Used Defect for sale (1,010)

Condition: repair required (used), Year of construction: 2011, operating hours: 29,898 h, The machine features an extended column, providing a greater Z-axis travel distance compared to others. It is also equipped with a fully controlled 4th axis from Nikken and an external chip conveyor. The machines have mainly been operated in single-shift mode. 99% of the machining involved aluminum and other non-ferrous metals, ensuring that accuracy remains excellent. Only the spindle now has a bearing defect. • Travels (X, Y, Z): (920, 510, 460mm) • Through-spindle coolant 15 bar • Spindle speed: 14,000 rpm • Raised column for increased Z-axis travel Gjdpfxsx Swmxj Ag Tjtt • 4th axis • Table size: approx. 510 × 1170 mm • Machine weight: approx. 6,800 kg • SK40 DIN tool holders • 30-position tool magazine • Professional P control unit (FANUC) • Network connectivity • Rapid traverse: 36 m/min

Condition: used, Year of construction: 2019, operating hours: 4,240 h, 2019 | Isoli PNT220NLX on Nissan NT400 | Used Truck-Mounted Boom Lift | 4240 hours | 53375 kms 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 34000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 62 inspection points 57 approved ✅ 3 imperfect ℹ️ 2 issues ⚠️ Gtedpfxex Twahj Ag Tot 📌 Inspector's Comment: Car defects: 1. Chassis and body rusted. 2. Headlight does not light, rear turn signal does not light. 2. Engine check engine light was on, but fixed, likely ADD blue system failure. (error extinguished for now) 3. Hydraulic tank bent. 4. Hydraulic control devices without marking. 5. Seat torn. 6. Interior dirty. 7. Body parts on the driver's side are of different colors. 8. Safety triangle and first aid kit missing. 9. Entry point heavily scuffed and rusted. 10. Mandatory technical lifting equipment and vehicle inspections are valid. 11. There is a technical maintenance and operation manual. 12. No obvious major faults are visible, except for those listed. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39451 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2013, condition: refurbished (used), functionality: fully functional, This is an SCC 61 combi steamer from the premium manufacturer Rational, electric version. This combi steamer is equipped with a hanging rack for 6 shelves. The unit has been fully overhauled in our in-house workshop and is in full working order. It is offered with a 6-month warranty on all electrical parts. The base stand pictured is not included in the offer, but can be purchased optionally. An invoice with VAT shown separately will be provided. Service: We are happy to assist in arranging a certified Rational service partner. Are you looking for a specific Rational device type? Contact us—we have access to a wide range of used and new equipment. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our used equipment service for you: - 6 months warranty on electrical parts, limited to replacement of defective parts, excluding installation/removal costs - High-quality branded equipment at fair prices - Professional refurbishment/inspection & expert cleaning - Tested & fully functional—or your money back - Flexible shipping or collection options - Competent advice—before and after purchase - Provision of user manuals, wiring diagrams & spare parts - Electrical safety check according to DGUV V3 This combi steamer provides space for 6 x 1/1 GN containers. In automatic mode, the unit independently detects the ideal cooking path for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing), as well as the size of the food, loading quantity, and product-specific requirements. Technical data: - Dimensions (W x D x H): approx. 847 x 776 x 782 mm - Power supply: V: 400 / kW: 11.0 / Hz: 50/60 - Capacity: 6x 1/1 GN - Weight: approx. 103 kg - Serial number: E61SH13042345756 - Year of manufacture: 2013 Condition: used, fully functional Further information: - With careControl - self-cleaning system - In combi-steamer mode, three operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C) - Core temperature probe - Handshower with automatic retract - 8.5" color display and touchscreen - 5 programmable fan speeds - Integrated, maintenance-free fat separator - Automatic start time preselection - 7 cleaning levels for unattended cleaning—including overnight - Steam injection adjustable in 3 levels—from 30°C to 260°C Gjdpfxex S Epnj Ag Tett - 5 programmable proofing stages - USB interface - Seamless, basin-shaped hygienic cooking chamber with rounded corners - Halogen cooking chamber lighting Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by arrangement Subject to changes and errors. If you have any questions, require advice, or would like to view the equipment locally, you can reach us by phone during our business hours: Monday–Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is carried out exclusively under our general terms and conditions (GTC).

Condition: used, Year of construction: 2000, centre distance 1000 mm grinding length 1000 mm centre height 300 mm Control Siemens 840 800 kg weight of the machine ca. 6,7 t Gtodpfx Aevy Im Hsg Tjt The machine is being sold as defective / for parts! Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: as good as new (ex-display), Year of construction: 2024, Machine is in the exhibition and was only used for demonstration purposes. Optiturn S400 HSC CNC Premium CNC lathe direct from the manufacturer. S400 HSC - The OPTIMUM Premium CNC milling machine with Siemens control SINUMERIK 828D is characterized by performance, speed, precision and long service life. Heavy-duty design - Compact design - .SIEMENS servomotors in all axes - Renishaw measuring arm for tool measurement - All servomotors with integrated encoder for maximum accuracy - Main spindle designed as motor spindle - 45° inclined bed design for particularly large machining diameters and unhindered chip flow into the chip flow into the chip tray - Hydraulic three-jaw lathe chuck Ø 170 mm with soft jaws - Servo tool changer VDI 30 with 12 tool positions - Hardened and precision-ground ball screws for high rapid traverse speeds in all axes axes - Faster tool change speed - High hydraulic clamping force - Heavy-duty cutting without vibration, to realize machining automation and high efficiency in extreme cases - Dimensionally stable linear guides ensure a long service life thanks to maximum static and dynamic rigidity rigidity - Device for manual tool measurement - Heat exchanger - Portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs. programs considerably - Belt-type chip conveyor ensures efficient chip removal - Work light for complete illumination of the work area - Coolant device with cleaning gun - RJ45 and power interface - EMC (electromagnetic compatibility) - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus see "Additional package SIEMENS OSS Plus" on page 117 - 1 year maintenance contract Basic included Machine data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 25 kVA Spindle Drive motor S1 operation 11.6 kW Torque drive motor S1 operation 65 Nm Drive motor S6-30% operation 14.4 kW Torque drive motor S6-30% operation 81 Nm Spindle holder A2-5 Spindle bore Ø 56 mm Chuck opening Ø 45 mm Hydraulic lathe chuck Ø 170 mm Coolant system Coolant pump power 700 W Tank capacity 160 liters Hydraulic system Hydraulic pump output 1.5 kW Tank capacity 36 liters Machine data Turning Ø max. 220 mm Turning length 320 mm Rotation Ø over cross slide 300 mm Rotation Ø over machine bed 500 mm Inclined bed 45° Speed range Spindle speeds* 30 - 6,000 min-1 Godsw Ebn Hspfx Ag Tett Tool changer Type Servo VDI 30 Number of tool positions 12 Accuracy Repeat accuracy ± 0.004 mm Positioning accuracy ± 0.004 mm Travel distance X-axis 180 mm Z-axis 350 mm Feed force Dynamic X-axis 3.6 kN Z-axis 3.6 kN Feed speed X-axis / Z-axis 30 m/min. Motor torque X-axis / Z-axis 6 Nm Dimensions Length x width x height 2,000 x 2,250 x 1,550 mm Total weight 2,600 kg

Condition: new, carrying capacity 250 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-250 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller Gsdjnlb Rwspfx Ag Tott formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,186 h, Control Unit Brand HEIDENHAIN Main Drive Gsdex Sz Duopfx Ag Tstt Number of axis 5 Tool taper SK 40 This 5-axis DMG DMU 100 T was manufactured in 2002. It features a Heidenhain control system and a SK40 taper. Note that the pneumatic cylinder of one of the two tool changers is defective and needs replacement. Consider the opportunity to buy this DMG DMU 100 T vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Multi-spindle drilling machine -4 motors (1 motor defective) -pneumatically exciting -Drilling depth approx. 30 mm -Max. drilling distance: 1000 mm -Drive: 0.36 kW 2800 rpm Godpfjb A Iy Tox Ag Tjtt -Weight: 280 kg

Condition: used, maximum load weight: 13,580 kg, overall weight: 16,000 kg, first registration: 01/2013, loading space length: 7,280 mm, loading space width: 2,480 mm, total width: 2,550 mm, Year of construction: 2013, Wagon No. G0113391_1 – Manufacturer: Krone. * Simple corner fittings * Fixed support legs * Lashing recesses * Lashing options Availability: IMMEDIATELY. Technically operational condition without further repairs required. Subframe shows signs of wear and partial rust formation. Isolated paint flaking on parts of the swap body. Occasional rust on swap body components. Deformations/impacts on certain components—see pictures. Swap container is in defective condition (see pictures). Gtjdpsx Rxkvefx Ag Tst Dimensions are approximate. Offer is subject to prior sale; prices are net ex-works D-59302 Oelde. Further details available upon request by phone or email.

Condition: used, Year of construction: 2014, Make: HANDTMANN, Model: HBZ Trunnion 80, Year of manufacture: 2014, Serial No. 200793, Control unit by Heidenhain, Type TNC640, Travel distances X/Y/Z: 850 x 850 x 700 mm, A-axis max. -30/+120°, C-axis 360°, Tool holder: HSK 63A, Max. workpiece size: Ø 850 x 630 mm, Max. workpiece weight: 1,200 kg, 40-position tool changer, NC rotary/swivel table, Table diameter: 800 mm, Maximum spindle speed: 30,000 rpm, Chip conveyor by Knoll, Model 600K-3, Band filter system by Knoll, Electrical cabinet by Knoll, Control defective, Travel paths: 850 x 850 x 700 mm This machine is part of an online auction. Gtedpfx Aex A U Ulsg Tst Images will be provided later.

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition. Optimill F 110 HSC Premium CNC milling machine direct from the manufacturer. F 110 HSC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and a long service life. - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profiled rail with recirculating ball bearing for high rapid traverse speeds in all axes - High-torque servo drives in all three axes - Telescopic guideway cover on all three axes - Automatic lubrication - Massive, exact milling table with three T-slots, large dimensions and precision-ground - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to the run-in of programs considerably - Coolant device with chip flushing system and cleaning gun - Chip conveyor in belt design ensures efficient chip removal - Chip trolley - RJ45 plug connection and 230 V power connection - Closed switch cabinet with integrated heat exchanger ensures optimum temperature and prevents the ingress of dirt particles - Machine light in the work area - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus - 1-year Basic maintenance contract included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected load 15 kVA Milling spindle Drive motor S1 operation 9 kW Torque drive motor S1 operation 57 Nm Drive motor S6-30% operation 21.2 kw Torque drive motor S6-30% operation 135 Nm Spindle holder SK 40 / DIN 69871 Internal spindle cooling option Drive motor S1 operation 10.5 kW Torque drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque drive motor S6-30% operation 125 Nm Cooling lubricant system Power of the coolant pumps, 2 pieces 900 W Delivery rate max. 35 l/min. Tank capacity 116 liters Cleaning pump Power of the cleaning pump 530 W Milling accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Double arm gripper type Number of tool positions 20 Tool diameter max. 78 mm Tool diameter (secondary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time tool change: tool to tool 2.5 seconds Travel distance X-axis 650 mm Y-axis 400 mm Z-axis 500 mm Feed drive Rapid traverse X-, Y-, Z-axis 48 / 48 / 32 m/min. Motor torque X- / Y- / Z-axis 11 Nm / 11 Nm / 20 Nm Feed forces X- / Y- / Z-axis 3.67 kN / 3.67 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 600 mm Gedpfx Asw Ea Rgeg Tett Table length x width 850 x 400 mm T-slot size / number / distance 18 mm / 3 / 100 mm Max. load 400 kg Dimensions Length x width x height 2,100 x 2,300 x 2,750 mm Total weight 4,300 kg

Condition: new, carrying capacity 1000 kg number of suction cups 8 suction cup dia. 280 mm Vacuum lifter VH 8-1000 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 4x galvanized crossbeams with a length of 1,000 mm - 8x Springy, articulated and adjustable suction cup holders - 8x suction cups Ø 280 mm, in case of wear the seal can be separated whose metal supports can be changed inexpensively and without tools - 8x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. Godjnlb Rzspfx Ag Tstt - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, oil-lubricated rotary vane vacuum pump with a Suction power of 21 m³/h and an ultimate vacuum of 98% (20 mbar). - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: used, Year of construction: 2007, machine/vehicle number: IntNr231209, Item Description: Used LNS Express 220 Bar Feeder Year of Manufacture: 2007 Type: Bar Feeder Technical Details: Diameter Range: 2 mm to 20 mm Channel Diameter: 22 mm Maximum Bar Length: 3,000 mm Installation Dimensions (L × W × H): 3,970 × 480 × 1,250 mm Weight: approx. 850 kg Condition: Age-related wear and tear in line with the year of manufacture. Plexiglass cover is damaged; no other known faults. Special Features: Stability and Precision: Structurally identical to the Express 220 and 320, built on the same base as the Express 332. Provides optimal stability and vibration-free operation, ensuring high surface quality and dimensional accuracy at maximum productivity levels. Loading Capacity: Integrated loading ramp with a capacity of 240 mm allows for long periods of autonomous operation. Gsdpfx Aox Sv S Tsg Tstt Fast Diameter Changeover: Quick retooling of the channel guide in less than 2 minutes. Complete change of the guide elements possible in under 8 minutes. Guidance for 2–20 mm Bar Stock: Special channel guide system prevents bars from kicking out. Automatic opening of the channel guide during material feed-through. Summary: The LNS Express 220 stands out with its robust construction, ease of use, and high reliability. This used model, despite age-related wear and minor defects, remains a solid basis for precise and efficient production processes. The machine can be inspected under power by appointment. Modifications and errors in technical data and specifications as well as prior sale reserved.

Condition: used, Power supply, converter, converter, power supply unit, Smart-UPS, spare battery, UPS system -Transfer: in the current condition as seen -Error: L3 power level defective -Manufacturer: AdPoS, UPS system -Type: UPS Maxi-J FH 40 kVA -Dimensions: 825/440/H1270 mm -Weight: 154 kg Gtjdpofngw Tefx Ag Tst

Year of construction: 2021, condition: used, functionality: fully functional, You are bidding here on a Hobart rack conveyor dishwasher, model CN series. The machine was first installed in a canteen operation in 06/2021 and was used there for lunch service. Due to business closure, operations stopped in 12/2024. The dishwashing system was purchased new by the operator, treated with care, and all necessary maintenance was professionally performed. Gsdpfx Aox R R Utjg Tott The machine will likely be available for delivery from February 2026. HOBART presents the new generation of the proven CN series as a powerful PROFI version – the new rack conveyor dishwasher delivers increased efficiency and cost-effectiveness, making commercial dishwashing even more sustainable. Professional, powerful, and reliable for the daily demands of commercial kitchens. Optimal wash results with low energy consumption – even for plastic items. The CN series rack conveyor machines are modular, operating from left to right with pre-wash, main wash, rinsing, drying, and roller conveyor discharge. You will receive an invoice with indicated VAT. Equipment details: • Climate exhaust air heat recovery for smart energy use • Climate-Pro heat pump saves up to 20 kWh • LC detergent saving system • Triple rinse • Washing system with wide-angle nozzles • Dynamic-Dry drying • Automatic water consumption • Empty rack detection • Permanent soil removal: ASR soil discharge • Control system with USB interface • Drop-in washing system • Color-coded cleaning aids • Coded curtains • Coded wash and rinse arms • Deep-drawn drain fitting • Fully deep-drawn wash basin • Easy-to-clean condenser • No contact between wares and wash water • TRI-RINSE: high-quality rinsing result via 3-stage zone • PERMANENT-CLEAN soil removal: revolutionary filter system eliminates manual pre-rinsing • LC detergent saving: reduces detergent consumption by up to 50% • Automatic water adjustment: machine consumption automatically adapts to load • CLIMATE heat recovery: optimally uses exhaust air • CLIMATE-PRO heat pump: innovation meets efficiency and cost-effectiveness • RACK-FLOW sensor system: easy one-person operation • Fully deep-drawn tank: no residue build-up • Easy-to-clean condenser • Deep-drawn drain fitting • DYNAMIC-DRY drying: optimal results thanks to new blower technology with higher dynamic airflow—up to 50% increased efficiency Technical data: • External dimensions (W x D x H): 4215 x 2336 x 2150 mm (see photo sketch) • Pass-through width: 510 mm • Pass-through height: 440 mm • Electrical connection: 400V 3NPE 50Hz; 26.5kW • Model: CN-C-A-CDC • Serial number: 866707054 • Year of manufacture: 2021 6 months warranty on electrical components, limited to the replacement of defective parts (excludes labor costs for removal and installation). Warranty claims require installation and commissioning by an authorized Hobart service provider. Subject to change and errors.

Condition: excellent (used), This makes FAG Detector III extremely useful for detecting: - unbalance and alignment errors. - rolling bearing defects. - damage to gears. Gtjdpevb Id Iofx Ag Tst

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in showroom condition. Optimill F 200 HSC Premium CNC milling machine direct from the manufacturer. F 200 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Heavy-duty design · High productivity · High reliability · Heavily ribbed, torsion-free machine base · Linear guideway with roller circulation for high rapid traverse speeds on all axes · High-torque servo drives on all three axes · Telescopic guideway covers on all three axes · Automatic lubrication · Massive, precise milling table with five large, precision-ground T-slots Godpfxow Ea Avj Ag Tett · The portable electronic handwheel with enabling button and emergency stop rotary switch significantly simplifies program setup · Coolant system with chip flushing and cleaning gun · Through-spindle coolant supply with 20 bar pressure · Belt-type chip conveyor ensures efficient chip removal · Chip collection trolley · RJ45 interface and 230 V power connection · Enclosed electrical cabinet with integrated heat exchanger for optimal temperature control and prevention of dust ingress · Machine light in the work area · Additional SIEMENS material defect warranty package and free online/on-site OSS Plus service · 1-year Basic maintenance contract included in Germany/Austria/Switzerland Milling spindle: Inline spindle Machine specifications Electrical connection: 400 V / ~50 Hz Total connected load: 20 kVA Milling spindle Drive motor S1 operation: 10.5 kW Torque drive motor S1: 50 Nm Drive motor S6-30% operation: 26.4 kW Torque drive motor S6-30%: 125 Nm Spindle taper: SK 40 / DIN 69871 Coolant system Power of coolant pumps, 3 pcs: 1 kW Flow rate: 35 l/min Tank capacity: 200 liters Cleaning pump Cleaning pump power: 530 W Milling accuracy Repeat accuracy: ± 0.005 mm Positioning accuracy: ± 0.005 mm Tool changer Type: Double-arm gripper Number of tool stations: 24 Max. tool diameter: 78 mm Max. tool diameter (adjacent stations empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool to tool: 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed drive Rapid traverse X-, Y-, Z-axis: 48 m/min Motor torque X-/ Y- / Z-axis: 16 Nm / 16 Nm / 20 Nm Feed forces X-/ Y- / Z-axis: 5.34 kN / 5.34 kN / 6.68 kN Speed range Spindle speed*: 12,000 rpm Pneumatics Air pressure: 6 – 8 bar Air consumption per hour: 6 – 8 kg/m³ Milling table Spindle – table distance: 100 – 650 mm Table size (L x W): 1,000 x 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Max. table load: 500 kg Dimensions Length x width x height: 2,400 x 2,355 x 2,860 mm Total weight: 5,500 kg

Condition: new, carrying capacity 500 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-500 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) Gtjdoq Sc Auopfx Ag Tot - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: used, Year of construction: 2020, 2020 | DAF XF 530 FT | Used Tractor Unit | 277777 kms 📍Location: Germany, Rodgau 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Gedpsx Rr Afofx Ag Tjtt 💰 Buy Now for EUR 30300 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 37 inspection points 34 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: fair condition, dump hydraulics defective, lambda error 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39871 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Three-phase motor, electric motor -Transfer in current condition as seen -Foot defective, see photo -Power: 7.5 kW -Speed: 1430 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Dimensions: 510/370/H340 mm -Weight: 110 kg Gedpfx Aocwdmwsg Tett

Condition: new, functionality: fully functional, power: 29 kW (39.43 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 48 l, color: yellow, overall weight: 2,070 kg, maximum load weight: 900 kg, lifting power: 1,400 kg/m, lifting height: 2,680 mm, tire size: 27x10.5-15, tire condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, shovel volume: 0.36 m³, Year of construction: 2022, operating hours: 1 h, Equipment: UVV, additional headlights, all wheel drive, cabin, gripper hydraulics, head guard, low noise, pallet forks, parking heater, soot filter, standard shovel, traction control, === MAIN SPECIFICATIONS === Year: 2022 Operating hours: New / Unused Operating weight: 2,070 kg Max tipping load: 1,400 kg Bucket capacity: 0.36 m³ Drive: Hydrostatic Four-wheel steering: Yes Differential lock: Hydraulic (optional) Quick coupler: Yes Cabin: Closed Heated cabin: Yes Air conditioning: No Tyres: 27x10.5-15 – off-road tread Gsdpfx Asxct Dleg Tott Engine manufacturer: Yanmar 3TNV86CT Engine power: 28.5 kW Emission class: Stage V Hydraulic flow: 30 l/min (standard) / 60 l/min (Powerflow) CE certified: Yes === HIGHLIGHTS === Brand new / unused 2022 machine Yanmar Stage V engine – efficient and reliable Compact dimensions with excellent manoeuvrability Quick coupler, proportional controls, full documentation included CE-certified and ready for immediate use === CONDITION === New / unused – fully inspected, no defects, 100% functional. Inspection possible on request. === LOCATION & DELIVERY === Located in Sittard, The Netherlands. Worldwide delivery available. Price: €35,000 “as is” (Optional: €37,500 with 12-month warranty) The Kramer 5040 combines compact size with impressive lifting performance and manoeuvrability. Ideal for construction, agriculture, municipal services and industrial applications. CE-certified and immediately available. === DELIVERY === Crane loading available on request. Worldwide transport arranged by Collé Rental & Sales.

Condition: used, mileage: 594,833 km, power: 346 kW (470.43 HP), first registration: 12/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, navigation system, parking heater, * Defective * Auxiliary heater (parking heater) * Auxiliary air conditioning (parking cooler) * Lane departure warning * Differential lock Godpfjx Tyl Tjx Ag Tjtt * Distance warning system * Hill start assist * Seat heating ----Internal vehicle number: 11294-----Errors and subject to prior sale reserved

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine, direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control system stands out for its performance, speed, precision, and long service life. • Column design made of cast iron for high rigidity • Carousel-type tool changer with eight tool stations • All linear guides with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed-loop system) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling button and emergency stop slam switch greatly facilitates program setup • Coolant system with 70-liter coolant tank • Tool change carried out automatically or at the push of a button (electropneumatic tool clamping system) • Heavy-duty, precision-milled table – generously sized and finely surface-machined • Large access doors to minimize cleaning and maintenance times • LED machine lamp for full illumination of the work area • Additional SIEMENS package: material defect warranty and free on-site service (OSS) SINUMERIK 808D • Software package identical to control version, ensuring process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoders – no reference run required • Higher accuracy Control • 8.4” LCD color display with 800 x 600 resolution Additional SIEMENS OSS package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 10 kVA Horizontal milling table Length 690 mm Width 225 mm Vertical spindle to table distance min. 90 mm Vertical spindle to table distance max. 410 mm T-slot size 14 mm Number of T-slots 3 T-slot pitch 63 mm Maximum load 150 kg Accuracy Repeatability ± 0.015 mm Positioning accuracy ± 0.015 mm Pneumatic connection Operating pressure 6 bar Travel X-axis automatic 330 mm Y-axis automatic 220 mm Z-axis automatic 320 mm Spindle to column distance min. 280 mm Spindle to column distance max. 280 mm Vertical spindle Spindle taper BT 30 Speed range 10,000 rpm Drive motor power S1 continuous operation 3.7 kW Drive motor power S6-30% duty cycle 5.5 kW Drive motor torque S1 continuous operation 24 Nm Drive motor torque S6-30% duty cycle 36 Nm Feed speed X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Gtjdpfew Ea Swsx Ag Tst Feed motor torque X-axis S1 continuous operation 3.5 Nm Y-axis S1 continuous operation 6 Nm Z-axis S1 continuous operation 6 Nm Tool changer Type: carousel Number of tool stations: 8 Max. tool diameter: 100 mm Max. tool length: 200 mm Max. tool weight: 6 kg Tool-to-tool change time: 7 s

Condition: used, Hydraulic vise, machine vise, hydraulic vise, high-pressure clamp, hydraulic vise -hydraulic tension defective -sold as a source of spare parts Gtedpfecnhbpex Ag Tjt -Jaw width: 160 mm -Jaw height: 53 mm -Span: max. 170 mm -Support height: 80 mm -Weight: 62 kg

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Handed over in its current condition, foot defective (see photos) -Speed: 165 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Quantity: 1 available - Price: per piece -Dimensions: 450/140/H200 mm Gedpfeb S Tansx Ag Tett -Weight: 18.3 kg