Used Dreher Rapid Air L 12 for sale (31)

Condition: used, material width:304,8 mm material thickness:0,12 - 2,2 mm feed length:304,8 mm clamping force of fastening pincer:850 N clamping force of moving pincer:4410 N feeding force:650 N weight of the machine ca.:0,15 t dimensions of the machine ca.:0,7 x 1,05 x 0,6 m Lrjdpfx Ajcxxrxeb Teh

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, Roller feeder with control system overhauled in 2020, but with low operating hours, due to acquisition of another company. Manufacturer: DREHER Model: WAV - RDS - 2 E 1125 Year of manufacture: 1993 Condition: very good / ready for use Strip width: 650 mm Material thickness: 0.8 - 7 mm Feed roller diameter: 125 mm, hardened and shot-blasted Feed speed: 137 m / min. Drive: servo motor, three-phase, Siemens Drive power: 5.7 kW Supply voltage: 230 V / 400 V - 50 Hz PLC control with operator panel Functions and settings: - Operation mode selection - Setup function - Preselection for intermediate venting - Feed length selectable in 0.01 mm steps Lrjdoyfwcljpfx Ab Tjh - Speed as percentage - Piece counter up to 99,999 - Machine parameters via NC control - Feed lengths and speed correction possible during automatic operation

Condition: used, machine/vehicle number: 29156, 27781, Decoiler Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 90 mm Material thickness: 0,8 - 5,0 mm Feeding speed: 3 - 30 m / min Standard configuration Extended machine accessories Lredpfxovg Iqxe Ab Tjh Insertion aidLoop bridge

Operating hours: 6,650 h, condition: good (used), machine/vehicle number: Delta 34/41, Please refer to the pictures and video for the condition and contents of the offer. The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for use. The purchase price includes VAT. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid Ust. Indent. No. Subject to prior sale. Visit our website and take a look at our other offers. Lredpfjtudxdsx Ab Teh Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m Ledpfx Abjcxxx Ro Torh with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 Ledpfewc U Izox Ab Tjrh roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: used, machine/vehicle number: 14039, Rotor diameter: 260 mm Rotor width: 410 mm Rotor knives: 3 Stator knives: 2 Infeed cross-section approx. 410x600 mm Lrodpfx Aboyi Idue Toh Drive motor: approx. 11 kW

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. Robust construction, proven VEM 7.5 kW motor, three-phase 400 V power supply. The machine features a large feed hopper, convenient service access, and an electrical control cabinet with emergency stop button. The installed low-speed three-phase motor ensures high shredding power with stable operation. • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm • Throughput suitable for medium and large injection moulding machines • German manufacturing quality Ledpovyumyofx Ab Tsrh • Sturdy frame and knife assembly Very good condition, mechanically inspected, ready for operation.

Condition: excellent (used), Sheet width - max.: 200 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Ljdpjylc S Ssfx Ab Terh Driven infeed and outfeed rollers Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 2.0 mm Weight: 170 kg Infinitely variable feed speed Right and left rotation Operating mode selector switch for manual and automatic operation Belt loop control Very good condition A decoiler can also be purchased.

Condition: used, Price: On request Lrsdpfsyfguqox Ab Tjh Shredder Dreher S26 Type: S26/26 No.: K4727 Hopper opening: 250 mm x 400 mm Motor: 4kW 380Volt 8.3Ampere - Documentation available: No - CE certificate present: No - Serial number: K4727 - Main motor power [kW]: 4 - Number of shafts [pcs.]: 1 - Opening width [mm]: 250 - Opening length [mm]: 400 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Ljdpfxsycnf Sj Ab Tjrh Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: used, Year of construction: 1994, material width 650 mm coil weight 3,5 t material thickness 0,8 - 3,0 mm Lrodpfsvut Sdox Ab Tjh no. of straightening rolls 7 straightening roll diameter 80 mm number of inlet rolls 4 coil internal diameter 460 - 530 mm coil external diameter 1400 mm weight straightener 1,0 t weight decoiler 0,9 t dimensions straightener (WxDxH) 1,5 x 1,9 x 2,0 m dimensions decoiler (WxDxH) 2,2 x 1,8 x 1,9 m Feeder-straightening machine DREHER 1676 E/RDS Modell 1529/4 with infinitely variable drive Decoiler DREHER 2380 FM-FPS Modell 891/5 motoric driven. with pneumatic lag brake, manual centralized expansion, pneumatic snubber roll coil loop control Ultrasonic

Condition: used, Double coiler, coiler, decoiler, for sheet metal processing, punch, eccentric press, hydraulic press, punching machine Leded Nttnjpfx Ab Torh -Handover in the current condition as seen -Drive: without -Max. Recording: Ø 590 mm -min Recording: Ø 250 mm - Recording width: 300 mm -Dimensions: 1460/1000/H1400 mm -Weight: 332 kg

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: A-08/420, Feeding and Straightening Machine Manufacturer: DREHER Model: 1676 Year of manufacture: 1990 Lodpfoyfv A Dsx Ab Tjrh Strip width: 500 mm Material thickness: 0.8 - 5 mm Straightening roll diameter: 80 mm Number of straightening rolls: 7 Feeding roll diameter: 80 mm 2 exit rolls diameter: 80 mm Adjustable entry height Passage: 505 mm Oiling unit Roller basket Strip guide: 505 mm

Condition: used, Year of construction: 1994, machine/vehicle number: 940082, Decoiler Lrjdpfxjuqc Hre Ab Tjh Coil weight: 2 x 2 ton Material width: 380 - 500 mm Coil exterior diameter: 1.300 - 1.400 mm Expansion range: 445 -530 mm Leveller / Straightener Material width : 40 - 500 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pinch rolls: 2 pcs. Diameter of the drawing rolls: 60 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 1,6 mm Cross section: 800 sq mm Feeding speed: 0 - 30 m / min Required power: 3 kW

Condition: used, Year of construction: 2011, Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW Lodpfsuqfa Iex Ab Tsrh Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm

Condition: used, - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lodpfowh Nacex Ab Torh Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 1,400 mm, total height: 2,050 mm, total width: 1,400 mm, Empty weight: 500 kg Ljdpfx Aswh Naiob Terh Price: On request Granulator Dreher S26/26 VS Machine No. K 8329 Built in 1982 Engine 5.5kW Speed 1440 Rpm. 2 fixed blades 3 rotating blades (need to be replaced) Funnel opening: 360x240 mm Interchangeable strainer Sieve holes 6mm - Documentation available: No - CE certificate present: No - Main motor power [kW]: 5.5 - Rotation speed [rpm]: 1440 - Opening width [mm]: 360 - Opening length [mm]: 240 - Sieve perforation [mm]: 6 - Number of rotating knives [pcs.]: 3 - Number of fixed knives [pcs.]: 2 - Transport dimensions: 1400mm x 1400mm x 2050mm (l x w x h) - Transport weight [kg]: 500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Price: On request Shredder Dreher S20/20 Lrodswh I Uxopfx Ab Tsh No.:K2740 Funnel opening: 310mm x 340mm Motor: 3kW 6.3 Amps 380 Voltage - Documentation available: No - CE certificate present: No - Main motor power [kW]: 3 - Opening width [mm]: 310 - Opening length [mm]: 340 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), functionality: fully functional, Mill with extraction system, sound-attenuating enclosure Power: 4 kW Lsdsvzzx Espfx Ab Tjrh All functions tested and fully operational!

Condition: used, Year of construction: 1995, sheet width 300 mm Lredpsr Hginsfx Ab Tsh coil weight 1,5 t coil internal dia. 400 - 500 mm je Arm 670 mm total power requirement kW weight of the machine ca. 760 kg dimensions of the machine ca. T 1,23 x B 1,7 x H 1,1 m

Condition: used, machine/vehicle number: 12464, Rotor diameter: 420 mm Lodpskyy U Usfx Ab Tsrh Rotor width: 650 mm 5-knife rotor 2 rows stator knives Inlet cross section approx. 420 x 650 mm Drive motor: 37 kW

Condition: used, machine/vehicle number: 13222, Rotor diameter: 260 mm Rotor width: 820 mm Lsdowbww Ajpfx Ab Tsrh Rotor blades: 5 rows of 2 blades each Stator blades: 2 rows of 2 blades each Inlet cross-section approx. 820 x 260 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 13110, Rotor diameter: 260 mm Rotor width: 400 mm Rotor blades: 3 Stator blades: 2 Inlet cross-section approx. 400 x 340 mm Ledpewfigkjfx Ab Tsrh Drive motor: 11 kW

Condition: used, machine/vehicle number: 11415, Rotor diameter: 260 mm Rotor width: 260 mm 3-blade rotor, 2 rows of stator blades Inlet cross-section approx. 260 x 260 mm Drive motor 5.5 kW Ledpfx Absghgl Io Tsrh Grinding mill with built-in feeder for bar stock. Weight approx. 500 kg