Used Doosan for sale (296)

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Mfd. 2019 Tooled as pictured Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. Hedpfxsw Dvnxo Aftofr RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 Hfedsvzln Rspfx Aftsr number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Movement X-Axis Movement 578 mm Hedpjx D Nkqofx Aftefr Z-Axis Movement 2033 mm Tail Stock Pinol tool taper Morse Taper MT6 Additional Equipment Stations: 12 Type: BMT75P Tooling: All tooling available, including boring bar holders, general turning tool holders, facing tools Collets: ER40 Collets This DOOSAN Puma 400LM was manufactured in 2014. A robust horizontal turning machine featuring a spindle speed of 1500 rpm and a 12 station turret BMT75P compatible with ER40 collets. It comes with a comprehensive set of tooling, including boring bar holders, general turning tool holders, and facing tools. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 400LM machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2017, operating hours: 24,500 h, Serial number: DIN0DA30LH074xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21134 Specifications: 2017 model Approx. 6870 hours Approx. 24,500 km Power: 270 kW (375 hp) Tires (see photos) Road registered (white plates) High tailgate Central lubrication Length: 955 cm Hfodpfx Aow Ruyxoftjr Width: 299 cm Wheelbase: 411 / 177 cm Curb weight: 24,300 kg Max payload: 27,125 kg 6x6 Reversing camera LED work lights Radio/CD Air conditioning Description: 2017 Doosan DA30 articulated dump truck for sale.Equipped with central lubrication, high tailgate, and reversing camera.Ready for quick delivery. Hours: 24500 Own weight: 24300 Model: 2017 Doosan DA30 Dumper

Condition: good (used), Year of construction: 2014, 780mm Swing, 630mm Swing over the Cross-Slide, 481mm Max Cutting Diameter, 790mm max cutting length, Hedpfsx Eluwsx Aftjfr 12 Station Turret, 76mm bar capacity, 3500rpm, 22kW Spindle, Fanuc Oi, Tool setter, 10” 3 jaw chuck, Low Volt Light, Tailstock, Swarf Conveyor, Coolant.

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS CNC Control: FANUC 18i-TB X1/X2 Axis mm: 555/185 Z1/Z2 Axis mm: 1,095/1,140 Y Axis mm: 160 (+/- 80) B Axis mm: 240 (+/- 120) Maximum Turning Diameter mm: 550 C Axis Increment: 0.001° Maximum Turning Length mm: 1,020 Cutting Feed Rate mm/min X,Z,Y: 500 Rapid Traverse Speed mm/min: X1, Z1: 24,000 Y: 16,000 B: 27,000 C: 200 (Z2: 24,000) (X2: 24,000) Swing Over Bed mm: Ø 750 Swing Over Cross Slide mm: Ø 600 Bar Capacity mm: Ø 65 (main) / Ø - (sub) Max. Rapid Traverse m/min X,Z,B-Y: - Spindle / Sub-Spindle: - Spindle Speed rpm: 5,000 Spindle Power kW: 22/15 Torque Nm: - Main Spindle Bore: - Hfsdjxxdmispfx Aftsr Main Spindle Nose: A2-6 Milling Head: - Spindle Speed rpm: 10,000 Spindle Power kW: 15/11 Torque Nm: - Taper Type: CAPTO C6 Number of Tools in Magazine: 40 Turret: - Turret Positions: - Number of Driven Tool Stations: - Driven Tool Speed rpm: - Driven Tool Power: - EQUIPMENT Chip Conveyor, Hinged Belt Type: Included Bar Feeder Interface Adjustment Control: Included MACHINE DIMENSIONS Length mm: 6,070 Width mm: 2,682 Height mm: 3,011 Weight kg: 15,500

Condition: good (used), power: 202 kW (274.64 HP), fuel type: diesel, color: orange, Year of construction: 2022, operating hours: 2,901 h, Equipment: air conditioning, Technical information AdBlue system: Yes Make of engine: DL08-LEE04 Top speed: 6 km/h Empty weight: 32.200 kg Hodpjx A Hmajfx Aftjfr Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DHKCECENTN0010409 Other information Output of the auxiliary hydraulics: 288 l/min Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 10,605x3,4x3,37 Production country: KR Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: new, power: 257 kW (349.42 HP), fuel type: diesel, color: orange, Year of construction: 2023, operating hours: 8 h, Equipment: air conditioning, Technical information Track width: 60 cm Empty weight: 50.800 kg Make of engine: DC13 076A Functional Bucket capacity: 2,72 m³ Hfedjxuz Ivopfx After Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 12,2x3,35x3,8 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information CE marked - No CE Certificate available

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,083 h, General Data Machine weight 9500kg Control Unit Brand FANUC Main Drive Spindle speed range 10000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 570 mm Z-Axis Movement 570 mm This 3-axis DOOSAN VC-510 was manufactured in 2013. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. The machine includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC-510 vertical machining center. Contact us for more information. Hodpfsx D Dzqox Aftjfr Application Types Milling

Condition: used, Year of construction: 2018, operating hours: 7,450 h, Serial number: DHKCEWBSVH500xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20213 Specifications: - 2018 model - 8000 Hours (will increase slightly) - 17,700 kg - 102.1 kW - Articulated boom - Blade - Central lubrication - G60 HK-mount - Stage 5 engine - 4 new rear tires - K80 trailer with electric hydraulics - Engcon ec219 rototilt - 650 l Gjerstad sanding bucket (new knife) - Tool cabinet - Wheel guards - Support legs - Blade Hjdpfowdvg Iox Aftefr - Lights - Air conditioning/ac - Radio - Ready to deliver Description: We have a 2018 Doosan DX165W-5 wheeled machine w/ K80 trailer hitch with electric and hydraulics, articulated boom, Engcon ec219 rototilt, Gjerstad sanding bucket for sale.u The machine is well maintained and cared for by the owner. It will be serviced again before sale. Ready for delivery Hours: 7450 Own weight: 17700 Total Weight: 17700 Kw: 102,1 Model: DX165W-5 hjulmaskin m/ K80 hengerfeste med elektrisk og hydraulisk opplegg, knekkbom ,Engcon ec219 rototilt, Gjerstad pusseskuffe. SE VIDEO

Condition: good (used), Year of construction: 2016, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, 65mm bar capacity, spindle speed 4,500rpm , 16 station turret, 15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Doosan FANUC-i control, Hfjdpfxsx Elr Aj Aftjr tailstock, coolant, tool setter, parts catcher, 3 jaw chuck,low volt light

Condition: used, Year of construction: 2014, CNC turning and milling center (9 axes) with Y-axis, B-axis, sub-spindle, and tool turret CNC control FANUC 31iTA with Manual Guide i Swing diameter over bed: 750 mm Swing diameter over cross slide: 600 mm Collision-free turning diameter: 210 mm Max. turning diameter main spindle: 540 mm Max. turning length: 1,520 mm Main spindle left and right (sub-spindle) Chuck diameter: 210 mm Spindle bore: 76 mm Bar capacity: 66 mm Speed range up to: 5,000 rpm Max. torque: 318 Nm Turning/milling spindle (swivel head, B-axis) Speed range up to: 12,000 rpm Hfjdpfx Afjx Hy R Njtjr Torque: 81 Nm Drive power: 18.5 kW Positioning: 0.001° Swivel range: 240° (+120°) Tool magazine ATC Number of magazine stations: 40 Tool holder: CAPTO C6 Lower turret Tool stations: 12 Drill holder diameter: 40 mm Tool shank cross-section: 25x25 mm Tool holder type: BMT 55P Motor drive power: 5.5 kW Tool speed: 5,000 rpm - Chip conveyor - Parts removal with conveyor belt - Tool measurement arm - Internal coolant supply through sub-spindle - Chuck cleaning - Air/water through turret - Knoll compact filter unit - Automatic workpiece measurement

Condition: good (used), power: 257 kW (349.42 HP), fuel type: diesel, color: orange, Year of construction: 2021, operating hours: 7,835 h, Equipment: air conditioning, Technical information Chassis type: articulated AdBlue system: Yes Make of engine: DC13 Top speed: 40 km/h Empty weight: 22.930 kg Functional Bucket capacity: 4,5 m³ CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DWGCWLECJM10066 Other information Hodpfx Asxxmyrjftofr Front tyres / undercarriage remaining: 70 Rear tyres remaining : 80 Output of the auxiliary hydraulics: 266 l/min Emission level: Stage V / Tier V Delivery terms: EXW Transport dimensions (LxWxH): 9,244x3x3,66 Production country: KR Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,030 h, Year of manufacture: 2019 Hedpfexqfb Ejx Aftsfr Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m

Year of construction: 2014, condition: ready for operation (used), General Data Machine weight 15500 kg Main Drive Number of axis 7 Spindle Speed 4000 RPM Spindle motor power 22 kW Control Unit Brand FANUC Model Series 31i-MODEL B5 Movement X-Axis Movement 630 mm Z-Axis Movement 1585 mm Y-Axis Movement 115 mm This 7-axis DOOSAN Puma MX2600ST was manufactured in 2014, featuring a robust horizontal turning machine design. It includes a B-axis of +/-120 degrees, extensive X, Y, Z travels, and a bar capacity of 76mm. The machine is equipped with a FANUC 31i-Model B5 control, a 40 station tool changer, and a 22kW spindle motor. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma MX2600ST machine we have for sale. Contact us for more information. Hfedpox D E Rajfx Aftjr Application Types Turning

Condition: used, Year of construction: 2013, operating hours: 8,935 h, Serial number: 4084xxxx Please contact ATS Norway for more information Please provide reference number upon request: 16505 - Is certified or delivered certified - 10.000 hours - 112,400 km - Good tires - 6-wheel drive - Good box - Central grease - Webasto - Reversing camera - Extra light - 360 kW motor - Radio/cd - 2 seats - Delivery by agreement Dump trucks have a history that the owner can confirm is in his possession. Hodpsvg Nq Hofx Aftsfr Low hours and seems to be well taken care of Can be delivered by agreement Hours: 8935

Condition: good (used), Year of construction: 2017, Traverses XYZ: 600 x 655 x 500mm, 350mm diameter table, max table weight 250kg, A axis table tilt +30°, -120°, C axis 360degrees, 18.5kW, 12000rpm, BT40, 30 station tool changer, Hfjdpfx Afsx Eir Deter Fanuc I series control, swarf conveyor,

Condition: used, Year of construction: 2017, operating hours: 7,800 h, Year of manufacture: 2017 Hedox Hgtwjpfx Aftjfr

Condition: ready for operation (used), Year of construction: 2014, operating hours: 28,446 h, Control Unit Brand FANUC Movement Hedpfex D Dz Djx Aftsfr X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm This 3-axis DOOSAN VC 510 was manufactured in 2014. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining center. Contact us for further details regarding this machine. Application Types Milling

Condition: used, Year of construction: 2022, Serial number: DXCCEBDTVN002xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20907 Specifications: Certified until 10/2025 Year: 2022 Hours: approx. 2,600 Power: 79.8 kW Hsdpfx Ajww Ahroftefr Weight: approx. 16,620 kg Track width: approx. 70 cm Machine width: approx. 290 cm New tracks (replaced at approx. 2,100 hours) Engcon EC219 tiltrotator S60 quick coupler Gjerstad grading bucket Gjerstad digging bucket Central lubrication Webasto heater replaced Rear and right-side cameras Extra work lights Radio/CD A/C and heating Undercarriage: see pictures Description:2022 Doosan DX160LC crawler excavator offered on behalf of customer.Machine is in daily operation and will be delivered with 500-hour service completed before sale.Comes with Engcon tiltrotator and two Gjerstad buckets.Delivery by agreement. Own weight: 16620 Model: DX160LC Beltegraver – Rotortilt og 2 skuffer

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle speed 12,000rpm, BT40 spindle taper, Spindle Motor 17kW, FANUC Oi Control, 30 Station ATC, Hfjdpfox Dk Dlsx Aftsr Low Volt light, Through Spindle Coolant

Condition: used, Year of construction: 2011, operating hours: 10,500 h, Year of manufacture: 2011 Empty weight: 18.890 kg Hfjdpfxjx Hgr Ho Aftsr Dimensions (LxBxH): 810 x 292 x 347 cm Digging depth: 7.533 m

Condition: ready for operation (used), Year of construction: 2012, operating hours: 37,513 h, General Data Machine weight 9500 kg Main Drive Tool taper BT40 Hfsdex D Dz Ropfx Aftsr Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm Tools Number of index 40 This 3-axis DOOSAN VC 510 was manufactured in 2012. It features a twin pallet vertical machining centre with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining centre. Contact us for more information. Application Types Milling

Condition: used, fuel type: electric, lifting height: 4,800 mm, Year of construction: 2014, operating hours: 6,230 h, Year of manufacture: 2014 Empty weight: 23.500 kg Carrying capacity: 1.800 kg Hfedpfx Afex Hgrajtor GVW: 25.300 kg Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m

Condition: ready for operation (used), Year of construction: 2016, operating hours: 300 h, Control Unit Hfjdpfox E Egasx Aftjr Brand FANUC Model iSeries Table Table load 400 kg Main Drive Number of axis 4 Spindle Speed 10000 RPM Tool taper BT 40 Movement X-Axis Movement 800 mm Z-Axis Movement 500 mm Y-Axis Movement 500 mm This 4-axis DOOSAN DNM 4500 was manufactured in 2016. It features X/Y/Z travel of 800 x 500 x 500 mm, a table size of 1000 x 500 mm, and a maximum table load of 400 kg. The spindle operates at 10,000 RPM with a BT40/CAT40 taper, complemented by a 24-position ATC. Rapid traverse rates are 30 m/min for X/Y and 18 m/min for Z. Includes a coolant system and full safety enclosure. Contact us for more information. Application Types Milling