 0,1 - 400 mm total power requirement 35,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 6,00 x 3,00 x H2,60 m SIEMENS Sinumerik 810D mcontrol, chip-conveyor, tail stock, dust exhauster, 2 pc. steady rest. Machine can be inspected under power.

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, edge thickness (max.): 20 mm, controller model: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hot melt adhesive tank, pre-press for hot melt adhesive Edge bonding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sanding machine (1 motor) Unit 7: Belt sanding machine (1 motor) Hedpfx Abjyttrxo Uek Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed tracks: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ('as seen and approved') on the basis of photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination location. External reference: 6561

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, controller model: POWERCONTROL, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, feed rate X-axis: 80 m/min, TECHNICAL DETAILS Maximum panel width: 2,200 mm Maximum panel length: 4,300 mm Hjdpsyttqzofx Ab Ujk Maximum main saw blade projection: 125 mm Maximum feed speed: 80 m/min Saw Unit Maximum tool diameter: 450 mm Motor power: 13.5 kW Engraving Unit Maximum tool diameter: 180 mm Motor power: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Processing table Number of lift table levels: 4 Number of clamping devices: 10 The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External Reference: 5552

Condition: used, Year of construction: 1998, Technical details: internal diameter: 63 mm swing diameter: 320 - 800 mm grinding depth: 380 mm Hedou Ngciepfx Ab Ujk total power requirement: ca. 1,1 kW feed:: 0,05 - 0,40 mm/U / 8 step U/min weight approx.: 1060 kg dimension machine xH: 1,1 x 1,1 x 1,4 m Brake Drum Grinding Machine - turning Ø max./min.: 800 / 320mm - brake drum holder: 63mm, quill stroke 120mm - turning support: longitudinal travel 380mm; transverse travel 200mm - steel holder holder: 180 x 140mm, steel holder 58mm, turning tool for insert holder 20 x 20mm - operation via control panel *

Condition: not inspected (used), functionality: unexamined, power: 55 kW (74.78 HP), Year of construction: 2010, rotational speed (max.): 2,965 rpm, TECHNICAL DETAILS Engine speed: 2,965 rpm Maximum working pressure: 8.5 bar Air dryer Model: ABT 102 compressed air dryer Hjdpfx Aeyttk Isb Uek Max. working pressure: 21 bar MACHINE DETAILS Control model: HMI PLC KAESER Motor power: 55 kW Operating voltage: 400/460 V The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes full responsibility for the installation, securing, and use of the machine at the destination. External reference: 7548

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, power: 19 kW (25.83 HP), travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,730 mm, number of spindles: 20, number of tool stations in tool turret 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Hsdsyttf Sepfx Ab Uek Number of spindles for horizontal drilling (X-direction): 2 Number of spindles for horizontal drilling (Y-direction): 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, milling cutters, and aggregates are not included in the scope of delivery. Safety fences are supplied based on availability (left side only). The machine is sold and delivered in its actual and legal condition (‘as seen and approved’), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer is entitled to inspect the goods prior to collection, and assumes responsibility for installation, safety, and use of the machine at the destination. External reference: 6906

Condition: used, X Axis 30.0 in 762 mm Hodpeiypzdsfx Ab Uek Y Axis 16.0 in 406 mm Z Axis 16.0 in 406 mm Read for inspect Ready for delivery

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,550 mm, workpiece height (max.): 40 mm, number of spindles: 30, travel speed (max.): 80,000 mm/min, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Maximum workpiece height: 40 mm Number of suction traverse beams: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Hsdpsyttcwjfx Ab Uek Tool magazine 1 Number of slots: 18 Tool magazine 2 Number of slots: 10 EQUIPMENT NC positioning of suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for installation, securing, and usage of the machine at the destination. External reference: 7350

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,300 mm, number of spindles: 21, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 60 m/min Travel speed Z-axis: 25 m/min Number of suction traverses: 6 Spindles Number of spindles for vertical drilling: 15 Number of spindles for horizontal drilling in X-direction: 4 Number of spindles for horizontal drilling in Y-direction: 2 Total number of spindles: 21 Hedpfeytr Ryex Ab Ujk Milling unit Number of axes: 3 Max. spindle speed: 24,000 rpm Motor power: 9 kW Tool changer Number of tool positions: 10 MACHINE DETAILS Total power: 26 kW EQUIPMENT Vacuum pump WINDOWS control system WRT machine programming software Note: Cones and milling cutters are not included in the scope of delivery. Safety fences will be supplied subject to availability (right side missing). The machine is sold and delivered in its actual and legal condition ("as seen and agreed") based on photo documentation and technical/commercial documents for descriptive purposes. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8174

Condition: used, Technical details: turning diameter over bed: 560 mm turning diameter over support: 280 mm turning length: 2000 mm centre height: 280 mm centre distance: 1600 mm spindle bore of work spindle: 65 mm range of revolution per miute: 9...1800 / 24 step U/min longitudinal feeds:: 0,025-0,09 mm/U cross feed: 0,012-0,045 mm/U tailstock quill adjustment:: 225 mm tailstock taper MT: MK5 Hodpowa I Shefx Ab Uek total power requirement: 18 kW weight of the machine ca.: 3,8 t dimension machine xH: 3,7 x 1,6 x 2,05 m Three-jaw chuck D=320mm Top slide rotatable 45 degrees right and left *

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, power: 25 kW (33.99 HP), workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, Equipment: CE marking, TECHNICAL DETAILS Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 12 mm Maximum feed speed: 18 m/min Sequence of work steps: Section 1 Work step: Positioning Motor power: 2.5 kW Automatic control Edge preheater Glue tank Glue preheater Roll magazine Section 2 Work step: Cutting Number of motors: 2 Section 3 Work step: Edge milling Number of motors: 2 Motor power: 0.55 kW NC positioning Section 4 Hjdpfeytr Rgsx Ab Ujk Work step: Corner rounding Number of motors: 2 NC positioning Section 5 Work step: Milling Number of motors: 1 Motor power: 3.5 kW Section 6 Work step: Edge scraping Section 7 Work step: Glue scraping Section 8 Work step: Brushing Number of motors: 2 MACHINE DETAILS Total power: 25 kW EQUIPMENT Panel support guide Spraying unit Control with more than 20 control systems CE marking The machine is sold and delivered in its actual and legal condition ('as seen and agreed'), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216