Used Double Z Kneader for sale (32,131)

Condition: used, Year of construction: 2016, operating hours: 762 h, functionality: fully functional, machine/vehicle number: 10022447, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, KUKA KR 30-3 robotic workstation with KRC4 controller and SmartPad. Operating time: only 762 hours. For sale: a complete robotic workstation based on the KUKA KR 30-3 industrial robot, equipped with a KRC4 controller and a KUKA SmartPad operator panel. The unit comes from a research and development laboratory and was used for testing and industrial automation projects. As a result, the robot has very low operating hours, totaling only 762 hours. This workstation is an ideal solution for system integrators, technical universities, R&D departments, and companies implementing automation and robotics solutions for processes. Technical data: Manufacturer: KUKA Model: KR 30-3 Year of manufacture: 2016 Payload: 30 kg Reach: 2033 mm Controller: KUKA KRC4 Operator panel: KUKA SmartPad Operating time: 762 h Controller power supply: 3x400 V Installed software options: EthernetKRL Profinet KRC-Nexxt RemoteService RobotSensorInterface Technical condition: The robot starts up correctly, and communication with the controller works properly. The visual condition is very good. The unit comes from a research and development project and has not been used in continuous industrial production. Included: KUKA KR 30-3 robot KRC4 controller KUKA SmartPad operator panel Cabling as shown in the pictures Additional information: The workstation can be expanded with: - pneumatic or electric grippers, - vision systems, - safety fences, - safety gates, - light curtains, - additional industrial automation equipment. More products are available at tobesold.eu. Before shipment, the unit undergoes technical verification. A demonstration of the unit's operation is available by prior appointment. Iisdpfx Aoziciwen Nef

Condition: used, Webomatic Mobile Double Chamber Vacuum Packer Type: CD 120-PR Serial number: 5710JL525 400 V, 3 Ph, 50 Hz, 5.0 A, 2.2 kW Seal length: (2x) 640 mm Dimensions chamber: (2x) 650 mm x 570 mm Busch vacuum pump Iiedoym U Inopfx An Nof Total dimensions: 1420 mm x 840 mm x 1060 mm.

Condition: used, XSK-400 Rubber Mixing Mill – Two-Roll Open Type | Wuxi Double Elephant Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XSK-400 Country of Manufacture: China Technical Data: Roller Diameter: 400 mm Working Width: 600 mm Roller Speed ​​Ratio: 1 : 1.35 Front Roller Speed: 17.45 m/min Main Motor Power: 45 kW Ijdpexrdgvjfx An Noif Motor Speed: 980 r/min Voltage: 380 V Frequency: 50 Hz Batch Capacity: Approx. 20-30 kg Machine Weight: Approx. 7,000–8,000 kg Description: The XSK-400 Mill for Rubber is a high-quality two-roll open mixing mill manufactured by Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. (China). Designed for rubber compound mixing, warming, and sheeting, this machine ensures stable performance, precise temperature control, and long-term durability. Perfect for industrial rubber production, hose and seal manufacturing, and laboratory compound processing. Main Features: Heavy-duty chilled cast iron rolls with excellent hardness and finish Water-cooled drilled rolls for temperature stability Low-noise hardened gear transmission for smooth performance Motorized nip adjustment for roll spacing precision Safety stop controls and reliable electrical components Durable construction, easy maintenance, and long service life Applications: Rubber and silicone compound mixing Plastic and rubber sheeting Hose, gasket, and belt manufacturing

Condition: used, Year of construction: 1999, functionality: fully functional, clamping force: 400 kN, screw diameter: 30 mm, clearance between the columns: 250 mm, column diameter: 50 mm, opening stroke: 480 mm, plate length: 450 mm, plate height: 500 mm, total length: 2,200 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 2,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Complete plastic molding line OLEOPRESS OP/Z 40 press + 3M OPZ 50 oven + PGV thermoregulator For sale: a complete line for plastic molding, consisting of: OLEOPRESS OP/Z 40 hydraulic injection press 3M OPZ 50 industrial electric oven PGV RHC7 mold thermoregulator Machines are in working order and can be inspected on site. INJECTION PRESS Manufacturer: OLEOPRESS S.r.l. (Italy) Model: OP/Z 40 Year: 1999 Clamping force: 400 kN (40 tons) Configuration: Horizontal – 4 columns Technical data: Distance between columns: 250 × 300 mm Column diameter: 50 mm Maximum opening stroke: 480 mm Plate dimensions: 400 × 500 mm Cylinder heating capacity: approx. 6–8 kW Power supply: 400 V – 50 Hz – 100 A – three-phase Air line pressure: 10 bar Estimated weight: approx. 2,800 kg INDUSTRIAL OVEN Manufacturer: 3M Forni Industriali (Italy) Model: OPZ 50 Power supply: 400 V Installed power: 36 kW (18 + 18 kW) Maximum temperature: 650°C High-temperature industrial electric oven, suitable for: mold preheating post-curing polymerization of thermosetting materials MOLD THERMOREGULATOR Manufacturer: PGV srl (Italy) Model: RHC7 Iodpfxozpbc Aj An Nsif Power supply: 400 V Rated current: 28.6 A Interrupting capacity: 17.6 kA Unit for controlling mold temperature during the production cycle.

Year of construction: 2019, condition: ready for operation (used), An eroding island consisting of two die-sinking EDM machines and an automation system is available. 1) Zimmer & Kreim ZK Genius 700, year of manufacture: 2015, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator output: 96A, path eroding: CIMCO, operating hours: 22056h. 2) Zimmer & Kreim ZK Genius 700, year of manufacture: 2019, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator power: 96A, path eroding: CIMCO, operating hours: 8255h. 3) Automation Zimmer & Kreim Chameleon Quad, year of construction: 2015, electrode positions: 176, pallet positions with loading drawer: 9, double rotary gripper for Erowa ITS and single gripper for UPC pallets. Overall system dimensions X/Y: approx. 3000mm/6200mm. Including a Kraft & Bauer fire extinguishing system with suction device. Documentation available. On-site inspection is possible. Iiedpfxswdwztj An Nef

Condition: used, mileage: 235,000 km, power: 126 kW (171.31 HP), fuel type: diesel, gearing type: automatic, first registration: 09/2008, emission class: euro4, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, had accident, immobilizer system, * Nissan Navara Pick Up Double King Cab XE 4x4 – Passenger Car Registration – * 2.5 l Diesel – Displacement: 2,488 cc – 126 kW / 176 hp – Euro 4 – Green Emissions Sticker – * ATTENTION: VEHICLE HAS A TRANSMISSION ISSUE – WHEN WARM, 4TH AND 5TH GEAR MAY OCCASIONALLY JUMP OUT – CAUSE UNKNOWN – VEHICLE IS DRIVABLE – SOLD AS IS, IN CURRENT CONDITION – * VIN: VSKCVND40U0329130 – German vehicle – German registration document – * Tow bar with 2,600 kg braked towing capacity – 750 kg unbraked – * Vehicle available immediately – Preferred sale to trade / export / commercial operators * Viewing by appointment only – * Contact person: Mr. Andreas Vogel * The information provided online is a non-binding description. * They do not constitute warranted characteristics. * The seller assumes no liability for typographical or data transmission errors. * Subject to prior sale, changes, and errors. Special Equipment: Metallic paint, Topline package Additional Equipment: Ijdpfx Anexgldro Neif Driver and passenger airbags, active front head restraints, steering wheel audio/radio controls, automatic headlight activation, electrically adjustable and heated exterior mirrors, exterior mirrors with ground lighting, exterior mirrors with chrome trim, outside temperature display, integrated indicators in exterior mirrors, Bluetooth interface, Nissan Brake Assist system, 6-disc CD changer, roof rack, limited-slip differential, aluminum entry sills, electronic brakeforce distribution (EBD), electric front and rear windows, side protection, Bluetooth hands-free kit, front footwell lighting, center console cup holders, seatbelt pretensioners, leather handbrake lever, heated rear window, auto-dimming interior mirror, ISOFIX child seat mounts, body/cabin: double cab, body: pick-up, 2-zone automatic climate control, Comfort package, chrome front grille, lumbar support driver’s seat, height-adjustable steering column, alloy wheels, engine 2.5 l – 126 kW dCi Diesel CAT, radio preparation, 6 speakers, wheelbase 3,200 mm, full-size spare wheel, split/folding rear seat, leather gearshift/selector lever, height-adjustable front seatbelts, height-adjustable driver’s seat, sun visors with mirrors, 12V socket in center console, chrome rear bumper, partially body-colored bumpers, side steps, interior chrome door handles, tinted windows, dark-tinted rear windows, UV-protection glazing.

Condition: ready for operation (used), Year of construction: 1968, functionality: fully functional, GRAFFENSTADEN ARF 114 Z boring machine, photos and descriptions attached Machine in perfect mechanical and electrical condition Longitudinal travel: 2 m Transversal travel: 2 m Vertical travel: 1.75 m Spindle diameter: 115 mm Spindle stroke: 900 mm 1 Graffenstaden universal head 1 Andréa rotary table 1 extension 1 3-axis digital readout 2 feed ranges via variator for all movements Numerous tools included Machine can be seen in working condition Iiodpeyzm Dfofx An Njf Machine to be dismantled on site Tel: 03.80.92.23.28 or 03.80.92.34.03 or 06.79.58.06.79

Condition: used, Year of construction: 2004, functionality: fully functional, Double Edger, 2600 x 5000 mm Isdpfjzqaxfex An Nsif

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: - track width: 340mm - shaft width: 360mm - blade bore diameter: 70mm - max. blade diameter: 315mm - max. cutting height: 180mm * from above - feed shaft, toothed, pneumatically pressed - 2 rows of kickback fingers - 3 smooth pressure slip rollers - kickback fingers - shaft with saw blades - 3 smooth pressure slip rollers - kickback fingers * from below - infeed traction shaft, toothed - track - shaft with saw blades - track - stepless feed speed regulation via inverter - main motor 2x55kW Ijdpfx Aozrmpysn Njif - feed motor 4kW - electric lifting of upper body up/down - electric adjustment of saw blade shafts - central lubrication - extraction port diameter: 2x150mm - dimensions (L/W/H): 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES – Italian production – double shaft – ideal for large elements – used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,740 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: good (used), Hang 150 Double-Head Riveter for Binders Manufacturer: Hang Germany Machine has been overhauled and is ready to use. The machine is used for riveting all types of ring mechanisms. Two riveting heads with adjustable spacing. Cardboard thickness: 0.2-4mm Throat depth: 310mm Head spacing: adjustable from 35-440mm Cycle time: 0.5s Weight: 570kg Iodpfxozhkivj An Nsif Power supply: 380V The cycle is initiated by a foot pedal.

Year of construction: 2024, condition: used, functionality: fully functional, The electric double fryer with a capacity of 14 + 14 liters and a cabinet base, model Z7FREH2E00, is an excellent choice for professional kitchens or markets. The unit features high performance and enables the simultaneous frying of large quantities of food. This double fryer is specifically designed for intensive use in catering establishments or high-traffic TO GO sales outlets. You will receive an invoice with VAT shown. Technical data: Dimensions in mm: external (W x D x H): 800 x 720 x 942 Tank (W x D x H): 240 x 380 x 285 Cabinet (W x D x H): 680 x 640 x 420 Model designation: Z7FREH2E00 Serial number: 4082149208 Performance data: Tank: 2 x 12-14 liters Connection value: Electric: 17.4 kW / 3N / 400 V Temperature specifications: Operating temperature: 105 to 185 °C Weight specifications: Gross weight: 83 kg, Net weight: 81 kg Year of manufacture: 2024 Iisdszvavzopfx An Nof Condition: Used, fully functional (operated for 2 weeks) Equipment: Electric fryer as a stand-alone unit with 2 directly heated standard tanks, each with a capacity of 14 liters 1.5 mm thick front and top plate made of CNS, side and rear panels made of stainless steel, Scotch-Brite finish, edges rounded on both sides Standard tank with directly heated, internal heating elements Operating temperature from 105 - 185 °C, thermostatically adjustable Filling volumes: min / max: 12 / 14 l per tank Height-adjustable feet (+50 mm) Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality brand-name equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional - or money back Shipping or self-collection can be flexibly selected Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have questions, would you like a consultation, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 1961, turning diameter Max. 4200 mm faceplate diameter 3700 mm turning height Max. 2600 mm workpiece weight Max. 35 t Power 80 PS DIGITAL CONTROL DISPLAY Largest diameter with the crossbeam supports: 4200mm Largest turning diameter with side support: 3900mm Largest turning height above faceplate: 2500 Iedpeuddnvjfx An Neif Side support 1 vertical grinding ram: 1200mm stroke (out of operation) 1 turning ram: 1400mm stroke

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 3458 F, working width: 2,500 mm, Double tenoner FRIULMAC 2003, 3+3 heads Isdpfx Ansx Rdrfe Noif

Condition: used, Poly-Clip PDC-A 600 R Automatic Double Clipper This automatic double clipper from Poly-Clip is ideal for clipping medium to large production volumes. With a wide caliber range of up to 90 mm, this clipper is perfectly suited for processing plastic, fibrous, collagen, and natural casings. The PDC-A 600 R has been specifically designed for delicate natural casings as well as ring and half-ring sausage applications, such as bologna, chorizo, blood sausage, and liver sausage. With the PDC-A, a wide range of products can be produced efficiently, including single sausages and chains, long sausages, half-rings, and rings. The hygienic design allows for easy and efficient cleaning. The clipper can be connected to various vacuum fillers, including Handtmann, Frey, Vemag, Risco, Düker Rex, and Karl Schnell. It is an ideal machine for the sausage industry, butcher shops, and catering companies. The clipper is completely manufactured from stainless steel. Technical specifications: - Caliber range: 20–90 mm - Clip types: S 625, S 628, S 632, S 638 - Automatic clip feeding: S-clip coil - Automatic looper system: GSE - String dispenser: included - Pneumatic knife: included - Height adjustable: 1,795–2,005 mm - Voltage: 230 V (1+N, 50 Hz) - Power: 0.1 kW - Weight: 147 kg - Year of manufacture: 2017 - Compressed air connection: 6 bar - Machine dimensions (W × D × H): 1,100 × 800 × 1,930 mm Isdszvdhhepfx An Njif

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: C0202166, We offer this used Fom Industrie BLITZ ALVA 500 double miter saw, manufactured in 2011. Manufacturer: Fom Industrie Iodpfx Anjzh A Tgo Njif Model: BLITZ ALVA 500 Year of manufacture: 2011 Condition: used Category ID: 804 Type ID: 1498 Machine type: Double miter saw If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2012, Ref:11095 . 2012 ‘Heidelberg’ Stahl TH82/442K-RFH High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. • SAK-66 shingle belt delivery table. Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit. VFZ mobile electronic ‘Z’ knife fold unit. Folding sequence: 1st buckle unit - with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - with 2 plates, perforating/scoring shafts VFZ mobile electronic knife fold. Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Isdsy Hixvspfx An Nsif Min: 14 x 18 cm.

Condition: used, Year of construction: 2020, Used, heated/cooled pressure vessel Article number: 10901 Last known use: Unknown Volume: 1200 liters Type: Standing, on 3 legs Material (media-contacting): 1.4301 / AISI 304 Dome lid: Ø 400mm Max. operating pressure: +1.27 / -0 bar Operating temperature: +50 / -10 °C Design: Double-walled Vessel dimensions: Outer diameter: 1000mm Isdpfxjzuw Ske An Nsif Cylindrical height: 1150mm Overall width: 1000mm Overall length: 1150mm Overall height: 2750mm Materials: Inside: 1.4301 / AISI 304 External parts: 1.4301 / AISI 304 Features: Outlet diameter: 25mm Distance from outlet to floor: 325mm / 825mm Height of legs: 1240mm Nameplate: yes Nozzle on the top head

Condition: like new (used), Year of construction: 2021, operating hours: 730 h, functionality: fully functional, clamping force: 2,700 kN, nominal power: 22 kW (29.91 HP), operating pressure: 265 bar, We offer this like-new DESMA D 969.250 Z (S3) rubber processing machine, manufactured in 2021. Closing force: 2700 kN Injection volume: 500 cm³ Injection pressure: 3500 bar EUROMAP size: 2700-1750 Voltage: 400 V Frequency: 50 Hz Short-circuit current max.: 10 kA Total current: 138 A Pre-fuse: 160 A Pump pressure: 265 bar Pump drive flow rate: 72/39 l/min Pump drive power consumption: 32.0 A Pump drive power: 22 kW Nozzle system force: 58 kN Weight: 10.7 t Compressed air volume flow: 0.5 m³/h Iiodpjzgvxyefx An Nef Compressed air pressure: 6 bar Cooling water volume flow: 1.6 m³/h Cooling water temperature max.: 20 °C Operating hours: hydraulic motor: 730 hours, hydraulic pump (closing force): 65 hours, operating system: active 3,360 hours Ideal for the production of: • technical rubber molded parts • seals and O-rings • automotive and industrial components Condition & Availability: • Machine is available for immediate delivery • Condition: very well maintained / regular servicing • Inspection possible by arrangement Other: • Documentation and accessories available on request • Assistance with disassembly / loading / transport can be arranged If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2018, operating hours: 3,000 h, travel distance X-axis: 3,200 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, table length: 3,000 mm, spindle speed (min.): 4,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 10, Equipment: rotational speed infinitely variable, CNC drilling/milling machine No CNC knowledge required, extremely easy to operate Tool holder: Laip Coolant system Automatic tool changer for 10 tools Automatic tool length measurement Data import: DXF Electronic handwheel Light curtain on the operator side Spindle motor: 7.5 kW Spindle speed: 200-2000 RPM Iisdpfx Anozqvbpj Nef Touchscreen: 21.5" Factory inspected

Condition: like new (used), functionality: fully functional, Year of construction: 2010, The line is from 2010. Modernization is being done in 2020. ZEMAN CZS LINE SPECIFICATIONS ZEMAN's flagship product, the fully automated "PURLIN" line, is used to produce open, cold-formed sections such as C, Z, and SIGMA, in various widths and shapes, thanks to fully automatic adjustment of the profiling rollers. Coils up to 750 mm wide and 1.25 mm to 3 mm thick sheet metal in grade S-390 and lower can be used as raw material. The machine is designed to produce components up to 15 m long. The width of the specially hardened profiling rollers is infinitely adjustable, using only dedicated software. A fully integrated "flying punching" device creates all types of mounting holes, and the entire process is continuous, meaning the material does not stop for individual operations such as punching holes or cross-cutting. To maintain production efficiency, the line speed is dynamically optimized. The machine decelerates and accelerates automatically without operator intervention. A coil uncoiler with a maximum working load of 15 tons is mounted on a mobile trolley, enabling precise centering of the material strip before feeding it into the straightener. The straightener, along with a crescent straightening system, allows for straightening the material, ensuring the required sheet flatness and reducing the crescent on the feed belt. 2. Punching Section This section contains 5 double, "flying" punching portals, which can be equipped with 20 small (up to 40 mm) or 10 large (up to 100 mm) tools (punches and dies) for punching mounting holes. A combination of these tools can also be used. 3. Pre-cutting Shear A "flying" shear used to make preliminary holes for the cutting shear. This process is designed to maintain material continuity, resulting in a more precise profile shape, especially at its beginning and end. This is an adaptive guillotine that adjusts the width of the hole being cut to the width of the sheet metal strip. 4. Guide Carriage/SIGMA Modules The guide carriage is used to center the sheet metal strip before entering the profiler. It is interchangeable with the module for producing Sigma-shaped profiles. To produce S+ profiles, the guide table should be removed and two Sigma modules inserted. These modules position fully automatically and independently, left and right. 6. Rotary Cut-Off Guillotine. The rotary cut-off guillotine with hook knives is used to finally cut the profile from the material strip Iisdpfx Aeymampen Njf using the holes made by the pre-cutting guillotine. This is a "flying" guillotine, so the sheet metal does not stop during the cutting process. Depending on the profile being produced, a properly oriented cutting cassette should be attached. 7. Receiving Table The receiving table is used to automatically discharge the completed profiles from the roller conveyor. The elements are then manually arranged into a package. The design allows for easy bundling of the package. The table is designed to accept 15-meter profiles and allows for access by a forklift or overhead crane to collect the package of profiles.

Condition: used, functionality: fully functional, Oil mist extraction for CNC machines, Agfa / ABSOLENT separator filter Fan power: 0.63 kW Inlet diameter: 160 mm Capacity up to 500 m3/h New main filter cartridge The Agfa / Absolent filter is one of the most efficient oil mist and oil fume filters in the world. It has very low maintenance requirements and can operate for several years without filter replacement, resulting in very low operating costs. Iiedpfx Anezva Tme Nsf Due to its design and large filter surface area, it offers both a long service life and consistently high separation efficiency. Thanks to its design, the filter can operate continuously and without interruption. The liquid collects at the bottom of the filter and can be reused.

Condition: excellent (used), Year of construction: 2025, operating hours: 500 h, Eggersmann “Teuton Z 50” Mobile Single-Shaft Shredder Year of manufacture: 2025 Operating hours: 500–1000 Extended warranty available Engine: Diesel, 6-cylinder Output HP/kW: 500/373 Shredding shaft length x diameter Ø: 3,000 mm x 1,050 mm Rotor speed (rpm): 20–40 Bolted tools Tool-free cutting gap adjustment in six steps Extra-large feed area, 5 m wide Rear discharge conveyor Iisdpfx Ansxqxbxo Nef Reversing rotor Operating position: Length (mm): 15,864 Width (mm): 2,540 Loading edge (mm): 3,000 Discharge height (mm): 5,000 Transport dimensions Length (mm): 8,976 Width (mm): 2,540 Height (mm): 3,652 Weight (kg): 25,000 VARIOUS OPTIONS AVAILABLE ON REQUEST Screen basket systems: Strip and honeycomb screen baskets in various versions Rotor tools: Multigrip – Unigrip – Twincut – Rootgrip Overbelt magnet: Extra-strong neodymium version, hydraulically height-adjustable, material discharge on both sides possible Ecospray moisture system and much more…

Condition: good (used), Year of construction: 1980, Info: The machine was installed in a pit! - Pulling force: max. 25,000 kg - Stroke height: max. 630 mm - Working speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total power requirement: 45 kW - Machine weight: 5,500 kg Transport and loading can be organised across Europe upon request and for an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Machinery Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS & MORE. Are you looking for a high-quality yet affordable machine for your production? Or would you like to sell yours? Iijdezvfpmopfx An Nsf For further information or contact options, you can reach us via the contact form.

Condition: good (used), Year of construction: 1999, functionality: fully functional, cutting length (max.): 6,250 mm, feed length X-axis: 6,250 mm, saw blade diameter: 500 mm, total length: 7,000 mm, total width: 1,100 mm, saw blade speed: 2,820 rpm, input voltage: 400 V, overall weight: 1,910 kg, For sale is an Emmegi Twin Electra Sun double miter saw in good, functional condition. The machine is ideal for the precise processing of aluminum, plastic, and similar profiles. Thanks to the programmable control system and numerous stored programs, it is well-suited for both individual custom pieces and series production. Technical data: * Manufacturer: Emmegi * Model: Twin Electra Sun * Year of manufacture: 1999 Ijdpfx Anjztkbvj Njif * Cutting length range: 350 to 6,250 mm * Double miter saw with automatic positioning * Various programs can be stored or are already available * Suitable for precise 90° and miter cuts The machine is in a ready-to-use condition and can be inspected and tested by appointment. Price: Negotiable

Condition: excellent (used), Double bench grinder Iodpjk Iwx Eefx An Njif