Used Defect for sale (1,078)

Condition: defective spare-parts repository (used), Year of construction: 2000, machine/vehicle number: 2821, Offer 26218 Defective aerial work platform Technical data: - Working height up to approx. 12 m - Lifting height min / max. 10 m - Load capacity 450 kg Fgsdpfx Amo Ahxfvs Eei - Platform dimensions L 2300 x W 1400 mm - Extendable platform - 8 pcs drive batteries defective 6 V / 225 Ah - Space requirement approx. W 2800 x H 2700 x D 1700 mm - Weight approx. 3600 kg

Condition: defective spare-parts repository (used), Year of construction: 1978, functionality: not functional, ALZMETALL AB4HST Pillar Drilling Machine – Defective – Year of Manufacture 1978 For sale is an ALZMETALL AB4HST pillar drilling machine, year of manufacture 1978. The motor starts, but significant clicking noises occur during operation. The machine is therefore not ready for use and should be repaired before further use. The exact defect has not been investigated. The machine is therefore sold as a defective unit, as a project for hobbyists, or for spare parts. Technical data: Manufacturer: ALZMETALL Type: AB4HST Year of manufacture: 1978 Machine type: Pillar drilling machine Fodpfx Ae Afxuvjm Eegi Inspection possible by appointment Loading can be assisted Sale at the location 35708 Haiger No guarantee, warranty, or return Due to the defect, the machine is sold exclusively as requiring repair. Errors and prior sale excepted.

Condition: defective spare-parts repository (used), Year of construction: 2001, functionality: not functional, machine/vehicle number: 5251, Offer 22065 Defective milling machine with gearbox damage Fedpfxo Af Idqe Am Eegi Technical data: - Table size 950 x 450 mm - Working range of the axes: - X (longitudinal) 560 mm - Y (transverse) 320 mm - Z (vertical) 400 mm - Max. distance milling spindle – swivel table 510 mm - Tool holder SK 40 - Adjustable spindle speeds in 18 steps 25 - 2000 rpm - Drilling spindle stroke 100 mm - Feed rate of the axes up to 1200 mm/min - Rapid traverse - Drive 400 V / 3 kW - Space requirement approx. W 1200 x H 1650 x D 1000 mm - Weight approx. 1700 kg - Including: - 3-axis digital display - Coolant system - Fixed swivel table

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter Fgodpfx Amsygx Hns Esi - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Pago L400 high speed Labeling machine completed by Heuft Spectrum TX bottle inspector and Laser CO2 coding Videojet 3350 system Fsdpfxe Airm So Am Ejgi It is linear pressure-sensitive labeling machine manufactured by Fuji Seal / Pago, designed specifically for top-and-bottom labeling applications. Can be used for any form bottles. Robust linear system featuring ergonomic reel changing on the operator side. Common Use Cases: Widely utilized in pharmaceutical, cosmetic, and packaging industries for labeling boxes or flat/shaped products from above and below. Capacity Up to 400 products per minute or around 30,000 products per hour (bph), depending on the bottle configuration. TX bottle inspector - Non-contact, high-speed inspection of production containers (such as empty or filled glass bottles, cans, and pharmaceutical containers) and automatic rejection of defective items. Laser CO2 coding Videojet 3350 system - 30-watt industrial laser system designed for high-speed, permanent coding and marking on fast-moving production lines. Line speeds up to 900 m/min (or ~15 m/sec) and up to 2,000 characters per second for text, barcodes, and graphics YOM 2014 Excellent condition

Condition: defective spare-parts repository (used), functionality: not functional, Due to warehouse clearance and stock reduction, various machines are offered here as untested, defective, for refurbishment, or for parts. The machines are offered in their current condition at favorable prices. Please refrain from making unreasonable price offers. Briquette press / briquetting press / metal press Briquette press for compacting metal chips, wood chips, etc. No. 5 Manufacturer: COMAFER Type: Metapress 400 Briquette diameter approx. 70 mm Briquette length approx. 60-100 mm Motor power approx. 22 kW The machine comes from a batch of such presses. Another identical machine is still available. Fjdpfxez Efu Ss Am Ejgi The sale is expressly as defective, as a source of spare parts, or for rebuilding by hobbyists for export, etc. Various spare parts for this machine type are still in stock. If both machines are purchased as a package, the spare parts can be included. Condition: see pictures. (See pictures – a prior inspection is expressly desired; simply leave your phone number via email, and I will contact you to arrange an inspection appointment. Subject to prior sale.) All information without guarantee. The machines can be picked up by the buyer or shipped via freight forwarder at the buyer’s expense. Loading and/or packaging can be organized by us. The shipping costs are an estimate; depending on the distance and unloading possibilities, these may vary; please inquire. The stated selling price is the net price plus VAT. An invoice with VAT will be issued. Warranty basis: Due to age and wear, the sale is exclusively to commercial businesses without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: used, mileage: 174,540 km, power: 77 kW (104.69 HP), first registration: 07/2017, fuel type: diesel, next inspection (TÜV): 05/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, immobilizer system, soot filter, * 5,900 EUR NET * Transit Custom 2.0 TdCi L1H1, 9 seats, sliding door, ENGINE DEFECT, air conditioning, Euro 6 * 9 seats (3+3+3) * 6-speed * Armrest * Radio CD * Front airbags * Cruise control * Air conditioning * Start/Stop system * Multifunction steering wheel * On-board computer * USB * Electric windows * Electric mirrors * Sliding door on the right * Central locking * Tire pressure monitoring system * Isofix * ABS * ESP * Parking assistance system front + rear (PDC) * Fog lights * Wheelbase 293 cm Fedpfx Ajzbgk Dsm Ejgi * Unladen weight 1945 kg * Payload 1195 kg * Permissible total weight 3140 kg * Passenger car registration * Vehicle number: ????ENGINE DAMAGE - ENGINE DEFECT????? ????ENGINE BROKEN - ENGINE DEFECT????? ????ENGINE FAILURE???? OPENING HOURS Monday - Friday from 09:00 to 17:00 (by appointment...) CONTACT INFORMATION Phone: WhatsApp Email: Transfer and customs registration plates (export number) available from us. Subject to errors, typos and prior sale. Technical specifications and features are to be checked separately. The condition of the vehicle as per the contract is only that which is inspected on site at the time of purchase and confirmed in writing. Please arrange an appointment.

Condition: defective spare-parts repository (used), Year of construction: 1994, functionality: not functional, We are selling an industrial robot, type IRB 1500, with an S3 controller from ABB Robotics, manufactured in 07/1994. The unit is defective/not operational and displays the following error messages (see photos): - 506 Servo error 2 - 536 Motor overload error The robot can be moved slightly intermittently until the error messages reappear. We are selling the robot as a complete package, including the control cabinet, operator panel, and metal frame. Individual parts are not for sale. Fedszh Uvgjpfx Am Eogi Please note that we offer neither a guarantee nor a warranty. Returns after purchase are not possible. After the purchase, the robot can be collected by appointment during our business hours. If required, we will gladly assist with loading. Selling price: €3,250 (negotiable) plus VAT.

Condition: repair required (used), machine/vehicle number: 515054000261, Year of construction: 2003, load capacity: 1,500 kg, lifting height: 4,320 mm, free lift: 1,330 mm, fuel type: electric, battery voltage: 24 V, fork length: 1,000 mm, empty load weight: 2,221 kg, STILL RX50-15 electric three-wheel forklift for internal material handling, with a load capacity of 1,500 kg, a lifting height of 4,320 mm, and a STILL charger. IMPORTANT: BATTERY DEFECTIVE The 24V traction battery is defective or deeply discharged. The forklift is explicitly offered as requiring repair. Lifting and lowering under power cannot be demonstrated at this time. TECHNICAL DATA Manufacturer: STILL Model: RX50-15 Year of manufacture: 2003 Serial number: 515054000261 Load capacity: 1,500 kg according to the data plate Lifting height: 4,320 mm Free lift: 1,330 mm Fork length: 1,000 mm Unladen weight according to the data plate: 2,221 kg Fgsdpfxoz Hcrkj Am Eoi Drive power: 4.0 kW Battery voltage: 24 V; Battery type: PzS CONDITION AND MAINTENANCE In operation until June 2025, after which the battery failed. According to the latest condition report, the hydraulics and mast have no known functional defects; however, a current functional test is not possible due to the defective battery. Rear tires renewed in 2024; front wheels show signs of use. Oil and brake fluid were changed in 2024, according to the information provided; the driver's seat was replaced in 2021. DELIVERY AND COLLECTION Forklift including STILL charger, 24 V / 120 A. Location: 65618 Selters (Taunus), Germany. Inspection by appointment. On-site assistance is available for moving the forklift to the loading ramp and for loading. The buyer is responsible for organizing the transport. Price: 2,875 EUR net, negotiable, plus statutory VAT. Reference: RQ424391-10

Condition: repair required (used), Year of construction: 2025, functionality: limited functionality, machine/vehicle number: 24163 / 24191, Bakery Machines For sale as: used and partially damaged/contaminated – no warranty, no guarantees, sold as is, “as is, where is” Fgodpfo Afmqhjx Am Esi Depositor + accessories & topping applicator + cleaning cart Manufacturer: bmTEC Machine specifications: see downloadable PDF Condition: used/damaged, in operation from early 2025 to early 2026 Damage to the “Depositor”: Only the “Depositor” is mechanically damaged. During loading, the “Depositor” tipped over to the side and fell to the floor. The frame of the “Depositor” is bent. The gap dimensions vary considerably. Inside, residues from rodents and dirt are visible due to storage. In the area of the product inlet, a compression of the frame can be seen. One of the conveyor belts shows no tension. Inside one of the installed control cabinets, a plastic cover and a screw are lying loose. The “Topping Applicator”, which is controlled via the “Depositor” and the control cabinet installed there, shows no visible defects other than the usual signs of wear. However, soiling is also visible here. No visible irregularities can be seen on the sheets belonging to the machine and on the cleaning cart. Sales basis: loaded onto a truck at the location 83562 Rechtmehring

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16212-51, turning length: 1,300 mm, turning diameter: 400 mm, spindle motor power: 68 W, total height: 2,900 mm, total length: 6,391 mm, total width: 2,495 mm, overall weight: 12,000 kg, Equipment: documentation/manual, For sale is a CNC lathe, GF Georg Fischer lathe FMS NDL-40/130, with Siemens 840D control, including 2 additional chucks. Max. workpiece diameter: 400 mm Max. workpiece length: 1300 mm Selling price ex works Condition: Good condition, the machine is powered and can be tested. Upon request, I can also send a current video demonstrating the most important functions. Important terms of sale (B2B only): The sale is exclusively to commercial enterprises. By submitting a bid or making a purchase, you confirm that you are acting as an entrepreneur within the meaning of § 14 BGB. Exclusion of liability: The sale is made with the exclusion of any liability for defects in materials and workmanship. Warranty: No warranty or guarantee is provided. Returns: No returns or exchanges are permitted. Fgodpfs Agrhdox Am Eoi Liability for damages resulting from injury to health, body, or life, as well as from gross negligence and/or intentional breaches of my obligations as a seller, remains unlimited. Permitted delivery area (EU internal market only) The sale and transfer of ownership of this machine are exclusively to commercial buyers with a registered office and delivery address within the European Union (EU). A sale to third countries (e.g., Switzerland, the United Kingdom, the USA) is excluded. A valid VAT identification number (VAT ID) must be provided for invoicing.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 700 mm, table width: 6,000 mm, OPTIMIZING AND DEFECTING CROSS-CUTTING LINE CURSAL MOD. TRV 2000E 700 SX Line configuration: - Motorized roller conveyor 6000 x 760 mm - Chain feeder with singulator (buffer magazine) for boards from 4500 mm up to 6000 mm, capacity 6 boards Fgjdpfx Amjywdx Sj Eji - Optimizing and defecting cross-cutting saw Cursal mod. TRV 2000 E 700 SX - Roller feed system - Blade diameter 700 mm - Max feed speed 150 m/min - Cutting section 480 x 65 mm - Cutting section 530 x 30 mm - With chalk defect marking system - Year 2015 - Outfeed conveyor belt 5000 x 600 mm - Bilateral overhead ejector - N. 2 transfer conveyors for semi-finished parts (1 right + 1 left) - N. 2 accumulation roller conveyors (1 right + 1 left)

Condition: used, mileage: 89,682 km, power: 66 kW (89.73 HP), first registration: 10/2020, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 02/2027, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, soot filter, The vehicle has sustained front-end damage, the airbags have deployed, and the engine is defective. Special equipment: Equipment package: Comfort Package Plus, grab handles on the A-pillars, seat cover/upholstery: fabric "Bricks", seats in the cab: driver's seat with height adjustment, seats in the cab: lumbar support for the driver's seat, interior lights in the cab: reading light in the front, illuminated glove compartment, sun visors with mirror, waste container, vehicle without child safety lock in the cargo/passenger compartment, paintwork: metallic paint, cargo area partition, high version without window, truck registration, "Transporter" lettering on the fender, seats in the cab: passenger double seat with storage compartment (lockable) in the seat box, interior paneling in the cargo/passenger compartment: hard fiber, halfway up, lashing eyes reinforced. Fodo Aiza Tjpfx Am Esgi Additional equipment: Passenger airbag can be deactivated, airbag on driver/passenger side, anti-slip regulation (ASR), exterior mirrors electrically adjustable and heated, exterior mirror, convex, left, exterior mirror, convex, right, floor covering in the cab: rubber, onboard tools, driver assistance system: multi-collision brake, windshield laminated glass, remote key (2) foldable, glove compartment lockable, tailgate without glazing, interior lights in the cargo/passenger compartment: LED, interior filter: pollen filter, body/superstructure: standard van, body variant: normal roof, fuel tank: 70 liters, radiator grille with chrome strips, steering column (steering wheel) adjustable, engine 2.0 liters - 66 kW TDI, rear fog lamp, non-smoker package, digital radio reception (DAB+), wheelbase 3000 mm, tire repair kit, low emissions according to exhaust standard Euro 6d-TEMP, sliding door cargo/passenger compartment, right, steel rims 6.5x16, start/stop system engine, warning system for seat belt (driver side), heat-insulating glazing, permissible total weight 2.80 t.

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Serial No. 1257G, Year of manufacture 1991 Pressing force 80 tons Working length 1300 mm Stroke 260 mm with Cybelec DNC 94 PS control system with back gauge Own weight 8800 kg without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are likely lost. Weight 7300 kg (on the nameplate) Weight 8800 kg (weighed on the crane) Fgjdez A Ia Sspfx Am Eji in good condition

Year of construction: 1985, condition: repair required (used), Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier Fodsi Huvhspfx Am Eegi -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg

Condition: used, mileage: 538,734 km, power: 265 kW (360.30 HP), first registration: 07/2007, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x4, wheelbase: 4,900 mm, fuel: diesel, gearing type: automatic, emission class: euro4, suspension: steel, total length: 9,270 mm, total width: 2,500 mm, Equipment: ABS, AdBlue, = Additional options and accessories = - 6x4 - Aluminum fuel tank = Further information = Front axle: Tire size: 385/65R22.5; Steerable; Tire tread depth left: 25%; Tire tread depth right: 25%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/80R22.5; Dual tires; Tire tread depth left inside: 25%; Tire tread depth left outside: 25%; Tire tread depth right inside: 25%; Tire tread depth right outside: 25% Rear axle 2: Tire size: 315/80R22.5; Dual tires; Tire tread depth left inside: 25%; Tire tread depth left outside: 25%; Tire tread depth right inside: 25%; Tire tread depth right outside: 25% Unladen weight: 9,206 kg Fjdpj Ahn Rcofx Am Eogi Payload: 16,794 kg GVWR: 26,000 kg Damage: none

Condition: repair required (used), Year of construction: 1965, functionality: unexamined, -1- used, repair-needed generator set FIMAG on a single-axle trailer. Output: 50 kVA, offered in its current condition. Does not start, tires are defective. Fjdpfx Amjy Au Syo Esgi

Year of construction: 2017, condition: used, functionality: fully functional, This is a VarioCooking Center VCC 211 from the premium manufacturer Rational, in a Dynamic version with reduced power consumption – save energy! A new inspection has been carried out in our in-house workshop, and the unit is fully functional. Accessories can be purchased upon request. RRP VCC 211: €17,600 net You will receive an invoice with VAT shown. Service: We will gladly connect you with a certified Rational customer service throughout Germany. Are you looking for a specific Rational device type? Ask us; we have access to an extensive range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Checked and fully functional – or your money back. Flexible shipping or self-collection options. Competent advice – before and after the purchase. Provision of operating instructions, connection diagrams and spare parts. Inspection according to DGUV V3. The VarioCooking Center MULTIFICIENCY® combines the functions of conventional cooking appliances such as a stove, grill plate, fryer, tilter and pot in one. In addition, the Plus version has a pressure mode. This offers you the possibilities of cooking, frying and deep-frying in a confined space, without supervision, with perfect cooking results. Technical data: W x D x H: approx. 1164 x 914 x 1100 mm Power connection: V: 400 / kW: 24 / Hz: 50 Dynamic version Weight: approx. 223 kg Serial number: E21VI17068028812 Year of manufacture: 2017 Condition: used, new inspection carried out, fully functional Further details: Core temperature sensor Freestanding unit with height-adjustable feet VarioDose - Integrated water inlet Integrated water drain AutoLift lifting and lowering system Burn protection Non-heated side walls VarioBoost® - Heating system = 200 °C in 2.5 minutes Integrated hose shower For 100 - 300 meals Usable capacity 100 liters Subject to changes and errors Shipping: Fedo Aid Dyspfx Am Eogi Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to request advice or would you like to view something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is made exclusively according to our general terms and conditions (GTC).

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Offer 25514 Technical data: - max. working length 3060 mm - distance between uprights 2690 mm - max. pressing force 1300 kN - max. distance table / ram 370 mm - upright overhang 410 mm Fjdpfx Amex Ew Dqj Ejgi - ram stroke 215 mm - stroke speeds - downward speed, no load max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to 11 mm/sec - total drive power 18 kW - pneumatic connection 6 bar - space requirement approx. W 3800 x H 2400 x D 2400 mm - weight approx. 11500 kg - includes: - with 6-axis CNC control DELEM - two-hand control panel with foot switch - crowning device - controlled back gauge with height adjustment 5 - 860 mm - hydraulic upper and lower tool clamping - die table movement pneumatically assisted - Machine does not reference because 2 axes on the right side of the back gauge are not functioning; control module may be defective.

Condition: defective spare-parts repository (used), Year of construction: 2004, machine/vehicle number: A II 151768, Offer 25979 Defective screw compressor - compact unit - Operating hours: 16550 h - Operating pressure: 10 bar - Delivery rate: 15.9 l/s - Drive: 400 V / 7.5 kW - Motor speed: 3000 rpm Fgodpfx Amowrcq Ne Eei - Air tank: 250 L - Space requirement: approx. W 700 x H 1830 x D 1050 mm - Weight: approx. 250 kg

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Fgedozizkyepfx Am Eji Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, mileage: 22,000 km, power: 162 kW (220.26 HP), first registration: 10/2002, overall weight: 14,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 02/2027, gearing type: mechanical, emission class: euro3, loading space width: 2,460 mm, loading space length: 4,000 mm, loading space height: 2,500 mm, Year of construction: 2002, total length: 8,400 mm, total width: 2,500 mm, total height: 3,450 mm, Equipment: ABS, all wheel drive, First owner. 22,000 total kilometers with original inspection certificate. First owner: Voluntary German fire department. Always registered until November 2026. Euro 3 diesel engine, MAN inline six-cylinder, 6871 ccm. 6-speed manual transmission. 96 km/h. All-wheel drive with 2 differential locks (front and rear). ABS. Fire engine LF 16/12 with modern body. Year of manufacture 2002. Integrated ambient lighting. Wide crew cab METZ-AS (combined steel and aluminum construction, Metz-FGL, now Rosenbauer). 9 seats. Hydraulically tilting spacious cab with 4 doors. 1900 liter water tank. With electric tank heater. Rear pump Rosenbauer FP 16/8 (only 118 operating hours). TS extension with 220 kg load capacity on the front right, further storage and pull-out units according to standard, quick-attack system with dimensionally stable hose. Fodj Aix Tcepfx Am Eegi Traffic warning system Boese TriBlitz 3 (can be switched on directly by the driver). Light mast GEROH with 2 spotlights, mounted between cab and crew cab. Small ball-type trailer hitch with 2000 kg trailer load (braked) or 1500 kg (unbraked). Connections for 12 V and 24 V. Robust chassis with full leaf spring suspension and approximately 3.85 m wheelbase. A parking heater was previously installed, but it has been removed. The WEBASTO sticker is still on the vehicle. Retractable hose reels from ZIEGLER, both included in the offer, with hose material. Total vehicle length with the 2 reels = 8400 mm. Vehicle overall external dimensions (dimensions without reels!): Length 7.70 m / Width 2.50 m / Height 3.45 m. Unladen weight: 8395 kg. Permissible total weight: 14000 kg. The pure box/fire engine body has the external dimensions approximately 4.00 m long / 2.46 m wide / 2.50 m high. Complete special signaling system with roof beacon and front flashers, operational, can remain for emergency services. The registration type is currently "Other motor vehicle, fire engine LF 16/12". This fire engine has valid inspections. TÜV (technical inspection) until 02/2027 and SP (gas inspection) until 02/2028. Both inspections were carried out "without any defects found" and recently (the gas inspection was performed at 21,813 km). Original EC declarations of conformity are available for the body (Metz-FGL) and the light mast (GEROH). 2 original MAN keys are included, suitable for all doors. A radio, original MAN, is also installed. The diesel tank holds 125 liters. This fire engine was driven to us without any problems on the highway for a good 400 km in November 2026. The MAN is immediately available. This offer is only valid for commercial businesses and freelancers, as well as for authorities/emergency services of all kinds. Sale to private end consumers is unfortunately not possible. Subject to prior sale and errors. The purchase price is the final price, gross = net, without separate VAT (sale according to §25a UStG / so-called differential taxation).

Condition: used, CNC universal tool milling machine DECKEL, type FP 4 ME - DEFECTIVE Machine No. 2205, Year of manufacture 1989 CNC path control: GRUNDIG Contur 3 - Control system does not boot up Travel ranges: X: 485 mm, Y: 385 mm, Z: 380 mm Table size: 800 x 460 mm Spindle mount: ISO 40 Spindle speed: 63 - 3150 rpm, 22 steps Feed rate range: 2 - 3000 mm/min, stepless Quill movement: Horizontal and Vertical Main spindle drive: 3.7 / 4.4 kW - Hydraulic tool clamping - Swiveling control panel - Electronic handwheel - Fixed angular table - Coolant system in the machine base - Control cabinet located next to the machine, dimensions L x W x H: 800 x 750 x 1150 mm Space requirement L x W x H: 2000 x 2000 x 2000 mm Fgodpfxoz Ebvre Am Eoi Weight approx.: 2400 kg Good condition - control system does not boot up.

Condition: used, empty load weight: 6,100 kg, maximum load weight: 11,900 kg, overall weight: 18,000 kg, first registration: 05/2014, total width: 2,550 mm, Equipment: ABS, EBS, cooling unit, Key Features Internal Reference: 25493M Chassis Number: AH1 814 870 8143 77 Serial Number: 313.453.923 Vehicle Model: AH18 Carrier Supra 950 TK Vehicle Make: FABAG Product Category: Refrigerated Trailer Condition: Used Date of First Registration: 05/15/2014 Last Inspection (MOT/TÜV): 04/30/2025 Suspension: Air-Air Fgodpez Hrl Hofx Am Eoi Cab Vehicle Equipment: ABS, EBS Axles & Tires Axle Configuration: - Axle 1: 385/55 R22.5, Disc brakes, Air suspension Axle 2: 385/55 R22.5, Disc brakes, Air suspension Number of Axles: 2 Weights & Dimensions Gross Vehicle Weight (GVW): 18000 Payload: 11900 Unladen Weight: 6100 Vehicle Width: 2550 Body Body Manufacturer: Fabag Body Year of Manufacture: 2014 Refrigeration Unit Refrigeration Unit Make: Carrier Zones: 2-zone Suitable for Frozen Goods: Yes Refrigeration Unit Year: 2014

Condition: used, Year of construction: 1959, functionality: fully functional, machine/vehicle number: 6402/2, overall weight: 31,500 kg, For sale is a LASCO KH125 from company stock. This forging hammer features a Siemens PLC control system. The operating panel and associated control cabinets are included. Technical specifications: • Year of construction 1959 according to the electrical diagram, machine number 6402/2 • Order number 1465 (5328) • Impact energy 12.5 kJ, ram weight 1,250 kg • Impact rate up to 110/min, main motor 22 kW • Total weight approximately 31.5 tons Fgedj Aia T Tjpfx Am Esi Technical documentation and electrical diagram are available. Condition and inspection The machine is functional and can be demonstrated under power by arrangement. To the seller’s knowledge, no defects are known. Availability and collection Available immediately. The buyer is responsible for disassembly, loading, and transport. The exact scope of supply and the collection date will be agreed upon.