Used Dna Sequencer for sale (471)

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in Lsdpfxsul Efme Afzsrg high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: excellent (used), Year of construction: 2015, Specification: X/Y: 110m/min Z: 20m/min Working Field X: 3250mm Y: 1400mm (Passage 1600mm) Z: 125mm + 100mm for vacuum pods 21 vertical drilling spindles 6 horizontal drills in the X direction 4 horizontal drills in the Y direction Grooving saw swivelling in the X & Y direction 10/12Kw main routing spindle Torque support for carrying aggregates (aggregates can not be swivelled) 8 Position tool changer travelling within the support in X & Y direction (not suitable for aggregates) 2 position linear pick up tool changer suitable for aggregates Optimised processing sequence drilling/routing Ledeyar Rtepfx Afzerg Laser Pin for Vacuum pod positioning Automatic central lubrication Weeke quality pack Energy saving mode 400V 50hz CE

Condition: used, Perry is offering a high quality used Winkworth model ZX190-9 stainless steel mixer / extruder. Ljdpfxjyanxgs Afzerg Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel wing blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. This unit is ready to run. A video of this mixer is available below.

Condition: excellent (used), Year of construction: 2012, Ref:11059 . 2012 MBO T800/444-RU Folding Machine. Max. sheet size: 82 x 115 cm 16 page+ B1 high speed folding machine with ability to be run by single operator. Equipped with: R800 Round pile continuous feeder Vacu-Infeed for mark free and smooth sheet running Vacu-Alignment MC-Control electronic sheet monitoring including total & batch counting. Combi plates & Pre-slitter shafts on 1st & 2nd units Lodpfx Afsx U Dc Sozjrg Eye-level control panel FA 46ME presser/stacker/marker delivery Folding sequence: 1st buckle unit 78cm with 4 plates 2nd mobile buckle unit 78cm with 4 plates 3rd 'U' mobile buckle unit 56cm with 4 plates - returns sheet to feed position.

Condition: excellent (used), Year of construction: 2011, Ref:11058 . 2008 MBO B30C/644 Folding Machine Excellent condition, very well maintained. Equipped with: Lrodpfx Afsx U A E Eezog R760 - Low profile round pile continuous feeder Automatic total and batch counter Buckle plates with swing-away deflectors Sound hoods to all units Eye-level control panel Folding sequence: 1st buckle unit 76cm with 6 plates 2nd mobile buckle unit 76cm with 4 plates 3rd mobile buckle unit 38cm with 4 plates SBAP-24ME Press Stacker Specification: Minimum Sheet Size: 150mm x 180mm Maximum Sheet Size: 760mm x 1270mm Mechanical Speed: 180 m/min

Condition: used, Year of construction: 2011, Suitable for fully automatic grinding, re-toothing, and beveling of HSS and segmented circular saw blades, as well as solid carbide circular saw blades, chamfering saw blades/thin-cutting saws with chip breakers (diameters from 200-500 mm, tooth pitch from 8-30 mm), using a deep grinding process with CBN or diamond grinding wheels. Accessories: Total enclosure Automatic central lubrication Integrated coolant system with coolant tank and pump Device for fully automatic chamfering of regularly toothed saw blades Programmes for all standard curved and pointed teeth CAD programme for designing your own tooth shapes and changing the speed sequences Automatic threading of the grinding wheel, including checking the saw blade diameter and tooth pitch Service software with error diagnosis display on the screen Automatic switching of the peripheral speed between CBN and diamond grinding wheels Lredpfxeycu Erj Afzog Grinding wheel thickness compensation, i.e. different tooth pitches can be ground with one grinding wheel Conversion kit for oil (pressure relief flap, electromechanical door lock, pressure monitor, etc.), Aerosol fire extinguishing system Oil drip tray Machine light Control cabinet cooling unit. Saw diameter: (40) 130 - 850 mm Tooth pitch: 1 - 55 mm Number of teeth: 2 - 998 Saw blade thickness: max. 8 mm Grinding wheel diameter: 200 x 32 mm Coolant pressure: approx. 6 bar Coolant tank: approx. 300 l Grinding motor: 3 kW Connected load: approx. 7.3 kW (400 V / 50 Hz) Weight: approx. 1600 kg Dimensions: L x W x H = 1250 x 1870 x 2250 mm colour: grey RAL 7045, RAL 7047.

Condition: as good as new (ex-display), The AHK M 1230 NC is a robust press brake from the renowned KNUTH brand, designed as a modern, cost-effective alternative to traditional CNC press brakes. This versatile machine is well-suited for operators who prefer working without complex CNC programming, featuring a user-friendly touchscreen interface for direct positioning of the back gauge along the X and R axes. The machine's high-precision steel construction and hydraulic design ensure excellent rigidity and durability, accommodating intricate bending sequences. With a pressure force of 30 tons and a bending length of 1,250 mm, it is ideal for processing various materials and contours. Noteworthy standard equipment includes the Weintek 7'' NC control, motorized back gauge, and light curtains, which enhance both safety and productivity. You can confidently order this reliable press brake online to elevate your sheet metal processing capabilities. Ledpfx Aemf Tilefzorg

Condition: used, total length: 7,300 mm, total width: 1,800 mm, total height: 1,550 mm, Empty weight: 6.000 kg Price: On request Max. working width: 6050mm Max. thickness: 1.5mm Max. opening: 250mm Max. angle: 180gr Ledpfxsw Evdis Afzjrg Number of adjustable angle-sequences: 8 With cutting device on back-side - Documentation available: No - CE certificate present: No - Serial number: 425 - Control: Conventional - Motor power: 4.5kW - Transport dimensions: 7300mm x 1800mm x 1550mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2012, product length (max.): 2,250 mm, This Hüttenhölscher Line multi-spindle drilling machine was manufactured in 2012. It features a PC-controlled function sequence under Windows 7 with TwinCAT, a 6-station loading gantry, and a 2-axis gantry robot. The machine includes a vacuum generation by ejector and multiple conveyor lines for efficient material handling. Ideal for high precision drilling with its advanced control system. Contact us for more information about this machine. • Control: PC-controlled function sequence under Windows 7, TwinCAT • Part dimensions: • Length: 300–2250 mm • Width: 350–710 mm • Thickness: 16–25 mm • 2-station drilling station: • Base frame as welded construction with machined screw-on surfaces • 2x toothed belt conveyors V = 1.5 m/sec • 2x pneumatic lift for toothed belt conveyors • 2x stoppers for cabinet parts, dampened by shock absorbers • 2x pneumatic double clamping cylinders, controlled by ball screw and servo motor, moved to side height (measuring the side height) • 2x pneumatic cross alignment ruler (plausibility check) • 2x vacuum clamping units in the drilling machine table • 2x 0-line controllable • Support: • Support can be moved in the X direction by means of a servomotor • 2x drilling gear (support 1): • Support equipped with 2 units (machining from above) • Individually movable in Y direction by servomotor • Individually movable in Z direction by servomotor • Drilling gear a = 32 mm, adjustable with frequency converter, drill chuck Ø 10h7 with grub screw • Callable spindles, 8000 rpm • Two 16-spindle drilling gears • Groove saw (support 1): • Sawing units for cutting special rear wall grooves • Sawing unit with tool holder, speed control via frequency converter • Pneumatically pilot-controlled working position • 2x milling spindles right/left at the front edge (support 1): • Pneumatically pilot-controlled working position Additional equipment (automation, handling, guarding, conveyors) • Loading/handling: • 6-station loading gantry • 2-axis gantry robot; Y/Z axes with servo motors; travel distances: Y-axis 8500 mm, Z-axis 1500 mm • Suction crossbeam with four-circuit vacuum supply; vacuum generation by ejector • Double part detection • Portal supports • 4 stacking stations • 1 hand rest station (automatic/manual feeding) • 1 removal station (automatic/manual removal) • Side feed range: • Stack height: max. 1000 mm (60 parts) incl. protective plate • Protective plate sizes: • 1380 mm x 780 mm • 1220 mm x 720 mm • 1120 mm x 620 mm • 2290 mm x 620 mm • Thickness: 25 mm • Thickness: max. 28 kg Lodpfsyctausx Afzjrg • Floor roller conveyor / stack feed: • 4 roller conveyor lines, 930 mm wide x 3600 mm long, AH 300 mm • Feeding/removal: manual cross transfer carriage • Support stations / automatic feeding: • Transport section 950 mm wide x 4100 mm long; integrated side stop • Manual feeding: • Toothed belt section 900 mm wide x 2500 mm long • Transfer shuttle: • Toothed belt section 900 mm wide x 2500 mm long; horizontal stroke approx. 2500 mm by three-phase motor • Return: • Transport section 950 mm wide x 4000 mm long; pneumatic stopper • 90° rotary unit: • Vacuum suction cup; pneumatic stroke; rotation by three-phase motor by +/- 90° • Discharge stations / automatic removal: • Transport 950 mm wide x 3000 mm long; positioning of cabinet parts by encoder • Manual removal: • Toothed belt section 900 mm wide x 3000 mm long • Protective system for feeding: • 45 m protective fence with 3 access doors

Condition: not inspected (used), Year of construction: 1997, SCM Compact 23 Moulder Description Spindle sequence bottom-right-left-top Infeed table length 2500mm Max. Working width 230mm Max. Working height 120mm Feed speed 6-12 mtr / min Spindle speed 6,000 rpm 400Volt 50Hz CE (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Lodpfowc A R Dsx Afzorg Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: not inspected (used), Year of construction: 1995, SCM Compact 23 Moulder Description Spindle sequence bottom-right-left-top Infeed table length 2000mm Max. Working width 230mm Ledpfx Aoq Iipxjfzjrg Max. Working height 120mm Feed speed 6-12 mtr / min Spindle speed 6,000 rpm 400Volt 50Hz CE (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2005, Weinig Unimat 500 Moulding machine Description; Dimensions of the infeed table: 2500 mm Number of axes: 5 Spindle Sequence: Bottom-right-left-top-bottom Mobile spindle: No Planing width: 20 / 230 mm Lodpfx Afow Ebacozorg Planing height: 12 / 120 mm Throughput: 24m/min Groove bed: No Other comments:- (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Year of construction: 2019, pressure 135 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 135 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm Number of working hours ca. 40.0 h control DA 58 T oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 8186 kg range L-W-H 4250 x 2150 x 2800 mm machine has rarely been in use with only approx. 40 operating hours (!!) current new price approx. 80.000 Euro special price on request - in checked conditions - machinevideo - ?v=g0lwOs0s_40 ----- POWER BEND PRO electro-hydraulic press brake with : * increased installation height * increased cylinder stroke * increased throat depth ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-58T" graphics/touchscreen * 2D graphic programming * 15" color screen TFT with high resolution * Bending sequence calculation Lredox Haxtjpfx Afzjg * Product programming and display in real size * USB interface - CNC controlled axis : Y1 - Y2 - X - R + CNC crowning system - CNC electro-motorized back gauge * Backgauge with R-axis, on ball screws * Traverse paths : X = 800 mm // R = 250 mm * Traversing speed X axis ... 230 mm/s * with 2x manually adjustable stop fingers - ROLLERI roe deer foot top tool "PS 135.85-R08", system "A" * including quick-change clamp * Including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device : Light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with SLIDING system (HIWIN plain bearings) - 1x free-moving double foot control - CE mark / declaration of conformity - Operating instructions

Condition: like new (used), functionality: fully functional, Year of construction: 1997, Hydraulic press brake LVD PPEB-EQ 80/25 S630 with retrofit 2023 Year of construction 1997 Serial number 24589 Technical specifications Force 800kN Working length 2500mm Distance between uprights 2050mm Stroke 200mm Distance table – ram 400mm Gap 400mm Width table 150mm Approach speed 130mm/s Working speed 11mm/s Return speed 115mm/s weight 6200 kg motor 7,5 kW NEW 2023 CNC COMMAND CONTROL S-630 4 axes Y1 - Y2 X - R Touch screen 10” 2D-Graphic simulation of bending Automatic sequence bending Automatic development Database for tooling and workpieces ...  2 front supports included  . Lrodpfxoyag Umj Afzjg

Condition: good (used), Year of construction: 2020, functionality: fully functional, working width: 1,350 mm, Wide belt sanding machine for woodworking Manufacturer: Viet, Model: SV3-4.3 RVXR Year of manufacture: 2020 Technical Data Manufacturer: Viet Italia S.r.l. Model: SV3-4.3 RVXR Year: 2020 Belt width: 1350 mm Maximum working height: 160 mm Machine with adjustable head (fixed working height of 900 mm) Feed speed: 1.1 kW (1.5 HP) Speed: 0.5–7 m/min Calibration sanding unit, sanding drum diameter: 190 mm Belt length: 2620 mm Dimensions: approx. W 2.2 x D 3.5 x H 2.5 m (+ dust extraction) Weight: 6.5 t (+ dust extraction) Features – Machine with movable head – Sanding belt change on the left side – Tool set – Digital thickness display – Material too strong at the infeed – Electropneumatic oscillation control – Air filter with condensate separator and automatic drain – Maintenance-free pneumatic system – Pneumatic lifting and lowering when switching sanding units on or off – Machine with head adjustment (fixed working height 900 mm) – Lifting system on 4 columns (spindle) with chain drive – Table extension front and rear, each with 1 roller – Industry 4.0 (LAN) package with LAN network connection – Centessimal lifting system with inverter – Electromechanical grit set – Belt speed adjustable via frequency inverter – V-Spin unit with 15-disc sanding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in line and moving in opposite directions. The combination of both movements makes the V-Spin unit suitable for rounding sharp edges and removing slag or oxides. – 16 support plates for V-Spin unit, diameter 80 mm Scotch-Brite + abrasive, grit 80 – 16 support plates for V-Spin unit, diameter 80 mm Tampico + grit 80 – X-Spin unit / sanding system with 15 discs, diameter 123 mm Group consists of 5 rotary heads, each fitted with 3 rotating sanding brush pads, each diameter 123 mm – Oscillating Scotch-Brite brush – Linear cleaning systems – Conveyor belt Conveyor made of HYPALON rubber, heat and oil resistant, hardness 60 SH, smooth surface – Belt cleaning blower for the transport belt incl. extraction – IPC MONITOR 15" touch-screen control for machine operation, up to a maximum of 10 processing units Lodpoya Eyhofx Afzorg – 2 Euro pallets filled with new sanding belts – Technical documentation including operating manual The control system manages the following processes: - Start sequence of selected drive motors - Storage of up to 1000 processing programs - Automatic positioning of thickness control - Acoustic and visual notifications at machine startup - Operating hours counter - Automatic control of feed speed depending on processing capacity (indicated in sqm). This functionality enables increased sanding belt lifetime through the use of statistics. Extraction Unit - Manufacturer: Ringler, Kärcher Group - Model: RE 36/110 D11 IE3 - Output: 11.0 kW - 2930 rpm - Connection: 400 V / 19.54 A / 50 Hz - Year: Dec 2018 - Weight: 754 kg All information without guarantee. A demonstration is possible anytime in our showroom.

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Ljdpfsrt U Nujx Afzsrg Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2016, AKV 3006 DK-F 1 unit edge banding machine AKV 3005 DK-F with jointing cutter unit, including DIA tooling. Jointing thickness up to 40 mm, workpiece thickness up to 3 mm. Combination milling station with radius R 2.5 mm. Technical specifications: - Hot-melt glue application to the workpiece for edge material up to 3 mm. - 60 mm workpiece thickness without jointing aggregate, 40 mm with jointing aggregate. - Maintenance-free, coated glue pot. - HF end trimming station (16,000 rpm) for front and rear edge overhang. - HF milling station (16,000 rpm) with replaceable insert cutter (combination type) and fine adjustment accessible from the operator side. - Spaces available for additional processing units (Hebrock system). - Feed rate approx. 10 m/min. - Adjustable cutting depth for trimming saw. - Signal lamp for workpiece sequence. - Robust chain drive. - Ergonomically arranged control panel. - Double roller top pressure beam. - Viewing windows for aggregates from both rear and operator sides. - PLC control including touchscreen. Technical data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg depending on equipment - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic including cooling and anti-static spray unit, 2014, 1 unit hot air aggregate for creating the optical zero-joint using special edge materials intended for this purpose. Including: - Pneumatic glue pot positioning - Cooling and anti-static spray unit - Two additional quick-change edge channels - Special version for corner rounding unit, max. workpiece thickness 60 mm, minimum workpiece length 200 mm - Exclusively for Hebrock edge banding machines of the 3000 series - Retrofitting possible later (additional costs on request) Technical data (Airtronic & corner rounding unit): - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min Lredpoycuknsfx Afzsg - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Operational in approx. 2 minutes - Special version, minimum workpiece thickness 8 mm Further accessories and upgrades available on request: - Airtronic retrofitting on PLC machines, only possible at the Hüllhorst–Oberbauerschaft factory - Upgrade to edge thickness 8 mm, up to max. workpiece thickness 40 mm, with pneumatic saw adjustment - Special infeed fence for overlaid panels, 16 mm and 19 mm thickness, max. glue overhang 8 mm, separate pneumatic milling cutter adjustment (straight/radius) controllable from operator panel - Buffing station (swabbel), 1 unit - Corner rounding unit, 1 unit, including combination tool and pneumatic chamfer/radius adjustment, max. workpiece thickness 40 mm, min. workpiece length 300 mm, radius R 2.0 mm - Ball bearing for corner rounding cutter 24.1 mm: 1 unit - Ball bearing for corner rounding cutter 24.2 mm: 1 unit - Corner rounding unit for 60 mm workpiece thickness: 1 unit - Quick-change device for the corner rounding unit: 1 unit - Exchange motor 0.37 kW for the corner rounding unit: 1 unit, including terminal box with electrical connector, two pneumatic quick couplings, motor plate and short-stroke cylinder, or optionally Siko counter, including R 1.0 mm radius cutter, 24.1 mm bearing for corner rounding unit: 1 unit, 24.2 mm: 1 unit - Radius scraper: 1 unit with pneumatic lift-off device, radius R 2.0 mm and R 1.0 mm - Flat scraper: 1 unit with pneumatic insertion control - Glue station changeover system including glue outlet device downward (preparati

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Lrsdpfsvvkfdjx Afzeg

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details grinding length 2000 mm grinding width 850 mm distance spindle center to table 900 mm control Siemens 840 D total power requirement 155 kVA weight of the machine ca. 15 t dimensions of the machine ca. 8815 x 4185 x 2963 mm Additional information CNC Precision Surface and Profile Grinding Machine Technical Specifications: Grinding length 2000 mm Grinding width 850 mm Travel, transverse 750 mm Distance from table to spindle center 900 mm (or 800 mm with intermediate plate) Magnetic plate size 2000 x 700 mm Table load without magnet 3500 kg Table speed 60 m/min. Spindle drive 26 kW Grinding wheel dimensions 500 x 150 x 203.2 mm Grinding wheel peripheral speed 35 m/s Equipment: 3-axis contouring control Siemens 840 D Grinding programs: Full-cut grinding Face grinding Plunge grinding Path grinding X/Y-axis and Y-Z-axis Profile grinding Automatic program sequence with roughing, finishing, fine finishing and spark-out grinding. Multiple plunge grinding for economical production Surface grinding with continuous, continuously programmable cross feed Grinding wheel calibration Plunge/step grinding Face grinding Dressing in the grinding cycle with lift-off amount Fully automatic compensation of dressing amounts Tool management AC servo drives with ball screw and absolute measuring system in the X, Y, and Z axes Preloaded precision roller guides in the X, Y, and Z axes with linear guides Lrsdpfox Uzn Eox Afzsg Portable electronic handwheel Automatic belt filter system Coolant heating Electro-permanent magnetic chuck Fully enclosed Direct measuring system in the vertical axis Temperature-controlled machine bed for consistent accuracy Linear motor in the X-axis, table speed max. 60 m/min. Swiveling control panel Continuous speed control of the grinding spindle Electrical linear measuring device for cross-travel adjustment with zero point setting in any position, resolution 0.001 mm Electro-mechanical locking via position control of the headstock in the cross direction for profile and plunge grinding Mechanical extraction of coolant mist TAG table dresser Pre-profiling dresser VPG 190 Diamond grinding wheel, 190 mm diameter Software program for pre-profiling dresser VPG Rough profiling (roughing) CNC table profile dresser TAD 190 Profile depth max. 45 mm Contour accuracy +/- 0.0025 mm Swivel angle +/- 65 degrees Max. dressing speed 210 mm/min. Diamond wheel for table dressing machine TAD 190 Regrinding package for diamond wheel Intermediate plate for raising the magnet WinWop profiling software Import of CAD profile data SP 60 JOB Listing expansion package Additional holes for the magnet clamping plate to facilitate removal of workpieces using compressed air Ghost shift circuit for shutting down the machine after the end of the program

Condition: new, The AHK M 1230 NC is a highly efficient press brake from KNUTH, designed specifically for sheet metal processing within the press brakes category. This machine offers a modern, cost-effective NC alternative to traditional CNC press brakes, making it ideal for operators accustomed to manual programming. Featuring a high-precision, stress-relieved steel frame and hydraulic cylinders, the AHK M 1230 NC excels in handling complex bending sequences effortlessly. Enhanced safety features, including light curtains and a CE-compliant design, ensure operator protection while maintaining productivity. The NC control system, complete with a user-friendly touchscreen, allows for easy input of bending sequences, accommodating up to 500 programmable data sets. You can confidently handle a variety of materials and shapes thanks to Promecam tool mounts and an adjustable back gauge with motorized X and R axes. With features designed for ease of use and reliability, now is the perfect time to request a quote for the AHK M 1230 NC press brake, ensuring your workshop benefits from superior capabilities in sheet metal processing. Lsdpfsqc S Naox Afzerg

Condition: excellent (used), CATALOG NUMBER 7714 TECHNICAL DATA - Machined diameter range: 40-140mm - Minimum input material length: 750mm Ledpfx Afow Ipccjzerg - Allowance for machining (on diameter): max 50mm - Cutter head drive motor: 22kW - Infinitely variable feed speed + forward/reverse - Feed motor: 2.2kW - Pneumatic cylinders: 6 pcs Sequence: - Infeed roller - 3 toothed feed rollers - 3-knife cutter head - 3 smooth outfeed rollers - Outfeed roller - Extraction port diameter: 200mm - Brake - Dimensions (L/W/H): 3300x1450x1750mm - Weight: 2100kg ADVANTAGES – Manufactured in Poland – DTR documentation – Used rounding machine – Excellent condition Net price: 78,900 PLN Net price: 18,780 EUR depending on the rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. Lodpfxsxnlfls Afzsrg - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, grinding length: 700 mm, grinding width: 450 mm, NEW ARRIVAL 1 used hydraulic surface grinding machine GEIBEL & HOTZ FS 6040 The grinding area of the G & H FS 6040 is 600 x 450 mm - Year of manufacture: 2000 - Machine with automatic program sequence - roughing - finishing - spark-out - return to starting position. The machine is equipped with 2-axis digital readout, stainless steel coolant system, various flanges, fine pole pitch magnetic chuck, wheel dresser. Compatible flanges for Jung HF/JF 520. Machine includes operating manual and electrical schematic - fully function tested. Very lightly used machine from prototype/testing department (original paint). Pricing: ex stock, unpacked, uninsured, domestic sales plus VAT. Delivery time: immediately - subject to prior sale. Payment: as customary in the trade - before collection - immediate upon receipt of invoice. Ljdpfx Aovz A Dcsfzsrg Best regards, Induba GmbH Mathias Becker

Condition: excellent (used), CATALOGUE NUMBER 7660 TECHNICAL DATA - maximum diameter of machined material: 160mm - minimum input material length: 750mm - machining allowance (on diameter): max 30mm - knife head drive motor: 33kW - stepless feed speed control via frequency inverter - feed motor: approx. 2.2kW - pneumatic actuators: 7 pcs Sequence: - 4 toothed feed rollers - 3-knife head - 3 smooth outfeed rollers - dimensions (L/W/H): 3800x1100x2800mm - weight: approx. 4000kg ADVANTAGES – French manufacture – Robust construction – Pneumatic actuators (hold-downs) – Used peeling lathe Lrsdpfx Afox U Ackjzog – Very good condition Net price: 85,900 PLN Net price: 20,450 EUR (exchange rate 4.2 EUR) (Prices may change with higher fluctuations)

Condition: ready for operation (used), Year of construction: 2010, This Hüttenhölscher Drilling rig was manufactured in 2010. It features a PC-controlled function sequence under Windows 7, TwinCAT, and a used drilling system with a 6-station loading gantry. The rig includes a 2-axis gantry robot, Y/Z axes with servo motors, and a travel distance of Y-axis 8500 mm, Z-axis 1500 mm. It also has a suction crossbeam with a four-circuit vacuum supply. Contact us for more information about this machine. Lrsdpfx Afjx Tkaujzjg Application Types Boring & Drilling (Wood)