Used Doppstadt Dw 3060 for sale (77)

Condition: excellent (used), Year of construction: 2009, Diesel engine: 430 HP Rear discharge conveyor, overband magnet, radio remote control. We can also offer financing if required. Ffjdpjh Nguksfx Aarjw

Condition: used, Year of construction: 2017, operating hours: 6,777 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Fjdpoxx Tfzjfx Aarsfw Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Condition: excellent (used), Year of construction: 2014, Diesel engine: 430 HP Rear duscharge conveyor Overband magnet Hydr. self-propelled drive (for moving on site) Fsdpji Trvbefx Aarofw Radio remote control We can also offer financing if required.

Condition: refurbished (used), Year of construction: 2012, operating hours: 7,340 h, Doppstadt DW 3060K Büffel - Year of manufacture: 2012 Fjdpfx Aeyhyuyearofw - Operating hours: 7,340 - Engine: Mercedes Benz, 430 HP - Roller with 21 teeth - Crawler chassis - Remote control - Weight: 30,000 kg Machine is overhauled and immediately available.

Condition: refurbished (used), Year of construction: 2014, overall weight: 25,000 kg, Doppstadt DW 3060 Buffalo type C - Year of construction 08/2014 - Operating hours 7275 - Engine Mercedes Benz 430 HP Ffsdpfx Aeygnk Aearew - AD Blue - Roller : 21 teeth - Overband magnet - Remote control - Hydraulic drive ( self drive) Machine is overhauled and immediately available

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,225 h, overall weight: 25,000 kg, Doppstadt DW 3060 Biopower Type F - Year of manufacture: 2019 - Operating hours: 5,225 - Engine: MTU R61300 with 490 HP - AD BLUE - Weight: 25,000 kg - Remote control - Humidification system - Rear conveyor 5.5 m - Overband magnet - Hydraulic drive (self-propelled) - Central lubrication Machine is overhauled and immediately available. Fedpfox N Ugdjx Aarsfw

Condition: excellent (used), Year of construction: 2015, operating hours: 2,000 h, functionality: fully functional, Type: DW 3060 Type D Fodpsxrtt Eefx Aarjfw Year of manufacture: 07/2015 Location: Germany Operating hours: 1,950 h Available from: by arrangement Specification: Diesel engine MTU R 1300 EUROMOT IV, 320 kW Total weight: approx. 25,000 kg Hydrostatic drive 18-channel wireless remote control Rear conveyor 5.5 m, hydraulically foldable Comb extension Moisturizing system 21 roller teeth, Form C DoubleLock quick-change system 20 trapezoidal comb teeth Overband magnet Hopper extension Service details The machine is in very good technical and optical condition Before delivery, the machine will receive a brand new planetary gearbox Before delivery, the machine will be technically inspected and serviced The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. Interim sale, changes, and repairs reserved.

Condition: like new (used), We offer a comprehensive spare parts package for the machine types Doppstadt DW 3060 and Doppstadt AK 430/435/560. These are new and as-new parts! Please request our list! Do you have a problem with your bevel helical or planetary gearbox? We offer qualified repair service, spare parts, and new gearboxes! We will accept your defective gearbox as part exchange after inspection! Please send us your enquiry! Ffedpfx Aajqx Ur Djrjw

Condition: used, Year of construction: 2015, operating hours: 9,800 h, functionality: fully functional, EQUIPMENT DETAILS: Model: DW3060 Rotor: 21 teeth/bolted hammers ENGINE: MTU (Mercedes Benz) 450 HP Chassis: 3 axles with tandem wheels Hydraulic front support Remote control Auto-feed Rubber discharge belt Year of manufacture: 2015 Operating hours: 9800 h Fsdpfeyha S Iex Aarjfw Registration number: 67.04.152-1

Condition: new, Year of construction: 2025, Economical solutions with short delivery times Conveyor belts suitable for all common screening machines such as Doppstadt SM518 / SM618 / SM620 / SM720 / Terra Select T4-T7, Komptech Max, Mustang and others Ffsdpfjxmvplsx Aarew Conveyor belts suitable for all common shredders such as Doppstadt Bison / Büffel / Mamut, Biopower, AK 430, AK 235, AK 635 and others Manufactured according to your specifications: - Unlimited length - Width up to 1800 mm - 2, 3, or 4 material layers - Various profiles - Steel wire quantity: 10cm/ 35 +/-1 - in various material thicknesses Conveyor belts of the highest quality

Condition: used, Year of construction: 2006, No. 10034 2 pieces stationary single shaft shredder Doppstadt DW 2560 E1 Stationary single-shaft shredder Doppstadt DW 2560 E1 (1 of 2) Used, year of construction 2006 (overhauled by the manufacturer in 2024: new shaft / new gearbox / new bearings / etc.) Since overhaul approx. 600 operating hours Motor electric Approx. 20000 operating hours The scope of delivery does not include a conveyor belt Including replacement gearbox Filling width 1900 mm / Filling length 3060 mm Motor: Manufacturer T-T Electric / Type DC motor LAK 4250 C / Power 315 kW / Rated speed 2000 rpm / Armature voltage 460 V / Armature current 721 A / Field voltage 340 V / Field current 14.8 A / Degree of protection IP 55 / Cooling 2 separate motors Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / power 7.5 kW / rated voltage 380 V Cutting unit: drum / length 2500 mm / diameter 600 mm / speed 31 rpm Throughput: shredded material up to 40 t/h Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25665 kg Stationary single-shaft shredder Doppstadt DW 2560 E1 (2 of 2) Used, year of construction 2006 (overhauled by the manufacturer in 2024: new shaft / new gearbox / new bearings / etc.), fire damage December 2025 (drum condition good, gearbox condition good, motor condition unclear, control unit condition burnt down, hydraulic unit condition burnt down) Since overhaul approx. 200 operating hours Motor elektric Approx. 23000 operating hours The scope of delivery includes a conveyor belt The machine was used for bulky waste and wood Filling width 1900 mm / filling length 3060 mm Ffedpsym Edtjfx Aarow Motor: Manufacturer T-T Electric / type DC motor LAK 4250 C / power 315 kW / rated speed 2000 rpm / armature voltage 460 V / armature current 721 A / field voltage 340 V / field current 14.8 A / degree of protection IP 55 / cooling 2 separate motors Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / power 7.5 kW / rated voltage 380 V Cutting unit: drum / length 2500 mm / diameter 600 mm / speed 31 rpm Throughput: shredded material up to 40 t/h Longitudinal belt: length 7800 mm / width 1000 mm / discharge height 1680 mm / speed 1.8 m/s Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25665 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price reserved Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 2012, functionality: fully functional, overall weight: 25,300 kg, power: 210 kW (285.52 HP), For sale is a single-shaft shredder from Doppstadt. Ffsdoyrgibepfx Aarsw It is currently still integrated in our production and can be inspected on site. The conversion is scheduled to take place around the end of July 2026. All technical specifications can be found in the images. If you have any further questions, please feel free to contact us.

Condition: new, Year of construction: 2026, Belts and Accessories We offer top-quality conveyor belts suitable for all common screening machines and shredders. Custom-made to your specifications, we guarantee reliable performance and long service life. Suitable for Screening Machines - Doppstadt SM 518 / SM 618 / SM 620 / SM 720 - Terra Select T4 – T7 - Komptech Max - Mustang and other models Suitable for Shredders - Doppstadt Bison / Buffalo / Mammoth, Biopower, Inventhor - AK 430 / 510 / 635 - and other popular models Technical Features & Versions - Length: unlimited, tailored to customer requirements - Width: up to 1,800 mm - Number of plies: 2, 3, or 4 as required - Various profiles for optimal conveying performance - Steel cord quantity: 10 cm / 35 ±1 - Various material thicknesses available Your Advantages - Custom manufacturing according to your specifications - Superior quality for maximum service life - Short delivery times for rapid availability - Reliable performance for all common machines Contact us for a tailored quote and advice on conveyor belts for your application. Ffedpjyg D S Nefx Aarsw

Condition: refurbished (used), Year of construction: 2005, operating hours: 6,149 h, overall weight: 19,000 kg, Doppstadt DW 2560 Buffalo - Year of construction 2005 - Operating hours 6149 - Engine Mercedes Benz 354PS - Roller : 17 teeth Ffsdpfx Aoygnakoarjw - Overband magnet - Remote control - Hydraulic drive ( self drive) Machine is overhauled and immediately available

Condition: used, Year of construction: 2019, operating hours: 16,500 h, functionality: fully functional, machine/vehicle number: #005, overall weight: 46,100 kg, control cabinet length: 5,000 mm, control cabinet width: 2,400 mm, control cabinet height: 2,600 mm, power: 450 kW (611.83 HP), type of input current: DC, rotational speed (max.): 32 rpm, Equipment: rotational speed infinitely variable, Equipment - 450 kW DC power – with ABB frequency inverter including DTC control - Bevel helical gear unit – roller speed up to approx. 32 rpm / variable via belt drive and inverter control - BioPower roller with 42 teeth - Roller length 3,000 mm, Ø 800 mm - Infinitely variable speed control - Tooth type: form C3 trapezoidal tooth, 174 mm - Wear-resistant armor plates on the roller - Hydraulically adjustable counter comb – cutting gap adjustment via display - 4 comb cylinders - Central lubrication system - Hydraulically opening comb hatch - Pre-assembled main control cabinet - Local operator panel at the machine - Start-up warning system - Engine compartment lighting - Paint finish: RAL 2011 deep orange The machine is equipped with the following additional features: - Mounting strip for limiter - Limiter elements - Automatic comb positioning - Automatic comb cleaning system - Machine frame height: 1,200 mm - 3-sided hopper extension, left or right - Flashing light module - Solenoid valve for water spraying device - Radio remote control (EU) - Profibus integration - 2 additional power outputs on the control cabinet, up to 7.5 kW each - Control cabinet container / air-conditioned, LxWxH 5,000x2,400x2,600 mm Fsdpox I A Aksfx Aarofw The machine can receive comprehensive reconditioning at our factory upon request. - OPTIONAL ONLY: Discharge conveyor belt AA 8,350 x BB 1,200 mm, 5.5 kW, reversible Miscellaneous: - Display in German; English available - Stickers and operator panel labeling in German; English available - Warning stickers in German; English available - Operating manual in German (print and digital) (can be translated for local requirements)

Condition: ready for operation (used), Year of construction: 2023, operating hours: 3,200 h, functionality: fully functional, machine/vehicle number: 189, power: 310 kW (421.48 HP), fuel tank capacity: 500 l, TECHNICAL DETAILS Cutter drum with teeth: 30 Areas of application: Waste/Wood/Green waste MACHINE DETAILS Engine power: 310 kW (405 hp) Fuel tank capacity: 500 l Electrical system: 24 V Hydraulic connections: 35-80 l/min Fjdpfxoym U E Ho Aarofw Permissible total weight: 27,000 kg Load capacity protection: Three-sided Operating hours: 3,200 h EQUIPMENT Overband magnet Shredder drum with 30 teeth Caterpillar engine Load-dependent system Centrally arranged lubrication strips 24 V electronic control with additional electric pump Complete radio remote control Large maintenance doors on the sides Service-friendly engine compartment Hydraulically reversible fan Folding hopper Service staircase Acoustic start-up warning Doppstadt telematics system Special shredder system size L 600/4 - 30 Z Additional hydraulic connections Hydraulic drive Discharge conveyor Frame with overband magnet Magnet and combs

Condition: reconditioned (used), Year of construction: 2018, operating hours: 3,317 h, overall weight: 19,000 kg, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size on agreement) Rear discharge conveyor with magnet roll Fedpfet Egddox Aarofw Hydr. self propelled drive (for moving on site) Twin drive separate drives for scraper floor and infeed roller Radio remote control

Year of construction: 2014, condition: used, No. 10018 Mobile 2-fraction spiral shaft screen GÜNTHER / Doppstadt SPLITTER F2 Used, year of construction 2014 Fjdpfx Aaewhza Usrofw Approx. 3000 operating hours Incl. mobile deck 0/120 Screening of materials that are difficult to screen, such as commercial waste, bulky waste, mixed construction waste, scrap metal, slag, waste wood, organic waste, landfill deconstruction in 2 fractions - Drive: Generator type 50 kVA / voltage 400/230 V / frequency 50 Hz / speed 1500 rpm / fuel tank capacity 250 liters / diesel fuel - Feed hopper: length 2700 mm / width 2100 mm / loading volume 3 m³ - SPLITTER screen deck / spiral shaft deck AA 254: Length 6000 mm / width 2500 mm / drive 3 x 4.0 kW controlled via frequency converter / 180 mm pitch / separating cut 0-80/120 mm - Feeder belt FH: Length 3000 mm / Width 1200 mm / Drive 1 x 4.0 kW controlled via frequency inverter / Folded design, incl. hopper for receiving the discharge belt on the shredder / Chevron belt quality - Bottom grain collecting belt, longitudinal FC: Length 5600 mm / Width 1200 mm / Drive 1 x 3.0 kW / Permanent magnetic separation / Chevron 16 mm belt quality - Bottom grain collecting belt crosswise FC: length 1600 mm / width 1000 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile undersize discharge conveyor: length 4460 mm / width 1000 mm / drive 1 x 4.0 kW / can be extended by FE fraction / belt quality Chevron 16 mm - Oversize grain collecting belt FC: length 5300 mm / width 1200 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile oversize grain discharge conveyor: length 7350 mm / width 1700 mm / drive 1 x 5.5 kW / can be extended by FE fraction / discharge height 5000 mm - Control cabinet: Complete electrical control via a PLC in a central control cabinet (protection class IP55) / Control and visualization via Siemens S7 colour touch panel / Radio remote control with colour display for all travel and work functions - Mobility: Electric crawler/tracked chassis with rubber pads / Electro-hydraulic control of moving parts - Power generator: 50 kVA, water-cooled 4-cylinder diesel engine - Throughput: up to 60 t/h (depending on material) Transport dimensions approx. 13600 x 3000 x 3100 mm LWH Weight approx. 21000 kg Sold on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Errors in the description and price reserved Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: used, Year of construction: 2022, operating hours: 4,240 h, functionality: fully functional, Basic Package AK565: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on coupling Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted fenders) Permissible total weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard Exhaust discharged upwards Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank, 450 L Feed roller: length 1,690 mm, diameter 510 mm, fitted with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Dopplock system Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raising/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, releasing the drive) when engine is stationary Ffsdpoyhckmsfx Aarsw 24 V electrical control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh sizes between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Rear discharge conveyor, 4 m long, 1,800 mm wide “classic” Anti-magnetic centre section on the discharge conveyor Reinforcement plates (Hardox) on both sides of feed hopper sidewall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Finish: RAL2011 deep orange Optional Equipment: Hydraulic drive 600 L fuel tank Flail tip C1 “Bear Paw” with carbide insert Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separate drive for feed roller and scraper floor (“Twin Drive”) Duomatic coupling Smooth impact plate Fine shredding basket Delivery date by arrangement

Condition: ready for operation (used), Year of construction: 2023, operating hours: 119 h, functionality: fully functional, machine/vehicle number: 217, fuel tank capacity: 500 l, conveyor belt speed: 3,000 mm/s, filling opening width: 3,374 mm, Doppstadt Inventhor 6 with only 119 operating hours and comprehensive additional equipment! TECHNICAL DETAILS Number of shredding teeth: 20 Shredding system type: Size L Feed hopper loading height: 3,650 mm Feed hopper loading width: 3,374 mm Rear discharge conveyor Width: 1,000 mm Length: 7,000 mm Discharge height: 4,209 mm Belt speed: 1.25 – 3.0 m/s Cross conveyor length: 2,900 mm Cross conveyor width: 800 mm MACHINE DETAILS Chassis: 3-axle drawbar trailer unit Drive Engine type: Diesel-hydraulic Brand: MTU 6R1000 Rated power: 260 kW (353 hp) Emission standard: Stage V Fuel tank capacity: 500 l Transport dimensions (L x W x H): 9,141 x 2,540 x 3,604 mm Permissible total weight: 25,000 kg Permissible axle load: 9,000 kg per axle Operating hours: 119 h EQUIPMENT Basic Inventhor Type 6 package Load-sensing system Centrally arranged lubrication strips 24-V electric control - additional electric pump for operating the following functions when the engine is off: - Raise/lower/fold rear discharge conveyor - Open/close comb flap - Open/close comb - Raise/lower folding hopper Full radio remote control Large side GRP service doors Service-friendly engine compartment LED lighting package for engine compartment and rear Hydraulically reversible cooling fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Shredding system Size L - 20 teeth Size L limiter Auxiliary hydraulic connection 35 - 80 l/min Hydrostatic drive 350 mm hopper extension, dual-sided watering provision 7 m rear discharge conveyor Fsdsyg Iraepfx Aarsfw Neodymium cross belt magnet Frame for 7 m cross belt magnet

Condition: new, Year of construction: 2026, Screen drums – highest quality across Europe – compatible with all common screening machines We offer screen drums in top European quality, suitable for the following models: Doppstadt SM 314 / SM 414 / SM 518 / SM 618 / SM 620 / SM 720 / SM 725, Terra Select T4 – T7, Komptech Maxx, Mustang, Nemus, Cribus, Pronar, Terex, Neuenhauser, and many other types. Technical features & versions: Manufactured to your individual specifications Perforation: variable, round or square Arrangement: staggered or straight Minimal web widths for maximum screening performance Integrated spirals for optimal material conveyance Various material thicknesses available Sharp-edged perforated sheets made from high-grade special steel Your benefits: Top quality Europe-wide MORE THAN 70 screen drums available immediately from stock Delivery within Germany (EU-wide on request) Fodpfx Aasymflkjrefw Short delivery times and fair prices Contact us for your individual quote!

Condition: good (used), Year of construction: 2022, operating hours: 600 h, functionality: unexamined, Equipment: Methor chain basic package without shredding system - Crawler chassis including 2 driving speeds - Chassis chain 400mm 3-bar - Additional hydraulic connection 70 l/min - 24-V electric control - Large radio remote control complete - Maintenance-friendly engine compartment with LED light - Folding funnel with path sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Special equipment: Shredding system size L (8 teeth) Engine Cat C7.1, 205 kW Ffsdevrz Rvopfx Aarsw Rear conveyor 6.9 m Frame for overband magnet Overband magnet Irrigation

Condition: used, Year of construction: 2021, operating hours: 4,826 h, Equipment: Basic package Inventhor Type 9 MTU diesel engine 6R1300, 390 kW at 1,700 rpm meets EUROMOT V emissions standard Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW – VARIO - Load sensing system Fuel tank 950 liters Longitudinal belt: belt length 4,450 mm, belt width 1,000 mm Ffodpfx Asvnmldearew Centrally arranged lubrication strips 24 V electric control Additional electric pump for operating the following functions when the engine is not running. Raise/lower/fold rear belt, open/close comb flap, open/close comb, raise/lower optional permanent magnet belt, raise/lower optional folding funnel Radio remote control complete Large side GRP maintenance doors Maintenance-friendly engine compartment with LED light Hydraulically reversible fan wheel Loading protection on both sides Fire extinguisher Maintenance ladder Tool box Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 deep orange Special equipment: 500 mm chain chassis unit Chain chassis 500 mm flat Crushing system size "L" -VARIOMAT Size "L" - "Limiter" (20 pieces) Rear conveyor length 7 m 1200 mm wide LED light package engine compartment and rear Irrigation with funnel attachment H=300mm Frame for overband magnet Overband magnet 2 t permanent

Condition: good (used), Year of construction: 2022, operating hours: 2,100 h, functionality: fully functional, Equipment: Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: length 2,900 mm, width 800 mm Centrally arranged lubrication strips 24V electronic control – additional electric pump to operate the following functions when the engine is off: "raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Ffodpfx Aownfwqoarjw Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special Equipment: Powertrain 310 kW - EV 3-axle drawbar trailer chassis unit Shredding system Size L 600/4 - 30 Z Additional hydraulic connections 35 - 80 l/min Hydraulic drive Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: good (used), Year of construction: 2020, operating hours: 881 h, functionality: unexamined, Equipment: Methor chain basic package Ffodpovnmmzjfx Aarew Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding funnel with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the roller Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3