Used Defect for sale (1,077)

Condition: repair required (used), Year of construction: 2008, machine/vehicle number: 10719G, functionality: limited functionality, The HEUFT K0 400 has already been professionally dismantled by HEUFT. All operating and hazardous materials have been completely pumped out, and the system has been prepared accordingly for further handling. The cost for the professional dismantling alone amounted to approximately €2,500. Furthermore, the system was regularly maintained up until the dismantling. The burner included in the sale has been serviced and is in good condition. Model: WG40N/1-A ZM-LN. Serial No.: 583489708. Fjdpszz Iniofx Am Eegi The boiler itself has also been regularly maintained. The significant defect that we are aware of is the burnt-through boiler base. In addition, the control cabinet and boiler pump will not be included in the sale. The boiler is ready for immediate collection.

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Y-axis: max. 100 m/min Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Positioning error, linear axes X/Y/Z: max. 0.08 mm Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Fgjdpfx Amoz Dvfxs Eei Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Base machine: 47.0 kVA Laser unit TruDisk 3001: 19.5 kVA Laser unit TruDisk 4001: 27 kVA Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Solid-state laser from the TruDisk series Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids

Condition: repair required (used), Year of construction: 1987, functionality: unexamined, Due to warehouse clearance and inventory reduction, various machines are offered here as untested, defective, for refurbishment, or for parts. The machines are offered in their current condition at favorable prices. Please refrain from making unreasonable price offers. Briquetting press / Chip press Manufacturer: RSN Type: ECO Motor power: 5.5 kW Briquet diameter: approx. 60 mm Year of manufacture: 1987 Dimensions: approx. 235 cm x 130 cm x 113 cm The machine has been stored in my warehouse for some time. It was once taken in as part of a trade-in, but there was never enough time to assemble and inspect the machine. Sale is exclusively as a defective parts machine or for refurbishment by hobbyists. Any defects cannot be ruled out. Visually, the machine appears to be complete. No parts are missing. (See pictures. A prior inspection is highly recommended; simply leave your phone number via email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information is without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading and packaging can be arranged by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options, so please inquire. The stated selling price is the net price plus VAT. Fodpoz Efvcjfx Am Eogi An invoice with VAT breakdown will be issued. Warranty basis: due to age and wear, the sale is exclusively to business customers without warranty, guarantee, or right of return. All information is without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, the warranty period is 12 months.

Condition: ready for operation (used), Extraction system consisting of a filter unit, rotary valve airlock, and a fan. Filter data: Filter base area approx. 2000 x 2000 mm Filter unit height approx. 5000 mm Fsdpfx Ajz Dtmyom Eegi Filters partially defective Return air duct Pipes from the filter to the fan Accessories: Rotary valve airlock approx. 1800 mm Fan: Output unknown (previously used to extract dust from a four-sided planer) Price ex works for self-dismantling Further technical data available upon request All information without guarantee

Condition: new, Attachment suited for: Construction machines Selling price: € 50, US$ 52,97 Fgsdpfx Aon Tm Uhem Eoi The GALEN screening buckets are made in three models(sceleton, rotary, impact screening) for use on excavators and loaders with capacities ranging from 7 to 40 tonnes, and has widespread application in screening natural material, such as river beds, quarry residues, sand and dry soil, as well as in all situations where fine screening is required. It is guaranteed against manufacturing defects for six months. Moreover, we always stand in back of our products and provide spare parts to everywhere with affordable prices. Detailed Information: screenbucket.net

Condition: good (used), The scope of delivery includes: 261x stacking transport box, used Fgodpfxepl Tcbs Am Esi Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Weight / pallet: approx. 95,00 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: used, B&R Provit Controller 5C2001- removed from K-Tec 200-1000S Fgedpfx Asp Rb Hcem Eoi - removed from running machine - fully functionalIf the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the ufacturer: B&R spare part no.: 1 manufacturer no.: 5C2001.16 Dition: gebraucht

Condition: new, Vehicle Charging Computer VAS 5908 Battery Charger Charging computer for vehicle starter batteries (lead-acid, gel, AGM, fleece batteries) VAS 5908 battery charger / external power supply with MPC4 control board and nominal 14VDC charging voltage (suitable for 12VDC vehicle electrical systems / batteries) - 100% compatible with vehicle electrical systems, protects vehicle electronics / airbag - Can be used as a charger, external power supply, and for supplying power to the vehicle in buffer mode (support during diagnostics / programming) - Extensive protection and self-protection functions - Short-circuit and reverse polarity protection - Protection function in case of battery defects - Safe spark suppression - User-friendly menu navigation / charging parameters can be configured - Built-in communication interface - Sealed housing, protected against internal contamination Housing version 'B': advantageous for industrial production lines - Status display via display and high-power LEDs - Menu navigation: German, English, French, Italian, Spanish - Extensive accessories, e.g. external status indicator (DBL-SIG-LR remote indicator), power / charging cable, wall mounting device, etc. - Option: Customer-specific charging parameters - Option: Low-temperature operation down to -40°C - Option: Battery diagnostic system - Option: Regeneration charging for deeply discharged batteries - Electrical safety - certifications: EN60335, EN60950, UL60950-1, UL1236, CSA C22.2 No.60950-1-07 Used by leading automotive manufacturers Input voltage Fgsdpfx Amsv Hptze Esi 100-240VAC wide range (tolerance: 85VAC-265VAC), 45-65Hz 130-350VDC; CAUTION: For use in combination with inductive power transfer, use special firmware! Inrush current / 30A at 264VAC, temperature-independent Automatic fuse: 16A slow-blow (e.g. characteristic B) Power consumption at full load / 0.98 - No-load power consumption / 10W, disabled at the output - Input fuse / F1 (2x 7A-8A T)/250V (6.3x32mm) - Transient overvoltage protection / Varistor (8kA / 151J) - Input connection / IEC/EN 60320, C14 - Weight: 8.2 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2018, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 568746, overall weight: 1,068 kg, load capacity: 210 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant manufacturer: KUKA, input voltage: 400 V, type of input current: AC, Details about the robot: Year of manufacture: 2018 Operating hours: Only 0.6 hours Condition: As new, flawless Model: Kuka KR 210-2700 Extra Inspection & Test: The robot can be inspected and tested on site at any time. This robot is ideal for applications demanding the highest precision and reliability. It has been carefully stored and is in impeccable technical condition. Fgjdpjwtx Imefx Am Esi Note: Sale as a used consumable machine with exclusion of any liability for material defects.

Condition: ready for operation (used), Year of manufacture: 2009 No power take-off (PTO) Air conditioning Front linkage, tipping body at the front and rear, hydraulics, all-wheel drive, hydrostatic drive, ready for use. Fgsdpfx Aswvf Avom Eei Optical defects, see pictures. Preferably sold to dealers or for export. Errors and omissions excepted. Pictures/description may vary.

Condition: used, Year of construction: 2000, machine/vehicle number: LC574, Technical Specifications & Performance Data This used bottling line is a complete isobaric PET solution engineered for high-volume beverage production of still water, sparkling water, and carbonated soft drinks. Built around robust Krones and Simonazzi process equipment with a Sidel SBO14 S2 blow molder, it offers dependable industrial packaging performance with consistent product quality. Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (configured for 2.0 L PET; format-dependent) Bottle formats: 0.10 L and 2.0 L; additional formats possible with change parts Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Core technology: Isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air conveyors, rinser, isobaric filler, capper, labeler, packer/shrink wrapper, palletizer, stretch wrapper, inspection and coding modules Main manufacturers: Krones, Simonazzi; blow molder: Sidel SBO14 S2 Years: Main line 2000; blow molder 1999 Condition: Ready for operation; safety features included Fgedpfsw D E Ubjx Am Eoi Advanced Automation & Control Systems Centralized PLC/HMI control coordinates blow molding, rinsing, isobaric filling, capping, labeling, and end-of-line functions. Recipe management supports format and product changeovers, with synchronized conveyors and VFD-driven motors to maintain constant flow at high speed. Line accumulation and defective-bottle rejection are integrated to minimize downtime and scrap. Automation level: Fully integrated, recipe-based operation Operator interface: Intuitive HMI with alarm diagnostics and production reporting Electrical: Industrial 3-phase supply (typical 400–460 V, 50/60 Hz; to be confirmed on inspection) Safety: Interlocked guards, emergency stop network, and category-rated safety circuits Production Line Integration Capabilities Designed for seamless integration across the packaging hall, the line interfaces upstream with preform handling and syrup room/premix systems and downstream with packers, palletizers, and warehouse logistics. Fast format change procedures and clearly defined change parts enable efficient switching between bottle sizes and product SKUs. Compatible with standard beverage production utilities (CIP, CO₂, chilled water) Interfaces available for inspection systems, laser/inkjet coding, and vision verification Modular conveyors allow adaptation to plant layouts and future upgrades Machine Condition & Maintenance History This second hand complete bottling line is in ready-for-operation condition with safety protections installed. The equipment has been maintained in a production environment and inspected for functional performance. Maintenance records, documentation, and layout drawings can be made available for review during a technical visit. Operational Performance & Versatil...

Condition: used, functionality: fully functional, machine/vehicle number: 906xxxxx, Year of construction: 2020, operating hours: 1,336 h, load capacity: 1,600 kg, lifting height: 4,590 mm, free lift: 1,498 mm, fuel type: electric, mast type: triplex, construction height: 2,030 mm, fork length: 1,150 mm, empty load weight: 1,237 kg, total length: 2,020 mm, drive type: Elektro, construction width: 800 mm, High-lift pallet truck Fgjdpjxfm Dqsfx Am Eoi Chassis number: 906xxxxx Load centre: 600 mm Mast type: Triplex Transmission: AC pulse control Condition: Refurbished without warranty Technical condition: Very good Front tyre type: Polyurethane Front tyre size: Load rollers, polyurethane, single Rear tyre type: Polyurethane Rear tyre size: Drive wheel, polyurethane Battery voltage: 24V Battery capacity: 375Ah Battery manufacturer: Jungheinrich Battery type: PzS Description: Fully refurbished by the manufacturer, UVV safety inspection passed, sold without warranty/liability for material defects. Pulse control, full free lift, sensitive lifting and lowering on both sides, discharge monitor, hour meter, creep speed button, battery (overhauled by the manufacturer 06/2025) with Aquamatik system, external charger included, unit refurbished by the manufacturer.

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 101851, Technical characteristics: Work Area - Maximum diameter of the clamping plate: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse in Z: 30 m/min - Y-axis travel: 40 mm / Rapid traverse in Y: 30 m/min - Standard closed automation (number of loading nests by workpiece diameter): 14/(80...200), 18/(30...160), 30/(30...85) Main Spindle - Spindle mount as per DIN 55026: Size 6 - Maximum speed: 4,500 rpm - Power (at 100 / 40% duty cycle): 18 / 27 kW - Torque (at 100 / 40% duty cycle): 202 / 303 Nm Tool Holder with Driven Tools - Cylindrical shank holders as per DIN 69880: 12 – VDI40 - Number of tool stations: 12 - Maximum tool length (including holder): 190 mm - Maximum speed: 6,000 rpm - Maximum torque at 10% duty cycle: 37 Nm, 25% duty cycle: 26 Nm, 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 – 480 V - Connected load: 42 kW Dimensions - Overall machine dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm - Weight: 6,500 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading. - Control: GE Fanuc Series 18i-TB. Fedpsxvy Azsfx Am Eegi - High precision: Positioning accuracy on X, Z, and Y axes ±0.001 mm, Heidenhain linear scales. - Main Spindle: High power and wide speed range. - Automated Loading/Unloading: Parts are loaded and unloaded via integrated automation. - Driven Tools: Use of live tooling extends processing capabilities to include drilling and milling operations. - Chip conveyor Machine Status: NOT OPERATIONAL - Lifetool Motor - X-axis optical scale defective + connection cable - Z-axis belt - Lubrication pressure switch - Hydraulic main pressure valve - Door safety switch (Euchner)

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 2460061, Technical specifications: # Machining Workspace: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A) + indexable dividing head with direct angular measurement system, max rotational speed 50 rpm, accuracy +/- 5 arcseconds # Max. clamping dimension/part: Ø 575 x 830 mm; max. weight 360 kg # Rapid traverse (X/Y/Z): 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Distance between spindles: 300 mm # Spindle speed range: 1–17,500 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2x32 tools / average chip-to-chip time 2.5 s # Max. tool Ø 75 mm / max. length 275 mm / max. weight 7.5 kg Electrical data: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Required installation footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring system: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling unit # Spindle, guideways, and switchboard cooling system # 2 oil lubrication units # Oil mist extraction/recovery system: ELBARON Vario E2000 (2,000 m³/h) # Oil filtration system with paper filter, max. 80 bar: Knoll KF200/1200 # Fire suppression: Kraft & Bauer # Part presence monitoring P/Y: with low pressure air detectors # In-process measurement: Marposs T25 # Tool breakage monitoring & length measurement: inductive sensor # Tool holding confirmation in main spindle Machine status: NOT OPERATIONAL # Motorised loading/unloading door # Table A axis # Tool magazine chain # Euchner safety switch, loading door # 5 hydraulic switches (Parker) # 2 pneumatic pistons for tool magazine access # 2 pneumatic pistons for tool clamping # Complete hydraulic system # Hydraulic motor (motor can also be retrofitted) Fgedpfx Ajxw R Udem Eei # Compressed air regulator # Chip conveyor/extractor – needs repair # Z-axis linear scale # X-axis linear scale # Numerical control flash card # 4 communication modules (Murr) # 1 of 2 spindles defective – replacement spindle available in stock

Condition: used, Demag Ergocontrol, 4 MB- for NC4 control system - removed from Demag ET 6 system - removed from running machine Fgsdpfxjrr Ehms Am Eoi - fully functionalmanufacturer: Demag spare part no.: 7If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: used, Year of construction: 2021, Overview  The bottle unscrambler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to handle explosive products. The machine can be purchased with warranty.  Technical data  Capacity  12.000 bph at 50 ml HDPE, oval 43 x 23 x 95 mm  14.000 bph at 250 ml HDPE, Ø60 mm x 126 mm Incl. 2 format sets for processing the above mentioned bottle sizes. Bottle sizes Fully enclosed cabin, machine frame and wall panels in stainless steel Floor frame in mild steel, painted (similar to RAL 9006 silver gray) Quick access due to large doors as well as quickly removable panels Rejection of defective bottles  Easy format changeover due to quick-change system without tools Siemens S7 control system  Bottle loading system with hopper 1000 l, in stainless steel, chassis and supports in mild steel, painted Positronic control system for optimum adaptation to downstream filler Fodpfx Ajmk I Dwjm Ejgi

Condition: repair required (used), Year of construction: 2007, functionality: not functional, power: 250 kW (339.91 HP), volume flow: 2,256 m³/h, pressure (max.): 9.75 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Screw compressor Atlas Copco GA250FF Dryer integrated 250 kW 9.75 bar 37.80 m3/min Year of manufacture: 2007 Main motor defective Fjdpfszhu Nasx Am Eegi Price: 9,000 EUR

Condition: used, Year of construction: 1998, Working width 1350 mm Number of sanding units x st. Used Machine Year of manufacture: 1998 Condition: Overhauled by a Heesemann factory technician, including a new feed belt Features and Technical Specifications: - 1 automatic belt sander with combination unit - with electronic articulated pressure beam - for sanding soft and hard veneers - calibrating and fine sanding solid wood - Calibration of workpiece carrier panels - Removal of defective veneers and coatings - Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings - Sanding of barrier films - With graphical operator terminal - NC-controlled thickness adjustment from 3 to 150 mm - Activation of the calibration roller via the terminal - With patented CSD articulated pressure beam for compensating workpiece tolerances up to 2 mm - Sanding width: 1,350 mm - Sanding belt length: 2,150 mm - Frequency-controlled sanding belt speed: approx. 2–18 m/sec - Sanding shoe width: 100 mm - Sanding unit drive: 15 kW - Feed speed: 5/10 m/min - Compressed air: 6 bar - Compressed air consumption: 15 NL/min Fodpfxezk Nxze Am Esgi - With belt dust extraction: 490 l/min - Exhaust ports: 1 x 180 mm, 2 x 100 mm - Air requirement for grinding unit: 1,800 m³/h - Required air velocity: 20 m/sec - Total power connection: approx. 17 kW - Dimensions: 2090 x 1670 x 2020 mm - Weight: approx. 2500 kg

Condition: new, Year of construction: 2026, The HDE Series Hopper Dryers are designed for efficient drying of plastic granules before extrusion, injection molding, and blow molding processes. Moisture contained in plastic materials can cause defects such as bubbles, silver streaks, poor surface finish, and reduced mechanical properties. The HDE Series effectively removes surface moisture using a controlled hot-air circulation system, ensuring stable processing conditions and consistent product quality. All material-contact surfaces are manufactured from stainless steel, preventing material contamination while providing excellent corrosion resistance and long service life. The precision cast aluminum hopper offers excellent heat retention and ensures uniform drying throughout the entire material batch. A specially designed hot-air diffuser distributes heated air evenly inside the hopper, significantly improving drying efficiency. The low-noise blower delivers stable airflow while preventing dust from entering the material. The hopper is equipped with a material level inspection window, an auto loader mounting port, and safety systems protecting against overheating and motor overload. The modular design allows quick cleaning and fast material changes, making the HDT Series suitable for continuous industrial operation Technical Specifications Hopper Dryer HDE-25 • Hopper Capacity: 25 kg • Blower Power: 135 W • Heater Power: 3.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 3.6 kW Fgjdezv Emlspfx Am Eoi • Installation Size: 150 × 150 mm • Dimensions (L × W × H): 830 × 580 × 840 mm • Weight: 34 kg Hopper Dryer HDE-50 • Hopper Capacity: 50 kg • Blower Power: 155 W • Heater Power: 4.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 4.7 kW • Installation Size: 160 × 160 mm • Dimensions (L × W × H): 920 × 590 × 940 mm • Weight: 45 kg Hopper Dryer HDE-100 Technical Specifications • Hopper Capacity: 100 kg • Blower Power: 215 W • Heater Power: 6.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 6.7 kW • Installation Size: 178 × 178 mm • Dimensions (L × W × H): 1070 × 700 × 1080 mm • Weight: 68 kg

Year of construction: 2019, condition: used, functionality: fully functional, This is a tilting frying pan from the premium manufacturer MKN, type Optima 850 Gas 3/1 GN with motor-assisted tilting. The unit has undergone a comprehensive inspection in our in-house workshop and is fully functional, with a 6-month warranty on all electrical components. The tilting frying pan is in good used condition, free of defects, and is mounted on legs. If required, the legs can be removed so that the unit can also be mounted on a plinth. The manufacturer's list price is €29,140 net. Our price: €8,226.89 net = €9,790 gross. You will receive an invoice with VAT shown. Our used equipment service for you: * 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. * High-quality branded equipment at fair prices. * Professional overhaul/inspection and expert cleaning. * Tested & fully functional - or your money back. * Flexible shipping or self-collection options. * Competent advice - before and after purchase. * Provision of operating instructions, connection diagrams & spare parts. * Inspection according to DGUV V3. Technical data: * W x D x H: approx. 1600 x 850 x 850 mm (without legs 700 mm) * Pan interior dimensions: 1020 x 540 x 210 mm deep * Power connection: V: 220-240 / kW: 17 * Type: 10019153 * Serial number: 19207555 * Year of manufacture: 2019 * Nominal capacity / Usable capacity: 116 / 94 liters Condition: Used, comprehensively inspected, fully functional. Further details: * Optimized nominal capacity: 116 liters * Usable capacity: 94 liters Fodpfozu Rpvjx Am Eegi * The front-mounted pivot point of the pan and the shape of the pouring opening prevent the pouring stream from wandering and scattering, guaranteeing complete emptying. * 55 mm cleaning gap between the pan and the side frame. * Standard equipment includes a double-walled hinged lid and mixing tap. * The pan base is made of a special sandwich material as standard for even heat distribution. * Thermostatic temperature control. Shipping: * Delivery or self-collection by arrangement. * Worldwide shipping on request. * Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. Sales are exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2021, functionality: fully functional, Save on liquidity – leasing and hire purchase options available! You are bidding on a Hobart rack conveyor dishwasher, type CN series, in top condition, energy-efficient, with exhaust and wastewater heat recovery. This will result in significant long-term energy savings. The machine was first installed in June 2021 in a canteen and used for lunch service. Due to the closure of the business, operations were discontinued. The dishwasher was newly purchased by the operator and accordingly well-maintained, with all necessary servicing carried out. Fsdpfx Ajzu Rwmem Eogi HOBART presents the new generation of the proven CN series as a powerful PROFESSIONAL version – the new rack conveyor dishwasher stands for greater efficiency and economy, making commercial dishwashing even more sustainable. Professional, powerful, and reliable for the daily challenges in commercial kitchens. Optimal washing results with low energy consumption – even with plastics. The CN rack conveyor dishwasher series has a modular design and operates in a left-to-right configuration, starting with pre-washing, main washing, rinsing, drying, and discharge via a conveyor belt. The disassembly was carried out by Hobart’s factory service department. Commissioning will also be carried out by the factory service department, with a contribution to costs, so that the warranty applies. This machine has a list price of approximately €58,000 net / €69,020 gross. You will receive an invoice with VAT shown. 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. A prerequisite for warranty claims is that the machine is installed and commissioned by an authorized Hobart service department. Technical data: External dimensions of the dishwasher: W: 4215 x D: 2336 x H: 2150 mm, dimensions see photo sketch Passage width: 510 mm Passage height: 440 mm Electrical connection: 400V 3NPE 50Hz; 26.5kW Model: CN-C-A-CDC Serial number: 866707054 Year of manufacture: 2021 Subject to change and errors.

Condition: used, mileage: 215,564 km, power: 80 kW (108.77 HP), first registration: 11/2008, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 04/2027, color: white, gearing type: mechanical, emission class: euro4, number of seats: 3, total length: 7,050 mm, total width: 2,170 mm, total height: 3,100 mm, Year of construction: 2008, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Known defects: The engine control light is active. The vehicle does not deliver full power. Suspected defect in the turbocharger. The vehicle is roadworthy, no smoke, etc.----Mercedes-Benz Sprinter 311 cdi box van, second owner. MOT/emission test (TÜV) – valid until 04/2027. Due to previous use in gardening and landscaping, the cargo area is worn. New all-season tires and new brake discs and brake pads on the front and rear axles.----Special equipment: Fgedpfx Aez N Rhgem Eoi Battery 100 Ah, spare wheel in driving condition, spare wheel holder under the end of the frame including jack, seats in the cab: passenger double seat, seats in the cab: driver's seat comfort, rear stabilizer reinforced, front stabilizer reinforced, front axle reinforced Additional equipment: Airbag driver's side, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, headliner in the cab, lockable glove compartment, body/superstructure: standard flatbed, fuel tank: main tank 75 liters, headlight range adjustment, truck registration, engine 2.1 liters - 80 kW CDI CAT, wheelbase 4325 mm, low emission according to emission standard Euro 4 Group III, service interval display Assyst, heat-insulating glazing, permissible total weight 3.50 t

Condition: used, machine/vehicle number: 425130268, Year of construction: 2016, operating hours: 813 h, load capacity: 1,000 kg, fork length: 1,150 mm, empty load weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! Auction of two Jungheinrich EPL 110 (manufactured in 2016 & 2015) The 2015 unit is defective and will be sold as a source of spare parts! TECHNICAL DETAILS Lifting capacity: 1,000 kg Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 85 Ah Dimensions & Weight Dimensions (L x W x H): 1,600 x 800 x 1,940 mm Self-weight: 500 kg Serial number, unit 1: 425130268 Operating hours, unit 1: 813 h UVV certificate, unit 1: 04/2026 EQUIPMENT Integrated battery charger Fsdpfjzwpctjx Am Eegi The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: used, mileage: 68,799 km, power: 62 kW (84.30 HP), first registration: 12/2011, fuel type: diesel, empty load weight: 2,850 kg, maximum load weight: 650 kg, overall weight: 3,500 kg, axle configuration: 4x4, next inspection (TÜV): 07/2027, color: white, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 5,300 mm, operating hours: 5,692 h, Equipment: air conditioning, all wheel drive, Machine is conditionally ready for operation, rear axle is defective, all-wheel steering. Non-binding offer – subject to changes and prior sale – sale is made excluding any warranty – all information without guarantee! Fsdpfx Amoz A Afij Esgi

Condition: excellent (used), Year of construction: 1998, Great opportunity! Weber rescue set, first owner, in top condition, with cutter and spreader. From the former inventory of the town of Harsewinkel, we can offer you this top-maintained rescue set from the world-renowned brand "Weber," first owner! The E45L unit was put into service by the town of Harsewinkel in 1998, along with the S 130 rescue cutter and the SP 30 LS spreader. The rescue set was used only sparingly, inspected annually until 2026, and decommissioned in 2026 due to a new acquisition. All devices are in excellent optical and technical condition, have no significant damage, and only show minor scratches or other normal signs of wear, which, however, do not in any way restrict the use of the devices – see pictures! The cutter has a damaged blade – a new blade is included! Pressure: 630 bar Power supply: 230 volts All devices are equipped with single couplings. 1 EURO 120x80x80cm, approx. 100 kg Pickup during our regular business hours. Please arrange an appointment! Shipping via a freight forwarder is possible for an extra charge. Fedpfx Ajz Atnqem Eegi The sale is exclusively for commercial businesses. You will receive an invoice without VAT, as the item comes from a public institution. Private buyers have the option to purchase the device "on behalf of a customer"; a direct commercial sale to private individuals will not take place! The goods are sold with the exclusion of any warranty or liability for defects. This exclusion does not apply to claims for damages resulting from gross negligence or intentional breach of the seller's obligations, as well as to any injury to life, body and health. For questions regarding prices or technical details, please do not hesitate to contact us at the address provided.