Used Drum Parts for sale (16,638)

Condition: like new (used), ⚙️ Studer S30-1 CE ⚙️ 🔹 High-precision cylindrical grinding machine for external and internal grinding. Kdjdpozu Iyfjfx Aiior 📐 Main features: ↔️ Distance between centers: 1000 mm 📏 Height between centers: 175 mm 🇪🇺 CE marking 🔄 COMPLETE RETROFIT The guideways have been refurbished, bearings replaced, the installation and electrical cabinet have been renovated, a complete paint job has been performed, and the geometry has been adjusted to restore the machine's original precision. ✨ An alternative to purchasing a new machine: thanks to the complete retrofit, it offers a level of precision, reliability, and performance comparable to that of a new machine, with a considerably lower investment. 🧰 Wide range of accessories available. 📅 Delivery time: please inquire. 🏷️ Project reference: OP25-007

Year of construction: 1986, condition: used, functionality: fully functional, Equipment: documentation/manual, BVL Rotocleaner 750 The cleaning and degreasing system with steam extraction fan and oil skimmer is in good used condition. Manufacturer: BVL Oberflächentechnik Year of manufacture: 1996 In 2011, the washing machine was completely overhauled, and the gear motor, heating element, gas spring, and heater were replaced. Automatic basket washing system with removable rotating basket. Basket diameter: 720 mm (inner diameter) Basket height: 140 mm (inner height) Max. usable height (wash load): 450 mm Max. batch weight: 500 kg External dimensions: Width 1190 mm, Depth 1170 mm, Height 1170 mm Weight: 290 kg Operating manual, technical documentation, and CE declaration of conformity for the system are available. The housing of the cleaning system and the associated pipelines are made of stainless steel. Cleaning is carried out using a special nozzle system with wide-angle nozzles and a driven rotating basket. A U-shaped spray system ensures easy operation and high efficiency. The nozzles are supplied by a powerful circulation pump, which ensures intensive treatment and is equipped with a carbide mechanical seal. Heated tank in the lower part of the system. If the liquid level drops below a certain point, a fixed water connection ensures automatic refilling. This ensures safety for the heating elements and pump, as well as clean and accurate metering of the required amount of water. Internally located return baskets filter out coarse dirt from the washing solution. A fume extraction system removes steam before the hood is opened. The lid is supported by a gas spring. Simple handling of the filling system enables a fast workflow. Loading via crane is possible. Kdedowzwfgepfx Aiier Price: Negotiable Our asking price is €2,200 net, ex works, plus packaging costs. All technical specifications are subject to typographical errors and omissions. Sale is limited to EU countries only.

Condition: excellent (used), functionality: fully functional, Commissioning: as Okuma stock machine 09.2017 Control OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor with 32 kW output Torque 955 Nm ▪ Hollow clamping cylinder Ø 127 mm SMW VNK 320-127 with bore Ø 127 mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance self-cleaning function ▪ Drum sump filter TMF300 with clean tank 980 l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for the lower turret) ▪ Automatic door ▪ Robot interface type E for connecting other loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in a CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22 kW / 700 Nm / 50–4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2-stage Range switching at full speed ▪ Lower turret: 12 stations Kdodpfx Aisyviigsior In ZB-axis with cylindrical roller guide In XB-axis with slide guide ▪ Real-time collision avoidance system CAS ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touchscreen/panel with vertical display and tiltable keyboard (adjustable angle) ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° steps ▪ Y-axis with travel +150/-150 = 300 mm ▪ B-axis 240° Positioning in 0.001° steps ▪ Tool spindle (Okuma motor spindle): 22 kW / 120 Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. pressure 20 bar Including bag filter, external cooling tool spindle, pump with max. pressure 3 bar ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement system (with standard chuck) for safe setup ▪ Machine management MacMan with integrated BDE (operating data acquisition) ▪ Parts program memory 2 GB ▪ Max. length individual part program 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation via periodic speed change ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection) ▪ Coordinate conversion (shift, rotate) ▪ Electronic spindle orientation + / - 0.1°

Condition: new, CAR SPARE PARTS STOCK LOT. We have various stock lots consisting solely of new car spare parts from 2000 to today. New and original spare parts from the most important European brands. Mechanical, electrical and electronic parts – from suspension components to engine spares. Kdsdpjyziidofx Aiior

Year of construction: 2023, condition: excellent (used), 2023 Vixen Surface Treatments 2 Stage FL250 Industrial Parts Washer Front Pneumatic Vertical Loading Door Dimension W2,690 x H1,910mm. Voltage 400V. S/No. 3177 (2023). Please note a loading charge of £50 + VAT to be added to buyer's invoice. With Extractor Fan, Pumps, Filtration, Signal Tower, Loading Trolley, Staging & Wash Gun. Overall Dimensions W3,300 x D4,440 x H2,800mm. Kdedpfxszt R E Us Aiier

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,100 mm, power: 19 kW (25.83 HP), DM1100 DC EVO Removal of solid slag Edge rounding up to 1100mm width. DM1100 DC EVO deburrs and rounds inside and outside contours of thick steel parts, mainly cut with plasma or oxyfuel. The DM1100 DC is equipped with a large deburring roller for removing heavy burrs and two counter-rotating cross belts. These ensure that the edges are rounded with even and soft edges. This machine impresses with a vertically movable sanding roller to compensate for tolerances and a wide magnetic range to ensure that even small parts can be processed safely. DM1100 DC Working capacity (mm) 1100x120 No. sanding rollers (D) 1 No. of cross belt stations (C) 1 Sanding drum specifications Ø435mm 20SH Sanding belt, dimensions (mm) 1150x1520 Sanding drum speed (rpm) 185-650 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.5-4.0 Sanding drum motor (kW) 11 Cross belt motor (kW) (2x) 3 Feed motor (kW) 0.37 Total power (kW) 19 Rod suction connection per head (Ø mm) (2x) 150 Kodpetzkg Uefx Aiisdr Dimensions (mm) 2258x2900x2220 Weight (kg) 4100

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 15 h, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding The SCHORR RR200THX is a powerful drum wood chipper designed for professional use. It easily processes branches and trunk sections up to 200 mm in diameter and impresses with its robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, this chipper delivers ample power for daily tasks in gardening, landscaping, and forestry. The electric start (e-starter) ensures comfortable and reliable startup—even in cold temperatures. The self-feeding cutting system, featuring 2 blades and 1 counter-blade made of hardened steel, guarantees a clean chipping result and consistent material flow. The large feed opening allows for quick and safe material input, even with heavily branched wood. The discharge chute is rotatable 360°, allowing you to direct the wood chips precisely—into piles, trailers, or big bags. Advantages - Self-feeding: No manual pushing required - E-starter: Convenient push-button starting - Robust cutting system: Hardened steel blades for long service life - Heavy-duty steel frame: Stable, torsion-resistant, and durable - 360° discharge chute: Flexible direction of chip output - Easy maintenance: Simple access to blades, filters, and oil - Mobile: Drawbar with parking brake for secure stationary placement and transport Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Max. branch thickness: 200 mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter-blade Weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Kdodpfozilarsx Aiior Overall height: 1550 mm Discharge chute angle: 360° Engine power: 19 kW / 25 HP Displacement: 764 cc Starting system: E-starter The RR200THX is built for long-term use. All components are easily accessible, allowing maintenance to be carried out quickly. Spare parts are available from stock at any time. Upon request, we offer technical service and repairs in our own workshop or directly at your site. Financing Leasing or installment payment available—please contact us for details.

Condition: used, Year of construction: 2005, functionality: fully functional, HOLZ-HER 6110 CUT 70 Panel Saw Ksdpfx Aijzp U Raeiedr A HOLZ-HER 6110 CUT 70 panel saw is for sale, designed for precise cutting of chipboard, MDF, and other panel materials. The machine is located in Labin (Istria, Croatia). Price: 25,000.00 EUR Service and Condition The machine is regularly serviced. A new computer and a new label printer were installed a few months ago. It is ready for immediate use. The CUT 70 model is designed for fast and precise cutting of panel materials and enables reliable and efficient production in carpentry workshops and industry. If you are interested in purchasing the entire production facility, please contact us. We will be happy to discuss a serious offer. The following are also available in the facility: HOLZ-HER Eco Master 7120 CNC machining center HOLZ-HER Sprint 1321-2 STUF edge bander Lazzari UNO 3000i circular saw Polymac curved edge bander Polymac ABS edge trimming machine Busellato jointer Table router for making grooves Overhead router Contact: Damir Verbanac 📞 +385 91 22 55 349 Also available via WhatsApp or Viber.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Kdodpszizkyofx Aiijr Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, A full coating unit, with its equipment, designed for coating products by means of a continuous or discontinuous spraying process. Additional documents : Plan implantation équipements + système cip . pdf 1 Glatt GC 750/500 coating unit – drive motor : 1,1 kW – 380 V – 50 hz – IP 54 – Ex - ventilateur d'entrée d'air : 1000 m3/h - 6860 trs/min - 2’003 Pa - Max 80°C - 1,1 kW - IP 54 – air inlet fan : 1000 m3/h – 6860 rpm – 2’003 Pa – Max 80°C – 1,1 kW – IP 54 – air outlet fan: 1200 m3/h – 2900 rpm – 1’030 Pa – Max 80°C – 7,5 kW – IP 55 – Drum speed: 2 – 18 rpm – Sold with two perforated drums ⌀500mm and ⌀750 mm Kdsdpfx Asx R Amneiier – Adaptable 2-head spray arm + Peristaltic pump– Spare parts, seals, … - Capacity : 20L : 7 to 15 kg 60L : 30 to 45 kg 1 Dust collector Herding FilterTechnik Extraction air volume: 1200 m3 / h Extraction air volume: 1200 m3 / h 1 Wanson CD-36 steam boiler - Power: 36 kW – Steam output: 48 kg/h – Operating pressure: 5 bar – Temperature : 159°C – Water volume: 10 L 1 Cleaning system (CIP) Used for easy cleaning and maintenance of the machine.

Condition: used, Tornos CNC-controlled multi-spindle automatic lathe Type/Model: Tornos MultiDeco 20.6 Condition: used Operating hours: 45,300 h Bar stock: Ø 5-22 mm Max. part length without secondary operation: 100 mm Max. part length with secondary operation: 80 mm Spindle rotation speed up to: 4000 rpm Max. spindle power: 15 kW Max. drilling/internal threading power: 3.7 kW Kdedpfjzgwtxsx Aiior Counter-spindle motor power: 1.1 kW Number of numerical axes: 17 Axial slide: 5 Cross slide: (radial and axial) 5 (Pos. 1 to 5) Facing slide: 1 CNC-controlled secondary operation slide with up to two secondary operation tools (Pos. 7) Connection value: 35 kW Dimensions (L x W x H): approx. 8053 mm x 1508 mm x 2210 mm Weight: approx. 8500 kg Equipment/Accessories: - Control system: Tornos PNC Deko - HIRTH - Gear cutting drum locking system - Spindle stop at Pos. 4 (activated via installation curves) - 2 quick-change drilling spindles XC06020.01; GWS Modular 40004; up to 80 bar - 3 fixed drilling units GWS Modular 40004; up to 80 bar - 7 base plates for tool holders GWS 60 AD60032 (Göltenbodt) - 7 base holders for turning tools GWS 60/41 (Göltenbodt) - Bar feeder integrated: TORNOS MSF 522/6 - Material guide channel for bar feeder - CO2 extinguishing system Kraft und Bauer - Oil treatment system Knoll: VRF 500/1550 - 2 high-pressure pumps, each 40 L/40 bar - 1 pump, 20 L/35 bar - Oil capacity approx. 2000 liters - Chip conveyor Knoll - No discharge chute

Condition: used, Year of construction: 2002, operating hours: 3,680 h, Internal vehicle number: G400103 Available immediately at our site in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) HAMM tandem roller with vibration and oscillation, TYPE DV 08V Super complete in standard configuration with CE marking and declaration of conformity, including: - ROPS-integrated driver's cab - Cab heater - Sound insulation - Edge compaction & cutting system - Cutting wheel - Pressing roller, 45°, 5 cm surface - Track indicator for KAG (bulk goods handling) - Hydraulic connection - Asphalt temperature indicator - TÜV (Technical Inspection Association) approval - On-board tools and documentation - Seat belt Special paint: RAL 8017 / 1001 - Fuel tank, 155 liters Total compaction force: 288 / 323 kN Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. Kdsdpey Ekncefx Aiisr GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), total length: 1,300 mm, total width: 1,150 mm, total height: 1,200 mm, overall weight: 600 kg, input voltage: 400 V, mesh size: 3 mm, Baader 603 We offer for sale the Baader 603 industrial meat separator, designed for meat recovery (MSM/MDM) from poultry, fish, and red meat. The machine utilizes gentle separation technology with a pressure belt and perforated drum, ensuring high raw material yield while maintaining the quality of the final product. Technical Specifications: Model: Baader 603 Capacity: up to 2200 kg/h Power: approx. 4 kW Power supply: 400 V / 50 Hz Weight: approx. 600 kg Dimensions: approx. 1300 × 1150 × 1200 mm Drum perforation diameter: 3 mm (depending on configuration) Applications: - Poultry meat recovery (chicken, turkey) - Fish meat separation - Meat recovery from slaughtered parts Production: - MSM / MDM - Meat fillings Kdjdpfjy I Tbqsx Aiisr - Pâtés and delicatessen products - Semi-finished products for the food industry SEPARATOR / BAADER / SIEVE / POULTRY / FISH

Year of construction: 2009, condition: used, functionality: fully functional, machine/vehicle number: 001-2009, MAPSFERA 1 09 METAL SORTING LINE, consisting of a vibrating feeder, conveyor belt, head magnetic pulley, and eddy current separator, designed for efficient automatic separation and recovery of ferrous and non-ferrous metals in industrial recycling applications. • Manufacturer: MAPSFERA • Model: 1 09 • Configuration: vibrating feeder + conveyor belt + magnetic pulley + eddy current separator • Application: separation of ferrous and non-ferrous metals from mixed waste streams • Status: available for inspection • Current condition: dismantled / stored The system is designed for continuous industrial operation in material recovery and recycling plants, enabling highly efficient metal sorting from mixed input streams. The vibrating feeder ensures a controlled and uniform material flow, while the conveyor system transports the material through the various separation stages. Kjdpfxszbtrzs Aiiedr The head magnetic pulley removes ferrous metals, and the eddy current separator allows for the effective separation of non-ferrous metals such as aluminum and copper, improving overall recovery rates and material purity.

Condition: used, Year of construction: 2022, operating hours: 289 h, functionality: fully functional, machine/vehicle number: B0201, total width: 2,450 mm, total length: 6,050 mm, total height: 2,700 mm, empty load weight: 9,600 kg, Our FEED VIBRO features a combination of feed hopper, leveling roller, and dosing slide, ensuring consistent material feed. Thanks to the integrated drum magnetic separator with selectable strength, magnetic particles can be sorted. If pure dosing without magnetic separation is required, the magnet system can be deactivated. Kodpfxsxrtt Sj Aiijdr This module is part of our rental fleet.

Condition: as good as new (ex-display), Year of construction: 2015, We have a Xante Impressia digital printing system available. The Xante Impressia printing system is specially built for printing envelopes! System can also print documents of course ranging up to A3 and 300 gr/m2! Kodpfxed Tfiue Aiiodr This Xante Impressia just came in. Year is 2015 and counters are 317.152 color and 19.901 prints black. but the printer is in good working condition. Of course all the drums and toners are in the machine. This is part of the printer. Please contact us to get a hold of this machine for a super discount price!

Condition: used, mileage: 105,942 km, power: 375 kW (509.86 HP), axle configuration: 6x6, color: brown, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2021, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel will be happy to assist you by phone. Mercedes-Benz Arocs 3351 LS tractor unit with timber crane Ksdpjyfvrxofx Aiisdr Crane: Palfinger S260Z96, 3,106 operating hours. A1E front axle 9.0 t, A1W differential lock on front axle, A2G rear axle, ring gear 300, planetary, 13.4 t, A5Y axle ratio i = 4.333, B1B electronic braking system with ABS and ASR, B1Z ABS switchable, B2B drum brakes on front and rear axles, B2X electronically controlled parking brake, B2Z additional parking brake on front axle, B4M air tank, steel, C0G frame overhang 1050 mm, C2I wheelbase 4200 mm, D0E steering wheel, diameter 500 mm, D0S compressed air connection in cab, D1C comfort driver's suspension seat, D1N co-driver's functional seat, D2N seat backrest release, driver's seat, D3B lower comfort bed, D3Q velour seat upholstery, D4T curtain across bed(s), D4Z sun roller blinds, side, driver and passenger side, D6C electric stationary air conditioning, D6G automatic climate control, D6I residual heat usage, D6M hot water auxiliary heater in cab, D7A additional thermal insulation, D7G storage compartment cover, driver and passenger side, D7R storage compartment flaps above windscreen, D7V table on passenger side, D7Y luggage shelf, upper rear wall, D8N electric pop-up roof, E4B interface for fleet management system (FMS), E5H night driving light switch, E6A trailer socket 24 V, 15-pin, E6Z reverse warning system, E9G pre-installation for electrical devices, F0G side module, N3G vehicle version, F1W L-cab, StreamSpace, 2.30 m, 320 mm tunnel, F4X left external storage compartment hatch, F5L external sun visor, transparent, F5Y A-pillar trim, F6C tinted windscreen, F6I heated front mirror, F6Q air horn, F6T MirrorCam, F7B bumper, corners steel, F7D bumper, center part with towing eyes, coupling jaw, F7Y cab entry left/right, movable, F8E central locking system, F8F comfort locking system, F8V light sensor, F8W rain sensor, G0A drive train for 44 t to 68 t, G0R optimized transmission mounting arms, G0T Predictive Powertrain Control, G0W offroad driving mode, G2F transmission G 330-12/11.63-0.77, G4E transfer case VG 3000-3W, 1.04 selectable, G5B twin-plate clutch, G5G Mercedes PowerShift 3, I2H tubeless tires 315/80 R 22.5 rear axle, I2P tubeless tires 385/65 R 22.5 front/leading/non-leading axle, I4J axle configuration 6x6, I5H 33-ton gross vehicle weight, I6I vehicle produced in Wörth, J1O digital tachograph, 2nd generation, ADR, J1S tachograph manufacturer VDO, J2K 2-way speaker system, J2U navigation system, J3U required for Fleetboard Manager App, J3V Truck Data Center 7, J6C interactive multimedia cockpit, J6Y Remote Online, J6Z pre-installation for Mercedes-Benz Truck App Portal, J8Y pre-installation for Truck Data Center 7, J9A pre-installation for CB radio, 12 V, DIN slot, J9D pre-installation for toll system, J9P pre-installation and display for up to 4 cameras, JAAY rear axle spacing after shifting 2nd rear axle 1450mm, JBWZ adaptation AO air tank, JBXJ EAPU relocated as per drawing number "X", JC0E frame overhang 950 mm, JCDA stabilizer for conversion to air suspension on rear axle, JCMX shortened overhang, JJ3Z axle load measuring system, JKVT tank relocated to 1925 mm, JQ3Y frame lowering without airbag residual pressure control, JQHL air suspension on rear axle with ENR, K3V AdBlue tank 60 l, left, K5A tank 290 l, left, 650 x 565 x 950 mm, steel, L1I fog lights, LED daytime running lights, L2H flashing side marker lights, L9A pre-installation

Condition: used, mileage: 665,843 km, power: 294 kW (399.73 HP), first registration: 06/2014, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: green, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, Tel.: Call us (Contact, Telephone, Mobile, WhatsApp) Special equipment: Mobile phone antenna, work lights (2) on the cab roof, audio system: MAN Media Truck Advanced 12V radio with navigation system preparation, exterior mirrors and wide-angle mirrors, electrically adjustable and heated, curb mirror left electrically adjustable and heated, curb mirror right electrically adjustable and heated, compressed air tank made of aluminum, cab: with air suspension, comfort driver's seat, air-sprung and heated, with lumbar support and shoulder adjustment, flame starter system, transmission: 12-speed - type: ZF 12 AS, Tipmatic, rocker lever - EVBec-regulated brake, automatic climate control, fuel tank: combined tank aluminum - 400 liters diesel + 60 liters urea solution (AdBlue), multi-function steering wheel, light alloy wheels 9.00x22.5 (ALCOA matte on the 1st rear axle), light alloy wheels 9.00x22.5 (ALCOA matte on the 1st front axle), auxiliary air heater Eberspächer D4S, auxiliary drive NH/1C without flange, sliding/lifting roof electric, headlight protection grille, seat cover / upholstery: comfort quality, exterior sun visor, sunshade for side window, driver's door, sound system, power outlet in the cab 12V and 24V, control module for fleet management system, additional long-range/fog lights with cornering light Additional equipment: Kodjkq Akyopfx Aiijdr Axle configuration: 4x2, approach/front mirrors, trailer socket 24V / 7-pole, trailer socket ABS, anti-slip regulation (ASR), battery 175 Ah, on-board computer MAN-Tronic, differential lock rear axle, electronic braking system MAN-Brakematic, EURO 6 engine, cab: LX, suspension: leaf spring / air, electric windows, windshield tinted, generator 28 V 80 A, body/structure: semi-trailer tractor, rocker lever - EVB brake, fuel filter heated, air intake raised, air compressor 1-cylinder 360 ccm, air dryer, engine 10.5 liters - 294 kW diesel, wheelbase 3600 mm, spare wheel lift on the side, fifth wheel coupling: Jost JSK 37 C, disc brake front axle, rear side windows tinted, sunshade for windshield, spray mist reduction, stabilizer on one rear axle, stabilizer front axle, bumper in steel design 3-part, drum brake rear axle, door windows tinted, viscous fan, front axle VOK-08 cambered, central locking, permissible total weight 18.00 t * VIN: WMA06SZZ3EW199810 * First registration: 27.06.2014 * Engine bearing damage * Price net * All information without guarantee

Condition: good (used), functionality: fully functional, power: 70 kW (95.17 HP), fuel type: diesel, color: white, empty load weight: 13,400 kg, Year of construction: 1999, operating hours: 7,540 h, Equipment: cabin, Cat CB-535B roller, year 1999 with 7,540 operating hours, weight 13,400 kg, immediately ready for use, transport and delivery possible, we also prepare customs/export documents, inspection by appointment also possible on weekends. Kdsdpsyuzpnsfx Aiisr

Condition: good (used), Year of construction: 2016, total length: 2,500 mm, total width: 1,300 mm, total height: 1,600 mm, overall weight: 927 kg, input voltage: 400 V, power: 2.7 kW (3.67 HP), tank capacity: 1,000 l, Nowicki MA-1000 PSCH Tumbler with cooling The Nowicki vacuum tumbler with a capacity of 1.000 liters with the cooling option (with the cooling unit included) designed for plasticizing muscles, meat parts, small meats as well as poultry carcasses and parts in a vacuum. It ensures high quality of manufactured sausage products Design advantages:  acid-resistant design  precisely selected shape of the drum and tumbler blades system  microprocessor controller  smooth regulation of all massage parameters  maintenance-free vacuum regulation system  multi-stage protection system for the vacuum pump  technological hole  brine intake valve  pulsating vacuum  possibility of massaging in a replaceable (gas) environment  computer system for monitoring device operating parameters Manufacturer: Nowicki Model: MA-1000 PSCH Year: 2016 Capacity: 1.000 liter (500 kg.) Power: 400V / 50Hz / 2,7kW Machine dimensions LxWxH: 2.500x1.300x1.600 mm Kdedpfozlpa Iex Aiijr Machine weight: 927 kg.

Year of construction: 2025, condition: new, DOLFİN- VDL series Drum (Spiral) parts washing machines are used particularly for the purpose of cleaning small parts that are manufactured in large quantities and in bulk. The materials that are poured from the inlet part of the spiral drum in the device are directed towards the outlet part of the drum with the spirals inside the drum. While the drum moves in its own axis according to the set rotation speed, it subjects its parts to, respectively, washing (degreasing), rinsing, passivation and drying processes (varies per the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively within a single device. Full penetration is ensured by pressurized spraying and dipping effects in each section. It is a very functional model of us that is used particularly for washing the bolts, nuts, washers, or such small parts, fittings, nipples, couplers and fittings that are processed in CNC and automated machines in high quantities. Regardless of the metal type of the parts to be washed, they are fully compatible with steel, brass, aluminum copper or stainless steel materials. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device operates continuously in accordance with the values of the washing parameters that have been entered from the control panel before operation. Parts that come out of production in bulk can be loaded into our device in 3 different manners. 1. With Vibrating Loading Chamber, 2.With Lift Conveyor, 3. By coupling to our Customer's existing system, Do not hesitate to contact for more information. Kdsdpfx Aiev S Dk Ssijr We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: good (used), Year of construction: 2010, total length: 2,035 mm, total width: 1,035 mm, total height: 1,015 mm, overall weight: 400 kg, For Sale: Conveyor table from Köning Brand: König Type: Conveyor table 800 mm Belt width: 800 mm Conveyor height: 850 mm max Year of manufacture: 2010 It is possible to view this machine on site. If you have any questions, please do not hesitate to contact us. Kedpfezvfh Aex Aiisdr Sincerely, Leo Holland

Condition: good (used), Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 192 mm -Drum length: 465 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30/60 mm -other sizes also available in stock -Number: several engines available Kjdpfx Aisb A I I Asiodr -Weight: 70 kg

Condition: good (used), Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 184 mm -Drum length: 460 mm Kdodpfxeb A I Izs Aiior -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 70 kg

Condition: new, Year of construction: 2023, functionality: unexamined, Equipment: CE marking, New, high capacity, Pallmann chipping line for sale. Specification: Cross feeding chain conveyor; Inclined separator, reversible; Longitudinal chain conveyor, reversible incl; Cleaning roller conveyor; Flat belt conveyor with metal-free zone, reversible; Metal detector; Kodjw Uqqnjpfx Aiiodr Crane for contaminated material; Vibratory feeding table; Drum chipper „ORIGINAL PALLMANN“, type PHT 850 x 1250 with mechanical clamping system (3 knives-rotor); Auxiliary exhaust system; Trough belt conveyor for bark; Scraper conveyor; Double screw conveyor; Trough chain conveyor, type Z-1600/2; Electric design & automation.