CNC turn-mill center
DMG CTX gamma 1250 TC

Year of construction

2009

Condition

Used

Location

Germany

CNC turn-mill center DMG CTX gamma 1250 TC

Show map

Machine data

Machine type:: CNC turn-mill center

Manufacturer:: DMG

Model:: CTX gamma 1250 TC

Year of construction:: 2009

Condition:: ready for operation (used)

Functionality:: fully functional

Price & Location

Location:: Deutschland

Call

Details about the offer

Listing ID:: A19699561

Reference number:: 2013-E0498

Update:: 01.08.2025

Description

CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC
YOM: 2009, until 2011 showroom machine, from 2012 operating

The machine can be inspected by appointment in the factory under power.
Condition: Good (high accuracy), ready for immediate use.

Spindle hours (August 1st, 2025): 9.580 h

The heart of the machine is the integrated traveling column with turning
milling spindle and interpolating B-axis.

Machine basic data:
* Part hollow clamping device (hydraulic)
* C-axis
* Cross slide above with turning/milling spindle as motor spindle,
with hydraulic clamping in turning, tool holder: Capto C6
* Y-axis: +/- 200 mm
* B-axis: +/- 120°
* Disc-type tool magazine
* Absolute, direct measuring systems in X-, Y-, Z1-axis
* USB-interface, Ethernet interface

TECHNICAL SPECIFICATIONS:
* Control: Heidenhain CNC Pilot 4290, 3-D path control
TURN PLUS

Rsdow Hg Nlepfx Agzjl
Working area:
* Swing diameter over bed: 630 mm
* Turning diameter: 630 mm
* Spindle distance: 1.510 mm
* Bar diameter max.: 65 mm

Main drive I:
* Drive power (100% / 40% ED): 24 / 34 kW
* Speed range from - up to: - 5.000 rpm
* Speed of the C-axis: - 5.000 rpm

Turning/milling spindle:
* Tool holder: Capto C6
* Spindle speed: - 12.000 rpm
* Drive power (100% / 40% ED): 13.2 / 22 kW
* Torque (100% / 40% ED): 60 / 100 Nm

Tool magazine:
* Number of tools: 36

* Dimensions of the machine approx. (Width/Depth/Height):
6.860 x 4.220 x 2.530 mm
* Total weight of the machine approx.: 18,5 tons

EQUIPMENT:
* Well equipped …
* No steady rest available
* Documentation complete available.

Detailed technical data sheet and information on equipment available on request.

There is no guarantee for correctness and completeness of the technical details
and and accessories.

Seller

Last online: A week ago

Registered since: 2015

16 listings online

Call

Send inquiry

Telephone & Fax

+49 2173 ... show

Fax:

These listings may also fit your interest.

Listing

Tychy

8,417 km

Balancer
SCHENCKHM3BU

€28,000

fixed price plus VAT

Call

Listing

Contour measuring device Mitutoyo Contracer CV-2100M4

Chemnitz

8,031 km

Contour measuring device
MitutoyoContracer CV-2100M4

€12,000

EXW fixed price plus VAT

Call

Condition: good (used), Year of construction: 2018, functionality: fully functional, MITUTOYO Contracer CV-2100M4 contour measuring device Horizontal measuring range X = 100mm Vertical measuring range Z = 50mm Column travel range Z2 = 350mm Inclination +/- 45° Redpjvun Tpefx Agzel Dimensions (W, D, H) 745mm x 450mm x 885mm Total weight approx. 150kg Incl. PC system, Incl. cross table 218-001 Incl. rotating vice 2028-003

See details

Listing

Cylindrical grinding machine Studer S12 and S22

Estavayer

7,932 km

Cylindrical grinding machine
StuderS12 and S22

Call

Year of construction: 2014, condition: good (used), SYSTEM 2 - 2014 Redpeppv Rxefx Agzjl Serial number: 1006-0055 Model: S12 · Serial 1006-0055 - Year 2014 – Working hours 58366 · Chuck type ISO50/110 · 1st grinding wheel axis 7,5/12,5kW right-handed Ø73mm external grinding · 2nd grinding wheel axis Ø100 60000-1/min M16/17 7,5kW internal grinding Serial number: 1040-0134 Model: S22 · Serial 1040-0134 - Year 2014 - Working hours 58810 · Chuck type CM4/70, · Grinding wheel axis 7,5/12,5kW right-handed Ø73mm external grinding

See details

Listing

Clamping angle Boring mill angle Clamping 2500mm hoch bis 60t Teilegewicht

Weißenborn/Erzgebirge

8,054 km

Clamping angle Boring mill angle Clamping
2500mm hoch bis 60t Teilegewicht

Call

Listing

Planer-Type Milling M/C - Double Column NICOLAS CORREA RAPID 50

Lauchheim

8,007 km

Planer-Type Milling M/C - Double Column
NICOLAS CORREARAPID 50

Call

Condition: used, Year of construction: 2005, x-travel 5.000 mm y-travel 3.100 mm z-travel 1.200 mm Control HEIDENHAIN TNC 530 HSCI table surface area 5.000 x 2.000 mm T-slots 11 T - slots - width 22 mm table weight 30.000 Kg rapid traverse X-axis 20.000 mm/min rapid motion - y-axis 30.000 mm/min number of spindle speeds 6.000 U/min/rpm Spindle power 32 kW taper ISO Kegel ISO 50 distance between columns 2.800 mm Internal cooling system 20 bar weight of the machine ca. 65 t Rodpfsxcbiijx Agzsl dimensions of the machine ca. 15.100x6.200x6.250 mm Head UAD II positioning 0.1º / 0. 1º Speed ranges 2 Tool clamping Hydraulic Head 2 – Vertical mandril ATC positions 30 2 longitudinal chip conveyors 1 cross chip conveyor Portable handwheel Laser tool presetter

See details

Listing

Machining Center - Vertical MORI SEIKI NV 4000 DCG

Germany

7,694 km

Machining Center - Vertical
MORI SEIKINV 4000 DCG

Call

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 400 mm z-travel 400 mm control MSX 501 Mori Seiki table surface area 700 x 450 mm max. table load 350 kg number of T-slots 4 T-slot - width 18 mm Rsdsv Az Ucepfx Agzol T-slot - distance 100 mm Number of revolutions 12.000 U/min power capacity - main spindel 18,5 / 15 / 11 kW tool taper BT 40 max. Torque 110,5 Nm diameter of forward milling spindle bearing 70 rapid travel x/y/z 20.000 mm/min feed speeds 1 - 20.000 mm/min Tipp feed 15 Steps / 0 - 1.260 mm/min Number of Toolpositions in magazine 40 Pos. Max. mould width 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 8 kg change-time chip to chip 2,8 sec change-time tool to tool 1,0 sec total power requirement 34 kVA weight of the machine ca. 7,2 t dimensions of the machine ca. 2,8 x 3,0 x 2,9 m Machining Center Vertical MORI SEIKI - NV 4000 DCG - ca. 14.000 Operating-Hours

See details

Listing

Berlin

7,943 km

NC Milling Machine
HURON HURÈM 2006

Call

Listing

CNC Turning- and Milling Center DMG MORI NLX 2500 SY / 700

Oelde

7,700 km

CNC Turning- and Milling Center
DMG MORINLX 2500 SY / 700

Call

Condition: used, Year of construction: 2017, turning diameter max. 356 mm turning length 705 mm control M730 UM Mapps CELOS greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 80 (91) mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° Redpfx Agjxzk Ifozsl x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 4,2 kW total power requirement 41 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 4,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - C, Y-Axis - only 1.237h Spindle hours

See details

Listing

Machining Center - Universal DECKEL MAHO DMC 100 U duoBLOCK

Oelde

7,700 km

Machining Center - Universal
DECKEL MAHODMC 100 U duoBLOCK

Call

Condition: used, Year of construction: 2005, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.000 mm Control 840 D Siemens turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm Rjdswf Rgfopfx Agzjl tool taper HSK-A63 swivellable B: -30 / +180 ° swivle time 1,2 s numbers of pallets 2 size of pallet 1.000 x 800 mm max. workpiece weight 1.500 kg rotatable C: 360 ° number of toolpositions 180 pos. tool taper HSK-A63 total power requirement 78 kVA weight of the machine ca. 27,0 t dimensions of the machine ca. 8,0 x 7,0 x 3,4 m 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rotary (C-Axis) - pallet changer - 180-pos. tool-changer - WITHOUT zero point clamping system - WITHOUT RINGLER exhaust - WITHOUT tools

See details

Listing

Székesfehérvár

8,603 km

Machining center
MatsuuraLV-500

Call

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 132 h, functionality: fully functional, machine/vehicle number: 20731, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, nominal power (apparent): 35 kVA, controller manufacturer: Fanuc 31I, spindle speed (max.): 42,000 rpm, operating hours of spindle: 132 h, coolant supply: 20 bar, spindle motor power: 15 W, spindle nose: HSK E40, input voltage: 415 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The Machine is in perfect condition. Machining accuracy is +/-0.0015mm. (measured with zeiss micura) The machine is equipped with Renishaw OMP400 and BLUM Pico for workpiece and tool measuring. Repeating accuracy is +/-0.001 Rsdpfxjvcfi Do Agzsl High speed and high accuracy option on Fanuc. The Machine can be inspected under power.

See details

Advertise here