Used Double Mitre Saw for sale (17,888)

Condition: used, Year of construction: 2004, cutting width max. 700 mm Cutting height max. 120 mm Klodpfx Absx Eblvs Tsn saw-blade dia. max. 700 mm

Condition: used, Year of construction: 2022, Cutting height 260 mm Kledpfx Abox Ditfs Ten sawing motor 7,5 kW saw-blade dia. 500 mm feed max. 250 m/min

Condition: used, cutting width max. ca. 600 mm Kedpfjxrtzpox Ab Teln Cutting height max. ca. 120 mm feed pneumatisch m/min

Condition: used, cutting width 380 mm Cutting height 85/40 mm machine weight ab. 50 kg Combined pull-through and table saw Graule AGT. The pull-through saw can be tilted and swiveled. The machine can also be used as a pull-through saw only by removing the table. Ksdswqphljpfx Ab Tjln

Condition: used, Cutting height max. 100 mm cutting width max. 100 mm impulse time ca. 4 Sekunden Kljdov Hp Hbopfx Ab Tjn Himmel HF120 miter jointing machine for precise and secure gluing of miter joints in wooden frames, glazing bars, and moldings with white glue. The machine enables fast setting times thanks to high-frequency technology, pneumatic pressing mechanisms, and precise alignment of the workpieces. Ideal for furniture and picture frame construction. The glue must be applied manually, as the machine does not have a glue reservoir. Operation: Foot switch Possible angles: 90°, 120°, 135°

Condition: good (used), Double Mitre Saw DG79 - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 - 2100 / 3800 rpm - Saw blade Ø 330 mm Kljdpjygm Akofx Ab Ton - Cutting range at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg - Pneumatic clamping system

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 1050126700, functionality: fully functional, saw blade diameter: 420 mm, total length: 160,000 mm, total width: 2,000 mm, overall weight: 750 kg, saw blade speed: 2,800 rpm, section length (max.): 7,000 mm, section length (min.): 50 mm, Equipment: saw blade guard, elumatec Profile Sawing System Overall footprint: Width x Length: 2.0 x 16.0 m comprising: elumatec Mitre Saw MGS 105 Klodpeykmbnjfx Ab Tjn ----- Manual swivel range, 22.5° left and right with E 111 digital display Pneumatic tilt range from 90° to 45° Cutting area: see cutting diagram Saw blade diameter: 420 mm Saw blade speed: 2,800 rpm Electrical connection: 230/400 V, 3~, 50 Hz Output power: 4 kW Compressed air connection: 7 bar Air consumption per cycle: 20 l without spray, 32 l with spray Length 1,400 mm, depth 1,500 mm, height 1,880 mm, weight 750 kg elumatec Stop and Length Measuring System AMS 200/08 Model No. 2000826770-12/14 Length: 7,500 mm (custom version) Measuring range: min. 50 mm / max. 7,000 mm Configuration: installed to the right of the saw Technical data: - Drive-independent measuring system - Positioning accuracy +/- 0.1 mm per meter - Pneumatic locking at position - Drag chain cable guidance elumatec Control E355/P Control system for AMS 200 Matrix display with membrane keypad Operating menu 1. Single saw cycle 2. Record set for data sets Record memory allows input of set number, length, profile number, angle position, and quantity Optional printer interface elumatec Infeed Roller Conveyor (left of saw) Total length 6.0 m (consisting of 2 units of 3,000 mm each)

Condition: good (used), Code: 0228 Brand: OMS SALVARANI Model: 300 INVINCIBILE Pneumatic double croscutting machine for cutting wood, frames, fixtures, joinery, furniture, and various other materials Technical data: Working length mm 3000 Blade diameter mm 300 Motor power Hp 2,5 - Rpm 3000 Manual movement of the 2 heads Cutting from 0 to 45° right and left Ksdpfx Asxnxumeb Toln Pneumatic pedal for lowering the heads N° 2 pneumatic clamps for locking workpieces N° 2 suction ports diameter mm 50 Compressed air 6 bar Overall dimensions mm 4000 x 700 x 1250 h Weight kg 520

Condition: good (used), Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Klsdpfxsuiwqhs Ab Ton Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Condition: good (used), Code: 0236 Brand: FOM INDUSTRIE Model: BLITZ ALVA 450 - CE Standard Double-head electropneumatic sawing machine for cutting and machining aluminium profiles, plastic, light alloys, pvc - CE Standard Useful cutting length mm 4000 Vidia blade diameter mm 450 F32 Three-phase motors Hp 3 - Revolutions/min 2800 Head inclination: 90 degrees - 45 degrees external - 22,5 degrees external - Intermediate graduation with mechanical stop and reading on graduated vernier scale Kodpfx Aoxv Dfasb Tsln First head fixed Second head mobile: automatic positioning with manual option - Automatic head positioning speed 12 mt/min Movable head positioning accuracy: +/- 0,1 mm Minimum cutting capacity between the two heads: 300 mm Maximum cutting capacity between the two heads: 4000 mm Hydropneumatic blade feed (adjustable output speed - rapid retraction) Vertical and horizontal pneumatic clamps Spray lubrication of the cut Mobile head roller conveyor 3 mt Operating pressure 7 bar Suction mouth diameter mm 100 Overall dimensions mm 5760 x 1600 x 1950 h Weight kg 1550

Condition: excellent (used), RAIMANN KD31 double-shaft multi-saw - after the technical review - German production Ksdpeg Db U Aofx Ab Tjln - year of production 1988 TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm Klodpfx Aeq Ii Dleb Tjn diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Year of construction: 2008, condition: excellent (used), Double-head band saw LIGNUMA MM-700/2 PION – Polish production TECHNICAL PARAMETERS: min. diameter of the processed log 150 mm max. diameter of the processed log 600 mm min. length of processed log 1200 mm max. length of processed log 3000 mm input table length 3500 mm main engine 2 x 11 kW feed motor 0.75 kW cutting system adjustment motor 2 x 0.37 kW smooth feed adjustment band saw length 4010 mm Klsdpfxsi Ezwme Ab Tjn band saw width 32 - 50 mm band saw thickness 0.9 - 1.25 mm module 22.2 mm cutting thickness programmer hydraulic tensioner of the band saw dimensions (length/width/height) 6000 / 2600 / 2100 mm weight 1700 kg

Condition: used, Year of construction: 1977, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, height adjustment type: electric, actuation type: electric, We are offering this used Rüco 22 double mitre saw, year of manufacture 1977. Type: 22 Klodpeykvttofx Ab Tsn Year of manufacture: 1977 Order no.: 95.15610 Machine no.: 10364 Operating voltage: 380V • Working length: 3.0 m • Electric width adjustment • Saw swivels BOTH SIDES • Maximum cutting depth: 3.40 m • Equipped with extraction fan If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: new, Saw unit swivels 46 ° on both sides. Programmable, electric saw blade adjustment Kodpfx Aed Akygeb Teln Control unit with electronic display for saw blade tilt and lift Torsional rigidity and vibration-free working Easier plate feeding due to large trimming frame with roller Telescopic ruler with 2 professional folding stops Excellent cutting precision scoring unit equipped with its own motor - easily adjustable from the outside saw blade diameter of 400 mm scoring saw blade with a diameter of 160 mm 2-position saw blade pendulum protection manell adjustable 3-axis controlled Motorized rip fence with electronic positioning includes: Position display via an encoder Adjustment via ball screw Stepless adjustment via switch or automatic positioning system Cutting width 1270 mm Programmed movement of motorized adjustment and tilting for saw unit UP version with swivelling control panel for maximum flexibility X version with Compex miter fence for quick and accurate execution of miter cuts with automatic compensation of the stop position. (Length compensation) incl. options: - cutting lenght 3200 mm - on / off buttons for main motor and scoring unit integrated in saw carriage - CompeX frame - Version "READY 3 UP" - 2 saw speeds (3500/5000 U/min) Max. cutting width with rip fence 1270 mm Format cuts 3200 mm main motor 7,0 kW, 400 V, 50 Hz Saw blade angle -46 - 46 ° Max. cutting height 90° 136 mm Max. cutting height 45° 97 mm Max. cutting height -45° 60 mm saw blade diameter 400 mm Diameter scoring saw blade 160 mm (Main) saw blade speed 4000 min¯¹ Dust extraction ports 120 & 80 mm

Year of construction: 1997, condition: used, functionality: unexamined, Emmegi Classic Single TU/4 double head saw with infeed and outfeed roller conveyors, s/n 242937 (1997) This lot is located in Farnworth, Bolton. Collection must be made on Tuesday 3rd March 2026. Kljdpfx Ajyg Rfvjb Ten

Year of construction: 2007, condition: used, functionality: unexamined, Elumatec MGS 105/01 single head mitre saw with cut to length system, E111 digital display, E555 control, infeed and outfeed roller conveyors, s/n 1050126588 (advised 2007) This lot is located in Farnworth, Bolton. Klsdpfx Absyg Rfce Ten Collection must be made on Tuesday 3rd March 2026.

Condition: used, Year of construction: 2003, functionality: unexamined, Pertici Univer 500D2K double head saw with infeed and outfeed roller conveyors, s/n 03D131 (2003) This lot is located in Farnworth, Bolton. Kljdpfx Absyg Rd Ss Tsn Collection must be made on Tuesday 3rd March 2026.

Condition: excellent (used), Year of construction: 2013, - Tools Ø 500 mm - Blade speed 2800 rpm Kjdpox N R H Tsfx Ab Teln - Weight approx. 1500 kg

Condition: excellent (used), Year of construction: 2014, - Tools Ø 500 mm Ksdpfx Abox N R Iqj Tjln - Blade speed 2800 rpm - Weight approx. 1600 kg

Year of construction: 2001, condition: used, functionality: fully functional, machine/vehicle number: 5 06 10 / 157, Shoot saw with contour milling unit Weight: 105 kg Saw blade speed: 2750 rpm Compressed air: 6 ... 8 bar/hPa Klodpfeyi Dl Usx Ab Ten Pneumatic clamping: via foot switch L/W/H: 1000 mm x 2200 mm x 900 mm Voltage: 400 V/50Hz

Condition: used, working width 1.700 mm Kjdpfx Aeycqigob Tjln saw-blade dia. 350 mm cutting length 1.200 mm

Condition: used, Hüllhorst DH54S Machine number: 03974 Circular saw drive: a) 2 motors: 5 HP each b) Speed: 3000 rpm c) Circular saw diameter: 400 mm d) Circular saw blade thickness: 2.6 mm e) Circular saw bore: 35 mm Working range: a) Standard machine: 2200 mm cutting depth and 2200 mm cutting width Klodpfxsxrzfve Ab Ten b) Custom cutting depth: up to 2500 mm c) Custom cutting width: up to 3000 mm d) Minimum cutting width: 210 mm e) Maximum cutting height: 100 mm

Year of construction: 2007, condition: ready for operation (used), Saw blade diameter: 450mm, cutting range 90° round/ square/ profiles: 160/ 145/ 320x50mm, cutting range 45° round/ square/ profiles: 160/ 130/ 250x40mm, cutting speed: 1950/ 3900m/min, feed speed: 0-3000mm/min, mitre range: 0° to 90°, swivel range: 180°, weight: approx. 1.5t. On-site inspection is possible. Kjdpfx Aewa Tileb Toln

Condition: ready for operation (used), A total of seven circular metal saws from Kaltenbach and Adige are available. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. On-site inspection is possible. Kodewt Tkvjpfx Ab Toln