Used Demag Pk 1 for sale (512)

Condition: used, Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control -Manufacturer: DEMAG Mannesmann Dematic, crane control PNN-BUS-3 Hnodpeqh Edpsfx Aatsk -Type: RC-E 10 -Total dimensions: 380/180/H125 mm -Weight: 2.2 kg

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable Hodpexzqx Rsfx Aatenk -Type: DST6DZP21 -Connector: Cable see photos -Transport dimensions: 660/200/H100 mm -Weight: 3 kg

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable Hnedsxzq Thopfx Aatjk -Type: 6x Option key, 2-stage -Connector: 16-pin -Transport dimensions: 630/370/H140 mm -Weight: 5 kg

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 89 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm Hsdpfxec Sxqhs Aatsnk -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg

Condition: used, Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block Hnodpfxod A Hgks Aatek -Transfer in current condition as seen -Operation is missing a switching element (can be installed at an additional cost) -Motors tested: and ok -Rated load: 1125 kg -Lifting speed: 6.3 m/min -Lifting height: 6.3 m -Dimensions: 1100/1000/H700 mm -Weight: 368 kg

Condition: used, Gear motor, electric motor Hnedpjc Sxqksfx Aatsk -Speed: 185 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg

Condition: used, Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer engine DEMAG type: KBA-112-MB-6 -Manufacturer engine DEMAG type: KBL-71-A4 -Manufacturer gearbox DEMAG type: FG08-B-14-U-0-H1- -Power: 0.3/2.9 kW -Speed: 106/945 rpm -Construction: B14 -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 670/300/H500 mm Hnsdpfx Aocb E Trsatok -Weight: 102 kg

Condition: used, Year of construction: 1995, functionality: fully functional, total width: 900 mm, total length: 1,300 mm, shelf height: 900 mm, total height: 900 mm, load capacity: 1,000 kg, Automatic pallet racking system by Mannesmann Demag Fördertechnik AG Solomat 1010 from 1995 with upgraded Siemens Semiautomatic SIMATIC HMI control from 2024. Travel speed: 115 m/min Lifting speed: 23 m/min Extension speed: 87/50 m/min Hodpfoykz Dkjx Aatonk

Year of construction: 1989, condition: good (used), machine/vehicle number: MBUT133-617, Technical data: 1x Demag KBK 1 wall-mounted slewing jib crane NL 125KG with steel ST chain hoist 125Kg Payload at full radius 125KG / 0.125to payload Outreach: approx. 2m Weight complete approx. 150Kg incl. wall bracket incl. bolts, cable drag, trolley, end cap etc. incl. steel chain hoist NL 125Kg Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Item location is 75053 Gondelsheim Hsdpfxoty Swtj Aatonk There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Year of construction: 1989, condition: good (used), machine/vehicle number: MBUT133-644, Technical data: 1x Demag KBK 1 wall-mounted slewing jib crane NL 125KG with steel chain hoist 125Kg Payload at full radius 125KG / 0,125to payload Outreach: approx. 3m Weight complete approx. 150Kg incl. wall bracket incl. bolts, cable drag, trolley, end cap etc. Hjdsty Swyjpfx Aatsnk incl. steel chain hoist NL 125Kg Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Year of construction: 2001, condition: excellent (used), machine/vehicle number: 20020232 EG 1 Brücke, DEMAG KBK crane canopy crane runway with dimensions approx. 31 x 6m (6m bridge - double girder crane) Hnodpfxoty Tcqs Aatok Payload / lifting capacity 1000 KG - 1to Technical data of the system: Crane runway made of Demag KBK2 rails with internal current routing System is supplied complete: KBK rails, rail joiners, trolleys, end plates, cable trailing, brackets/hangers etc. incl. Demag DK5 - 1000KG chain hoist - lifting height approx. 4m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: good (used), Load capacity: 500 kg Total length: 10m Hsdpfxjg T Ib He Aatsnk

Condition: good (used), Total height: 2960mm Lifting range: 1100-2400mm Hjdpfx Asik E S Dsatenk Boom length: 900mm

Year of construction: 2010, condition: excellent (used), machine/vehicle number: MBHF-4BR125, DEMAG KBK crane sky crane runway dimensions approx. 33x6.5m + 4 cranes Payload / lifting load 4x125 KG - 0.125to The crane can also be halved in length Technical data of the system: Crane runway made from Demag KBK2/KBK2T rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, trailing cables, power supply, holders/hangers, etc. Hnsdpfx Aaem Tvvijtsk incl. 4 bridges with 125KG chain hoist 3x Demag DC-COM + 1x steel Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Year of construction: 1999, condition: used, Demag KBK 2 - crane sky crane runway Hsdpfxoct Dhao Aatjnk Please ask your crane track according to your measurements. Payload / load lifting 80-125-250-500 up to 1000 Kg Technical data of the plant: Profile Demag KBK 2 rails Also available as monorail with elbows and points! Mounting height variable System can be supplied complete KBK rails, rail connectors, chassis, end plates, cable chain, holder / hanger etc. Optional all chain hoists are available Due to the low weight Taken assembly in lightweight construction / wooden buildings or older buildings is possible. Very good used condition Rails available in yellow or red! Shipping preferred possible pickup by freight Demag KBK1, KBK2L, KBK2 and KBK3 rails are in stock! Contact Person: Mr. Goepferich info ÄT mobatgg . de

Condition: good (used), Year of construction: 2010, clamping force: 1,600 kN, Equipment: documentation/manual, Sumitomo Demag Systec 160/520 – Injection Unit 430 CLAMPING UNIT Clamping force: 1600 kN Mould closing force: 1760 kN Max. opening stroke: 500 mm Min. mould height: 275 mm Max. mould height: 585 mm (685 mm with WA) Max. daylight between platens: 1085 mm (1185 mm with WA) Platen size: 770 × 770 mm Distance between tie bars: 520 × 520 mm Max. mould weight: 2200 kg Max. weight on moving platen: 1300 kg Max. weight on fixed platen: 1700 kg EJECTOR Ejector stroke: 160 mm Ejector force: 59 kN Ejector return force: 29 kN INJECTION UNIT 430 L/D ratio: 20 Screw Ø40 mm Injection pressure: 2025 bar Shot volume: 231 cm³ Shot weight (PS): 210 g Max. dosing stroke: 184 mm Nozzle stroke: 400 mm Nozzle immersion (SVO): 20 mm Nozzle contact force: 80 kN Barrel heating power: Ø35 → 9.4 kW Ø40 → 11.1 kW Ø45 → 11.3 kW Electric screw drive (WA): 22 kW Material hopper capacity: 35 l MACHINE OVERALL Oil tank capacity: 400 l Pump motors: 22 / 30 / 30 kW Total installed power: Hnedpfx Aaeyarfdjtok 31.4 / 39.4 / 39.4 kW 33.1 / 41.1 / 41.1 kW 33.3 / 41.3 / 41.3 kW EUROMAP 6 (dry cycle): 1.95–364 / 1.75–364 / 1.75–364 Machine weight (without oil): 6800 kg Dimensions (L × W × H): 5.3 × 1.6 × 2.1 m Noise level: 68 / 71 / 68 dB(A)

Condition: refurbished (used), DEMAG wire rope hoist / crane DH 316 H12 (completely overhauled) 2 units available. Hnsdsxq Rx Aepfx Aatok

Condition: good (used), 1. DEMAG drum brake Type: TH806/60 - RT315 TH806 2 units available. Hodpfxsu Uvmfj Aatonk 2. ELDRO electrohydraulic lifting device Ed 1250/60

Condition: new, DEMAG rope pulleys / rollers - 19 pieces: 6 pieces diameter 180 mm. / inside 40 mm. Hedpfx Aasu U Rayjtenk 2 pieces - 260 mm. / 45 mm. 6 pieces - 260 mm. / 90 mm. 1 piece - 310 mm. / 90 mm. 4 pieces - 410 mm. / 90 mm.

Condition: new, DEMAG hoist motors / crane motors / travel motors / drive motors: 1. Hoist motor type - MBV 132 C 12/2 - 1 piece (new). 2. Hoist motor type - MBV 100 A 12/2 - 1 piece (new). 3. Hoist motor type - ZNK 100 A 8/2 - 10 pieces (new). 4. Hoist motor type - ZNK 80 A 8/2 - 1 piece (new). 5. Travel motor type - ZBF 90 B 8/2 - 2 pieces (new). 6. Travel motor type - ZBS 80 b 12 - 8 pieces (new). 7. Travel motor type - ZBA 132 AL B050 - 1 piece 8. Travel motor type - KBA 80 B4 - 1 piece (new). 9. Traction motor type - KBA 90 B4 - 2 pieces 10. Traction motor type - ZBA 80 A4 - 2 pieces 11. Lifting motor type - 24/14 K4 P - 1 piece 12. Lifting motor type - 13/6 KF2 - 1 piece Hodpfxju U Uznj Aatonk 13. Lifting motor type - 13/6 L4 - 1 piece 14. Traction motor type - 13/6 KF 8-2 - 2 pieces

Condition: excellent (used), Year of construction: 2001, operating hours: 70,180 h, clamping force: 800 kN, screw diameter: 40 mm, injection pressure: 1,830 bar, injection weight: 205 g, Demag Ergotech Viva 800-400 (144) Description without hopper Hnedpfx Aevvtx Tjatsk General information Product Code: 144 Availability: In Stock Year of production: 2001 Brand: Demag Technical data Shot Weight: 205 g Clamping Force: 800 kN Screw dia: 40 mm Injection pressure: 1830 bar Tie bar distance: 400 x 400 mm Platen size: 590 x 580 mm Mould height min.: 250 mm Type of controls: NC4 Language: German Power: 26,1 kW Workinghours: 70180 h Weight: 3600 kg Dimensions: 4,35 x 1,7 m Hopper: No Core pull: Yes

Condition: ready for operation (used), Year of construction: 1993, Some older plastic injection molding machines from Arburg, Demag and Stübbe are available. 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, mold installation height min./max.: 225mm/not specified, opening stroke: 325mm, tie bar spacing: 270mm/270mm, screw diameter: 20mm, core pulls: 1. 5) Arburg 320 850-210, year of manufacture: 1986, clamping force: 850kN, shot weight: 108g, mold installation height min./max.: 250mm/625mm, opening stroke: 375mm, tie bar spacing: 320mm/320mm, screw diameter: 35mm, core pulls: 0. On-site inspection is possible. Individual sale possible. Hodpfx Ajx Hz Sbjatsnk

Condition: ready for operation (used), Clamping force: 350kN, tie bar distance: 280mm/280mm, platen dimensions X/Y: 410mm/410mm, min. mold installation height: 180mm, max. opening stroke: 350mm, max. platen distance: 530mm, screw diameter: 22mm, shot volume: 47.5cm³, shot weight (PS): 41g, injection pressure: 2440bar, control: NC4, heating power: 6.3kW. Machine dimensions X/Y/Z: approx. 3100mm/1100mm/1600mm, weight: approx. 1800kg. On-site inspection is possible. Hnsdpfswaa H Djx Aatsk

Year of construction: 1972, condition: ready for operation (used), Includes (1) DEMAG TC 140 crane, year of manufacture: 1972, load capacity: 50t at 3m radius, slewing angle: 360°, outreach: 5500mm, drive: pneumatic, hydraulic, electric, operating hours: 7153h. (2) Faun LK 910/483-V vehicle, operating hours: 1214h. On-site inspection is possible. Hnjdouzx T Rspfx Aatok

Condition: used, Year of construction: 2007, - Sumitomo Demag IntElect 210/580-1000, year of manufacture 2009: 6260 x 1555 x 2219 mm (L x W x H), net weight 11,000 kg - Sumitomo Demag IntElect 210/580-1000, year of manufacture 2009 (excluding pictured handling equipment / temperature control units / material feed [hopper, conveyor]). Hnodpew E N S Tefx Aatjk Designation: SGM Operating hours Cycle counter Cylinder heating Electric drives Sumitomo Demag IntElect 150/520-610 29,125 26,530 3,562,329 Sumitomo Demag IntElect 210/580-1000 27,297 25,717 3,450,308 Injection moulding machine Sumitomo Demag IntElect 150/520-610, year of manufacture 2007 (excluding pictured handling equipment / temperature control units / material feed [hopper, conveyor]). Designation: SGM Operating hours Cycle counter Cylinder heating Electric drives Sumitomo Demag IntElect 150/520-610 29,125 26,530 3,562,329 - Sumitomo Demag IntElect 150/520-610, year of manufacture 2007: 5348 x 1468 x 2400 mm (L x W x H), net weight 7,400 kg. Demag 150: Screw diameter Ø 45 mm