Used Dowel Drill for sale (5,030)

Condition: excellent (used), KOCH Dowel Inserting Machine Type DL-80 Machine No.: A0005/6390 Workpiece Dimensions: Workpiece length: 180 - 2500 mm Workpiece width: 70 - 800 mm Workpiece thickness: 12 - 40 mm - with glue application and dowel insertion station - with 1:1 glue pump - 1 vibratory feeder with control mirror per side Isdpfx Agsx Ez A Rjzoik - lateral dowel hole air nozzles - mechanical digital display for height adjustment - PLC control - machine bed with linear guides 1 x NC axis for positioning Configuration of glue application and dowel insertion station: 6 single dowel tools per side Dowel diameter: 8 mm Dowel length: 35 mm Dowel projection: 7-14 mm Pitch: 32 mm Minimum dowel center distance: 32 mm; maximum: 736 mm Tolerances for wooden dowels: Dowel length: +/- 1 mm Dowel diameter: +0.1 / -0.2 mm Electronic Glue Monitoring ELC The monitoring device is installed before the glue valve. With every working cycle (glue shot), the glue flow is measured. If no glue is dispensed from an activated glue valve, the machine interrupts its cycle and indicates the relevant glue valve on the control cabinet. 12 x Electronic Glue Monitoring ELC, one per glue valve Flip-up belt extension Workpiece alignment station in belt infeed for minimum workpiece width of 70 mm, plus alignment for narrow parts Electrical connection rating: 400 V, 50 Hz, 3 phase Voltage fluctuation: max. +6 to -10% Air connection: 7 bar Extraction air speed: approx. 30 m/sec Ambient temperature at installation site: min. 10° C (50° F), max. 40° C (100° F)

Condition: used, Year of construction: 2010, operating hours: 2,635 h, 2010 | Atlas Copco Boomer XE3C with COP 1838, very good condition, one defect (EPIROC) | Used Drill | 2635 hours 📍Location: Switzerland, Weite Iedpfxoxzhf Ij Agzjik 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 98000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 49 inspection points 46 approved ✅ 2 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Honest machine from two-tier system, three drilling arms, an additional tamping platform - no maintenance backlog, drive axle "with one blow" broken, no decomposition of the tooth flanks, rather shaft fracture suspected, no external bursting of the differential housing or the axle journals, casting in order. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39154 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2023, condition: new, machine/vehicle number: 801694948, Boring rod + hydraulic hammer 8x 76mm DTH drill pipe , 4000mm x 63mm, 2 3-8\" API Reg 1x 3,5\" DTH Hammer with \" shank with 2 3-8\" API More Information Ijdpfx Agohypv Rozsik Intended use: construction,

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee Iiedov Trlmjpfx Agzjk

Condition: excellent (used), For sale: Complete Waldmann & Weigl ER-220 electrical discharge machine, designed for precise removal of broken drills, taps, and cutting tools. Professional workshop solution from Germany, ideal for toolrooms, service shops, and mechanical workshops. • Manufacturer: Waldmann & Weigl GmbH, Germany • Model: ER-220 • Power supply: 220 V / 50 Hz • Working current: 1.5 A • Electrode range: from Ø1.0 mm to Ø10 mm (copper, tubular) • 6-stage erosion voltage adjustment (from gentle to intensive burning) • Electrode holder with height adjustment • Cooling pump with water tank • Control panel with operating mode selection • Complete documentation in German (original manual) • All components mounted on a mobile workshop table with castors. The machine is fully operational, complete, and ready for use. Indispensable for fast and safe removal of broken tools from workpieces without risk of damaging the component. Iijdpfxsw Syyys Agzjk

Condition: good (used), functionality: fully functional, Data --- Drilling capacity 40 mm / St. 60 --- Tapping capacity M 33 mm / steel --- Mounting MK 4 --- 18 speeds 35 - 1,800 rpm --- Iiedpex Hhf Ijfx Agzjk 5 feeds 0.075 / 0.15 / 0.3 / 0.45 / 0.6 mm/rev --- ----

Condition: used, Year of construction: 1987, Technical details: grinding diameter max.: 40 mm workpiece length: 700 mm table adjustment: 0-50 mm table adjustment: abrichten=25 mm cross table: quer/transversal=80 mm number of spindle speeds: 3000 U/min total power requirement: 3,3 kW weight of the machine ca.: 0,8 t space requirements of the machine approx.: T:1,5xB:1,5xH:1,5 m Application area for types of grinding such as: - 3 facet cut; cross cut, 3 edged drill countersinks; spiral drill right spin Iedpfx Aou Ng Hnegzjik - grinding area for drills Ø 5 - 40 mm , right spin (5-40mm possible, but chuck to clamp 3-15mm only available and installed on machine!) - max. grindable drill length approx. 700mm with a tip angle of 140 degrees - cutting speed of grinding wheel 25m / second - central lubrification - central coolant device The machine is including accessories see pictures! *

Condition: new, Year of construction: 2025, functionality: fully functional, Gannomat Selekta dowel driving device Year of manufacture 2025 Dowel driving machine with gun for simultaneous gluing and dowel driving. For professional and efficient processing of dowels in furniture and frame construction. • Constant dowel driving protrusion • Always constant and correct amount of glue • Due to the correct amount of glue, no subsequent cleaning of the workpieces is necessary • Easy cleaning of the glue system via EasyClean, the automatic cleaning program • Automatic ejection of dowels with the wrong diameter and length thanks to Auto-DL-Selekt • Dowels are not driven into the bottom, the dowel driving protrusion is set independently of the drill hole depth • Recoil-free, extra-light and comfortable glue-dowel-driving gun • Great time saving compared to glue bottle and hammer Iiodpfxjvxgm No Agzjk

Year of construction: 2023, condition: new, machine/vehicle number: 383036928, 16x 120mm DTH drill pipe , 4000 mm x 85 mm , 2 7-8\" API Reg 02x Adapter shank 2 3-8\" API Reg Pin x 2 7-8\" API Reg Box 02x 140mm DTH drill bit 02x 5\" DTH Hydraulic breaker with DHD350 shank, 2 7-8\" API Iedpfx Agjhypv Uozoik More information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: new, Year of construction: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traversing speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth 0–35 mm (with drill length TL 70 mm), automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER to flush glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Indicator lamp for residual glue level in glue container - 1 pc. left side stop, 1 pc. right side stop (all removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT controller with: Integrated industrial PC, incl. Beckhoff TwinCAT soft PLC, operating temperature range 0–50°C, 15" capacitive touchscreen TFT industrial display, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 2 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, plain text error diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, art. no. 0470-0810 - 1 EASY CLEAN system, for automatic test glue shots before starting the drilling/gluing/dowel insertion program. E.C.S. for 1 pc. glue nozzle, art. no. 0471-Z010 - 1 single-spindle vertical drilling unit from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjusted via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) Art. No. 0471-0830 Isdpfx Agew Sgm Hezsik - 4 vertical angled clamping cylinders 10° with mount, additional, Art. no. 0470-0850 Available: short notice

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Features and Technical Data: Iiodpfxjxymfds Agzok - Designed for all window tool systems up to 400 mm tool diameter - Thanks to the standard braking devices (foot brake for slot spindle, automatic electronic safety brake for saw), the machine can be stopped within a few seconds - The protective hoods for the slot spindle and cross-cut saw are designed so that tools can be easily and conveniently changed without having to remove the hoods themselves - The cross-cut saw can be conveniently adjusted from the operator’s position using a quick adjustment. A six-position turret allows for fast changeover to different dimensions - The 40 mm slot spindle can be precisely adjusted in height via a conveniently positioned handwheel with 0.1 mm graduations - The stable roller table, in combination with hardened and ground guides, can be moved easily with minimal effort - Slot spindle motor: 5.5 kW - Slot spindle speeds: 3000/4500 rpm - Spindle diameter: 40 mm - Clamping length: 140 mm - Slot spindle height adjustment: 100 mm - Extraction nozzle: 120 mm - Cross-cut saw motor: 2.2 kW - Cross-cut saw speed: 2950 rpm - Saw blade mount: 30 mm - Max. saw blade diameter: 400 mm - Max. cutting height: 125 mm - Pneumatic tool clamping - With Festo LAS stop Weight: approx. 600 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL Iodpetnh Alefx Agzjik CONTROL FANUC 16I-MB YEAR 2003 TABLE SIZE 850.0 x 410.0 mm TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec MAX TOOL DIA 80.0 mm MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw PLUS SWARF TRAY COOLANT SYSTEM SET OF TOOLING SET OF MANUALS

Condition: new, Scope of delivery includes: Heavy-duty anchor, HST2 V3 M12x105 5-25 Order quantity: 25 pcs. Manufacturer: Hilti Version: Carbon steel, zinc-plated Approved for: cracked concrete Through-fix installation: + Pre-fix installation Diameter: M12 Drill hole Ø / Depth: 12 x 88 mm Nominal embedment depth: 80 mm Effective embedment depth: 70 mm Anchor length: 105 mm Clamping thickness: 10 mm Iodpfx Aowhfluegzeik Weight per piece: 0.100 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If shipping or delivery is required, additional costs will apply, which can be requested from us depending on the delivery location and scope.

Condition: used, Year of construction: 1986, Serial number: 606xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21730 Spesifikasjoner:  1986 modell Motortimer: ca 3000 6 sylindret Dutch motor Skiftet motor   HLR 438l hammer  Vernebur  Understell (se bilder)  Maskin bredde: 231 cm  Vinsj  Støvsuger  Lys  Video  Leveringsklar      Beskrivelse: Vi har en 1986 Tamrock DHA400 Borerigg m/ HLR 438L hammer for salg.  Riggen fungere, men feil og mangler kan forekomme og noe påkost må regnes med da den er ifra 1986. Iodpfxoxu A N Ue Agzsik Leveringsklar. Own weight: 1 Engine hours: 3000 Model: DHA400 Borerigg m/ HLR 438L hammer

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, drilling depth: 70 mm, spindle speed (max.): 2,800 rpm, workpiece weight (max.): 380 kg, drill spindle length: 834 mm, pressure: 7 bar, Vitap Alfa 27T Multi-Spindle Drilling Machine Number of spindles: 27 Spindle pitch: 32 mm Distance between outermost spindles: 832 mm Drilling depth up to: 70 mm Iodpexzzcaofx Agzsik Turret adjustment for drilling depth Drilling possible vertical-horizontal-45° Two pneumatic material clamps Adjustable drilling speed Motor power: 1.85 kW CE certificate Technical documentation Year of manufacture: 2004

Condition: excellent (used), Four-head paper drill. Several pieces available !!! Brand Hang Model 106DTK4 Details 4-head paper drilling machine With adjustable drilling heads Operation Electric foot switch, 2 speeds Available directly This additional information is standard for this model. Always check the details carefully during your visit. Iiodoudl Ikepfx Agzek The 1975 Hang 100DTK4 printing machine is an iconic and reliable piece of equipment that has made a significant impact on the printing industry. Manufactured by Hang, the machine offers advanced features for its time and set the standard for high quality and efficient printing. The Hang 100DTK4 features a robust and durable design, ensuring stability and consistent performance during the printing process. Its printing technology, although conventional by today's standards, allowed for precise and sharp prints with satisfactory resolution for its era. Equipped with user-friendly controls and mechanical automation, the machine offered programmable settings for various printing formats and configurations. Its operation required skilled operators who were able to achieve accurate and repeatable printing results. The printing machine's capabilities extended to a variety of substrates, including paper, paperboard and lightweight cardboard, satisfying a range of printing applications common at the time. Launched in 1975, the Hang 100DTK4 presented a technological advance for its era. Its sustained performance and contribution to the printing industry are remarkable. While newer printing machines with advanced digital technology have emerged, the Hang 100DTK4 remains a historic symbol of performance and innovation in the printing industry in the 1970s. The machine has collector's value and serves as a testament to the evolution of printing technology over the decades.

Condition: used, Year of construction: 1981, Used machine Iisdpfx Agsxx D D Iszjk Year of manufacture: 1981 Universal dowel boring machine with a swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gearbox motor 2.2 kW with 21 spindles Spindle pitch 32 mm with built-in oil damping Height adjustment 80 mm Drilling depth 80 mm With chassis Weight 420 kg Availability: short-term Location: Flörsheim

Condition: good (used), Reamer, twist drill, drill -Twist drills: different sizes on request -different manufacturers -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two-cutter Iijdpfx Asv H D N Rjgzjk -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 -Type: HSS

Condition: used, Year of construction: 1994, Some typical specifications for the TOS W75 machine are: Spindle diameter: approx. 75 mm. Spindle speeds: e.g. 18-1800 rpm. X-axis: approx. 1,250 mm. Y-axis: approx. 900 mm. Z-axis or W-axis: various values, e.g. 560 mm. Table size: approx. 950 × 950 mm. Iisdpfxoxw Uclo Agzsk Weight: approx. 10,000 kg All information provided without guarantee.

Condition: used, Year of construction: 1981, drill diameter 32 mm Iedpst Hwn Ajfx Agzoik drilling length 0 mm Universal Drill Bit Grinder lots of accessories

Condition: new, Year of construction: 2026, CNC bore and hinge insertion machine with magazine feeding for the automatic processing of hinges and hinge mounting plates. Robustness, durability and ease of use distinguish our automatic CNC controlled drilling and insertion machines. Short introduction: • CNC controlled hinge boring and inserter for high capacity • Flexibility through the CNC control Iodpfx Ajdx A U Hogzeik • Massive and robust drilling units • Inserting die made of steel for a long life time use • Solid wood drilling with standard 1,5 kW motor • Safety-control with metal-detector (option)

Condition: new, Year of construction: 2026, Bore and hinge insertion machine with magazine feeding for the automatic processing of hinges and hinge mounting plates. Robustness, durability and ease of use distinguish our automatic drilling and insertion machines. Iedpfx Agsdx A U Djzeik Short introduction: • Single and multi hinge boring and inserter for high capacity • Massive and robust drilling units • Inserting die made of steel for a long life time use • Solid wood drilling with standard 1,5 kW motor • Safety-control with metal-detector (option)

Condition: new, Year of construction: 2026, Bore and hinge insertion machine with magazine feeding for the automatic processing of hinges and hinge mounting plates. Robustness, durability and ease of use distinguish our automatic drilling and insertion machines. Short introduction: Iiedpfx Aodx A Urjgzsk • Single and multi hinge boring and inserter for high capacity • Massive and robust drilling units • Inserting die made of steel for a long life time use • Solid wood drilling with standard 1,5 kW motor • Safety-control with metal-detector (option)

Condition: new, Year of construction: 2026, Drilling and dowel inserting machine for simultaneous drilling, gluing and dowel inserting Iijdsdx Aw Njpfx Agzjk in the of System 32 mm through multi spindle drillhead and adjustable doweling stations. Short introduction: • Universal drilling and dowel inserting machine • Simplest operation • Closed gluing system • Suitable for panel and solid wood processing • Optional, additional vertical drilling unit • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: new, Year of construction: 2026, Dowel inserting machine with gun for simultaneous glue and dowel insertion. For professional and efficient dowel processing in furniture and framework. Short introduction: • Constant outstanding dowel length projection • Always constant and correct glue amount • Simple cleaning of the gluing system through EasyClean, the automatic cleaning program • Automatic rejection of dowels with the incorrect diameter and length through Auto-DL-Selekt Iijdpfx Asdx Abuogzek • Dowels are not inserted to the bottom of the hole, the outstanding dowel length projection is adjusted independent to the drilling depth • Recoilless, extra light and comfortable glue-dowel-inserting-gun • Great time saver compared to squeeze glue bottle and hammer