Used Die Cutting Machine for sale (90,796)

Year of construction: 1995, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Iedpfjb A Nc Hjx Agzoik -operated: pneumatically -Year of manufacture: 1995

Condition: reconditioned (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 7923278, type of input current: three-phase, overall weight: 8,200 kg, total height: 2,130 mm, total length: 3,320 mm, total width: 2,440 mm, space requirement width: 2,440 mm, input current: 30 A, input frequency: 50 Hz, nominal power: 7.5 kW (10.20 HP), rotational speed (max.): 4,600 rpm, rotational speed (min.): 1,500 rpm, 72x102 cm die cutter for thin paper and light carton up to 600 gsm. Exceptionally stable and very silent fast cylinder press. Floor anchoring is not necessary. Ijdpfjx Hzm Sox Agzsik

Condition: good (used), Heidelberg OHT „windmill” Letterpress Machine for die cutting, printing, creasing, perforating numbering, etc. The condition of the machine is very good, after inspection. 100% original, without modifications. This is a machine from the end of production, the distinguishing feature of this version is the exclusive roller paws, a drawer under the machine and a large wheel protection cover, a red knob on the piston lever. Ink system. Full set of accessories and tools. Machine format 26x38cm Weight 600gsm Speed ​​5000 sheets/h Weight 1200kg Power supply 400V Fully complete, two frames, spare elements, documentation included. A very rare machine on the market. Iijdpowxtb Ssfx Agzok

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools Isdox I Acqspfx Agzjik – Hardened pressure plate

Condition: good (used), Year of construction: 2023, operating hours: 5,001 h, functionality: fully functional, X working area max.: 3000 mm Y working area max.: 1500 mm Control: TRUMPF Control based on Rexroth IndraMotion MTX Machine: - Closed machine frame - Hybrid axis system - Linear magazine with 24 slots for clamps and tools - Hydraulic clamps (3 pieces) - Drives with maintenance-free three-phase motors - Repositioning with programmable hold-down device - Foot pedal for clamp closing - Parts chute on the right Punching Head: - Delta Drive - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch lubrication spray system - Punch slug extraction - Forming function - Stroke counter for punches Control: - TRUMPF Control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Programmable cutting gas pressure - Automatic shut-off - Remote support interface - Program management Iijdpfjxxbwxex Agzsk - Production planning Data Transmission: - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Dual-beam safety light curtain Extended Standard Equipment: - 1st positioning pin (inside right) + Brush tables + MultiTool + Thread forming with thread counter + Thread-former breakage monitoring + Lubricant level monitoring + Marking/rapid beading + Deburring and rolling technology + Adaptive stroke calibration + Die lubrication spray system + Smart Punch Monitoring + Parts flap on the left + Parts conveyor belt for parts flap left + Collection tray for parts conveyor left + Sensor for parts chute + Parts conveyor for parts chute right + Additional clamp + 4x individually openable clamps + 4x height-adjustable clamps + Automatic clamp closing loading sensor system + Optical loading sensor + Automatic repositioning movement to compensate for loading tolerance + Repositioning device for DeltaDrive + Vibration-dampened installation + Chip conveyor with tilting bin + Machine status light + Warpage detection + Wireless Operation Point SheetMaster Compact 3000 x 1500 (AK05): - Loading station with spreading magnet for sheet separation - Suction frame - Vacuum sensors - Double sheet detection - Unloading cart for residual grids and microjoint sheets - Second operator station for loading and unloading + Compact setup for light grid and reference point system + Peeling system SortMaster Compact: - Machine-integrated automated small part removal - Suction frame for unloading good parts up to 600 x 400 mm (X x Y) - 2 suction bars (each suction cup individually controllable) - Unloading area 600 x 800 mm - Vacuum sensors for the suction circuits + X-axis extension - Extension of the unloading area to 1200 x 800 mm

Condition: used, Punching machine for, e.g., slipcases with many punching dies Iedpsxw N Ntjfx Agzoik

Year of construction: 1999, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Iedpfxeb A N T He Agzoik -operated: pneumatically -Year of manufacture: 1999 -Dimensions: 600/600/H1300 mm -Weight: 50 kg

Year of construction: 2015, condition: excellent (used), functionality: fully functional, YAWA DIE-CUTTING MACHINE (STRIPPING UNIT) • TYPE : MW1050YA • SIZE : 75 x 105 cm. • YEAR : 2015 : DETAILS: AUTOMATIC DIE CUTTER WITH STRIPPING Max Sheet Size 750mm x 1050mm Min Sheet Size 370mm x 450mm Max Pressure 250 x 10(4) N (250 ton) Cardboard 157-2000g/m(2) Paper 100g/m(2) Max Speed 5,000 sheets per hour Very Good Condition Iijdpfxovm A R Te Agzek Immediate Delivery

Condition: new, Die Cutting Machine ML-800 NXL The machine is brand new. It is the strongest machine on market, in this size. Format: 830 x 590 mm Weight: 2500 kg Power supply 380 V Engine: 3 kW Equipment: - Electromagnetic clutch and brake - Quick assembly frame Iijdpfx Ajxx Hyrsgzjk - 3 modes: continuous, with time delay, manual - Central lubrication - additional safety cover - Tools and instructions with documentation CE. We provide installation and training. We provide a warranty of 12 months.

Year of construction: 2019, condition: excellent (used), Web width: 500 mm Speed: max 150 m/min Main unwinding - Unwinding with bearings on both sides - Pneumatic roller lift - Servo drive Vacuum cutting table BST web edge control Vacuum station (2x) - Servo drive - Adjustable web width Die cutting station - Servo drive - Pneumatically operated PowerBridge - Easy tool change thanks to Moving bridge - Register mark control Rewinder/unwinder - Separate servo drive for winder and auxiliary shaft - Direction of rotation on both sides Iiedpfx Agou Iucujzjk - Pneumatic clamping - Automatic diameter calculation Tube Scan - web monitoring Web buffer unit ( static) Tandem rewinder - Separate servo drive in each case - Friction shafts - Cutting table for web fixing - Separate display S-CONtrol - Convenient and intuitive to operate - User and recipe management - Display on rail system

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers Iiedpfsxxbdljx Agzsk - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post

Year of construction: 2018, condition: repair required (used), functionality: limited functionality, machine/vehicle number: E01.1.0238.0119.18.1, Demo machine – has not previously been used in production. Being sold due to relocation. Iisdpjxzp H Tefx Agzek The xCUT is the ideal machine for customers requiring all-in-one label production. With the xCUT and a Memjet printer, it is possible to print, laminate, die-cut, and produce a finished label roll in a single pass. › Fully servo-controlled die-cutting unit › Digital printer can be integrated › High-precision re-registration › Integrated laminator The system die-cuts and laminates inline with a printing system at speeds of up to 12 meters per minute, or 28 meters per minute in rotary mode, making it suitable for higher volume jobs as well. Another benefit is that the die-cutting process is not decoupled from the printing process; both can be executed in a single operation. Although these machines may appear complex, they are significantly easier to operate compared to systems in the digital cutting segment. Unfortunately, the machine cannot be fully operated because the unwind unit is not functioning. We believe this could be resolved via a software adjustment, but since we do not have a support contact and the unit is not essential for our production, further effort is not worthwhile. The servo drive batteries should be replaced and the machine generally needs to be properly calibrated. A function test and demonstration can be arranged. We are happy to assist with shipping and disassembly. Die-plates in various formats, laminate, and label rolls are also included. Schematics / documentation folder available.

Condition: good (used), Year of construction: 1988, Bobst SP 102 CER Max. sheet size: 720x1020 mm Min. sheet size: 350x400 mm Iiodoxuqbljpfx Agzjk Year: 1988 Max. speed: 8,000 sheets/h Max. cutting force: 250 t Centerline Quicklock system Non-stop in delivery

Year of construction: 1973, condition: good (used), functionality: fully functional, BOBST AUTOMATIC DIE-CUTTING MACHINE • TYPE : SP 1260 EGC • SIZE : 92 x 126 cm • YEAR : 1973 • LOCATION : TÜRKIYE DETAILS: With chases and frames In a good condition Iiodpfx Ajvy Thvogzsk Can be seen in our warehouse in Istanbul Available immediately

Condition: new, Die cutting machine ML-1800 NXL Brand new machine. This is the heaviest die in this format. Format: 1800 × 1280 mm Weight: 12,500 kg 380 V power supply Engine: 11 kW Equipment: – pneumatic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – pneumatic sheet lifting system on the clamp – additional safety guards and pressure safety mats – operating tools and instructions with CE documentation. The machine is available „on the spot” Iodpfx Agou Ul Tzjzeik We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Poland. Possibility of testing in the showroom in Radom.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 52EHD146827, Hello, We are selling a Kluge platen press. This machine is capable of hot foil stamping, die-cutting, embossing, and debossing on paper and board up to over 3 mm thick. Maximum sheet size with automatic feeder: 356 x 559 mm Without feeder: 431 x 628 mm The machine is in perfect working condition and remains in daily production. The heating plate is new (worth €5,000). Iijdpfx Agow Udy Nezsk Kluge is still in operation as a company and can provide comprehensive training if needed. Feel free to contact me for more information.

Condition: new, Year of construction: 2024, functionality: fully functional, DGM AUTOMATIC DIE CUTTING MACHINE • TYPE : TECHNOCUT 1050-S (with STRIPPING UNIT) • SIZE : 74 x 105 cm • YEAR : 2024 (BRAND NEW) Details : Carton board min. =80 g/m2 Carton board max. =2000 g/m2 Corrugated board max. =4 mm Sheet size min. =350 x 400 mm Iiodpfswff Spsx Agzok Sheet size min. =740 x 1050 mm Speed =7500 s/h Cutting force =300 Ton Cutting size max. =730 x 1040 mm Gripper margin min. =9.5 mm Feeder =1600 mm Delivery =1300 mm

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure Iiodpfx Agjwxtcpszjk

Condition: new, Die cutting machine ML-2000 NXL The machine is brand new. It is the heaviest weightlifting machine in this format. Format: 2000 × 1400 mm Weight: 14000 kg 380 V power supply Engine: 15 kW Equipment: – pneumatic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – pneumatic lifting system of the sheet on the pressure – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” Iiodpfsu Ul Tuox Agzek We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in Europe.

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Isdowxtb Eepfx Agzjik Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening Ijdpsw D E Rvofx Agzsik – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Condition: good (used), ML-800 NXL Die-Cutting Machine This machine is used to cut shapes from a mold (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is in perfect condition, manufactured in 2018. First installed in 2020. This is the heaviest die-cutting machine in this format, precise. Format: 830 x 560 mm Weight: 2500 kg Power supply: 380 V Motor: 2.5 kW Equipment: Iijdpjxzul Iefx Agzok – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, and manual – Centralized pressure lubrication – Additional safety guards – Operating tools and instructions with CE documentation.

Year of construction: 2025, condition: new, Die-cutting machine ML-1200 NXL Brand new machine. This is the strongest die cutter in this format. Format: 1230 × 850 mm Weight: 5500 kg 380 V power supply Isdpfxeumuxxe Agzeik Engine: 5.5 kW Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – additional safety covers – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Europe. Possibility of testing in the showroom in Radom.

Condition: good (used), Adast Grafopress GPE letterpress machine Iiodpfx Aov E A U Njgzsk Very good condition, ready for production, after inspection. The machine has all the safety features. Export version. The equipment includes printing rollers. The device is used for die cutting, printing, creasing, numbering, etc.

Condition: good (used), Cauhe IVA 120×160 die-cutter The machine is fully functional, like new. Made in Spain. Format: 1200x1600mm Iiodpfxjwq Dw Ie Agzsk Weight 10,000kg Power supply 380V Installed power 11 kW Impact force 2 Tm/dm2 Year of production 2015. Equipment: – pneumatic clutch and brake – control panel – quick assembly frame – 3 operating modes: continuous, with time delay, manual – central automatic lubrication – additional safety guards – operating tools – sheet metal for pressure