Used Dovetailers for sale (173)

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. Gjdjyx Uy Aspfx Aihsuh • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: used, Year of construction: 1999, functionality: fully functional, Schmidler S4 Joinery Line - 4-strand transverse infeed conveyor (inclined upwards) - Infeed roller conveyor - Edge turning device integrated in the infeed roller conveyor - Zero point detection - Electronically controlled under-table swing cross-cut saw Saw blade diameter: 710 mm Swivel angle: 360 degrees Tilt angle: 0–65 degrees - Waste wood pusher - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger-joint cutter and dovetail milling head - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit - Vertical profiling mill (lower position) for internal radii - Powered outfeed roller conveyor - Pneumatic push-off ruler - Transport and measuring system - Control system incl. color display Guodpfxjya Dc Is Aihjh Maximum workpiece dimensions: Height: 300 mm Width: 400 mm Length: approx. 12,000 mm 4-Side Planer – Schmidler Minimum workpiece dimensions: Height: 30 mm Width: 50 mm Feed speed: 9/18 m Planer shaft diameter = 140 mm 4-sided chamfering unit Infeed roller conveyor Outfeed roller conveyor with push-off ruler and storage rods Machine in good used condition, fully operational and in use. The machine can be inspected by appointment. Available for sale immediately or by arrangement.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x750x1250 mm Weight 600 kg Gujdpfx Aisv A Hyqjheh Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2020x920x1160 mm Weight 680 kg Gusdev A Hywopfx Aiheh Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2020x920x1160 mm Gsdpfov A Hy Dex Aihjuh Weight 750 kg Total power requirement 3,2 kw

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, Equipment: CE marking, TECHNICAL SPECIFICATIONS Maximum mounting hole dimensions: 3500 x 2500 mm Minimum mounting hole dimensions: 250 x 350 mm Vertical cylinders: 2 pcs, ø 65/40 mm, stroke 1300 mm Total lifting capacity of vertical cylinders: 7.4 tons Horizontal cylinders: 2 pcs, ø 50/30 mm, stroke 1500 mm Total lifting capacity of horizontal cylinders: 2 tons Hydraulic unit 1.5 kW *The maximum size of the workpiece will be smaller than the maximum operating range of the press, depending on the type of joint (dovetail or pin) and the method of positioning the workpiece in the machine (pre-assembled or unassembled). PRESS DESCRIPTION • 3 positions for the lower beam • Pressure is adjusted directly from the hydraulic unit using a knob; the current pressure is displayed on an indicator during operation. • All electrical components are manufactured in accordance with European standards; each component has a code corresponding to the marking on the electrical diagram. • Hydraulic unit with a pump in an oil bath for better noise reduction and lubrication. A 1.5 kW motor is installed on the oil tank. • The rack and pinion system allows for precise movement of the upper beam. • The supporting structure is made of welded iron elements, Fe 430 grade. • Control panel: - Button for vertical movement of the beam - Button for vertical clamping - Button for opening the horizontal clamping corners - Button for horizontal clamping of the corners Gusdsznv A Uopfx Aihjh - Additional button for two-handed activation of the press functions Warranty: 12 months on spare parts

Condition: good (used), Year of construction: 2001, functionality: fully functional, FMB MBZ 75 - 80, 5-axis FMB multi-machining center, Guodpfxezhuito Aiheh Type MBZ - 2 / 72-80 / 5, Year of manufacture 2001, PC control with TFT color display, Travel range X/Y/Z 7000/1000/370 mm, Milling head with high-frequency spindle for aluminum, Spindle speed up to 18,000 rpm - 7.5 KW, Tool changer, 12-position, Tool holder HSK 40, 2-axis NC dovetail milling head, 8 pneumatic clamping elements, Swivel machining possible, Program generator, FMB programming software, Pneumatic material stop, Measuring / probing device.

Condition: used, Workbench vice, parallel vice LEINEN with dovetail guide and height adjustment. Model: 125. Jaw width: 125 mm. Jaw height: 23 mm. Clamping range: max. 200 mm. Overall height: 550 to 750 mm. - 360° rotatable. - Dovetail guide. - Anvil surface for light straightening work. - Approx. 200 mm height adjustment without lift system. Weight: 44.5 kg. Good condition. Gjdpfxoy E T Dyo Aiheuh

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, overall weight: 300 kg, Cross Slide – Support Type PS 35 Support suitable for hand-operated bending machines with a 350 mm center height Guodpfexp Sfhox Aihoh Technical Data Longitudinal slide travel: 360 mm Cross slide travel: 150 mm Height: 325 mm Rotary table diameter: 215 mm Shear length: 550 mm Weight approx.: 300 kg Machine Description - Technically inspected and ready for operation - Robust cast iron construction - Adjustable dovetail guides - Trapezoidal spindle for longitudinal and cross slide - Large dimensioned handwheels

Condition: used, functionality: fully functional, Metering and application system Hydrotop 1 E400R + Ecotac_C Guodpfxoul Shnj Aiheh for single-component (1K) PUR edge gluing for package dovetail joint systems Glue application – dovetail joint Adhesive application – dovetail joint in very good condition functionality tested

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Throat 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount MK 4 Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Weight approx. Gedpfjvutw Hox Aiheuh 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Simple and quick speed change using a gear lever Pivoting milling head for angle drilling, milling bevels, etc. Location: from stock 54634 Bitburg - available at short notice -

Condition: excellent (used), Lista drawer cabinet with milling tools Lista drawer cabinet Number of drawers: 13 Drawer type: Full extension Very high load-bearing capacity due to the precise and stable construction made of high-quality, welded sheet steel Body color: Reseda green, RAL 6011 Load capacity per drawer: 200 kg External dimensions W x D x H: 720 x 710 x 1000 mm Gsdpfxjq Aa I Tj Aihjuh Contents: Metal circular saw blades Disc milling cutters, cross-toothed & coupled Disc milling cutters, cross-toothed Angle half-round milling cutters Dovetail milling cutters Half-round milling cutters Thread milling cutters More items - new and used - can be found in our shop! International shipping costs available upon request!

Condition: repair required (used), functionality: unexamined, Dovetail slotting machine for wood packages dimter HK 400 Dovetail slotting machine Input lengths: 800–6000 mm Cutting height: 285 mm, optionally 300 mm Color: Blue Consisting of: Pos. 01 Packaging unit Pos. 02 Package roller conveyor Pos. 03 Central milling cutter Gujdpfx Aiovi Hw Njheh Pos. 04 Package roller conveyor Pos. 05 Package singulation unit Pos. 06 Chain cross conveyor Pos. 07 Infeed roller conveyor Pos. 08 Cycle press Pos. 09 Feed unit Pos. 10 Cut-off saw Including control cabinets and operator panels The machine requires repairs and is sold in its current condition. It has already been dismantled and is stored in Achern. All technical documentation is available. We are available at any time to answer questions about the machine and provide technical information. We will provide consulting support for repair and reassembly.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Small tenoning machine with manual feed, Stomana. The machine has undergone a complete overhaul. The electrical system is new. Warranty on the machine. Suitable for standard tenoning as well as micro-dovetail joints. Gedpfx Asyzb Apoiheuh

Condition: used, Year of construction: 2006, Timber processing machine Manufacturer: Hundegger Type: K2-4-450 Year of manufacture: 2006 Technical data - Maximum timber length for feeding: 13 m Gusdpfjzzcx Asx Aiheh - Maximum timber length for stacking: 12 m - Color: RAL 5012 blue - Infeed cross conveyor, 5 strands, horizontal, 2.2 m with flat belt chain - Infeed strand with shaft extension - Extension support with infeed device - Undercarriage swivel miter saw - Universal milling machine, 4-axis, UF4 - Roller cutter - Finger cutter - Dovetail cutter - Combination support for vertically operating tools - Drilling unit, 2.2 kW - Drilling unit, 3.0 kW, reinforced - Combination support for horizontally operating tools - Drilling unit, 2.2 kW - Slotting unit - Marking unit - Stacking table, 6-arm - Fully automatic beam turning station, pneumatic - Refined timber support surfaces - Label printer Note: The technical data and descriptions are a verbatim transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: new, Year of construction: 2026, CORMAK ZX 7055 VARIO Milling and Drilling Machine Main Advantages Rigid cast iron base and column – ensures stability when machining demanding workpieces, reduces vibration, and extends tool life. Variable spindle speed control in two ranges: 75–438 rpm (low range) and 438–2500 rpm (high range) – allows optimal parameter selection according to tool diameter and material type. Automatic spindle feed – provides consistent cutting performance and reduces the risk of drill breakage during deep-hole drilling. Tapping function – once the preset thread depth is reached, the spindle automatically switches to reverse rotation. Ground gears – ensure smooth and quiet gearbox operation with stable spindle torque. Dovetail guideways on all axes – provide precise table movement and reliable machine geometry. Swiveling head ±90° with height adjustment – facilitates chamfering, undercutting, and angular machining operations. Forward and reverse spindle rotation – enables safe tapping and tool withdrawal. Efficient cooling system – effectively dissipates heat during machining, prevents overheating of both the tool and workpiece, and improves machining accuracy and tool life. Standard Equipment Variable spindle speed control Electrically powered spindle head height adjustment Coolant system Technical Description Heavy-Duty Cast Iron Construction The robust cast iron construction forms the foundation of the machine’s durability and precision. The ZX 7055V DRO milling and drilling machine maintains excellent stability even during the most demanding operations. The machine features continuously variable spindle speed adjustment in two ranges: Low range: 75–438 rpm High range: 438–2500 rpm Large Cross Table with Precision-Ground Surface Attention to detail is a key design feature. The large cross table with a precision-ground surface ensures excellent flatness, resulting in highly accurate machining. Dovetail Guideways Innovative dovetail guideways provide smooth and precise movement along all three axes, enabling outstanding machining results without compromise. Forward and Reverse Rotation Adapt the machine to your requirements. The ability to rotate the spindle in both directions provides additional flexibility during machining operations. Swiveling Head ±90° and Adjustable Head Height Guedpfx Aozd R Eisihsh Handle a wide variety of machining tasks thanks to the ±90° swiveling head and adjustable head height. Achieve precise results under all working conditions. Optional Machine Base A machine stand/base is available as an optional accessory. Technical Specifications Parameter Value Maximum Drilling Capacity Cast Iron (HT200) 45 mm Steel 32 mm Maximum Face Milling Capacity 80 mm Maximum End Milling Capacity 28 mm Table Size 820 × 240 mm Table Travel (X/Y) 595 / 185 mm Maximum Tapping Capacity M24 Spindle Taper MT4 Spindle Speed Range Low Range 75–438 rpm High Range 438–2500 rpm Spindle Travel Manual 107 mm Automatic 100 mm Distance from Spindle to Column Surface 250 mm Maximum Distance from Spindle Nose to Table Surface 445 mm Motor Power S1/S6 1.5 / 1.8 kW Net Weight 350 kg Overall Dimensions (L × W × H) 1084 × 924 × 1550 mm Height with Base 2150 mm

Condition: used, Year of construction: 1997, - Feeding and transport - Milling machine combination with glue application - Transfer station - Infeed station - End face press with stacking Dovetail tenon machine Manufacturer: Grecon Year of manufacture: 1997 Space requirements for operation and maintenance Length 18500 mm Width 6500 mm Height 2000 mm Weight and floor load Total weight 10500 Kg Floor load dyn. 25 N/cm² Wood data Wood type: Softwood or hardwood Length (min/max) 150 / 2000 mm Width (min/max) 50 / 205 mm Height (min/max) 35 / 50 mm Output length (min/max) 3000 / 6000 mm Guodpfxezuyw As Aihjh Machine components Feeding and transport Conveyor belt Type: FB 600 / 1000 Powered conveyor belt with fixed and foldable side guides and a retractable stop for aligning the packages. Technical data Length 1100 mm Width 950 mm Height 1000 mm Power consumption 1.1 kW Feed speed 75 m/min Milling machine Turbo milling combination Type: FDL-F-205/600/500 Two combined milling machines in a heavy-duty design with adjustable tables as workpiece supports, guided by a stable combined ball bearing and roller guide. Each milling machine is equipped with a clamping station, the trimming unit, and the milling unit. Either the second milling machine or both milling machines are equipped with a glue application system. The milling machines can be equipped with a scoring saw. Belts between the milling machines minimize package transport times, thus achieving a fast throughput. A pneumatic vibrating device in the clamping station ensures even alignment of the wood. Horizontal and vertical pressure devices clamp the package. The trimming unit is used to cut a reference edge on the workpiece. This reference edge determines the length of the respective dovetail tenon profile and can be adjusted. The dovetailing is carried out by the milling unit, followed by glue application via a side jet or roller applicator. Technical data Power consumption 63 kW Compressed air consumption 350 NL/min Exhaust diameter 2 x 250 mm Exhaust volume 10600 m³/h Drive Motor 1: Table feed, milling table Manufacturer: SEW Power consumption 1.5 kW Speed 71 rpm Motor 2: Belt drive Manufacturer: SEW Power consumption 1.1 kW Speed 227 rpm Motor 3: Trimming unit motor Manufacturer: Walter Power consumption 5.5 kW Speed 2880 rpm Motor 4: Milling spindle motor Manufacturer: Behnke Power consumption 22.0 kW Speed 3000 rpm Transfer Transfer station Type: ÜL WB 600/1000 Transfer station designed in a robust welded construction with an infeed belt, alignment stop, cross-feed unit, turning device with turning brush, and an outfeed belt, as well as adjustment devices for optimal adaptation to different wood dimensions. The packages of workpieces, which have been milled, are transferred from the milling table of the dovetail tenon milling machine to the conveyor belt of the transfer station and aligned flush with a stop. The aligned wood package is moved transversely to the infeed direction into the area of the turning device by the cross-feed unit. The separation of the wood package is carried out either directly onto the outfeed belt or by turning it 90 degrees and aligning it with a fixed edge. The discharge edge can be adjusted to the wood dimension. The separated wood is transported to the infeed station via a fast-moving conveyor belt. Technical data Power consumption 2.5 kW Compressed air volume 12 m³/h Feed speed 75 m/min Infeed station Infeed station Type: EKK 205 Infeed station with a side chain guide for transporting the separated pieces of wood.

Condition: new, Year of construction: 2026, The CORMAK ZX 7055 VARIO DRO milling and drilling machine is a high-performance universal machine designed for drilling, milling, and tapping operations in steel and cast iron. Its robust cast-iron construction, continuously variable spindle speed control in two ranges, and digital position readout system ensure high accuracy and repeatability in single-piece and small-batch production. Main Advantages of the Machine Rigid cast-iron base and column – provide excellent stability during machining of demanding workpieces, reduce vibrations, and extend tool life. Continuously variable spindle speed control in two ranges: Low range: 75–438 rpm High range: 438–2500 rpm Allows optimal selection of cutting parameters depending on tool diameter and material. 2-axis digital readout system (DRO) – enables fast and accurate positioning while reducing setup time and eliminating reading errors from manual scales. Automatic spindle feed – ensures smooth cutting performance and reduces the risk of drill breakage during deep drilling operations. Thread cutting function – after reaching the preset tapping depth, the spindle automatically reverses direction. Ground gears – provide quiet transmission operation and stable spindle torque. Dovetail slideways on machine axes – ensure precise table movement and accurate geometry. Rotating head ±90° with height adjustment – allows easy execution of angled machining operations, chamfers, and undercuts. Left/right spindle rotation – enables safe tapping and tool withdrawal. Efficient cooling system – effectively removes heat from the cutting zone, prevents overheating of tools and material, improves machining accuracy, and extends cutting tool life. The core of the machine is a heavy cast-iron structure with wide guideways, minimizing deflection during face and end milling operations. The large cross table provides a spacious working area and features a precisely ground surface to ensure accurate workpiece positioning. The spindle with an MK4 taper is driven by an S1/S6 1.5/1.8 kW motor with variable speed control. The integrated cooling system stabilizes the cutting temperature and improves the quality of machined surfaces. The combination of a 2-axis DRO system, ground gears, and rigid guideways provides excellent dimensional repeatability and high surface finish quality. The automatic spindle feed and two-speed spindle range allow optimal machining parameters for: drilling in steel up to Ø32 mm, drilling in cast iron up to Ø45 mm, face milling up to Ø80 mm, end milling up to Ø28 mm. Standard Equipment Variable spindle speed control 2-axis digital readout system (DRO) Ø80 mm milling cutter head with inserts Drill chuck Cooling system Gujdpfeyapyrjx Aihjh Technical Specifications Parameter Value Maximum drilling capacity – cast iron (HT200) 45 mm Maximum drilling capacity – steel 32 mm Maximum face milling diameter 80 mm Maximum end milling diameter 28 mm Working table dimensions 820 × 240 mm Table travel (X/Y) 595 / 185 mm Maximum tapping capacity M24 Spindle taper MK4 Motor power (S1/S6) 1.5 / 1.8 kW Low spindle speed range 75–438 rpm High spindle speed range 438–2500 rpm Spindle travel – manual 107 mm Spindle travel – automatic 100 mm Distance spindle axis to column surface 250 mm Maximum distance spindle nose to work table 445 mm Net weight 350 kg Overall dimensions 1084 × 924 × 1550 mm Height with base 2150 mm

Condition: used, Counter bearing and adapter for milling machine for horizontal milling Counter bearing and adapter (counterholder) for DECKEL milling machine (Bearing block with dovetail mounting adapter DECKEL FP1 + FP2) Type 9570 Dovetail width, narrow: approx. 72 mm Dovetail width, wide: approx. 88 mm Dovetail height: approx. 15 mm Length (bearing block): 133 mm Width (bearing block): 50 mm Gjdoxcbl Depfx Aihjuh Total height (bearing block): 105 mm Bearing bore: Ø 17 mm (with bronze bearing bushing) Distance from bore axis to dovetail mounting face: approx. 82.5 mm (center height) - Adapter fits dovetail and mounting surface, raises center height by 22.5 mm to 105 mm Total length (dovetail rail): 635 mm Weight: 3.8 kg Very good condition

Condition: refurbished (used), DKV III continuous press with braking unit Completely overhauled Optional with original hydraulic motors or with servo motors Options: - Chain threading - Co-rotating cut-off saw Function: For pressing the dovetail joint without stopping (in a continuous process). The upper and lower plate chains generate the feed force. Downstream braking plates transmit the required longitudinal pressing force to the wood through friction. Advantages: - High performance despite a relatively slow feed rate - Absolutely no vertical displacement of the dovetail joints Technology: Heavy-duty plate chain 2", pneumatically adjustable Braking elements are floating Press force measurement via contact manometer Height adjustment electrically Maximum press force adjustable and dependent on feed rate and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed rate adjustable 10-70 m/min Drive power Adjustment of infeed unit 1 kW Adjustment of brake 1 kW Gedpfxev T Aqyo Aihouh Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Ratio thickness - width 6 : 10 Wood cross-section with 15/16.5 mm tenon max. 90 cm²

Condition: new, functionality: fully functional, feed length X-axis: 590 mm, feed length Y-axis: 180 mm, feed length Z-axis: 320 mm, Powerful universal milling machine UWF 80 E designed for professional craftsmen and specialists. Equipped with two spindles – horizontal and vertical. Large clamping table surface of 1000 x 240 mm, additionally tiltable within a range of +/-45°. Automatic feed for X and Y axes. Swiveling head +/-90°. 3-axis digital display. Schneider Electric electrical system. ISO 40 taper. Features: - Capability for both vertical and horizontal milling – extends the application range - Milling table tiltable by 45° to the right and left Guedpeytfcvsfx Aiheh - Quiet operation with ball bearings ensures excellent concentricity - Easy spindle speed adjustment - Swiveling milling head from -90° to +90° - Large clamping table area: 1000 x 240 mm - Automatic feed for X and Y axes, including rapid traverse for X axis - Milling: spindle feed set via handwheel - Drilling: spindle feed set via feed lever - Quick-switching clutch between automatic and manual spindle feed - Right and left spindle rotation for thread cutting - Dovetail guides - Precision cross table with T-slots - 3-axis digital display included Technical specifications: - Table size (width): 1000 mm - Table size (depth): 240 mm - Spindle taper: ISO 40 - Spindle speed min: 115 rpm - Spindle speed max: 1750 rpm - Horizontal spindle speed min: 60 rpm - Horizontal spindle speed max: 1350 rpm - Speed change – number of steps/stepless: vertical – 8, horizontal – 9 - Quill stroke: 125 mm - Travel in X axis: 590 mm - Travel in Y axis: 180 mm - Travel in Z axis: 320 mm - Spindle to table distance: 0 – 375 mm - Spindle to column min. distance: 230 mm - Spindle to column max. distance: 685 mm - Table swivel: -45° to +45° - Milling head tilt: -90° to +90° - Automatic feed X axis: (8) 32 – 700 mm/min - Automatic feed Y axis: stepless mm/min - Number/size/spacing of T-slots: 16 mm - Motor power: 1.5 kW - Motor power S1 100%: 0.85 kW - Second spindle motor power: 1.5 kW - Dimensions (width): 1500 mm - Dimensions (depth): 1430 mm - Dimensions (height): 2100 mm - Weight approx.: 980 kg Scope of delivery: - 3-axis digital display ES 12H - M16 drawbar - LED lighting - Coolant system - Automatic table feed for X axis - Automatic table feed for Y axis - Reducing sleeve ISO 40 / MT3 - Reducing sleeve ISO 40 / MT2 - Reducing sleeve ISO 40 / B18 - Long milling arbor 27 mm - Horizontal support - Legally required safety covers - Full technical documentation (DTR) in Polish - CE certificate - 24-month warranty for all components at no extra charge

Condition: new, Year of construction: 2026, ZX7045 B1L milling and drilling machine is a versatile drill-mill designed for precision metal machining in workshop and production environments. The machine combines drilling and milling functions, ensuring stable operation thanks to its heavy cast-iron construction and a wide spindle speed range. It is a solution for facilities that require repeatability, rigidity, and real productivity. Main advantages Heavy, stable cast-iron body – minimizes vibrations during milling and drilling Automatic spindle feed (125 mm) – improves efficiency in batch operations Height adjustment on the support, not the column – greater setup precision 12 spindle speed ranges up to 3200 rpm – adaptable to material and tooling Equipped with coolant system – stable cutting conditions and extended tool life Dovetail guideways – high rigidity and movement accuracy Guodpfxey E Hk Hj Aiheh Tilting head ±90° – enables angled machining Quiet operation thanks to ground gears and capability of both left- and right-hand rotation Construction and technology The ZX7045 B1L drill-mill is designed as a compact yet fully industrial metal milling machine. Its heavy base and cast-iron body ensure high system rigidity. The cross table (1000 × 240 mm) features a precision-ground working surface, allowing accurate workpiece clamping. The MT4 spindle taper enables the use of a wide range of tools, including end mills, face milling heads, and taper shank drills. The 1.8 kW (2.5 HP) motor, powered at 400 V, ensures stable performance even at larger milling diameters. Precision and performance With X/Y/Z travels of 560 / 190 / 430 mm, the machine supports a wide range of operations: drilling up to 32 mm in steel and 45 mm in cast iron, face milling up to 80 mm, and end milling up to 28 mm. Adjustable quill feed rates (0.12; 0.18; 0.25 mm/rev) allow parameters to be tailored to the material and quality requirements. Standard equipment Drill chuck arbor MT4/B18 Drill chuck 3–16 mm / B18 Reduction sleeve MT4/MK3 Reduction sleeve MK3/MK2 Basic tools User manual (Polish) Optional equipment Machine stand Automatic X-axis feed Swivel, tilting, and precision vises Rotary tables and dividing heads Tapping heads and milling heads Tool holders and drive arbors Technical specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 45 mm Face mill diameter: 80 mm End mill diameter: 28 mm Spindle speeds: 95, 170, 190, 280, 340, 540, 570, 960, 1100, 1600, 1950, 3200 rpm (12 steps) Spindle taper: MT4 Spindle feed: 125 mm (automatic) Table size: 1000 × 240 mm Base dimensions: 440 × 600 mm Max. spindle-to-table distance: 445 mm Spindle-to-column distance: 262.5 mm X/Y/Z travel: 560 / 190 / 430 mm Quill feed rates: 0.12; 0.18; 0.25 mm/rev Head tilt (left/right): 90° Motor power: 1.8 kW (2.5 HP) Power supply: 400 V Weight: 375 kg

Condition: new, functionality: fully functional, grinding length: 304 mm, grinding width: 152 mm, Surface Grinder MSG 1530 BERNARDO Compact surface grinder: longitudinal, cross, and vertical feeds are all completely manual. Low-vibration spindle operation thanks to the use of high-quality special bearings. Indispensable for machining smaller parts and in fast grinding processes. Longitudinal table movement via a combination of V-guide and flat guide; cross table travel and vertical wheel feed are handled by dovetail guides. Central manual lubrication for all guides. All main components, such as the column, base, and slideways, are made from high-quality cast iron. Technical Specifications Table clamping surface width: 304 mm Table clamping surface depth: 152 mm Longitudinal travel (X): 340 mm Cross travel (Y): 170 mm Max. spindle axis to table distance: 210 mm Max. table load: 30 kg Grinding wheel size: 180 x 13 x 31.75 mm Grinding spindle speed: 2800 rpm Grinding spindle motor power: 0.55 kW Voltage: 230 V Dimensions (width): 1100 mm Dimensions (depth): 760 mm Guedpsyt Hycofx Aihoh Dimensions (height): 880 mm Weight approx.: 210 kg Cross feed (Y) Manual cross feed: 2.54 mm/rev. Handwheel graduation (Y): 0.02 mm Vertical feed (Z) Manual vertical feed: 1.25 mm/rev. Handwheel graduation (Z): 0.025 mm Scope of delivery Basic tools Permanent magnetic chuck Grinding wheel flange Grinding wheel Legally required safety guards Complete DTR (technical documentation) in Polish CE certificate 24-month warranty for all, at no extra charge

Condition: new, Year of construction: 2026, The XZ7550ZB milling and drilling machine is the perfect tool for professionals. With a simple, uncomplicated design, this machine guarantees uninterrupted work for a long period of time. With a vertical head and horizontal spindle, the XZ7550ZB offers a wide range of machining options. The ISO 40 tool clamping cone ensures robust tool clamping, while the spindle auto-feed further increases productivity and efficiency. X- and Y-axis working feeds and fast Z-axis positioning feeds enable precise machining, while the extendable vertical head spindle facilitates access to workpieces. Mechanical feed in 3 ranges and an automatic threading option add flexibility. The vertical head swivelling from 0-90° and the upper extension and swivelling bar add extra functionality and precision. Machine description AUTOMATIC ELECTRIC FEED OF THE TABLE IN THE Y AXIS AUTOMATIC MECHANICAL FEED OF THE TABLE IN THE X AXIS AUTOMATIC SPINDLE FEED HEAVY, STABLE CAST IRON CASTING VERY PRECISELY MANUFACTURED SOLID CROSS TABLE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES IN ALL 3 AXES QUIET RUNNING THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION SWIVEL HEAD +/- 90° Gujdpfoud Ic Djx Aihsh Technical data Max. drilling diameter 50 mm Max. horizontal milling length 100 mm Max. vertical milling diameter 25 mm Max. threading diameter M16 Max. boring diameter 120 mm Spindle taper ISO 40 50Hz spindle speed range and number (rpm) 72-1800 (8) Vertical, 60-1350 Horizontal (9) Distance between spindle and column surface 200-700 mm Distance between spindle and table 100-480 mm Distance between spindle axis and table 0-380 mm Number, width and spacing of T-slots 5 / 14 mm/44 mm Spindle travel 120 mm Table size 1000x240 mm Table travel 600x230 mm Feed of table 24-720 mm/min (8 speeds) Spindle feed 0.015; 0.08; 0.25 mm/rev. Motor (vertical/horizontal) 1.5 kW/1.5 kW Overall dimensions 1120x1060x2035 mm Weight 970 kg Scope of delivery Digital readout for 3 axes SINO ISO 40 Morse bushings Drill chuck B16 CE declaration of conformity Machine vice L - 160 mm Milling machine spindle with a set of collets for finger joint cutters Horizontal spindle support / ocular / Milling arbor long. Basic tools 24 V halogen lighting system Cooling system

Condition: good (used), total height: 2,500 mm, total length: 5,300 mm, total width: 2,500 mm, feed length X-axis: 1,550 mm, feed length Y-axis: 600 mm, grinding height: 800 mm, overall weight: 7,800 kg, GER RS 15/60 grinding machine Table 1500 x 600 mm X-axis travel 1550 mm Y-axis travel 600 mm Maximum grinding height 800 mm Wheel size 400 x 100 mm Automatic infeed Yes Guodpfx Aisvli H Sshoh Dovetail accessory Yes Cooling system Yes Machine dimensions (width x length x height) 2500 x 5300 x 2500 Weight 7800 kg