Used Diesel Standby Generator for sale (16,718)

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 565 kg, fuel type: diesel, tank capacity: 38 l, color: beige, power: 12.06 kW (16.40 HP), output current: 21 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.6 kW (15.77 HP), nominal power (apparent): 15 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,850 mm, total width: 850 mm, total height: 900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, AKSA AP 15 Perkins Hsdpfx Afowu Dbuo Aefk PRP output: 10.4 kW / 13 kVA ESP output: 11.6 kW / 14.5 kVA Engine: Perkins 403A-15G1 Emission level: Stage 2 Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford or equivalent Voltage: 400/231 V Voltage regulator: AS540 Control panel: DSE 6120 – emergency automatic start Battery charger: 5 ampere Type: Canopy unit; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame construction with integrated fuel tank (38 L) and vibration dampers Coolant preheating Voltage and frequency regulation according to ISO 8528-5 Unit suitable for stationary use only Please note that, in accordance with the applicable EU regulation, these units are not approved for mobile use. The units are sold as B-stock. B-stock means the units may show cosmetic defects such as minor rust, or rust on the housing. These defects do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and the associated condition of the units.

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 Hedpfx Aex U Tgmof Aofk The unit looks as good as new. The system was only in operation for a short period.

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: MN 141360, Offer for Sale – FillMatic MSE 220R We are offering for sale a FillMatic MSE 220R mattress core stacker, a fully functional machine ready for immediate operation after connection. The equipment is intended for gluing mattress cores and ensures their automatic stacking at the end of the production line. Location: Slovakia – Oravské Veselé 02962 Basic Technical Data: • Machine No.: MN 141360 • Machine type: SRA 200 • Power: 4.8 kW • Voltage: 400 V • Year of manufacture: 2014 Machine Description: The FillMatic MSE machine serves as a mattress core stacker. Hfsdpoxgd Hfofx Af Ask • It is designed to prevent damage to still-fresh adhesive seams during handling – an ideal solution for placement directly after the gluing section of the line. • Allows stacking to an adjustable height, with access from three sides depending on the safety guarding configuration. • The FillMatic MSE designation refers to a series of stacking or folding machines that can be combined or customized according to production requirements. This specific model is a combined version – a mattress core gluer with end-of-line stacking, making it suitable for efficient production and labor savings. The equipment is in good technical condition and ready for immediate deployment in your production process. For more details or if you are interested, please do not hesitate to contact us.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 487965, Year of construction: 2015, operating hours: 7,430 h, load capacity: 2,500 kg, lifting height: 4,800 mm, fuel type: diesel, mast type: duplex, fork length: 1,190 mm, TECHNICAL DETAILS Lifting height: 4,800 mm Lifting capacity: 2,500 kg Fork length: 1,190 mm Hjdpfx Aezrmrhjf Aofk Maximum fork width: 1,060 mm Minimum fork width: 250 mm MACHINE DETAILS Mast type: Duplex Fuel type: Diesel Operating hours: 7,430 h Dimensions and weight Dimensions (L x W x H): 2,700 x 1,180 x 3,150 mm Unladen weight: 3,853 kg EQUIPMENT Side shift Work light Partial cabin Documentation CE marking

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, wheel diameter: 700 mm, gear diameter: 1,000 mm, wheel width: 152 mm, workpiece spindle speed (max.): 67 rpm, feed length X-axis: 610 mm, feed length Y-axis: 610 mm, feed length Z-axis: 725 mm, pivoting range: 95 °, spindle bore: 203 mm, travel distance X-axis: 610 mm, travel distance Z-axis: 725 mm, Equipment: rotational speed infinitely variable, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Hsdpfjxaqa Ssx Af Aefk Weight: 65,000 lbs., 29,484 kg

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 25582, Equipped with: Fanuc 30ia Control Hydraulic System Coolant System Chip Conveyor Pneumatics Lube System Jib Crane Change Gears Mist Collector Transformer Work Light Stack Light Specifications: Extreme Ratio: 10:1 Root Angle Range (B-Axis): -5 deg. TO 90 deg. Equivalent Root Angle Range: -8 deg. to 90 deg. (Equivalent refers to cradle type machine.) Face Hobbing: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -152 mm TRI-AC Cutter w/13 Blade Groups Max. Full Depth: 0.550" Max. Face Width: 1.6" Face Milling: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -7.5" Diameter Cutter Max. Full Depth: 0.625" Max. Face Width: 1.6" Max. Swinging Base Travel (B-Axis): -5 deg. to 90 deg. Max. Vertical Travel (Y-Axis): -4" to 7" Max. Horizontal Travel (X-Axis): -6" to 4" Sliding Base Travel (Z-Axis): 2" to 12" Machine Center to Work Spindle Face (Fixed): 4.5" Tooth Number: 5 to 200 Inclusive Cutting Diameters: Conventional Face Milling: 1.1" to 7.5" Helixact: 100mm to 200mm Fine Pitch: 102mm to 152mm Hfedpfx Afszn Ayms Aok Coarse Pitch: 152mm only Speeds: B-Axis--Swinging Base (Degrees per Second): 30deg./sec. A-Axis--Work Spindle (Face Milling)(RPM): 0-75 A-Axis--Work Spindle (Face Hobbing)(RPM): 0-375 C-Axis--Cutter Spindle (RPM): 30-500 X-Axis--Horizontal (Inches per Second): 4.92"/sec. Y-Axis--Vertical (Inches per Second): 4.92" Z-Axis--Sliding Base (Inches per Second): 4.92"/sec. Work Spindle: Diameter of Taper at Large End (#39 Taper): 3-29/32" Taper per Foot: 39/64" Depth of Taper: 3" Floor Space: 95.75" x 63.5" Height (less mist collector): 90.75" Approx. Weight: 22,000 lbs

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Hodpfx Ajruakgef Asfk Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Hedpexdfazsfx Af Aefk Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Hsdjxdfa Uepfx Af Aefk Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Hsdpfx Afortrykj Aofk Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 4,133 h, load capacity: 16,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 4,200 mm, drive type: Diesel, Diesel forklift Mast type: Standard Hfodpfxozuqdyo Af Aek Condition: Ready for use and fully functional Technical condition: good Sideshift, fork positioner, 3rd valve, 4th valve, heating, full cab,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 425 h, load capacity: 2,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 2,650 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Transmission: Hydrostatic Condition: Like new Technical condition: very good Hfodpezup Nhjfx Af Ajk Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Description: Price includes a new UVV inspection. The unit is in like-new condition, reflecting its low operating hours. We will gladly arrange cost-effective transport for you. A lease-to-own option is generally available. We are an official Jungheinrich partner. Side shifter, 3rd valve, rear work light, front work light, half cab, load guard, CE certificate.

Condition: used, Volvo Penta TWD1210G Diesel Emergency Generator Set Stationary diesel emergency generator set with a Volvo Penta diesel engine, generator, and separate control system for emergency power operation. Engine manufacturer: Volvo Penta Engine type: TWD1210G Engine specification: 868372 Engine serial number: 2120255427 Fuel: Diesel Engine power: 294 kW / 400 hp Rated speed: 1,500 rpm Number of cylinders: 6 Hodpfxszupy Tj Af Aofk Cylinder arrangement: Inline Displacement: 11.98 l Bore: 130.2 mm Stroke: 150 mm Supercharging: Turbocharger Generator: included Location: Cologne

Condition: used, Year of construction: 2008, Diesel emergency power generator from NTC Notstrom-Technik-Clasen with a rated power of 800 kVA. Equipped with a MAN D2842 LE213 V12 diesel engine, a separate diesel tank, and system control. Manufacturer: NTC Notstrom-Technik-Clasen GmbH Generator type: D 800-4W NC Year of manufacture: 2008 Rated power PRP: 800 kVA Rated power factor: 0.8 Rated voltage: 400/231 V Rated current: 1,155 A Rated frequency: 50 Hz Maximum ambient temperature: 40 °C Maximum installation altitude above sea level: 400 m Generator weight: 13,000 kg Hjdpezupy Hsfx Af Ajfk Fuel: Diesel Engine manufacturer: MAN Engine type: D2842 LE213 Engine year of manufacture: 2007 Engine power: 702 kW Rated engine speed: 1,500 rpm Engine design: V12 diesel engine Number of cylinders: 12 Displacement: 21.927 l Bore: 128 mm Stroke: 142 mm Supercharging: Turbocharger with charge air cooling Cooling: Water cooling Diesel tank manufacturer: Martin Adam GmbH Tank capacity: 1,500 l Tank test pressure: 0.2 bar Permissible density of tank contents: 0.91 kg/l System control: Control cabinet with mains and generator monitoring Battery system: present

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 15,617 h, load capacity: 8,000 kg, lifting height: 2,700 mm, fuel type: diesel, mast type: simplex, construction height: 2,840 mm, fork carriage width: 2,000 mm, fork length: 2,400 mm, empty load weight: 12,400 kg, total length: 4,150 mm, drive type: Diesel, construction width: 2,000 mm, Diesel Forklift Load Center: 900 mm Fork Width: 150 mm Fork Thickness: 70 mm Mast Type: Standard Condition: Ready for use and fully functional Technical Condition: Very good Front Tires Type: Super elastic Front Tires Size: 8.25-15 Rear Tires Type: Super elastic Rear Tires Size: 8.25-15 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-purchase and financing at attractive conditions are always possible. We are also happy to purchase your used forklift outright, even if you don’t buy a machine from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice regarding this DCG80-9. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons and above. We are also happy to offer your vehicle on consignment at our premises. Side shifter, fork positioner, Hjdpfxswacg To Af Asfk Heater, full cabin,

Condition: used, Year of construction: 2007, fuel type: diesel, weight max. 4,5 t height of stroke 5000 mm fork length / mm Hsdey S D Dqopfx Af Aefk

Condition: used, rated capacity 265 kVA capacity in kVA 320 kVA Heating capacity / kW power fuel Diesel required space 3,25x1,14x1,7 m Hfsdjuddfhspfx Af Aok Diesel emergency generator generator 10 cylinders MAN D2530MT E Engine number: 43036630914101 Siemens engine Type: 1FC352 B5/B20 IP23

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 1,142 h, load capacity: 5,000 kg, lifting height: 4,150 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 60 - 80% Hodpfx Aszup Iqef Aofk 3rd valve, 4th valve, rear work light, front work light, heater, compliant with STVZO (German Road Traffic Licensing Regulations), full cabin, full free lift, dual tires, safety light, rotating beacon.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 6,363 h, load capacity: 2,500 kg, lifting height: 3,150 mm, fuel type: diesel, mast type: duplex, construction height: 2,200 mm, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Hfedpfx Aozt D Nmef Ajk Rear tire type: Superelastic 3rd valve, rear work light, front work light, heater, full cabin, air conditioning, interior mirror, rotating beacon, plastic seat cushion, clipboard with LED lighting, dust protection, double pedal.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3,633 h, load capacity: 3,500 kg, lifting height: 3,995 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,674 mm, empty load weight: 4,262 kg, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Load protection grid, side shifter, 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, full cabin, interior mirror, Hsdpfszt D Nasx Af Asfk plastic seat cushion, Linde Connect, dust protection, double pedal

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,844 h, load capacity: 3,000 kg, lifting height: 4,655 mm, free lift: 1,424 mm, fuel type: diesel, mast type: triplex, construction height: 2,191 mm, fork carriage width: 1,150 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic 3rd valve, work light (rear), work light (front), heater, full cabin, interior mirror, plastic seat cushion, dust protection, double pedal Hedpfeydf Sfjx Af Ajfk

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 3,194 h, load capacity: 3,000 kg, lifting height: 4,655 mm, free lift: 1,424 mm, fuel type: diesel, mast type: triplex, construction height: 2,191 mm, fork carriage width: 1,300 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Hodpszhp Scsfx Af Aofk Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic 3rd valve, 4th valve, front work light, heater, soot filter, compliant with STVZO (German Road Traffic Licensing Regulations), full cab, air conditioning, interior mirror, rotating beacon, roof guard, plastic seat cushion, BlueSpot front, double pedal

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 5,757 h, load capacity: 3,000 kg, lifting height: 4,655 mm, free lift: 1,424 mm, fuel type: diesel, mast type: triplex, construction height: 2,191 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Hsdpfoyb Ut Hsx Af Ajfk Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, interior mirror, plastic seat cushion, single pedal.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 6,621 h, load capacity: 8,000 kg, lifting height: 3,750 mm, fuel type: diesel, mast type: simplex, drive type: Diesel, Diesel forklift Mast type: Standard Hsdpfxjzt D Ivo Af Aefk Condition: Ready for operation and fully functional Technical condition: Good 3rd valve, heating, particulate filter, full cab, air conditioning,

Condition: used, functionality: fully functional, Year of construction: 2000, operating hours: 7,278 h, load capacity: 4,500 kg, lifting height: 3,200 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,400 mm, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Standard Technical condition: good Front tire type: Superelastic Front tire condition: 60 - 80% Hfsdpfxozuhhis Af Aek Rear tire type: Superelastic Rear tire condition: 60 - 80% Heater, soot filter, full cabin