Used Dmg Dmc 60 H for sale (385)

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 63V was manufactured in 2003. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a 24-position tool magazine and a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 63V vertical machining center we have for sale. Contact us for further details. • Table size: 800 x 500 mm • Network connection: Interface available for file transfer from computer network Fodpfszdt Akex Al Usgh • Tool measurement: Tool probe installed • Workpiece measurement: Workpiece probing Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2020, operating hours: 20,292 h, spindle speed (max.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Z-axis: 1,240 mm, spindle motor power: 33,000 W, overall weight: 7,200 kg, controller manufacturer: SIEMENS, controller model: Siemens 840D with ShopTurn, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG MORI CLX 550 V3 was manufactured in 2020. It features a maximum turning diameter of 480 mm and a turning length of 1240 mm. The machine is equipped with a 12-position VDI 40 turret and a maximum spindle speed of 3250 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V3 horizontal turning machine we have for sale. Contact us for further details. • Control panel: DMG MORI SLIMline Multi-Touch, 19-inch touchscreen • Controlled axes: 3 (X, Z, C) Fjdpfx Alsz Ipawj Usgh • Spindle operating hours: approx. 20,292 hWorking capacity and axes • Max turning diameter: 480 mm • Max turning length: 1,240 mm • Swing over bed: 700 mm • Swing over cross slide: 500 mm • Rapid traverse X/Z: 30 m/min • Main spindle C-axisMain spindle and chuck • Spindle nose: A2-8 • Upgraded bar capacity: 102 mm • Spindle power: 33 kW @ 40% / 22 kW continuous • Spindle torque: 630 Nm @ 40% / 420 Nm continuous • Hydraulic chuck: SMW BH-D 320 / A2-8, D103 mm • Differential clamping pressure functionTool turret and driven tools • Turret: 12-position VDI 40 with 6 additional BT stations • Driven tools: yes • Max driven-tool speed: 4,000 rpm • Driven-tool power: 5.44 kW @ 40% • Driven-tool torque: 20 Nm @ 40%Tailstock • Tailstock travel: 1,200 mm • Centre taper: MT5 • Max thrust: 12 kNEquipment and options • Setup package • Tropical climate package • 12-bar coolant supply system • Manual working-area washdown gun • Variable spindle speed function • DMG MORI Service Agent • DMG MORI Messenger V2 • DMG MORI NETservice • DMG MORI IoTconnector • Screen languages: German/PolishConstruction • Inclined cast-iron bed • Linear guideways, width 45 mm Additional equipment • Mechanical oil mist extraction unit, 1,100 m³/h • WTO VDI 40 driven-tool holder set • Set of three soft jaws for BH-D315 chuck Technical Specification Counter Spindle No Driven Tools Yes

Year of construction: 2016, condition: ready for operation (used), A Fanuc/DMG Mori robot handling system for CNC machines that was used with a CTX is available. Robot type: Fanuc M-20iA, Gripper 1: double gripper, Gripper 2: shaft gripper, max. workpiece weight in single-gripper operation/double-gripper operation: 10kg/2x5kg, max. workpiece diameter: 125mm, weight: approx. 1075kg. Including various storage stations and safety enclosure. Documentation available. An on-site inspection is possible. Fgjdpfxozcfk Ss Al Uoh

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 845000756E, turning diameter: 400 mm, spindle bore: 103 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 265 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,050 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,400 mm, total length: 6,000 mm, total width: 2,400 mm, overall weight: 8,000 kg, bar passage: 90 mm, center height: 360 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, nominal power (apparent): 50 kVA, operating hours of spindle: 4,617 h, Equipment: documentation/manual, DMG MORI ECOTURN 510 CNC lathe - Chuck diameter: 250 mm - Diameter in the front bearing: 140 mm - Feed drive in the X and Z axes: 40 x 10 mm - Feed forces X/Z: 7.5 kN - Y-axis feed force: 7000 N - Rapid traverse C1 axis: 100 m/min - Travel measuring system X/Y/Z: absolute rotary - Positioning uncertainty X: 0.008 mm, Z: 0.010 mm - Working area, distance between centers: 1150 mm Fgedpfx Ajzxzc Ijl Ush - Max. swivel range above the bed: 680 mm - Swivel range above the X slide: 465 mm - Travel of the Y-axis: 120 mm (+/- 60 mm) The machine is equipped with a tailstock and a 12-position tool turret, including the tool holders located in the turret, as well as a three-jaw chuck SMW AUTOBLOK, diameter: 300 mm, including a chip conveyor, filter extraction, and documentation. FCA D-73529 Schwäbisch Gmünd - to be loaded onto a truck.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, total height: 2,755 mm, total width: 3,565 mm, table load: 300 kg, overall weight: 4,650 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 32,000 W, number of slots in tool magazine: 60, product length (max.): 3,765 mm, number of axes: 5, This 5-axis DMG MORI DMU 50 3rd gen was manufactured in 2017. It features impressive axis travels of 650 x 520 x 475 mm and a maximum spindle speed of 15,000 rpm. The machine includes a tool magazine capacity of 60 positions and a robust table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 50 3rd gen vertical machining centre we have for sale. Contact us for further details. • B-axis travel: -35° / +110° • C-axis travel: ±360° • Table diameter: 630 mm • Machine working footprint: approx. 7.0 x 5.75 x 2.76 m • Transport dimensions (L x W x H) – Machine: 3.765 x 3.565 x 2.755 m • Operating hours: 42,253 hours (under power) / 21,241 hours (spindle cutting time) Additional equipment • Heidenhain TS 649 tool probe • Blum laser tool measurement system • Vises • Chip conveyor (transport dimensions: 3.2 x 1.396 x 1.29 m) • Internal cooling system/unit (transport dimensions: 1.525 x 1.205 x 1.6 m) Technical Specification Fedpfx Alsz Du Dyo Uegh Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DMG MORI CMX 600V was manufactured in 2017. It features a spindle speed range of 12,000 rpm and a spindle motor power of 13 kW. The machine offers an X-axis travel of 600 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm, along with a table size of 900 x 560 mm. If you are looking to get high-quality milling capabilities, consider the DMG MORI CMX 600V vertical machining centre we have for sale. Contact us for further details. Fjdpfszh H Etox Al Uegh • Rapid traverse (X/Y/Z): 30 m/min • Table: 900 x 560 mm • Tools: • Tool changer positions: 30 • Machine hours: 250 cutting hours • Condition: like new

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 00320002700, spindle bore: 91 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 307 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, total height: 2,500 mm, total length: 6,000 mm, total width: 2,200 mm, overall weight: 8,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, input voltage: 400 V, input frequency: 50 Hz, input current: 99 A, workpiece length (max.): 1,225 mm, nominal power (apparent): 65 kVA, workpiece diameter (max.): 480 mm, workpiece weight between centers: 500 g, operating hours of spindle: 1,103 h, Equipment: chip conveyor, documentation/manual, DMG MORI CLX 550 CNC lathe - Bed inclination: 45° - Bed diameter: 700 mm - Max. slide diameter V1 to V3: 500 mm - Max. workpiece diameter: 480 mm, in the front workpiece diameter: 320 mm - Distance between centers: 1450 mm - Y-axis travel: 120 mm (+- 60 mm) - Z3-axis travel: 1200 mm - Spindle height from axis to ground: 1043 mm - Main spindle, bar capacity: 80 mm - Bar diameter: 81 mm - Front bearing diameter: 130 mm - Resolution axis C1: 0.001° Fgsdpfx Alezxy R Re Ush - The machine has a tailstock - Distance between two spindle centers: 1495 mm - Z1 axis travel: 1200 mm - Max. workpiece length: 1140 mm - Max. workpiece diameter: 450 mm - Bar capacity of the tailstock: 50 mm - Bore diameter of the tailstock: 73 mm - Bar diameter: 52 mm The machine is equipped with a tailstock (fitted with a three-jaw chuck SMW AUTOBLOK, diameter: 210 mm), as well as a 12-position tool turret, including powered tool stations, and an SMW AUTOBLOK three-jaw chuck, diameter: 250 mm. It also includes a chip conveyor, filter extraction, and documentation and CDs. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck

Condition: ready for operation (used), Year of construction: 2016, number of axes: 3, This 3-axis DMG MORI CMX 600 V was manufactured in 2016, featuring a 4th axis rotary table preparation, Siemens 840D control, and SK40 spindle. It includes advanced probing systems for both workpiece and tools, ensuring precision. Ideal for those looking to enhance their machining capabilities with reliable equipment. Contact us for more information about this machine. • Basic machine with main‑drive options • Preparation for rotary table (4th axis), EA 510L (rotary table itself not included) • Safety measuring system for X/Y/Z axes • Signal lamp, 4‑colour standard • PROGRESSLine & Planolight • Signs language: Hungarian Fgodpfxsx D Di Uo Al Ueh • Screen text: German/Hungarian • Documentation: Doc 1 & Doc 2 (HU); Electrical circuit diagram (DE) • Misc.: Preparation for machine handover; internal rebuild unit ID 34; inspection & preparation noted Additional equipment • Chip conveyor with ICS (internal coolant) + chip tank (Production Package 1) • Workpiece probing system TS 649 (on table) • Tool probing system TT140 • Lamp inside tool magazine • Tool loading through magazine door • Platform/foil machine base • NetService remote service (ID 2632226)

Condition: ready for operation (used), A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible. Fgjdex Ivkzepfx Al Ueh

Condition: ready for operation (used), Year of construction: 2006, operating hours: 17,450 h, travel distance X-axis: 835 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 840D with ShopMill, table width: 560 mm, table length: 1,000 mm, table load: 800 kg, overall weight: 4,200 kg, number of axes: 4, This 4-axis DMG DECKEL MAHO DMC 835V was manufactured in 2006. Ideal for precision vertical machining, this used machine maintains robust functionality despite its years. Consider the opportunity to buy this DMG DECKEL MAHO DMC 835V vertical machining centre. Contact us for more information. Additional equipment • Linear Encoder Measuring System • A-axis • Electronic Handwheel • Internal Coolant – 25 bar / 30 l/min • Cabin Roof • New Spindle Bearings Fodpfx Asyrd Hwjl Usgh Machine Benefits Technical Machine Benefits • Tool mountings: sk 40 Extra Information Machine still under power Dimensions Machine Depth 2100 mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 36,012 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 510 mm, controller model: 3D Heidenhain i TNC 530, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 635 mm Travel range, Y-axis: 460 mm Travel range, Z-axis: 510 mm Spindle speed range: 20 - 10,000 rpm Table dimensions: 790 x 560 mm Table load capacity: 600 kg Tool holder: SK 40 Number of tool magazine slots: 20 MACHINE DETAILS Control system: 3D Heidenhain i TNC 530 Total power consumption: 13.9 kW Fgjdpfx Aljzb Dzms Ujh Operating hours (according to counter) Spindle hours: 36,050 h Power-on hours: 91,000 h Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,000 x 2,150 mm Machine weight: 3.6 t

Condition: used, CNC Turning and Machining Cente: Gildemeister/DMG Mori CTX2500/700 Year: 2019 Fodpfx Ajzwn Sgel Uegh Serial No.: 02620000651 2 driven spindles, rated speed 4,000/5,000 rpm, net weight 6,360 kg, accumulated operating hours 44,087 h, spindle hours: 27,832 h, cooling unit, chip conveyor, coolant treatment system, control system model: Ergoline, tool turret, 14 positions, for driven tools

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, operating hours: 2,900 h, table length: 1,400 mm, table width: 560 mm, feed length X-axis: 1,100 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, Equipment: documentation/manual, The machine is in very good condition and was purchased new from DMG Pleszew. It was bought to carry out an EU-funded project, as we specialize in building prototypes and are not a company involved in mass production. The machine is in 100% working order. It can be inspected on-site, and tests can be performed, along with training on its operation. We are selling the machine because we have two units and want to replace one with a 5-axis machine. Additionally included in the package: - Renishaw measuring probes for parts and tools - Precision vice (jaws 150mm), length 350 mm - 8 tool sets with SK40 tool holders Operating hours: 2900 h Fjdeq E Ivpspfx Al Uogh Control system: Heidenhain TNC 620 The machine is ready for operation. In August, the set of wipers and a package of basic consumables such as filters and belts were replaced. Price negotiable.

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 450 mm, overall weight: 3,950 kg, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2006. This DMG GILDEMEISTER CTX 310 features a maximum spindle speed of 6000 rpm and a tool turret with 12 stations. With a power capacity of 24 kVA, this machine is designed for efficient performance. If you are looking to get high-quality turning capabilities, consider the DMG GILDEMEISTER CTX 310 machine we have for sale. Contact us for further details. Fgjdpfx Aljzh E Ako Ujh - Total Power On Hours (Counter 1): 21887.4 h- Spindle/Run Hours (Counter 2): 11066.2 h- Power Capacity: 24 kVA- Max Current: 35 A (Jn max) / 38 A- Voltage: 400 V- Frequency: 50/60 Hz- Control Voltage: 24 V Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,779 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 362 mm, travel distance Z-axis: 1,250 mm, spindle motor power: 28,000 W, overall weight: 6,000 kg, controller manufacturer: SIEMENS, controller model: 840D SL, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG NEF 600 was manufactured in 2012. It features a turning length of 1200 mm and a powerful integrated spindle motor with a maximum spindle speed of 3500 rpm. The machine includes a 12-station disc turret and live tooling capabilities for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG NEF 600 horizontal turning machine we have for sale. Contact us for further details. • Turning length: 1200 mm • Main spindle: Integrated spindle motor • Turret: 12-station disc turret • Tool holder standard: VDI 40 • C-axis brake: Hydraulic • Tailstock: Automatic • Coolant system: Coolant equipment with chip pan • Operating software: ShopTurn • Control panel: ERGOline operating panel • CAD reader: External PC compatible • Hydraulic unit: Included for clamping device and steady rest • Hollow clamping device: Hydraulic • Max draw tube diameter: 95 mm • Coolant spray gun: Included • Chip conveyor: Right side discharge • Chip conveyor discharge height: 1250 mm • Steady rest type: Self-centering steady rest • Steady rest range: Ø 50–200 mm Fedsy Twc Nepfx Al Ujgh • Chuck type: 3-jaw power chuck • Chuck model: ROTA-NCK plus • the chuck has a diameter of 325 mm + is included • Tool spindle 1: Angled 90° live tool holder • Tool spindle 2: Straight 0° live tool holder • Tool spindle application: Drilling, milling and tapping • Tool holder shaft standard: DIN 69880-40 • Electrical cabinet cooling unit: Up to 40°C • DMG Netservice onboard: Installed OPTIONAL approximately 100 different tool holders (VDI holders) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Fgjdpfozy Hx Dox Al Ush Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Condition: ready for operation (used), Year of construction: 2009, operating hours: 16,616 h, travel distance X-axis: 120 mm, spindle speed (max.): 36,000 rpm, number of axes: 5, This 5-axis DMG Sauer Ultrasonic 10 + PH 2 | 120 was manufactured in 2009. It features a main drive speed of 40,000 rpm and an output performance of 6 kW. The machine operates efficiently with a cooling system and has a protection type of IP 54. If you are looking to get high-quality ultrasonic machining capabilities, consider the DMG Sauer Ultrasonic 10 + PH 2 | 120 vertical machining centre we have for sale. Contact us for further details. • Manufacturer: SAUER GmbH Ultrasonic • Component: Main Drive, 40,000 rpm • Operational mode: S1 • Speed 1: 36,000 rpm • Speed 2: 42,000 rpm • Output performance 1: 6 kW • Output performance 2: 6 kW • Torque 1: 1.7 Nm • Torque 2: 1.3 Nm • Voltage 1: 400 V • Voltage 2: 420 V • Current 1: 10 A • Current 2: 9 A • Frequency 1: 1,200 Hz • Frequency 2: 1,400 Hz • Connection: Star • Protection type: IP54 • Vibration quality: < 1 mm/s • Cooling: Water • Rotor moment of inertia: 0.000252 kg·m² • Insulation class: F • Connection diagram: 635 • Max. ambient temperature: 40 °C Fgsdpsy Hhwkefx Al Ush • Thermal protection: KTY 84-130 and PTC

Condition: good (used), Year of construction: 2007, Universal machining center Fgsdsz Dkunjpfx Al Ueh Machine type: DMG DMU 80 P duoBLOCK Control: Heidenhain iTNC 530 Year: 2007 SPECIFICATIONS 5-axis-simultaneous Travel X-Axis: 800 mm Y-Axis: 800 mm Z-Axis: 800 mm B-Axes C-Axis Panning head Rapid motion: (X/Y/Z): 60 m/min. Spindle speeds: 12.000 rpm Spindle power: 28 / 19 kW Tool: SK 40 Toolchanger Tool capacity: 60 NC rotary table Table size: 900 x 700 mm Max. Table Load: 1.400 kg Equipment Internal cooling: bar Chip conveyor Electronical handwheel

Condition: good (used), Year of construction: 2012, CNC Turning / Millingcenter Machine type: DMG CTX beta 500 V6 Control: Siemens 840 D Shopturn Year: 2012 Working hours: 42.067 h Spindle running time: 20.209 h SPECIFICATIONS Max. turning length: 500 mm Turningdiameter: 410 mm Max. swing over bed: 700 mm Spindle bore: 87 mm Bar capacity: 77 mm C-Axis: 0,01° Fedpfx Aloz D Ug Ie Usgh Main Spindle: ISM 76 Max. revolution: 5.000 rpm Spindle power: 25 / 34 kW Torque: 280 Nm Collet chuck: Hainbuch Spantop Nova 65 Subspindle: ISM 52 Max. revolution: 5.000 rpm 3-jaw chuck: Berg KHL 200 mm Travel Y-Axis: mm Amount of turrets: 1 Tool: VDI 40 Driven Tools: 12 revolution driven tools: 4.000 drive power driven tools : 11,3 kW Equipment Chip conveyor Short Bar Loader: LNS QLS 80 S2 Direct linear scales: X,Y High pressure pumps Toggle filter Tool setter

Condition: ready for operation (used), Year of construction: 2018, operating hours: 1,821 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 242 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 540 mm, controller manufacturer: SIEMENS, controller model: SLIM Line, number of axes: 4, This 4-axis DMG MORI CLX 350 lathe was manufactured in 2018. It features a maximum workpiece diameter of 320 mm and a maximum machining length of 530 mm. The machine is equipped with a Siemens SLIM Line CNC and offers an X-axis travel of 242 mm, Y-axis travel of +/- 40 mm, and Z-axis travel of 540 mm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 350 lathe we have for sale. Contact us for further details. • Maximum workpiece diameter: 320 mm Fjdpfx Aszx A Ilel Uegh • Maximum machining length: 530 mm • Bar capacity: 65 mm • Spindle hours: 236 h • Maximum spindle speed: 5,000 rpm • Spindle power: 16.5 kW • Spindle torque: 168 Nm • Y-axis: ±40 mm • C-axis: Yes • Driven tools: Yes • Counter spindle: No • Hydraulic tailstock • 12-station VDI40 turret with driven tools • 15" SlimLine operator panel • Siemens SINUMERIK 840D SL CNC with ShopTurn • USB and Ethernet connectivity • SMW Autoblok BH-D 250/1220 hydraulic 3-jaw chuck • Chuck diameter: 250 mm • Chuck bore: 66 mm • Hard and soft jaw sets included • 12 VDI40 tool holders • 6 Block Tool boring bar holders with internal coolant • PROGRESSline & Planonlight functions, including cycle time display, remaining time display and parts counter • Chip conveyor: No Technical Specification Counter Spindle No Driven Tools Yes

Condition: like new (used), Year of construction: 2009, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, controller manufacturer: HEIDENHAIN iTNC530, workpiece weight (max.): 15 kg, table width: 200 mm, table length: 200 mm, spindle speed (min.): 42,000 rpm, Control CNC: HEIDENHAIN iTNC530 Fgsdjxpg H Hspfx Al Ush Axes X-axis travel mm: 200 Y-axis travel mm: 220 Z-axis travel mm: 280 C-axis degrees: 360º A-axis degrees: -15º max.130º Work Table Table dimensions mm: ø200 Maximum workpiece weight kg: 15 Spindle Spindle speed rpm: 42.000 Cooling Cooling through the spindle bar: 40 Tool System Tool holder: HSK-E32 Tool magazine slots: 60 Max. tool diameter mm: ø50 Max. tool length mm: 200 Chip-to-chip time s: 10 Equipment Automation LM100 (EROWA ITS72, 5 levels of 9 positions); 10 kg maximum manipulation Electronic handwheel Chip conveyor Infrared probe High-pressure pump NC rotary tilting table Rated power kVA: 40

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm Fedpfxew Hg Nlj Al Usgh * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.

Condition: good (used), Year of construction: 2003, CNC - lathe machine Machine type: DMG CTX 410 V1 Control: Heidenhain CNCPilot 4290 Year: 2003 Working hours: 11.080 h SPECIFICATIONS Max. swing over slide: 365 mm Turningdiameter: 420 mm Bar capacity: 67 mm Max. turning length: 600 mm Spindle speeds: 25 - 5.000 rpm Spindle power: 28 / 21 kW Travel X-Axis: 250 mm Z-Axis: 600 mm Tool capacity: 12 Tool: VDI 30 Tailstock Fgjdpfoz Dkt Rox Al Ueh Equipment Chip conveyor

Condition: used, Year of construction: 2008, turning diameter / mm centre distance / mm swing diameter / mm Manufacturer: DMG GILDEMEISTER Model: CTX 510 eco Year of manufacture: 2008 Machine type: CNC lathe / turning center Control system: Siemens SINUMERIK 810D Powerline Max. spindle speed: 3,250 rpm Spindle speed range: approx. 500–3,250 rpm Fgsdpezu A Uksfx Al Ush Spindle power: 33 kW at 40% duty cycle / 22 kW at 100% duty cycle Spindle torque: 630 Nm at 40% duty cycle / 420 Nm at 100% duty cycle X-axis travel: 300 mm Z-axis travel: 1,050 mm Max. turning diameter: 465 mm Max. swing / turning diameter: 680 mm Spindle bore / bar capacity: approx. 76–92 mm (depending on configuration) Front spindle diameter: 140 mm Turret: 12-station Driven tool speed: up to 4,000 rpm Driven tool power: approx. 8.4 kW Chuck: 250 mm or 315 mm Max. workpiece weight between centers: 350 kg Total power requirement: approx. 50 kVA Power supply: 400 V, 50/60 Hz Machine weight: 7,500 kg Incl. chip conveyor Note: All technical specifications are for guidance only and are subject to change. Actual machine data may vary due to different equipment variants and subsequent modifications. No warranty or guarantee is provided regarding the accuracy or completeness of the technical specifications. The specifications and actual condition of the offered machine are the sole determining factors.

Condition: good (used), Year of construction: 2009, CNC Turning / Millingcenter Fjdpfxjz D Ugze Al Usgh Machine type: DMG CTX Beta 800 V4 Control: Heidenhain 4290 Year: 2009 Available after: sofort / now SPECIFICATIONS Max. turning length: 800 mm Turningdiameter: 410 mm Max. swing over bed: 700 mm Bar capacity: 67 mm C-Axis Main Spindle Max. revolution: 5.000 rpm Spindle power: 34 / 25 kW Tailstock Travel X-Axis: 300 mm Y-Axis: 60 +/- mm Z-Axis: 800 mm Amount of turrets: 1 Tool capacity: 12 Tool: VDI 40 Driven Tools: 12 Equipment Chip conveyor High pressure pumps Collets: Schunk Chip rinsing pistol